[ 0.000000] Linux version 6.12.33+deb12-amd64 (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.12.33-1~bpo12+1 (2025-07-09) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.33+deb12-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf04fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf05000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] DMI: Memory slots populated: 4/4 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.200 MHz processor [ 0.002380] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002383] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008694] AGP: No AGP bridge found [ 0.008753] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008759] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008761] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010530] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010537] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.015979] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] [ 0.016000] Using GB pages for direct mapping [ 0.017470] RAMDISK: [mem 0x270c5000-0x2f859fff] [ 0.017479] ACPI: Early table checksum verification disabled [ 0.017482] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.017487] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017493] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.017498] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240827/tbfadt-611) [ 0.017502] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.017506] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.017509] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.017513] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017517] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.017520] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.017524] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.017527] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.017530] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.017533] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] [ 0.017535] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] [ 0.017536] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] [ 0.017538] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] [ 0.017539] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] [ 0.017540] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] [ 0.017541] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] [ 0.017542] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] [ 0.017543] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] [ 0.017544] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] [ 0.017615] No NUMA configuration found [ 0.017616] Faking a node at [mem 0x0000000000000000-0x000000063effffff] [ 0.017628] NODE_DATA(0) allocated [mem 0x63efd3680-0x63effdfff] [ 0.017991] Zone ranges: [ 0.017992] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.017994] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.017996] Normal [mem 0x0000000100000000-0x000000063effffff] [ 0.017998] Device empty [ 0.017999] Movable zone start for each node [ 0.018002] Early memory node ranges [ 0.018003] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.018005] node 0: [mem 0x0000000000100000-0x00000000bdf04fff] [ 0.018006] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] [ 0.018008] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] [ 0.018009] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] [ 0.018010] node 0: [mem 0x0000000100001000-0x000000063effffff] [ 0.018013] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] [ 0.018020] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.018064] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027901] On node 0, zone DMA32: 3876 pages in unavailable ranges [ 0.027927] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.027942] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.028844] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028908] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.029158] ACPI: PM-Timer IO Port: 0x808 [ 0.029168] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.029177] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.029180] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.029183] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.029185] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.029189] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.029190] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.029200] CPU topo: Max. logical packages: 1 [ 0.029201] CPU topo: Max. logical dies: 1 [ 0.029202] CPU topo: Max. dies per package: 1 [ 0.029208] CPU topo: Max. threads per core: 1 [ 0.029209] CPU topo: Num. cores per package: 8 [ 0.029210] CPU topo: Num. threads per package: 8 [ 0.029211] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.029230] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.029233] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x000fffff] [ 0.029235] PM: hibernation: Registered nosave memory: [mem 0xbdf05000-0xbee28fff] [ 0.029237] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] [ 0.029238] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] [ 0.029240] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0x100000fff] [ 0.029242] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.029244] Booting paravirtualized kernel on bare hardware [ 0.029246] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034977] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.036139] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 0.036147] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 0.036151] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.036173] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.33+deb12-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.036245] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.12.33+deb12-amd64", will be passed to user space. [ 0.042904] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.046283] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.046379] Fallback order for Node 0: 0 [ 0.046384] Built 1 zonelists, mobility grouping on. Total pages: 6279885 [ 0.046386] Policy zone: Normal [ 0.046397] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.046399] AGP: Checking aperture... [ 0.052703] AGP: No AGP bridge found [ 0.052704] AGP: Node 0: aperture [bus addr 0xb4de000000-0xb4dfffffff] (32MB) [ 0.052706] Aperture beyond 4GB. Ignoring. [ 0.052707] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.052707] AGP: Please enable the IOMMU option in the BIOS setup [ 0.052708] AGP: This costs you 64MB of RAM [ 0.052710] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.052714] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] [ 0.052776] software IO TLB: area num 8. [ 0.109463] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.109678] ftrace: allocating 45657 entries in 179 pages [ 0.123618] ftrace: allocated 179 pages with 5 groups [ 0.124865] Dynamic Preempt: voluntary [ 0.125116] rcu: Preemptible hierarchical RCU implementation. [ 0.125116] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.125118] Trampoline variant of Tasks RCU enabled. [ 0.125119] Rude variant of Tasks RCU enabled. [ 0.125119] Tracing variant of Tasks RCU enabled. [ 0.125120] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.125121] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.125139] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.125142] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.125144] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.130604] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.130824] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.130926] spurious 8259A interrupt: IRQ7. [ 0.134248] Console: colour VGA+ 80x25 [ 0.134251] printk: legacy console [tty0] enabled [ 0.134516] ACPI: Core revision 20240827 [ 0.134675] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.134689] APIC: Switch to symmetric I/O mode setup [ 0.135041] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.154691] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c962fd0854, max_idle_ns: 440795256420 ns [ 0.154698] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.40 BogoMIPS (lpj=12372800) [ 0.154731] LVT offset 1 assigned for vector 0xf9 [ 0.154737] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.154739] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.154744] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.154747] Spectre V2 : Mitigation: Retpolines [ 0.154748] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.154750] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.154751] RETBleed: Mitigation: untrained return thunk [ 0.154753] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.154756] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.154761] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.154762] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.154764] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.154766] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.154768] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.186770] Freeing SMP alternatives memory: 40K [ 0.186777] pid_max: default: 32768 minimum: 301 [ 0.187615] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 0.187984] landlock: Up and running. [ 0.187986] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.188111] AppArmor: AppArmor initialized [ 0.188149] TOMOYO Linux initialized [ 0.188473] LSM support for eBPF active [ 0.188890] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.188971] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.298927] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.299359] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.299387] ... version: 0 [ 0.299388] ... bit width: 48 [ 0.299389] ... generic registers: 6 [ 0.299390] ... value mask: 0000ffffffffffff [ 0.299392] ... max period: 00007fffffffffff [ 0.299393] ... fixed-purpose events: 0 [ 0.299394] ... event mask: 000000000000003f [ 0.299514] signal: max sigframe size: 1776 [ 0.299566] rcu: Hierarchical SRCU implementation. [ 0.299568] rcu: Max phase no-delay instances is 1000. [ 0.299647] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.305089] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.305230] smp: Bringing up secondary CPUs ... [ 0.305430] smpboot: x86: Booting SMP configuration: [ 0.305432] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.334755] smp: Brought up 1 node, 8 CPUs [ 0.334755] smpboot: Total of 8 processors activated (49491.20 BogoMIPS) [ 0.395519] node 0 deferred pages initialised in 56ms [ 0.395519] Memory: 24350432K/25119540K available (16384K kernel code, 2486K rwdata, 11668K rodata, 4232K init, 4976K bss, 761168K reserved, 0K cma-reserved) [ 0.396139] devtmpfs: initialized [ 0.396139] x86/mm: Memory block size: 128MB [ 0.401546] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.401546] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.401546] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.401546] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.401546] pinctrl core: initialized pinctrl subsystem [ 0.403675] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.404520] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.405237] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.405983] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.406025] thermal_sys: Registered thermal governor 'fair_share' [ 0.406025] thermal_sys: Registered thermal governor 'bang_bang' [ 0.406025] thermal_sys: Registered thermal governor 'step_wise' [ 0.406025] thermal_sys: Registered thermal governor 'user_space' [ 0.406025] thermal_sys: Registered thermal governor 'power_allocator' [ 0.406025] cpuidle: using governor ladder [ 0.406025] cpuidle: using governor menu [ 0.406025] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.406895] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.406901] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved) [ 0.406903] PCI: Using configuration type 1 for base access [ 0.406905] PCI: Using configuration type 1 for extended access [ 0.406968] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.406970] mtrr: probably your BIOS does not setup all CPUs. [ 0.406971] mtrr: corrected configuration. [ 0.407082] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.408761] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.408761] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.408761] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.408761] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.411950] ACPI: Added _OSI(Module Device) [ 0.411950] ACPI: Added _OSI(Processor Device) [ 0.411950] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.411950] ACPI: Added _OSI(Processor Aggregator Device) [ 0.415655] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.434946] ACPI: Interpreter enabled [ 0.434965] ACPI: PM: (supports S0 S3 S4 S5) [ 0.434967] ACPI: Using IOAPIC for interrupt routing [ 0.435111] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.435151] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.435166] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.435167] PCI: Using E820 reservations for host bridge windows [ 0.435312] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.442294] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.442301] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.442670] PCI host bridge to bus 0000:00 [ 0.442674] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.442677] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.442679] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.442681] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.442683] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.442686] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.442688] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.442711] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 conventional PCI endpoint [ 0.442852] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 PCIe Root Port [ 0.442865] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.442869] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.442872] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.442877] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.442884] pci 0000:00:02.0: enabling Extended Tags [ 0.442908] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.443003] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 PCIe Root Port [ 0.443015] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.443019] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.443022] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.443031] pci 0000:00:04.0: enabling Extended Tags [ 0.443057] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.443150] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 PCIe Root Port [ 0.443163] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.443167] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.443176] pci 0000:00:05.0: enabling Extended Tags [ 0.443200] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.443293] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 PCIe Root Port [ 0.443306] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.443310] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.443319] pci 0000:00:06.0: enabling Extended Tags [ 0.443343] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.443434] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.443447] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.443451] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.443453] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.443462] pci 0000:00:09.0: enabling Extended Tags [ 0.443486] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.443583] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.443596] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.443600] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.443629] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.443635] pci 0000:00:0a.0: enabling Extended Tags [ 0.443659] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.443758] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.443772] pci 0000:00:11.0: BAR 0 [io 0xf090-0xf097] [ 0.443780] pci 0000:00:11.0: BAR 1 [io 0xf080-0xf083] [ 0.443787] pci 0000:00:11.0: BAR 2 [io 0xf070-0xf077] [ 0.443795] pci 0000:00:11.0: BAR 3 [io 0xf060-0xf063] [ 0.443802] pci 0000:00:11.0: BAR 4 [io 0xf050-0xf05f] [ 0.443810] pci 0000:00:11.0: BAR 5 [mem 0xfeb0b000-0xfeb0b3ff] [ 0.443914] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.443928] pci 0000:00:12.0: BAR 0 [mem 0xfeb0a000-0xfeb0afff] [ 0.444059] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.444073] pci 0000:00:12.2: BAR 0 [mem 0xfeb09000-0xfeb090ff] [ 0.444134] pci 0000:00:12.2: supports D1 D2 [ 0.444136] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.444225] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.444239] pci 0000:00:13.0: BAR 0 [mem 0xfeb08000-0xfeb08fff] [ 0.444360] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.444374] pci 0000:00:13.2: BAR 0 [mem 0xfeb07000-0xfeb070ff] [ 0.444435] pci 0000:00:13.2: supports D1 D2 [ 0.444436] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.444527] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.444657] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.444670] pci 0000:00:14.1: BAR 0 [io 0xf040-0xf047] [ 0.444678] pci 0000:00:14.1: BAR 1 [io 0xf030-0xf033] [ 0.444686] pci 0000:00:14.1: BAR 2 [io 0xf020-0xf027] [ 0.444693] pci 0000:00:14.1: BAR 3 [io 0xf010-0xf013] [ 0.444701] pci 0000:00:14.1: BAR 4 [io 0xf000-0xf00f] [ 0.444716] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.444719] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.444720] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.444722] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.444806] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint [ 0.444823] pci 0000:00:14.2: BAR 0 [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.444895] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.444975] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.445120] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.445144] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.445150] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.445253] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.445266] pci 0000:00:14.5: BAR 0 [mem 0xfeb06000-0xfeb06fff] [ 0.445384] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.445398] pci 0000:00:16.0: BAR 0 [mem 0xfeb05000-0xfeb05fff] [ 0.445522] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.445536] pci 0000:00:16.2: BAR 0 [mem 0xfeb04000-0xfeb040ff] [ 0.445597] pci 0000:00:16.2: supports D1 D2 [ 0.445599] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.445681] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.445740] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.445792] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.445844] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.445903] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.445962] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.446078] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.446093] pci 0000:01:00.0: BAR 0 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.446103] pci 0000:01:00.0: BAR 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.446109] pci 0000:01:00.0: BAR 4 [io 0xe000-0xe0ff] [ 0.446116] pci 0000:01:00.0: BAR 5 [mem 0xfea00000-0xfea3ffff] [ 0.446123] pci 0000:01:00.0: ROM [mem 0xfea40000-0xfea5ffff pref] [ 0.446129] pci 0000:01:00.0: enabling Extended Tags [ 0.446153] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.446201] pci 0000:01:00.0: supports D1 D2 [ 0.446203] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.446262] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.446348] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 PCIe Legacy Endpoint [ 0.446362] pci 0000:01:00.1: BAR 0 [mem 0xfea60000-0xfea63fff 64bit] [ 0.446392] pci 0000:01:00.1: enabling Extended Tags [ 0.446436] pci 0000:01:00.1: supports D1 D2 [ 0.446525] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.446571] pci 0000:02:00.0: [1b4b:9120] type 00 class 0x010601 PCIe Legacy Endpoint [ 0.446583] pci 0000:02:00.0: BAR 0 [io 0xd090-0xd097] [ 0.446590] pci 0000:02:00.0: BAR 1 [io 0xd080-0xd083] [ 0.446596] pci 0000:02:00.0: BAR 2 [io 0xd070-0xd077] [ 0.446602] pci 0000:02:00.0: BAR 3 [io 0xd060-0xd063] [ 0.446609] pci 0000:02:00.0: BAR 4 [io 0xd050-0xd05f] [ 0.446615] pci 0000:02:00.0: BAR 5 [mem 0xfe915000-0xfe9157ff] [ 0.446622] pci 0000:02:00.0: ROM [mem 0xfe900000-0xfe90ffff pref] [ 0.446634] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.446659] pci 0000:02:00.0: PME# supported from D3hot [ 0.446740] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.446789] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.446807] pci 0000:03:00.0: BAR 0 [mem 0xfe800000-0xfe807fff 64bit] [ 0.446844] pci 0000:03:00.0: enabling Extended Tags [ 0.446889] pci 0000:03:00.0: supports D1 D2 [ 0.446891] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.446988] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.447041] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.447059] pci 0000:04:00.0: BAR 0 [mem 0xfe700000-0xfe707fff 64bit] [ 0.447097] pci 0000:04:00.0: enabling Extended Tags [ 0.447142] pci 0000:04:00.0: supports D1 D2 [ 0.447144] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.447241] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.447303] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 PCIe Endpoint [ 0.447323] pci 0000:05:00.0: BAR 0 [mem 0xfe610000-0xfe6107ff 64bit] [ 0.447332] pci 0000:05:00.0: BAR 2 [io 0xc000-0xc0ff] [ 0.447410] pci 0000:05:00.0: supports D2 [ 0.447411] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.447517] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 PCIe Legacy Endpoint [ 0.447533] pci 0000:05:00.1: BAR 0 [io 0xc140-0xc147] [ 0.447542] pci 0000:05:00.1: BAR 1 [io 0xc130-0xc133] [ 0.447550] pci 0000:05:00.1: BAR 2 [io 0xc120-0xc127] [ 0.447559] pci 0000:05:00.1: BAR 3 [io 0xc110-0xc113] [ 0.447567] pci 0000:05:00.1: BAR 4 [io 0xc100-0xc10f] [ 0.447582] pci 0000:05:00.1: ROM [mem 0xfe600000-0xfe60ffff pref] [ 0.447634] pci 0000:05:00.1: supports D2 [ 0.447635] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.454722] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.454783] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 PCIe Endpoint [ 0.454805] pci 0000:06:00.0: BAR 0 [mem 0xd0310000-0xd031ffff 64bit pref] [ 0.454820] pci 0000:06:00.0: BAR 2 [mem 0xd0300000-0xd030ffff 64bit pref] [ 0.454844] pci 0000:06:00.0: ROM [mem 0xfe500000-0xfe5007ff pref] [ 0.454926] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.455073] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.455088] pci_bus 0000:07: extended config space not accessible [ 0.455128] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 conventional PCI endpoint [ 0.455146] pci 0000:07:06.0: BAR 0 [mem 0xfe400000-0xfe4007ff] [ 0.455228] pci 0000:07:06.0: supports D1 D2 [ 0.455301] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.455309] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.455311] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.455313] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.455315] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.455317] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.455320] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.455989] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.456052] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.456114] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.456175] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.456225] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.456264] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.456304] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.456344] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.456548] iommu: Default domain type: Translated [ 0.456548] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.456548] pps_core: LinuxPPS API ver. 1 registered [ 0.456548] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.456548] PTP clock support registered [ 0.456548] EDAC MC: Ver: 3.0.0 [ 0.456548] NetLabel: Initializing [ 0.456548] NetLabel: domain hash size = 128 [ 0.456548] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.456548] NetLabel: unlabeled traffic allowed by default [ 0.456548] PCI: Using ACPI for IRQ routing [ 0.463635] PCI: pci_cache_line_size set to 64 bytes [ 0.463697] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff] [ 0.463700] e820: reserve RAM buffer [mem 0xbdf05000-0xbfffffff] [ 0.463702] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] [ 0.463704] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] [ 0.463705] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.463707] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] [ 0.463734] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.463734] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.463734] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.463734] vgaarb: loaded [ 0.463734] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.463734] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.464862] clocksource: Switched to clocksource tsc-early [ 0.464869] VFS: Disk quotas dquot_6.6.0 [ 0.464869] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.464869] AppArmor: AppArmor Filesystem Enabled [ 0.464869] pnp: PnP ACPI init [ 0.464869] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.464869] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.464869] system 00:03: [io 0x040b] has been reserved [ 0.464869] system 00:03: [io 0x04d6] has been reserved [ 0.464869] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.464869] system 00:03: [io 0x0c14] has been reserved [ 0.464869] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.464869] system 00:03: [io 0x0c52] has been reserved [ 0.464869] system 00:03: [io 0x0c6c] has been reserved [ 0.464869] system 00:03: [io 0x0c6f] has been reserved [ 0.464869] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.464869] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.464869] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.464869] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.464869] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.464869] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.464869] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.464869] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.464869] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.464869] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.464869] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.464869] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.464869] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.464869] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.464869] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.464869] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.464869] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.464869] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.464869] pnp 00:05: [dma 2] [ 0.465017] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.465268] pnp 00:09: [dma 0 disabled] [ 0.465408] pnp: PnP ACPI: found 10 devices [ 0.472643] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.472947] NET: Registered PF_INET protocol family [ 0.473316] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.491652] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.491716] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.492080] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.492727] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.493019] TCP: Hash tables configured (established 262144 bind 65536) [ 0.493328] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.493512] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.493653] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.493796] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.493812] NET: Registered PF_XDP protocol family [ 0.493836] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.493840] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.493845] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.493848] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.493852] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.493854] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.493858] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.493862] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.493865] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.493869] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.493872] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.493876] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.493878] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.493881] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.493885] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.493888] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.493891] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.493895] pci 0000:00:14.4: PCI bridge to [bus 07] [ 0.493899] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.493907] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.493910] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.493912] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.493914] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.493916] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.493919] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] [ 0.493921] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.493923] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.493925] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.493927] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.493929] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.493932] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.493934] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.493936] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.493938] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.493940] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] [ 0.493942] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.493944] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] [ 0.493946] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 0.493948] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 0.493950] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 0.493952] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 0.493954] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.493956] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] [ 0.515552] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7e0 took 21031 usecs [ 0.531557] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7e0 took 15443 usecs [ 0.547554] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7e0 took 15426 usecs [ 0.563551] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7e0 took 15611 usecs [ 0.563782] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.564135] PCI: CLS 64 bytes, default 64 [ 0.564228] Trying to unpack rootfs image as initramfs... [ 0.564703] PCI-DMA: Disabling AGP. [ 0.564781] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.564784] PCI-DMA: using GART IOMMU. [ 0.564786] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.565658] software IO TLB: tearing down default memory pool [ 0.568459] LVT offset 0 assigned for vector 0x400 [ 0.572064] perf: AMD IBS detected (0x000000ff) [ 0.572543] amd_uncore: 4 amd_nb counters detected [ 0.573383] Initialise system trusted keyrings [ 0.573402] Key type blacklist registered [ 0.573475] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.573485] zbud: loaded [ 0.573908] fuse: init (API version 7.41) [ 0.574268] integrity: Platform Keyring initialized [ 0.574274] integrity: Machine keyring initialized [ 0.599609] Key type asymmetric registered [ 0.599612] Asymmetric key parser 'x509' registered [ 1.571885] tsc: Refined TSC clocksource calibration: 3093.299 MHz [ 1.571902] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c968d7d302, max_idle_ns: 440795233387 ns [ 1.572129] clocksource: Switched to clocksource tsc [ 1.714257] Freeing initrd memory: 138836K [ 1.720912] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.720992] io scheduler mq-deadline registered [ 1.723221] ledtrig-cpu: registered to indicate activity on CPUs [ 1.724197] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.725264] Could not retrieve perf counters (-19) [ 1.725630] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.725806] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.726745] Linux agpgart interface v0.103 [ 1.727679] i8042: PNP: No PS/2 controller found. [ 1.727765] mousedev: PS/2 mouse device common for all mice [ 1.727798] rtc_cmos 00:06: RTC can wake from S4 [ 1.728024] rtc_cmos 00:06: registered as rtc0 [ 1.728048] rtc_cmos 00:06: setting system clock to 2025-08-05T09:29:13 UTC (1754386153) [ 1.728082] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.728093] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.728654] NET: Registered PF_INET6 protocol family [ 1.734619] Segment Routing with IPv6 [ 1.734646] In-situ OAM (IOAM) with IPv6 [ 1.734669] mip6: Mobile IPv6 [ 1.734673] NET: Registered PF_PACKET protocol family [ 1.734740] mpls_gso: MPLS GSO support [ 1.734754] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.735182] microcode: Current revision: 0x0600063e [ 1.735184] microcode: Updated early from: 0x06000626 [ 1.735337] IPI shorthand broadcast: enabled [ 1.737914] sched_clock: Marking stable (1732005830, 3851372)->(1755339612, -19482410) [ 1.738210] registered taskstats version 1 [ 1.738388] Loading compiled-in X.509 certificates [ 1.765978] Loaded X.509 cert 'Build time autogenerated kernel key: ad9a63214fc4496e07a0afa6d5aaf974a4eb7e9c' [ 1.768631] Demotion targets for Node 0: null [ 1.768931] Key type .fscrypt registered [ 1.768933] Key type fscrypt-provisioning registered [ 1.778652] cryptd: max_cpu_qlen set to 1000 [ 1.786815] AES CTR mode by8 optimization enabled [ 1.812555] Key type encrypted registered [ 1.812562] AppArmor: AppArmor sha256 policy hashing enabled [ 1.812573] ima: No TPM chip found, activating TPM-bypass! [ 1.812576] ima: Allocated hash algorithm: sha256 [ 1.812590] ima: No architecture policies found [ 1.812614] evm: Initialising EVM extended attributes: [ 1.812616] evm: security.selinux [ 1.812617] evm: security.SMACK64 (disabled) [ 1.812618] evm: security.SMACK64EXEC (disabled) [ 1.812619] evm: security.SMACK64TRANSMUTE (disabled) [ 1.812621] evm: security.SMACK64MMAP (disabled) [ 1.812622] evm: security.apparmor [ 1.812623] evm: security.ima [ 1.812623] evm: security.capability [ 1.812624] evm: HMAC attrs: 0x1 [ 1.825068] RAS: Correctable Errors collector initialized. [ 1.840548] clk: Disabling unused clocks [ 1.840553] PM: genpd: Disabling unused power domains [ 1.860220] Freeing unused decrypted memory: 2028K [ 1.861255] Freeing unused kernel image (initmem) memory: 4232K [ 1.861287] Write protecting the kernel read-only data: 28672k [ 1.861728] Freeing unused kernel image (rodata/data gap) memory: 620K [ 1.928736] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.928742] Run /init as init process [ 1.928743] with arguments: [ 1.928745] /init [ 1.928746] splash [ 1.928748] with environment: [ 1.928749] HOME=/ [ 1.928750] TERM=linux [ 1.928751] BOOT_IMAGE=/boot/vmlinuz-6.12.33+deb12-amd64 [ 2.196421] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.196496] ACPI: button: Power Button [PWRB] [ 2.196571] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.203437] Floppy drive(s): fd0 is 1.44M [ 2.216872] ACPI: button: Power Button [PWRF] [ 2.222237] FDC 0 is a post-1991 82077 [ 2.240671] ACPI: bus type USB registered [ 2.240740] usbcore: registered new interface driver usbfs [ 2.240757] usbcore: registered new interface driver hub [ 2.240786] usbcore: registered new device driver usb [ 2.249018] SCSI subsystem initialized [ 2.285052] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.285063] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 2.285414] ACPI: bus type drm_connector registered [ 2.285725] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 2.286291] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 2.286860] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 2.287424] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 2.287515] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.300377] QUIRK: Enable AMD PLL fix [ 2.300404] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.300411] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 2.300417] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.300425] ehci-pci 0000:00:13.2: debug port 1 [ 2.300459] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.308869] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address XXX [ 2.308875] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.308878] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.308881] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 2.315884] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.315955] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.315959] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.315961] usb usb1: Product: EHCI Host Controller [ 2.315963] usb usb1: Manufacturer: Linux 6.12.33+deb12-amd64 ehci_hcd [ 2.315965] usb usb1: SerialNumber: ... [ 2.316141] hub 1-0:1.0: USB hub found [ 2.316154] hub 1-0:1.0: 5 ports detected [ 2.316474] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.316482] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 2 [ 2.316488] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.316497] ehci-pci 0000:00:16.2: debug port 1 [ 2.316529] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.320664] libata version 3.00 loaded. [ 2.331905] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.331983] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.331987] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.331989] usb usb2: Product: EHCI Host Controller [ 2.331991] usb usb2: Manufacturer: Linux 6.12.33+deb12-amd64 ehci_hcd [ 2.331993] usb usb2: SerialNumber: ... [ 2.332150] hub 2-0:1.0: USB hub found [ 2.332163] hub 2-0:1.0: 4 ports detected [ 2.332400] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.332417] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 2.332422] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.332431] ehci-pci 0000:00:12.2: debug port 1 [ 2.332469] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.347881] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.347943] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.347946] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.347949] usb usb3: Product: EHCI Host Controller [ 2.347951] usb usb3: Manufacturer: Linux 6.12.33+deb12-amd64 ehci_hcd [ 2.347953] usb usb3: SerialNumber: ... [ 2.348134] hub 3-0:1.0: USB hub found [ 2.348148] hub 3-0:1.0: 5 ports detected [ 2.348381] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.348389] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 2.348450] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 2.352827] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.352835] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.352841] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.352926] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.352930] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.352934] usb usb4: Product: xHCI Host Controller [ 2.352937] usb usb4: Manufacturer: Linux 6.12.33+deb12-amd64 xhci-hcd [ 2.352939] usb usb4: SerialNumber: ... [ 2.354591] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.354637] pata_via 0000:05:00.1: version 0.3.4 [ 2.357051] scsi host0: pata_via [ 2.357388] hub 4-0:1.0: USB hub found [ 2.357427] scsi host2: pata_via [ 2.357517] ata1: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 34 lpm-pol 0 [ 2.357520] ata2: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 34 lpm-pol 0 [ 2.357540] hub 4-0:1.0: 2 ports detected [ 2.357764] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.357812] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.357816] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.357818] usb usb5: Product: xHCI Host Controller [ 2.357821] usb usb5: Manufacturer: Linux 6.12.33+deb12-amd64 xhci-hcd [ 2.357823] usb usb5: SerialNumber: ... [ 2.357958] scsi host1: pata_atiixp [ 2.358016] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.358054] hub 5-0:1.0: USB hub found [ 2.358070] hub 5-0:1.0: 2 ports detected [ 2.358476] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.358521] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.358646] scsi host3: pata_atiixp [ 2.358722] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 lpm-pol 0 [ 2.358725] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 lpm-pol 0 [ 2.358875] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.358883] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.358966] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 2.359215] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.359222] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 2.359228] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.359322] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.359327] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.359330] usb usb7: Product: xHCI Host Controller [ 2.359333] usb usb7: Manufacturer: Linux 6.12.33+deb12-amd64 xhci-hcd [ 2.359335] usb usb7: SerialNumber: ... [ 2.359418] ahci 0000:00:11.0: version 3.0 [ 2.359686] ahci 0000:00:11.0: AHCI vers 0001.0200, 32 command slots, 6 Gbps, SATA mode [ 2.359692] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 2.359695] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part [ 2.360021] hub 7-0:1.0: USB hub found [ 2.360041] hub 7-0:1.0: 2 ports detected [ 2.360286] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.360328] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.360331] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.360334] usb usb8: Product: xHCI Host Controller [ 2.360336] usb usb8: Manufacturer: Linux 6.12.33+deb12-amd64 xhci-hcd [ 2.360338] usb usb8: SerialNumber: ... [ 2.360550] hub 8-0:1.0: USB hub found [ 2.361155] hub 8-0:1.0: 2 ports detected [ 2.361403] scsi host4: ahci [ 2.361647] scsi host5: ahci [ 2.361825] scsi host6: ahci [ 2.361997] scsi host7: ahci [ 2.362066] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 lpm-pol 3 [ 2.362070] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 lpm-pol 3 [ 2.362072] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 lpm-pol 3 [ 2.362074] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 lpm-pol 3 [ 2.362290] ahci 0000:02:00.0: AHCI vers 0001.0000, 32 command slots, 6 Gbps, SATA mode [ 2.362294] ahci 0000:02:00.0: 2/2 ports implemented (port mask 0x3) [ 2.362297] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.362785] scsi host8: ahci [ 2.362997] scsi host9: ahci [ 2.363089] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 lpm-pol 0 [ 2.363093] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 lpm-pol 0 [ 2.367918] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.416032] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.416037] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.416040] usb usb6: Product: OHCI PCI host controller [ 2.416042] usb usb6: Manufacturer: Linux 6.12.33+deb12-amd64 ohci_hcd [ 2.416044] usb usb6: SerialNumber: ... [ 2.416211] hub 6-0:1.0: USB hub found [ 2.416226] hub 6-0:1.0: 5 ports detected [ 2.416629] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.416636] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.416658] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.476078] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.476083] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.476085] usb usb9: Product: OHCI PCI host controller [ 2.476087] usb usb9: Manufacturer: Linux 6.12.33+deb12-amd64 ohci_hcd [ 2.476088] usb usb9: SerialNumber: ... [ 2.476379] hub 9-0:1.0: USB hub found [ 2.476393] hub 9-0:1.0: 5 ports detected [ 2.476783] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.476790] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.476810] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.524282] ata3.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.524288] ata3.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.524293] ata3.00: limited to UDMA/33 due to 40-wire cable [ 2.536014] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.536021] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.536025] usb usb10: Product: OHCI PCI host controller [ 2.536027] usb usb10: Manufacturer: Linux 6.12.33+deb12-amd64 ohci_hcd [ 2.536029] usb usb10: SerialNumber: ... [ 2.536186] hub 10-0:1.0: USB hub found [ 2.536200] hub 10-0:1.0: 2 ports detected [ 2.536533] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.536539] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.536568] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.568014] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.583885] usb 2-2: new high-speed USB device number 2 using ehci-pci [ 2.600009] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.600015] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.600017] usb usb11: Product: OHCI PCI host controller [ 2.600019] usb usb11: Manufacturer: Linux 6.12.33+deb12-amd64 ohci_hcd [ 2.600021] usb usb11: SerialNumber: ... [ 2.600189] hub 11-0:1.0: USB hub found [ 2.600204] hub 11-0:1.0: 4 ports detected [ 2.671847] ata8: SATA link down (SStatus 0 SControl 300) [ 2.680195] scsi 1:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.712313] usb 1-1: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 2.712319] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.713320] hub 1-1:1.0: USB hub found [ 2.713818] hub 1-1:1.0: 2 ports detected [ 2.728882] usb 2-2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 2.728887] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.728890] usb 2-2: Product: 802.11n NIC [ 2.728892] usb 2-2: Manufacturer: Realtek [ 2.728893] usb 2-2: SerialNumber: ... [ 2.827995] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.828044] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.828721] ata5.00: ATA-8: ST2000DL001-9VT156, CC98, max UDMA/133 [ 2.828724] ata5.00: 3907029168 sectors, multi 0: LBA48 [ 2.829179] ata6.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.829443] ata5.00: configured for UDMA/133 [ 2.829469] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.829720] scsi 4:0:0:0: Direct-Access ATA ST2000DL001-9VT1 CC98 PQ: 0 ANSI: 5 [ 2.830871] ata6.00: configured for UDMA/133 [ 2.831100] scsi 5:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 2.831874] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 330) [ 2.833945] ata9.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 2.835976] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.836103] ata7.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 2.836134] ata7.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.836240] ata7.00: configured for UDMA/133 [ 2.836428] scsi 6:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 2.836683] ata9.00: configured for UDMA/133 [ 2.839969] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 330) [ 2.840241] scsi 8:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 2.841178] ata10.00: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.842952] ata10.00: configured for UDMA/133 [ 2.871977] usb 6-1: new full-speed USB device number 2 using ohci-pci [ 2.883187] scsi 9:0:0:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 2.888182] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.958000] sd 1:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.958015] sd 1:0:0:0: [sda] Write Protect is off [ 2.958018] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.958037] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.958075] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.958142] sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.958146] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 2.958162] sd 4:0:0:0: [sdb] Write Protect is off [ 2.958166] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.958190] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.958215] sd 6:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.958235] sd 6:0:0:0: [sdc] Write Protect is off [ 2.958236] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.958239] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.958243] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.958247] sd 5:0:0:0: [sdd] 4096-byte physical blocks [ 2.958262] sd 5:0:0:0: [sdd] Write Protect is off [ 2.958265] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.958265] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.958290] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.958311] sd 6:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 2.958335] sd 5:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 2.984473] sda: sda1 sda2 sda3 sda4 [ 2.984707] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.994991] sdc: sdc1 sdc2 [ 2.995247] sd 6:0:0:0: [sdc] Attached SCSI disk [ 3.001402] sdd: sdd1 sdd2 [ 3.001559] sd 5:0:0:0: [sdd] Attached SCSI disk [ 3.019960] sdb: sdb1 [ 3.020136] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.055017] usb 6-1: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 3.055024] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.055027] usb 6-1: Product: USB Device [ 3.055029] usb 6-1: Manufacturer: COMPANY [ 3.075485] hid: raw HID events driver (C) Jiri Kosina [ 3.092214] usbcore: registered new interface driver usbhid [ 3.092218] usbhid: USB HID core driver [ 3.093904] sr 8:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.093909] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.095207] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:09DA:FAA8.0001/input/input2 [ 3.099881] usb 9-2: new full-speed USB device number 2 using ohci-pci [ 3.289035] usb 9-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.289041] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.289043] usb 9-2: Product: A4Tech Gaming Mouse [ 3.289045] usb 9-2: Manufacturer: PixArt [ 3.295295] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.0/0003:09DA:3519.0004/input/input3 [ 3.479969] usb 3-2: new high-speed USB device number 3 using ehci-pci [ 3.598154] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 3.643043] sr 9:0:0:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.648113] hid-generic 0003:09DA:FAA8.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input0 [ 3.648209] hid-generic 0003:09DA:3519.0004: input,hidraw1: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:13.0-2/input0 [ 3.648339] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.1/0003:09DA:FAA8.0002/input/input4 [ 3.648459] hid-generic 0003:09DA:FAA8.0002: input,hidraw2: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-1/input1 [ 3.648818] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input5 [ 3.651551] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.1/0003:09DA:3519.0005/input/input8 [ 3.680660] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 3.704059] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input6 [ 3.760188] hid-generic 0003:09DA:3519.0005: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:13.0-2/input1 [ 3.760288] hid-generic 0003:09DA:FAA8.0003: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input2 [ 3.844656] usb 3-2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 3.844663] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.844665] usb 3-2: SerialNumber: ... [ 4.035977] usb 9-3: new low-speed USB device number 3 using ohci-pci [ 5.594167] usb 9-3: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 5.594172] usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.594174] usb 9-3: Product: NOVA AVR [ 5.594176] usb 9-3: Manufacturer: MGE UPS SYSTEMS [ 7.174120] [drm] amdgpu kernel modesetting enabled. [ 7.174381] amdgpu: Virtual CRAT table created for CPU [ 7.174404] amdgpu: Topology: Add CPU node [ 7.174736] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 7.174762] [drm] register mmio base: 0xFEA00000 [ 7.174764] [drm] register mmio size: 262144 [ 7.174847] [drm] add ip block number 0 <vi_common> [ 7.174849] [drm] add ip block number 1 <gmc_v8_0> [ 7.174851] [drm] add ip block number 2 <tonga_ih> [ 7.174852] [drm] add ip block number 3 <gfx_v8_0> [ 7.174854] [drm] add ip block number 4 <sdma_v3_0> [ 7.174855] [drm] add ip block number 5 <powerplay> [ 7.174856] [drm] add ip block number 6 <dm> [ 7.174858] [drm] add ip block number 7 <uvd_v6_0> [ 7.174859] [drm] add ip block number 8 <vce_v3_0> [ 7.175113] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 7.175117] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 7.175445] [drm] UVD is enabled in VM mode [ 7.175447] [drm] UVD ENC is enabled in VM mode [ 7.175449] [drm] VCE enabled in VM mode [ 7.175488] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 7.176578] Console: switching to colour dummy device 80x25 [ 7.176584] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 7.176587] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 7.176615] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 7.176961] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 7.176964] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 7.176971] [drm] Detected VRAM RAM=8192M, BAR=256M [ 7.176972] [drm] RAM width 256bits GDDR5 [ 7.177191] [drm] amdgpu: 8192M of VRAM memory ready [ 7.177194] [drm] amdgpu: 11997M of GTT memory ready. [ 7.177220] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 7.177605] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 7.178755] [drm] Chained IB support enabled! [ 7.184090] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 7.187263] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 7.189410] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 7.501597] [drm] Display Core v3.2.301 initialized on DCE 11.2 [ 7.563290] [drm] UVD and UVD ENC initialized successfully. [ 7.673223] [drm] VCE initialized successfully. [ 7.674233] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 7.674248] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 7.677998] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 7.678857] [drm] Initialized amdgpu 3.61.0 for 0000:01:00.0 on minor 0 [ 7.693107] fbcon: amdgpudrmfb (fb0) is primary device [ 7.769595] Console: switching to colour frame buffer device 160x64 [ 7.787684] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 8.129171] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:13.0-3/input0 [ 8.247932] raid6: sse2x4 gen() 12282 MB/s [ 8.315932] raid6: sse2x2 gen() 11405 MB/s [ 8.383929] raid6: sse2x1 gen() 7801 MB/s [ 8.383931] raid6: using algorithm sse2x4 gen() 12282 MB/s [ 8.451930] raid6: .... xor() 4515 MB/s, rmw enabled [ 8.451932] raid6: using ssse3x2 recovery algorithm [ 8.453900] xor: automatically using best checksumming function avx [ 8.455402] async_tx: api initialized (async) [ 9.407934] random: crng init done [ 9.710250] Btrfs loaded, zoned=yes, fsverity=yes [ 22.524752] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 22.524769] floppy: error 10 while reading block 0 [ 22.849957] EXT4-fs (sda3): mounted filesystem HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro with ordered data mode. Quota mode: none. [ 22.974311] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 23.161288] systemd[1]: Inserted module 'autofs4' [ 23.190134] systemd[1]: systemd 254.26-1~bpo12+1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 23.190143] systemd[1]: Detected architecture x86-64. [ 23.193683] systemd[1]: Hostname set to ... [ 23.554994] systemd[1]: Configuration file /etc/systemd/system/vrs.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 23.727810] systemd[1]: Queued start job for default target graphical.target. [ 23.757478] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 23.758023] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 23.758471] systemd[1]: Created slice system-nut\x2ddriver.slice - Slice /system/nut-driver. [ 23.758915] systemd[1]: Created slice system-tor.slice - Slice /system/tor. [ 23.759217] systemd[1]: Created slice user.slice - User and Session Slice. [ 23.759312] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 23.759564] systemd[1]: Set up automount ... [ 23.759622] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 23.759686] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 23.759709] systemd[1]: Reached target slices.target - Slice Units. [ 23.759744] systemd[1]: Reached target stunnel.target - TLS tunnels for network services - per-config-file target. [ 23.759775] systemd[1]: Reached target swap.target - Swaps. [ 23.759807] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 23.759946] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. [ 23.760128] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. [ 23.760267] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 23.760359] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 23.760513] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 23.760666] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 23.761147] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 23.761259] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 23.762258] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 23.763345] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 23.764725] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 23.765989] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 23.766441] systemd[1]: Finished blk-availability.service - Availability of block devices. [ 23.768531] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 23.769866] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 23.771275] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 23.772693] systemd[1]: Starting XXX@XXX - Load Kernel Module configfs... [ 23.774198] systemd[1]: Starting XXX@XXX - Load Kernel Module dm_mod... [ 23.775661] systemd[1]: Starting XXX@XXX - Load Kernel Module drm... [ 23.777162] systemd[1]: Starting XXX@XXX - Load Kernel Module efi_pstore... [ 23.778598] systemd[1]: Starting XXX@XXX - Load Kernel Module fuse... [ 23.780015] systemd[1]: Starting XXX@XXX - Load Kernel Module loop... [ 23.780389] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 23.782506] systemd[1]: Starting systemd-journald.service - Journal Service... [ 23.786973] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 23.787038] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-HASH_466-8928-06B7-84F7-7C8411FA7941). [ 23.788443] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 23.789971] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 23.792757] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 23.793082] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 23.793360] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 23.793634] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 23.794098] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 23.794601] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 23.795141] systemd[1]: XXX@XXX: Deactivated successfully. [ 23.795391] systemd[1]: Finished XXX@XXX - Load Kernel Module configfs. [ 23.795944] systemd[1]: XXX@XXX: Deactivated successfully. [ 23.796224] systemd[1]: Finished XXX@XXX - Load Kernel Module drm. [ 23.796782] systemd[1]: XXX@XXX: Deactivated successfully. [ 23.797039] systemd[1]: Finished XXX@XXX - Load Kernel Module efi_pstore. [ 23.797521] systemd[1]: XXX@XXX: Deactivated successfully. [ 23.797769] systemd[1]: Finished XXX@XXX - Load Kernel Module fuse. [ 23.798333] loop: module loaded [ 23.799577] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 23.800916] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 23.802478] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 23.804644] systemd[1]: XXX@XXX: Deactivated successfully. [ 23.804851] systemd[1]: Finished XXX@XXX - Load Kernel Module loop. [ 23.805125] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 23.806135] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 23.817694] systemd-journald[518]: Collecting audit messages is disabled. [ 23.821291] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 23.821330] device-mapper: uevent: version 1.0.3 [ 23.821461] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 23.822522] systemd[1]: XXX@XXX: Deactivated successfully. [ 23.822739] systemd[1]: Finished XXX@XXX - Load Kernel Module dm_mod. [ 23.822979] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 23.822988] EXT4-fs (sda3): re-mounted HASH_359-BBF9-D580-BC9E-CA1D262C8B09 r/w. [ 23.825160] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 23.829942] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 23.830022] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 23.831731] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 23.859019] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed. [ 23.866950] lp: driver loaded but no devices found [ 23.873731] ppdev: user-space parallel port driver [ 23.875859] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 23.876214] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. [ 23.908299] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 23.921463] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. [ 23.923469] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... [ 23.936180] systemd[1]: Started systemd-journald.service - Journal Service. [ 23.946827] systemd-journald[518]: Received client request to flush runtime journal. [ 23.971924] systemd-journald[518]: /var/log/journal/32b9dea4495441faaab1b86b16a25712/system.journal: Journal file uses a different sequence number ID, rotating. [ 23.971932] systemd-journald[518]: Rotating system journal. [ 24.100351] Asymmetric key parser 'pkcs8' registered [ 24.410261] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 24.410326] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 24.410383] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 24.410436] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 24.410495] sr 8:0:0:0: Attached scsi generic sg4 type 5 [ 24.410547] sr 9:0:0:0: Attached scsi generic sg5 type 5 [ 24.563020] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 24.564898] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 24.570513] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 24.582436] mc: Linux media interface: v0.10 [ 24.589146] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 24.593270] at24 0-0050: supply vcc not found, using dummy regulator [ 24.595232] at24 0-0050: 256 byte spd EEPROM, read-only [ 24.596248] acpi_cpufreq: overriding BIOS provided _PSD data [ 24.597283] at24 0-0051: supply vcc not found, using dummy regulator [ 24.599946] at24 0-0051: 256 byte spd EEPROM, read-only [ 24.601293] at24 0-0052: supply vcc not found, using dummy regulator [ 24.606602] at24 0-0052: 256 byte spd EEPROM, read-only [ 24.608580] at24 0-0053: supply vcc not found, using dummy regulator [ 24.620673] at24 0-0053: 256 byte spd EEPROM, read-only [ 24.769953] videodev: Linux video capture interface: v2.00 [ 25.013700] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 25.041820] kvm_amd: TSC scaling supported [ 25.041824] kvm_amd: Nested Virtualization enabled [ 25.041826] kvm_amd: Nested Paging enabled [ 25.041828] kvm_amd: LBR virtualization supported [ 25.125138] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 25.125308] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 25.125320] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] [ 25.125346] saa7134: saa7133[0]: board init: gpio is 40000 [ 25.125347] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 25.134886] MCE: In-kernel MCE decoding enabled. [ 25.139180] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11 [ 25.139285] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12 [ 25.140218] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13 [ 25.140303] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14 [ 25.140383] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15 [ 25.140465] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16 [ 25.159616] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 25.159990] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 25.160320] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 25.160650] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 25.160979] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 25.161117] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 25.161124] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 25.161127] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 25.161130] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 25.161132] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 25.161134] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 25.161137] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 25.161139] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 25.161141] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 25.188170] Registered IR keymap rc-avermedia-m135a [ 25.188743] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input17 [ 25.188823] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input18 [ 25.188916] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input19 [ 25.188992] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input20 [ 25.189087] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input21 [ 25.189207] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input22 [ 25.189281] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input23 [ 25.189375] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input24 [ 25.196667] IR NEC protocol handler initialized [ 25.223915] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 25.224095] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 25.224152] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 25.383875] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 25.383883] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 25.383887] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 25.383889] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.383893] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 25.383895] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.383896] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.383900] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.383902] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.383903] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.383906] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.383908] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.383910] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.383913] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.383914] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.383916] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.451904] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 25.547883] tda829x 13-004b: setting tuner address to 60 [ 25.570506] usb 2-2: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 25.570521] usb 2-2: RTL8188EU MAC: XXX [ 25.570528] usb 2-2: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 25.575207] usb 2-2: Firmware revision 28.0 (signature 0x88e1) [ 25.623966] tda829x 13-004b: type set to tda8290+75a [ 26.189478] usbcore: registered new interface driver rtl8xxxu [ 26.194725] rtl8xxxu 2-2:1.0 wlxd037459855f3: renamed from wlan0 [ 26.427970] usb 3-2: set resolution quirk: cval->res = 384 [ 26.429070] usbcore: registered new interface driver snd-usb-audio [ 26.429128] usb 3-2: Found UVC 1.00 device <unnamed> (046d:0825) [ 26.620910] usbcore: registered new interface driver uvcvideo [ 29.332659] saa7134: saa7133[0]: registered device video2 [v4l2] [ 29.332789] saa7134: saa7133[0]: registered device vbi0 [ 29.332901] saa7134: saa7133[0]: registered device radio0 [ 29.354834] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 29.354890] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 33.476456] NET: Registered PF_ALG protocol family [ 33.525086] alg: No test for hmac(md4) (hmac(md4-generic)) [ 33.568494] Process accounting resumed [ 33.752934] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 34.250531] rtl8xxxu 2-2:1.0 wlxd037459855f3: renamed from wlan0 (while UP) [ 34.904511] vboxdrv: loading out-of-tree module taints kernel. [ 34.904519] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 34.941887] vboxdrv: Found 8 processor cores/threads [ 34.964713] vboxdrv: TSC mode is Invariant, tentative frequency 3093350104 Hz [ 34.964721] vboxdrv: Successfully loaded version 7.1.12 r169651 (interface 0x00340001) [ 34.993032] NET: Registered PF_QIPCRTR protocol family [ 35.035904] usb 3-2: reset high-speed USB device number 3 using ehci-pci [ 35.179371] VBoxNetFlt: Successfully started. [ 35.187453] VBoxNetAdp: Successfully started. [ 35.469582] systemd-journald[518]: /var/log/journal/32b9dea4495441faaab1b86b16a25712/user-XXXX.journal: Journal file uses a different sequence number ID, rotating. [ 36.109325] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 36.114654] wlxd037459855f3: authenticate with XXX (local address=XXX) [ 36.114659] wlxd037459855f3: send auth to XXX (try 1/3) [ 36.116408] wlxd037459855f3: authenticated [ 36.119981] wlxd037459855f3: associate with XXX (try 1/3) [ 36.123116] wlxd037459855f3: RX AssocResp from XXX (capab=0x411 status=0 aid=2) [ 36.125017] usb 2-2: rtl8xxxu_bss_info_changed: HT supported [ 36.127270] wlxd037459855f3: associated [ 38.592478] tg3 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full duplex [ 38.592489] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 38.592493] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 49.284688] systemd-journald[518]: Time jumped backwards, rotating. [ 3805.101222] Non-volatile memory driver v1.3 [ 3810.349924] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 3817.489986] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 3817.490005] floppy: error 10 while reading block 0 [ 3831.298386] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 3831.298407] floppy: error 10 while reading block 0