[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.000000] Linux version 5.3.0-53-generic (XXX@XXX) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #47~18.04.1-Ubuntu SMP Thu May 7 13:10:50 UTC 2020 (Ubuntu 5.3.0-53.47~18.04.1-generic 5.3.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-53-generic root=UUID=HASH_8CF-5398-A024-DA5E-77E0463775F7 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000937ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000093800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e5000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7c8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7c90000-0x00000000b7c9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b7c9e000-0x00000000b7cdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b7ce0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed010ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed02000-0x00000000fed14bff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Acer Veriton S670G/EQ45M, BIOS P01-A3 05/05/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2666.609 MHz processor [ 0.003682] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.003684] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.003689] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.003694] MTRR default type: uncachable [ 0.003695] MTRR fixed ranges enabled: [ 0.003697] 00000-9FFFF write-back [ 0.003698] A0000-BFFFF uncachable [ 0.003698] C0000-D3FFF write-protect [ 0.003699] D4000-DFFFF uncachable [ 0.003700] E0000-EFFFF write-through [ 0.003701] F0000-FFFFF write-protect [ 0.003702] MTRR variable ranges enabled: [ 0.003703] 0 base 000000000 mask F00000000 write-back [ 0.003704] 1 base 100000000 mask FC0000000 write-back [ 0.003705] 2 base 0C0000000 mask FC0000000 uncachable [ 0.003707] 3 base 0B7E00000 mask FFFE00000 uncachable [ 0.003708] 4 base 0B8000000 mask FF8000000 uncachable [ 0.003708] 5 disabled [ 0.003709] 6 disabled [ 0.003710] 7 disabled [ 0.004345] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004453] total RAM covered: 3966M [ 0.004822] Found optimal setting for mtrr clean up [ 0.004824] gran_size: 64K chunk_size: 256M num_reg: 5 lose cover RAM: 0G [ 0.005412] e820: update [mem 0xb7e00000-0xffffffff] usable ==> reserved [ 0.005417] last_pfn = 0xb7c90 max_arch_pfn = 0x400000000 [ 0.016238] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.020612] check: Scanning 1 areas for low memory corruption [ 0.020619] BRK [0x10f401000, 0x10f401fff] PGTABLE [ 0.020621] BRK [0x10f402000, 0x10f402fff] PGTABLE [ 0.020622] BRK [0x10f403000, 0x10f403fff] PGTABLE [ 0.020661] BRK [0x10f404000, 0x10f404fff] PGTABLE [ 0.020663] BRK [0x10f405000, 0x10f405fff] PGTABLE [ 0.020753] BRK [0x10f406000, 0x10f406fff] PGTABLE [ 0.020773] BRK [0x10f407000, 0x10f407fff] PGTABLE [ 0.020811] BRK [0x10f408000, 0x10f408fff] PGTABLE [ 0.020910] RAMDISK: [mem 0x2fdcb000-0x33edcfff] [ 0.020919] ACPI: Early table checksum verification disabled [ 0.020924] ACPI: RSDP 0x00000000000FA5C0 000014 (v00 ACPIAM) [ 0.020927] ACPI: RSDT 0x00000000B7C90000 00004C (v01 ACRSYS ACRPRDCT 20100505 MSFT 00000097) [ 0.020933] ACPI: FACP 0x00000000B7C90200 000084 (v01 050510 FACP1723 20100505 MSFT 00000097) [ 0.020939] ACPI: DSDT 0x00000000B7C905C0 0073EC (v01 1AAAA 1AAAA000 00000000 INTL 20051117) [ 0.020943] ACPI: FACS 0x00000000B7C9E000 000040 [ 0.020946] ACPI: APIC 0x00000000B7C90390 00006C (v01 050510 APIC1723 20100505 MSFT 00000097) [ 0.020949] ACPI: MCFG 0x00000000B7C90400 00003C (v01 050510 OEMMCFG 20100505 MSFT 00000097) [ 0.020953] ACPI: SLIC 0x00000000B7C90440 000176 (v01 ACRSYS ACRPRDCT 20100505 MSFT 00000097) [ 0.020956] ACPI: OEMB 0x00000000B7C9E040 000072 (v01 050510 OEMB1723 20100505 MSFT 00000097) [ 0.020959] ACPI: HPET 0x00000000B7C985C0 000038 (v01 050510 OEMHPET 20100505 MSFT 00000097) [ 0.020963] ACPI: ASF! 0x00000000B7C98600 000099 (v32 LEGEND I865PASF 00000001 INTL 20051117) [ 0.020966] ACPI: GSCI 0x00000000B7C9E0C0 002024 (v01 050510 GMCHSCI 20100505 MSFT 00000097) [ 0.020970] ACPI: AWMI 0x00000000B7CA00F0 00004E (v01 050510 OEMB1723 20100505 MSFT 00000097) [ 0.020973] ACPI: SSDT 0x00000000B7CA10B0 000A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.020983] ACPI: Local APIC address 0xfee00000 [ 0.021065] No NUMA configuration found [ 0.021066] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.021077] NODE_DATA(0) allocated [mem 0x13ffd5000-0x13fffffff] [ 0.021343] Zone ranges: [ 0.021344] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.021346] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.021347] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.021348] Device empty [ 0.021349] Movable zone start for each node [ 0.021352] Early memory node ranges [ 0.021353] node 0: [mem 0x0000000000001000-0x0000000000092fff] [ 0.021354] node 0: [mem 0x0000000000100000-0x00000000b7c8ffff] [ 0.021355] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.021371] Zeroed struct page in unavailable ranges: 990 pages [ 0.021372] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.021373] On node 0 totalpages: 1014818 [ 0.021374] DMA zone: 64 pages used for memmap [ 0.021375] DMA zone: 21 pages reserved [ 0.021376] DMA zone: 3986 pages, LIFO batch:0 [ 0.021440] DMA32 zone: 11699 pages used for memmap [ 0.021441] DMA32 zone: 748688 pages, LIFO batch:63 [ 0.039548] Normal zone: 4096 pages used for memmap [ 0.039550] Normal zone: 262144 pages, LIFO batch:63 [ 0.045477] Reserving Intel graphics memory at [mem 0xb8000000-0xbfffffff] [ 0.045562] ACPI: PM-Timer IO Port: 0x808 [ 0.045564] ACPI: Local APIC address 0xfee00000 [ 0.045584] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.045587] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.045589] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.045591] ACPI: IRQ0 used by override. [ 0.045592] ACPI: IRQ9 used by override. [ 0.045594] Using ACPI (MADT) for SMP configuration information [ 0.045596] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.045603] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.045620] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.045622] PM: Registered nosave memory: [mem 0x00093000-0x00093fff] [ 0.045623] PM: Registered nosave memory: [mem 0x00094000-0x0009ffff] [ 0.045623] PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff] [ 0.045624] PM: Registered nosave memory: [mem 0x000e5000-0x000fffff] [ 0.045626] PM: Registered nosave memory: [mem 0xb7c90000-0xb7c9dfff] [ 0.045626] PM: Registered nosave memory: [mem 0xb7c9e000-0xb7cdffff] [ 0.045627] PM: Registered nosave memory: [mem 0xb7ce0000-0xbfffffff] [ 0.045628] PM: Registered nosave memory: [mem 0xc0000000-0xfecfffff] [ 0.045628] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.045629] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.045630] PM: Registered nosave memory: [mem 0xfed02000-0xfed13fff] [ 0.045631] PM: Registered nosave memory: [mem 0xfed14000-0xfed1ffff] [ 0.045631] PM: Registered nosave memory: [mem 0xfed20000-0xfed3ffff] [ 0.045632] PM: Registered nosave memory: [mem 0xfed40000-0xfedfffff] [ 0.045633] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.045633] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.045634] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.045636] [mem 0xc0000000-0xfecfffff] available for PCI devices [ 0.045637] Booting paravirtualized kernel on bare hardware [ 0.045641] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.045649] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.046343] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.046351] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.046353] pcpu-alloc: [0] 0 1 2 3 [ 0.046390] Built 1 zonelists, mobility grouping on. Total pages: 998938 [ 0.046391] Policy zone: Normal [ 0.046393] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-53-generic root=UUID=HASH_8CF-5398-A024-DA5E-77E0463775F7 ro quiet splash vt.handoff=1 [ 0.047533] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.048145] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.048212] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.065224] Calgary: detecting Calgary via BIOS EBDA area [ 0.065226] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.095453] Memory: 3822896K/4059272K available (14339K kernel code, 2369K rwdata, 4668K rodata, 2664K init, 5072K bss, 236376K reserved, 0K cma-reserved) [ 0.095462] random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0 [ 0.095638] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.095657] Kernel/User page tables isolation: enabled [ 0.095680] ftrace: allocating 43313 entries in 170 pages [ 0.115194] rcu: Hierarchical RCU implementation. [ 0.115196] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.115197] Tasks RCU enabled. [ 0.115198] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.115199] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.118917] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.119167] vt handoff: transparent VT on vt#1 [ 0.119176] Console: colour dummy device 80x25 [ 0.119181] printk: console [tty0] enabled [ 0.119204] ACPI: Core revision 20190703 [ 0.119308] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.119321] APIC: Switch to symmetric I/O mode setup [ 0.119680] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.139321] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x267007176d1, max_idle_ns: 440795219146 ns [ 0.139325] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.21 BogoMIPS (lpj=10666436) [ 0.139327] pid_max: default: 32768 minimum: 301 [ 0.139366] LSM: Security Framework initializing [ 0.139377] Yama: becoming mindful. [ 0.139420] AppArmor: AppArmor initialized [ 0.139473] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.139490] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.139674] *** VALIDATE proc *** [ 0.139741] *** VALIDATE cgroup1 *** [ 0.139742] *** VALIDATE cgroup2 *** [ 0.139798] mce: CPU0: Thermal monitoring enabled (TM2) [ 0.139801] process: using mwait in idle threads [ 0.139804] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.139805] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.139807] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.139809] Spectre V2 : Mitigation: Full generic retpoline [ 0.139810] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.139811] Speculative Store Bypass: Vulnerable [ 0.139814] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.139963] Freeing SMP alternatives memory: 40K [ 0.252952] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.253102] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.253109] ... version: 2 [ 0.253110] ... bit width: 40 [ 0.253110] ... generic registers: 2 [ 0.253111] ... value mask: 000000ffffffffff [ 0.253112] ... max period: 000000007fffffff [ 0.253112] ... fixed-purpose events: 3 [ 0.253113] ... event mask: 0000000700000003 [ 0.253167] rcu: Hierarchical SRCU implementation. [ 0.254332] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.254417] smp: Bringing up secondary CPUs ... [ 0.254579] x86: Booting SMP configuration: [ 0.254580] .... node #0, CPUs: #1 #2 #3 [ 0.275407] smp: Brought up 1 node, 4 CPUs [ 0.275407] smpboot: Max logical packages: 1 [ 0.275407] smpboot: Total of 4 processors activated (21332.87 BogoMIPS) [ 0.278012] devtmpfs: initialized [ 0.278012] x86/mm: Memory block size: 128MB [ 0.279500] PM: Registering ACPI NVS region [mem 0xb7c9e000-0xb7cdffff] (270336 bytes) [ 0.279500] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.279500] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.279500] pinctrl core: initialized pinctrl subsystem [ 0.279568] PM: RTC time: 20:44:54, date: 2020-05-22 [ 0.279730] NET: Registered protocol family 16 [ 0.279839] EISA bus registered [ 0.279839] cpuidle: using governor ladder [ 0.279839] cpuidle: using governor menu [ 0.279839] ACPI: bus type PCI registered [ 0.279839] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.279839] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.279839] PCI: not using MMCONFIG [ 0.279839] PCI: Using configuration type 1 for base access [ 0.281724] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.287481] ACPI: Added _OSI(Module Device) [ 0.287482] ACPI: Added _OSI(Processor Device) [ 0.287483] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.287484] ACPI: Added _OSI(Processor Aggregator Device) [ 0.287485] ACPI: Added _OSI(Linux-Dell-Video) [ 0.287486] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.287487] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.297453] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.298904] ACPI: Dynamic OEM Table Load: [ 0.298909] ACPI: SSDT 0xFFFF9157FABCE000 000235 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.299607] ACPI: Dynamic OEM Table Load: [ 0.299612] ACPI: SSDT 0xFFFF9157FA855800 0004B2 (v01 PmRef P001Cst 00003001 INTL 20051117) [ 0.300555] ACPI: Dynamic OEM Table Load: [ 0.300560] ACPI: SSDT 0xFFFF9157FABCD800 000235 (v01 DpgPmm P002Ist 00000012 INTL 20051117) [ 0.301172] ACPI: Dynamic OEM Table Load: [ 0.301176] ACPI: SSDT 0xFFFF9157FA915F00 000085 (v01 PmRef P002Cst 00003000 INTL 20051117) [ 0.301944] ACPI: Dynamic OEM Table Load: [ 0.301949] ACPI: SSDT 0xFFFF9157FABCF800 000235 (v01 DpgPmm P003Ist 00000012 INTL 20051117) [ 0.302561] ACPI: Dynamic OEM Table Load: [ 0.302566] ACPI: SSDT 0xFFFF9157FA915C00 000085 (v01 PmRef P003Cst 00003000 INTL 20051117) [ 0.303339] ACPI: Dynamic OEM Table Load: [ 0.303344] ACPI: SSDT 0xFFFF9157FABCE400 000235 (v01 DpgPmm P004Ist 00000012 INTL 20051117) [ 0.303959] ACPI: Dynamic OEM Table Load: [ 0.303963] ACPI: SSDT 0xFFFF9157FA9156C0 000085 (v01 PmRef P004Cst 00003000 INTL 20051117) [ 0.306455] ACPI: Interpreter enabled [ 0.306474] ACPI: (supports S0 S1 S4 S5) [ 0.306476] ACPI: Using IOAPIC for interrupt routing [ 0.306515] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.309978] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.310001] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.311073] ACPI: Enabled 14 GPEs in block 00 to 3F [ 0.330774] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.330780] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.331056] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR] [ 0.331189] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.331191] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.331193] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.331195] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.331340] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000cc800-0x000d25ff]) [ 0.331595] PCI host bridge to bus 0000:00 [ 0.331597] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.331599] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.331600] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.331602] pci_bus 0000:00: root bus resource [mem 0xb7e00001-0xdfffffff window] [ 0.331603] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window] [ 0.331605] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.331616] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000 [ 0.331638] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset [ 0.331640] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability [ 0.331741] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000 [ 0.331752] pci 0000:00:02.0: reg 0x10: [mem 0xfe800000-0xfebfffff 64bit] [ 0.331757] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.331761] pci 0000:00:02.0: reg 0x20: [io 0xec00-0xec07] [ 0.331875] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000 [ 0.331884] pci 0000:00:02.1: reg 0x10: [mem 0xfe600000-0xfe6fffff 64bit] [ 0.332020] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000 [ 0.332036] pci 0000:00:19.0: reg 0x10: [mem 0xfe7c0000-0xfe7dffff] [ 0.332043] pci 0000:00:19.0: reg 0x14: [mem 0xfe7fb000-0xfe7fbfff] [ 0.332049] pci 0000:00:19.0: reg 0x18: [io 0xe880-0xe89f] [ 0.332108] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.332212] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300 [ 0.332250] pci 0000:00:1a.0: reg 0x20: [io 0xe800-0xe81f] [ 0.332383] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300 [ 0.332421] pci 0000:00:1a.1: reg 0x20: [io 0xe480-0xe49f] [ 0.332558] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300 [ 0.332597] pci 0000:00:1a.2: reg 0x20: [io 0xe400-0xe41f] [ 0.332741] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320 [ 0.332760] pci 0000:00:1a.7: reg 0x10: [mem 0xfe7fac00-0xfe7fafff] [ 0.332834] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.332941] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300 [ 0.332959] pci 0000:00:1b.0: reg 0x10: [mem 0xfe7f4000-0xfe7f7fff 64bit] [ 0.333023] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.333125] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300 [ 0.333164] pci 0000:00:1d.0: reg 0x20: [io 0xe080-0xe09f] [ 0.333296] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300 [ 0.333335] pci 0000:00:1d.1: reg 0x20: [io 0xe000-0xe01f] [ 0.333465] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300 [ 0.333503] pci 0000:00:1d.2: reg 0x20: [io 0xdc00-0xdc1f] [ 0.333643] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320 [ 0.333662] pci 0000:00:1d.7: reg 0x10: [mem 0xfe7fa800-0xfe7fabff] [ 0.333736] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.333842] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.333987] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100 [ 0.334183] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 0.334198] pci 0000:00:1f.2: reg 0x10: [io 0xd880-0xd887] [ 0.334204] pci 0000:00:1f.2: reg 0x14: [io 0xd800-0xd803] [ 0.334211] pci 0000:00:1f.2: reg 0x18: [io 0xd480-0xd487] [ 0.334217] pci 0000:00:1f.2: reg 0x1c: [io 0xd400-0xd403] [ 0.334223] pci 0000:00:1f.2: reg 0x20: [io 0xd080-0xd09f] [ 0.334230] pci 0000:00:1f.2: reg 0x24: [mem 0xfe7fa000-0xfe7fa7ff] [ 0.334266] pci 0000:00:1f.2: PME# supported from D3hot [ 0.334371] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500 [ 0.334387] pci 0000:00:1f.3: reg 0x10: [mem 0xfe7f9c00-0xfe7f9cff 64bit] [ 0.334404] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.334519] pci_bus 0000:01: extended config space not accessible [ 0.334571] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 0.334578] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.334580] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.334581] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.334583] pci 0000:00:1e.0: bridge window [mem 0xb7e00001-0xdfffffff window] (subtractive decode) [ 0.334584] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode) [ 0.336793] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.336881] ACPI: PCI Interrupt Link [LNKB] (IRQs 5) *0, disabled. [ 0.336968] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.337057] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.337145] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.337233] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.337321] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.337409] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.337550] SCSI subsystem initialized [ 0.337550] libata version 3.00 loaded. [ 0.337550] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.337550] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.337550] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.337550] vgaarb: loaded [ 0.337550] ACPI: bus type USB registered [ 0.337550] usbcore: registered new interface driver usbfs [ 0.337550] usbcore: registered new interface driver hub [ 0.337550] usbcore: registered new device driver usb [ 0.337550] pps_core: LinuxPPS API ver. 1 registered [ 0.337550] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.337550] PTP clock support registered [ 0.337550] EDAC MC: Ver: 3.0.0 [ 0.337550] PCI: Using ACPI for IRQ routing [ 0.343850] PCI: pci_cache_line_size set to 64 bytes [ 0.343885] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.343887] e820: reserve RAM buffer [mem 0x00093800-0x0009ffff] [ 0.343889] e820: reserve RAM buffer [mem 0xb7c90000-0xb7ffffff] [ 0.344012] NetLabel: Initializing [ 0.344013] NetLabel: domain hash size = 128 [ 0.344014] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.344032] NetLabel: unlabeled traffic allowed by default [ 0.344145] hpet: 8 channels of 4 reserved for per-cpu timers [ 0.344149] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 24, 25, 26, 27, 0 [ 0.344153] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.346202] clocksource: Switched to clocksource tsc-early [ 0.361441] VFS: Disk quotas dquot_6.6.0 [ 0.361462] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.361498] *** VALIDATE hugetlbfs *** [ 0.361619] AppArmor: AppArmor Filesystem Enabled [ 0.361655] pnp: PnP ACPI init [ 0.361762] system 00:00: [mem 0xfed14000-0xfed19fff] could not be reserved [ 0.361764] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.361770] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.361859] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.362526] pnp 00:02: [dma 0 disabled] [ 0.362606] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.364119] pnp 00:03: [dma 0 disabled] [ 0.364430] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.364544] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.364811] system 00:05: [io 0x0a00-0x0a0f] has been reserved [ 0.364813] system 00:05: [io 0x0a10-0x0a1f] has been reserved [ 0.364815] system 00:05: [io 0x0a20-0x0a2f] has been reserved [ 0.364816] system 00:05: [io 0x0a30-0x0a3f] has been reserved [ 0.364821] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.365047] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.365049] system 00:06: [io 0x04c0-0x04cf] has been reserved [ 0.365050] system 00:06: [io 0x04d2-0x04ff] has been reserved [ 0.365052] system 00:06: [io 0x0800-0x087f] has been reserved [ 0.365056] system 00:06: [io 0x0480-0x04bf] has been reserved [ 0.365058] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.365060] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.365062] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.365067] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.365206] system 00:07: [mem 0xffc00000-0xffefffff] has been reserved [ 0.365211] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.365374] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.365376] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.365380] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.366029] pnp 00:09: [dma 0 disabled] [ 0.366120] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.366218] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.366223] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.366559] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.366561] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.366562] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.366564] system 00:0b: [mem 0x00100000-0xb7e00000] could not be reserved [ 0.366566] system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.366571] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.366767] pnp: PnP ACPI: found 12 devices [ 0.370411] thermal_sys: Registered thermal governor 'fair_share' [ 0.370412] thermal_sys: Registered thermal governor 'bang_bang' [ 0.370413] thermal_sys: Registered thermal governor 'step_wise' [ 0.370414] thermal_sys: Registered thermal governor 'user_space' [ 0.370415] thermal_sys: Registered thermal governor 'power_allocator' [ 0.374908] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.374958] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.374968] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.374970] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.374971] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.374973] pci_bus 0000:00: resource 7 [mem 0xb7e00001-0xdfffffff window] [ 0.374974] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed8ffff window] [ 0.374976] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] [ 0.374977] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] [ 0.374979] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.374980] pci_bus 0000:01: resource 7 [mem 0xb7e00001-0xdfffffff window] [ 0.374981] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfed8ffff window] [ 0.375105] NET: Registered protocol family 2 [ 0.375365] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.375430] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.375580] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.375648] TCP: Hash tables configured (established 32768 bind 32768) [ 0.375711] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.375735] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.375839] NET: Registered protocol family 1 [ 0.375847] NET: Registered protocol family 44 [ 0.375860] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.377223] PCI: CLS 32 bytes, default 64 [ 0.377288] Trying to unpack rootfs image as initramfs... [ 0.603338] random: fast init done [ 1.418414] Freeing initrd memory: 66632K [ 1.418474] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.418477] software IO TLB: mapped [mem 0xb3c90000-0xb7c90000] (64MB) [ 1.418720] check: Scanning for low memory corruption every 60 seconds [ 1.419197] Initialise system trusted keyrings [ 1.419207] Key type blacklist registered [ 1.419294] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.421266] zbud: loaded [ 1.421776] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.422030] fuse: init (API version 7.31) [ 1.422190] Platform Keyring initialized [ 1.427322] Key type asymmetric registered [ 1.427340] Asymmetric key parser 'x509' registered [ 1.427361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.427432] io scheduler mq-deadline registered [ 1.427673] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.427746] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 1.427747] vesafb: scrolling: redraw [ 1.427748] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.427762] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 1216k, total 1216k [ 1.427832] fbcon: Deferring console take-over [ 1.427833] fb0: VESA VGA frame buffer device [ 1.427849] intel_idle: does not run on family 6 model 23 [ 1.427981] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.427999] ACPI: Power Button [PWRB] [ 1.428049] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.428061] ACPI: Power Button [PWRF] [ 1.428230] Monitor-Mwait will be used to enter C-1 state [ 1.428237] Monitor-Mwait will be used to enter C-2 state [ 1.428241] tsc: Marking TSC unstable due to TSC halts in idle [ 1.428526] clocksource: Switched to clocksource hpet [ 1.429341] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.449745] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.470231] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.473153] Linux agpgart interface v0.103 [ 1.476079] loop: module loaded [ 1.476389] libphy: Fixed MDIO Bus: probed [ 1.476390] tun: Universal TUN/TAP device driver, 1.6 [ 1.476447] PPP generic driver version 2.4.2 [ 1.476518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.476521] ehci-pci: EHCI PCI platform driver [ 1.476706] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.476712] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.476723] ehci-pci 0000:00:1a.7: debug port 1 [ 1.480646] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.480661] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7fac00 [ 1.495343] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.495414] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 1.495416] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.495418] usb usb1: Product: EHCI Host Controller [ 1.495420] usb usb1: Manufacturer: Linux 5.3.0-53-generic ehci_hcd [ 1.495422] usb usb1: SerialNumber: ... [ 1.495583] hub 1-0:1.0: USB hub found [ 1.495591] hub 1-0:1.0: 6 ports detected [ 1.495956] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.495963] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.495972] ehci-pci 0000:00:1d.7: debug port 1 [ 1.499872] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.499882] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7fa800 [ 1.515347] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.515397] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 1.515399] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.515401] usb usb2: Product: EHCI Host Controller [ 1.515403] usb usb2: Manufacturer: Linux 5.3.0-53-generic ehci_hcd [ 1.515405] usb usb2: SerialNumber: ... [ 1.515550] hub 2-0:1.0: USB hub found [ 1.515562] hub 2-0:1.0: 6 ports detected [ 1.515814] ehci-platform: EHCI generic platform driver [ 1.515826] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.515829] ohci-pci: OHCI PCI platform driver [ 1.515840] ohci-platform: OHCI generic platform driver [ 1.515846] uhci_hcd: USB Universal Host Controller Interface driver [ 1.515961] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.515966] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.515971] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.515993] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e800 [ 1.516043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 1.516045] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.516046] usb usb3: Product: UHCI Host Controller [ 1.516048] usb usb3: Manufacturer: Linux 5.3.0-53-generic uhci_hcd [ 1.516049] usb usb3: SerialNumber: ... [ 1.516177] hub 3-0:1.0: USB hub found [ 1.516184] hub 3-0:1.0: 2 ports detected [ 1.516408] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.516414] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.516419] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.516443] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e480 [ 1.516489] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 1.516491] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.516492] usb usb4: Product: UHCI Host Controller [ 1.516494] usb usb4: Manufacturer: Linux 5.3.0-53-generic uhci_hcd [ 1.516495] usb usb4: SerialNumber: ... [ 1.516617] hub 4-0:1.0: USB hub found [ 1.516623] hub 4-0:1.0: 2 ports detected [ 1.516846] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.516851] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.516864] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.516886] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e400 [ 1.516941] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 1.516943] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.516944] usb usb5: Product: UHCI Host Controller [ 1.516946] usb usb5: Manufacturer: Linux 5.3.0-53-generic uhci_hcd [ 1.516947] usb usb5: SerialNumber: ... [ 1.517071] hub 5-0:1.0: USB hub found [ 1.517077] hub 5-0:1.0: 2 ports detected [ 1.517289] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.517297] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.517302] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.517317] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080 [ 1.517363] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 1.517365] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.517367] usb usb6: Product: UHCI Host Controller [ 1.517368] usb usb6: Manufacturer: Linux 5.3.0-53-generic uhci_hcd [ 1.517369] usb usb6: SerialNumber: ... [ 1.517493] hub 6-0:1.0: USB hub found [ 1.517504] hub 6-0:1.0: 2 ports detected [ 1.517716] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.517720] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.517725] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.517741] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000 [ 1.517788] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 1.517789] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.517791] usb usb7: Product: UHCI Host Controller [ 1.517792] usb usb7: Manufacturer: Linux 5.3.0-53-generic uhci_hcd [ 1.517793] usb usb7: SerialNumber: ... [ 1.517916] hub 7-0:1.0: USB hub found [ 1.517923] hub 7-0:1.0: 2 ports detected [ 1.518142] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.518147] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.518152] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.518167] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 [ 1.518213] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 1.518215] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.518216] usb usb8: Product: UHCI Host Controller [ 1.518217] usb usb8: Manufacturer: Linux 5.3.0-53-generic uhci_hcd [ 1.518219] usb usb8: SerialNumber: ... [ 1.518334] hub 8-0:1.0: USB hub found [ 1.518341] hub 8-0:1.0: 2 ports detected [ 1.518521] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 1.518522] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 1.518893] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.518935] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.519060] mousedev: PS/2 mouse device common for all mice [ 1.519266] rtc_cmos 00:01: RTC can wake from S4 [ 1.519466] rtc_cmos 00:01: registered as rtc0 [ 1.519485] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.519494] i2c /dev entries driver [ 1.519548] device-mapper: uevent: version 1.0.3 [ 1.519644] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: XXX@XXX [ 1.519664] platform eisa.0: Probing EISA bus 0 [ 1.519666] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.519667] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.519669] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.519670] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.519672] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.519673] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.519674] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.519676] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.519677] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.519679] platform eisa.0: EISA: Detected 0 cards [ 1.519682] intel_pstate: CPU model not supported [ 1.519772] ledtrig-cpu: registered to indicate activity on CPUs [ 1.520078] NET: Registered protocol family 10 [ 1.527909] Segment Routing with IPv6 [ 1.527942] NET: Registered protocol family 17 [ 1.528018] Key type dns_resolver registered [ 1.528367] RAS: Correctable Errors collector initialized. [ 1.528414] microcode: sig=0x1067a, pf=0x10, revision=0xa0b [ 1.528506] microcode: Microcode Update Driver: v2.2. [ 1.528752] registered taskstats version 1 [ 1.528763] Loading compiled-in X.509 certificates [ 1.531141] Loaded X.509 cert 'Build time autogenerated kernel key: 08838d266c8704d3d582ec0b8cbad5486d1a5fab' [ 1.531193] zswap: loaded using pool lzo/zbud [ 1.538457] Key type big_key registered [ 1.542006] Key type encrypted registered [ 1.542011] AppArmor: AppArmor sha1 policy hashing enabled [ 1.542019] ima: No TPM chip found, activating TPM-bypass! [ 1.542024] ima: Allocated hash algorithm: sha1 [ 1.542032] No architecture policies found [ 1.542042] evm: Initialising EVM extended attributes: [ 1.542042] evm: security.selinux [ 1.542043] evm: security.SMACK64 [ 1.542044] evm: security.SMACK64EXEC [ 1.542044] evm: security.SMACK64TRANSMUTE [ 1.542045] evm: security.SMACK64MMAP [ 1.542045] evm: security.apparmor [ 1.542046] evm: security.ima [ 1.542047] evm: security.capability [ 1.542047] evm: HMAC attrs: 0x1 [ 1.542513] PM: Magic number: 4:454:751 [ 1.542522] misc uinput: hash matches [ 1.542547] tty ttyS2: hash matches [ 1.542667] rtc_cmos 00:01: setting system clock to 2020-05-22T20:44:55 UTC (1590180295) [ 1.543761] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 1.545805] Freeing unused decrypted memory: 2040K [ 1.546795] Freeing unused kernel image memory: 2664K [ 1.567370] Write protecting the kernel read-only data: 22528k [ 1.568303] Freeing unused kernel image memory: 2008K [ 1.568918] Freeing unused kernel image memory: 1476K [ 1.584170] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.584192] x86/mm: Checking user space page tables [ 1.599105] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.599109] Run /init as init process [ 1.616449] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.616591] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.616599] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.717356] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.717357] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.717570] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.720254] ahci 0000:00:1f.2: version 3.0 [ 1.720392] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 1.720458] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.720488] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 1.720491] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs [ 1.776254] pci 0000:00:00.0: Intel Q45/Q43 Chipset [ 1.776275] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.776735] pci 0000:00:00.0: detected 131072K stolen memory [ 1.776820] checking generic (d0000000 130000) vs hw (d0000000 10000000) [ 1.776821] fb0: switching to inteldrmfb from VESA VGA [ 1.776930] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.777690] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.777692] [drm] Driver supports precise vblank timestamp query. [ 1.778299] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.788059] scsi host0: ahci [ 1.788264] scsi host1: ahci [ 1.788444] scsi host2: ahci [ 1.788636] scsi host3: ahci [ 1.788779] scsi host4: ahci [ 1.788952] scsi host5: ahci [ 1.789032] ata1: SATA max UDMA/133 abar m2048@0xfe7fa000 port 0xfe7fa100 irq 29 [ 1.789034] ata2: SATA max UDMA/133 abar m2048@0xfe7fa000 port 0xfe7fa180 irq 29 [ 1.789035] ata3: SATA max UDMA/133 abar m2048@0xfe7fa000 port 0xfe7fa200 irq 29 [ 1.789037] ata4: SATA max UDMA/133 abar m2048@0xfe7fa000 port 0xfe7fa280 irq 29 [ 1.789038] ata5: SATA max UDMA/133 abar m2048@0xfe7fa000 port 0xfe7fa300 irq 29 [ 1.789040] ata6: SATA max UDMA/133 abar m2048@0xfe7fa000 port 0xfe7fa380 irq 29 [ 1.796964] [drm] RC6 disabled, disabling runtime PM support [ 1.805774] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 1.829583] fbcon: i915drmfb (fb0) is primary device [ 1.829585] fbcon: Deferring console take-over [ 1.829587] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 1.884808] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 1.884811] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.884864] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF [ 1.900415] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 1.999353] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 2.101679] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.102683] ata1.00: ATA-8: ST3500414CS, SC13, max UDMA/133 [ 2.102685] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32) [ 2.103854] ata1.00: configured for UDMA/133 [ 2.104034] scsi 0:0:0:0: Direct-Access ATA ST3500414CS SC13 PQ: 0 ANSI: 5 [ 2.104266] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.104300] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.104318] sd 0:0:0:0: [sda] Write Protect is off [ 2.104320] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.104394] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.152441] sda: sda1 sda2 sda3 < sda5 sda6 > sda4 [ 2.153154] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.197032] usb 3-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00 [ 2.197035] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.197037] usb 3-1: Product: USB Keyboard [ 2.197039] usb 3-1: Manufacturer: Logitech [ 2.227569] hidraw: raw HID events driver (C) Jiri Kosina [ 2.270404] usbcore: registered new interface driver usbhid [ 2.270405] usbhid: USB HID core driver [ 2.271358] usb 6-2: new full-speed USB device number 2 using uhci_hcd [ 2.272850] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:046D:C31C.0001/input/input5 [ 2.331462] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1/input0 [ 2.331823] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0002/input/input6 [ 2.391440] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0002/input/input7 [ 2.391534] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1/input1 [ 2.417679] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.419433] ata2.00: ATAPI: ATAPI DVD A DH16AASH, SA15, max UDMA/100 [ 2.420172] ata2.00: configured for UDMA/100 [ 2.424377] scsi 1:0:0:0: CD-ROM ATAPI DVD A DH16AASH SA15 PQ: 0 ANSI: 5 [ 2.457478] sr 1:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.457480] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.457760] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.457834] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.662372] usb 6-2: New USB device found, idVendor=1d57, idProduct=fa20, bcdDevice=10.01 [ 2.662375] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.662377] usb 6-2: Product: 2.4G Receiver [ 2.662379] usb 6-2: Manufacturer: Compx [ 2.668828] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:1D57:FA20.0003/input/input8 [ 2.727470] hid-generic 0003:1D57:FA20.0003: input,hidraw2: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-0000:00:1d.0-2/input0 [ 2.730856] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/0003:1D57:FA20.0004/input/input9 [ 2.730959] hid-generic 0003:1D57:FA20.0004: input,hidraw3: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-0000:00:1d.0-2/input1 [ 2.732888] input: Compx 2.4G Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:1D57:FA20.0005/input/input10 [ 2.759344] usb 2-4: new high-speed USB device number 3 using ehci-pci [ 2.769665] ata3: SATA link down (SStatus 0 SControl 300) [ 2.791460] input: Compx 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:1D57:FA20.0005/input/input11 [ 2.791570] hid-generic 0003:1D57:FA20.0005: input,hidraw4: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-0000:00:1d.0-2/input2 [ 2.800305] usb 2-4: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 [ 2.800308] usb 2-4: New USB device strings: Mfr=16, Product=32, SerialNumber=... [ 2.800310] usb 2-4: Product: USB2.0 WLAN [ 2.800312] usb 2-4: Manufacturer: ATHEROS [ 2.800314] usb 2-4: SerialNumber: ... [ 3.081693] ata4: SATA link down (SStatus 0 SControl 300) [ 3.393687] ata5: SATA link down (SStatus 0 SControl 300) [ 3.705698] ata6: SATA link down (SStatus 0 SControl 300) [ 4.843349] raid6: sse2x4 gen() 7941 MB/s [ 4.891339] raid6: sse2x4 xor() 5961 MB/s [ 4.939341] raid6: sse2x2 gen() 5294 MB/s [ 4.987352] raid6: sse2x2 xor() 5431 MB/s [ 5.035340] raid6: sse2x1 gen() 4250 MB/s [ 5.083341] raid6: sse2x1 xor() 4427 MB/s [ 5.083342] raid6: using algorithm sse2x4 gen() 7941 MB/s [ 5.083343] raid6: .... xor() 5961 MB/s, rmw enabled [ 5.083348] raid6: using ssse3x2 recovery algorithm [ 5.087125] xor: measuring software checksum speed [ 5.123335] prefetch64-sse: 14766.000 MB/sec [ 5.163334] generic_sse: 12529.000 MB/sec [ 5.163335] xor: using function: prefetch64-sse (14766.000 MB/sec) [ 5.189239] Btrfs loaded, crc32c=crc32c-generic [ 5.459822] sr 1:0:0:0: [sr0] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 5.459826] sr 1:0:0:0: [sr0] tag#23 Sense Key : Illegal Request [current] [ 5.459829] sr 1:0:0:0: [sr0] tag#23 Add. Sense: Logical block address out of range [ 5.459833] sr 1:0:0:0: [sr0] tag#23 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00 [ 5.459836] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 5.487842] sr 1:0:0:0: [sr0] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 5.487844] sr 1:0:0:0: [sr0] tag#24 Sense Key : Illegal Request [current] [ 5.487847] sr 1:0:0:0: [sr0] tag#24 Add. Sense: Logical block address out of range [ 5.487850] sr 1:0:0:0: [sr0] tag#24 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00 [ 5.487852] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 5.487855] Buffer I/O error on dev sr0, logical block 0, async page read [ 5.616930] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 6.511609] random: crng init done [ 6.511611] random: 7 urandom warning(s) missed due to ratelimiting [ 6.646482] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time. [ 7.053619] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.071461] systemd[1]: Detected architecture x86-64. [ 7.084677] systemd[1]: Set hostname to ... [ 10.473516] systemd[1]: Created slice System Slice. [ 10.473669] systemd[1]: Listening on LVM2 poll daemon socket. [ 10.473739] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 10.473827] systemd[1]: Listening on udev Control Socket. [ 10.474080] systemd[1]: Set up automount ... [ 10.474167] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.474234] systemd[1]: Listening on udev Kernel Socket. [ 10.757365] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 10.970264] systemd-journald[407]: Received request to flush runtime journal from PID 1 [ 11.027350] Adding 802440k swap on /swapfile. Priority:-2 extents:4 across:827016k FS [ 11.091205] lp: driver loaded but no devices found [ 11.107169] ppdev: user-space parallel port driver [ 11.176750] parport_pc 00:03: reported by Plug and Play ACPI [ 11.176821] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 11.259571] systemd-journald[407]: File /var/log/journal/502d9e9965e84076a95a4853fddeb462/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 11.267470] lp0: using parport0 (interrupt-driven). [ 13.722836] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20190703/utaddress-213) [ 13.722843] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.722875] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 14.330447] gpio_ich gpio_ich.2.auto: GPIO from 440 to 511 [ 14.654369] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.656857] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 14.792088] intel_powerclamp: No package C-state available [ 14.827762] intel_powerclamp: No package C-state available [ 14.863763] intel_powerclamp: No package C-state available [ 14.903691] intel_powerclamp: No package C-state available [ 14.969173] usb 2-4: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 14.969919] usbcore: registered new interface driver ath9k_htc [ 15.404569] usb 2-4: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 15.656806] ath9k_htc 2-4:1.0: ath9k_htc: HTC initialized with 33 credits [ 15.890960] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x411111f0 [ 15.891575] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 15.891577] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x1a/0x0/0x0/0x0/0x0) [ 15.891578] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 15.891580] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 15.891581] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 15.891582] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 15.891584] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 15.891586] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 15.891587] snd_hda_codec_realtek hdaudioC0D0: Line=0x1c [ 15.917975] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 15.918048] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 15.918405] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 15.918486] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 15.918560] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 15.918637] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 15.918701] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 15.918765] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 15.918834] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 15.930316] ath9k_htc 2-4:1.0: ath9k_htc: FW Version: 1.4 [ 15.930318] ath9k_htc 2-4:1.0: FW RMW support: On [ 15.930320] ath: EEPROM regdomain: 0x809c [ 15.930320] ath: EEPROM indicates we should expect a country code [ 15.930322] ath: doing EEPROM country->regdmn map search [ 15.930323] ath: country maps to regdmn code: 0x52 [ 15.930324] ath: Country alpha2 being used: CN [ 15.930324] ath: Regpair used: 0x52 [ 15.935001] ieee80211 phy0: Atheros AR9271 Rev:1 [ 16.149857] ath9k_htc 2-4:1.0 wlxd85d4c8b3277: renamed from wlan0 [ 26.005760] fbcon: Taking over console [ 26.008999] Console: switching to colour frame buffer device 128x48 [ 27.505530] wlxd85d4c8b3277: authenticate with XX:XX:XX:XX:XX:XX [ 27.750730] wlxd85d4c8b3277: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 27.759714] wlxd85d4c8b3277: authenticated [ 27.763367] wlxd85d4c8b3277: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 27.768098] wlxd85d4c8b3277: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 27.776941] wlxd85d4c8b3277: associated [ 28.955056] IPv6: ADDRCONF(NETDEV_CHANGE): wlxd85d4c8b3277: link becomes ready [ 33.711654] rfkill: input handler disabled [ 2811.040129] wlxd85d4c8b3277: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 2811.235599] PM: suspend entry (s2idle) [ 2811.694028] Filesystems sync: 0.458 seconds [ 2811.694311] Freezing user space processes ... (elapsed 0.008 seconds) done. [ 2811.702752] OOM killer disabled. [ 2811.702753] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2811.703976] printk: Suspending console(s) (use no_console_suspend to debug) [ 2811.705289] serial 00:09: disabled [ 2811.705738] parport_pc 00:03: disabled [ 2811.706181] serial 00:02: disabled [ 2811.707508] e1000e: EEE TX LPI TIMER: 00000000 [ 2811.723468] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2811.798987] sd 0:0:0:0: [sda] Stopping disk [ 2812.138067] e1000e 0000:00:19.0 enp0s25: MAC Wakeup cause - Unicast Packet [ 2812.138182] usb usb3: root hub lost power or was reset [ 2812.138235] usb usb4: root hub lost power or was reset [ 2812.138279] usb usb5: root hub lost power or was reset [ 2812.138390] usb usb6: root hub lost power or was reset [ 2812.138425] usb usb7: root hub lost power or was reset [ 2812.138487] usb usb8: root hub lost power or was reset [ 2812.140679] serial 00:02: activated [ 2812.143437] parport_pc 00:03: activated [ 2812.145520] serial 00:09: activated [ 2812.146325] sd 0:0:0:0: [sda] Starting disk [ 2812.355345] usb 2-4: reset high-speed USB device number 3 using ehci-pci [ 2812.483354] usb 6-2: reset full-speed USB device number 2 using uhci_hcd [ 2812.521644] ata3: SATA link down (SStatus 0 SControl 300) [ 2812.521672] ata5: SATA link down (SStatus 0 SControl 300) [ 2812.521690] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2812.521706] ata4: SATA link down (SStatus 0 SControl 300) [ 2812.521724] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2812.521737] ata6: SATA link down (SStatus 0 SControl 300) [ 2812.524532] ata1.00: configured for UDMA/133 [ 2812.525350] ata2.00: configured for UDMA/100 [ 2812.623352] usb 3-1: reset low-speed USB device number 2 using uhci_hcd [ 2817.898795] usb 2-4: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 2818.151025] ath9k_htc 2-4:1.0: ath9k_htc: HTC initialized with 33 credits [ 2818.152598] OOM killer enabled. [ 2818.152599] Restarting tasks ... done. [ 2818.156344] PM: suspend exit [ 2818.352822] e1000e: enp0s25 NIC Link is Down [ 2820.147642] wlxd85d4c8b3277: authenticate with XX:XX:XX:XX:XX:XX [ 2820.383220] wlxd85d4c8b3277: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2820.392439] wlxd85d4c8b3277: authenticated [ 2820.395370] wlxd85d4c8b3277: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2820.400072] wlxd85d4c8b3277: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 2820.408932] wlxd85d4c8b3277: associated [ 2820.418035] IPv6: ADDRCONF(NETDEV_CHANGE): wlxd85d4c8b3277: link becomes ready [ 2876.962373] perf: interrupt took too long (2538 > 2500), lowering kernel.perf_event_max_sample_rate to 78750 [ 2919.478576] Bluetooth: Core ver 2.22 [ 2919.478607] NET: Registered protocol family 31 [ 2919.478608] Bluetooth: HCI device and connection manager initialized [ 2919.478613] Bluetooth: HCI socket layer initialized [ 2919.478616] Bluetooth: L2CAP socket layer initialized [ 2919.478620] Bluetooth: SCO socket layer initialized [ 2919.520563] Bluetooth: RFCOMM TTY layer initialized [ 2919.520580] Bluetooth: RFCOMM socket layer initialized [ 2919.520588] Bluetooth: RFCOMM ver 1.11 [ 2923.673401] perf: interrupt took too long (3245 > 3172), lowering kernel.perf_event_max_sample_rate to 61500 [ 3119.347436] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3119.347440] Bluetooth: BNEP filters: protocol multicast [ 3119.347451] Bluetooth: BNEP socket layer initialized [ 3147.992294] perf: interrupt took too long (4122 > 4056), lowering kernel.perf_event_max_sample_rate to 48500 [ 3536.854461] perf: interrupt took too long (5157 > 5152), lowering kernel.perf_event_max_sample_rate to 38750 [26584.807284] perf: interrupt took too long (6480 > 6446), lowering kernel.perf_event_max_sample_rate to 30750 [30008.988369] wlxd85d4c8b3277: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [30009.328604] PM: suspend entry (s2idle) [30009.732950] Filesystems sync: 0.404 seconds [30009.733228] Freezing user space processes ... (elapsed 0.001 seconds) done. [30009.735212] OOM killer disabled. [30009.735213] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [30009.736473] printk: Suspending console(s) (use no_console_suspend to debug) [30009.737620] serial 00:09: disabled [30009.738016] parport_pc 00:03: disabled [30009.738425] serial 00:02: disabled [30009.739633] e1000e: EEE TX LPI TIMER: 00000000 [30009.753004] sd 0:0:0:0: [sda] Synchronizing SCSI cache [30009.842689] sd 0:0:0:0: [sda] Stopping disk [30010.181996] e1000e 0000:00:19.0 enp0s25: MAC Wakeup cause - Unicast Packet [30010.182113] usb usb4: root hub lost power or was reset [30010.182146] usb usb5: root hub lost power or was reset [30010.182253] usb usb6: root hub lost power or was reset [30010.182308] usb usb7: root hub lost power or was reset [30010.182347] usb usb8: root hub lost power or was reset [30010.182990] usb usb3: root hub lost power or was reset [30010.184976] serial 00:02: activated [30010.188084] parport_pc 00:03: activated [30010.190617] serial 00:09: activated [30010.191351] sd 0:0:0:0: [sda] Starting disk [30010.535357] usb 6-2: reset full-speed USB device number 2 using uhci_hcd [30010.569656] ata4: SATA link down (SStatus 0 SControl 300) [30010.569673] ata3: SATA link down (SStatus 0 SControl 300) [30010.569692] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [30010.569710] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [30010.569725] ata6: SATA link down (SStatus 0 SControl 300) [30010.569741] ata5: SATA link down (SStatus 0 SControl 300) [30010.572195] ata2.00: configured for UDMA/100 [30010.572532] ata1.00: configured for UDMA/133 [30010.667358] usb 3-1: reset low-speed USB device number 2 using uhci_hcd [30010.758021] usb 2-4: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [30011.010506] ath9k_htc 2-4:1.0: ath9k_htc: HTC initialized with 33 credits [30011.027990] OOM killer enabled. [30011.027991] Restarting tasks ... done. [30011.038136] PM: suspend exit [30014.040861] e1000e: enp0s25 NIC Link is Down [30015.852889] wlxd85d4c8b3277: authenticate with XX:XX:XX:XX:XX:XX [30016.086497] wlxd85d4c8b3277: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30016.096732] wlxd85d4c8b3277: authenticated [30016.099352] wlxd85d4c8b3277: associate with XX:XX:XX:XX:XX:XX (try 1/3) [30016.104093] wlxd85d4c8b3277: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2) [30016.112950] wlxd85d4c8b3277: associated [30016.122306] IPv6: ADDRCONF(NETDEV_CHANGE): wlxd85d4c8b3277: link becomes ready [33999.008950] wlxd85d4c8b3277: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [33999.356591] PM: suspend entry (s2idle) [33999.776638] Filesystems sync: 0.420 seconds [33999.776929] Freezing user space processes ... (elapsed 0.002 seconds) done. [33999.779462] OOM killer disabled. [33999.779463] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [33999.780759] printk: Suspending console(s) (use no_console_suspend to debug) [33999.782100] serial 00:09: disabled [33999.782571] parport_pc 00:03: disabled [33999.783016] serial 00:02: disabled [33999.784331] e1000e: EEE TX LPI TIMER: 00000000 [33999.795582] sd 0:0:0:0: [sda] Synchronizing SCSI cache [33999.900132] sd 0:0:0:0: [sda] Stopping disk [34000.236237] usb usb3: root hub lost power or was reset [34000.236315] usb usb4: root hub lost power or was reset [34000.236391] usb usb5: root hub lost power or was reset [34000.236579] usb usb6: root hub lost power or was reset [34000.236633] usb usb7: root hub lost power or was reset [34000.236676] usb usb8: root hub lost power or was reset [34000.238076] e1000e 0000:00:19.0 enp0s25: MAC Wakeup cause - Unicast Packet [34000.238864] serial 00:02: activated [34000.241533] parport_pc 00:03: activated [34000.243673] serial 00:09: activated [34000.244944] sd 0:0:0:0: [sda] Starting disk [34000.591359] usb 6-2: reset full-speed USB device number 2 using uhci_hcd [34000.617638] ata3: SATA link down (SStatus 0 SControl 300) [34000.617679] ata4: SATA link down (SStatus 0 SControl 300) [34000.617695] ata5: SATA link down (SStatus 0 SControl 300) [34000.617712] ata6: SATA link down (SStatus 0 SControl 300) [34000.617728] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [34000.617751] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [34000.620228] ata2.00: configured for UDMA/100 [34000.620594] ata1.00: configured for UDMA/133 [34000.727356] usb 3-1: reset low-speed USB device number 2 using uhci_hcd [34000.806377] usb 2-4: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [34001.058607] ath9k_htc 2-4:1.0: ath9k_htc: HTC initialized with 33 credits [34001.088845] OOM killer enabled. [34001.088846] Restarting tasks ... done. [34001.095160] PM: suspend exit [34004.164453] e1000e: enp0s25 NIC Link is Down [34005.974453] wlxd85d4c8b3277: authenticate with XX:XX:XX:XX:XX:XX [34006.214901] wlxd85d4c8b3277: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [34006.225605] wlxd85d4c8b3277: authenticated [34006.227361] wlxd85d4c8b3277: associate with XX:XX:XX:XX:XX:XX (try 1/3) [34006.232102] wlxd85d4c8b3277: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [34006.240962] wlxd85d4c8b3277: associated [34006.250082] IPv6: ADDRCONF(NETDEV_CHANGE): wlxd85d4c8b3277: link becomes ready [42278.248851] Non-volatile memory driver v1.3 [42278.407778] st: Version 20160209, fixed bufsize 32768, s/g segs 256