[ 0.000000] Linux version 6.12.38+deb13-amd64 (XXX@XXX) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.38-1 (2025-07-16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf04fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf05000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] DMI: Memory slots populated: 4/4 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.455 MHz processor [ 0.002581] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002584] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008896] AGP: No AGP bridge found [ 0.008956] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008963] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008965] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010740] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010748] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.016890] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] [ 0.016913] Using GB pages for direct mapping [ 0.018346] RAMDISK: [mem 0x28123000-0x30088fff] [ 0.018889] ACPI: Early table checksum verification disabled [ 0.018892] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.018897] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.018903] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.018908] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240827/tbfadt-611) [ 0.018913] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.018917] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.018920] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.018924] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.018927] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.018931] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.018934] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.018938] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.018941] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.018944] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] [ 0.018945] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] [ 0.018947] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] [ 0.018948] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] [ 0.018949] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] [ 0.018950] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] [ 0.018952] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] [ 0.018953] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] [ 0.018954] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] [ 0.018955] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] [ 0.019024] No NUMA configuration found [ 0.019025] Faking a node at [mem 0x0000000000000000-0x000000063effffff] [ 0.019037] NODE_DATA(0) allocated [mem 0x63efd3680-0x63effdfff] [ 0.019455] Zone ranges: [ 0.019456] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019458] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019460] Normal [mem 0x0000000100000000-0x000000063effffff] [ 0.019461] Device empty [ 0.019463] Movable zone start for each node [ 0.019466] Early memory node ranges [ 0.019467] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019468] node 0: [mem 0x0000000000100000-0x00000000bdf04fff] [ 0.019470] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] [ 0.019471] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] [ 0.019473] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] [ 0.019474] node 0: [mem 0x0000000100001000-0x000000063effffff] [ 0.019478] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] [ 0.019485] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019530] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.029594] On node 0, zone DMA32: 3876 pages in unavailable ranges [ 0.029621] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.029637] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.030550] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.030618] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.030856] ACPI: PM-Timer IO Port: 0x808 [ 0.030867] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.030875] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.030879] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.030882] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.030884] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.030888] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.030889] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.030900] CPU topo: Max. logical packages: 1 [ 0.030901] CPU topo: Max. logical dies: 1 [ 0.030901] CPU topo: Max. dies per package: 1 [ 0.030907] CPU topo: Max. threads per core: 1 [ 0.030908] CPU topo: Num. cores per package: 8 [ 0.030909] CPU topo: Num. threads per package: 8 [ 0.030910] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.030929] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.030932] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x000fffff] [ 0.030934] PM: hibernation: Registered nosave memory: [mem 0xbdf05000-0xbee28fff] [ 0.030936] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] [ 0.030938] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] [ 0.030940] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0x100000fff] [ 0.030942] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.030943] Booting paravirtualized kernel on bare hardware [ 0.030945] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.036545] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.037681] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 0.037689] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 0.037693] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.037716] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.037771] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64", will be passed to user space. [ 0.044332] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.047628] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.047722] Fallback order for Node 0: 0 [ 0.047728] Built 1 zonelists, mobility grouping on. Total pages: 6279885 [ 0.047729] Policy zone: Normal [ 0.047741] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.047743] AGP: Checking aperture... [ 0.054046] AGP: No AGP bridge found [ 0.054047] AGP: Node 0: aperture [bus addr 0x84dc000000-0x84ddffffff] (32MB) [ 0.054050] Aperture beyond 4GB. Ignoring. [ 0.054051] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.054051] AGP: Please enable the IOMMU option in the BIOS setup [ 0.054052] AGP: This costs you 64MB of RAM [ 0.054055] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.054058] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] [ 0.054122] software IO TLB: area num 8. [ 0.110584] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.110801] ftrace: allocating 45713 entries in 179 pages [ 0.124832] ftrace: allocated 179 pages with 5 groups [ 0.126086] Dynamic Preempt: voluntary [ 0.126338] rcu: Preemptible hierarchical RCU implementation. [ 0.126339] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.126341] Trampoline variant of Tasks RCU enabled. [ 0.126341] Rude variant of Tasks RCU enabled. [ 0.126342] Tracing variant of Tasks RCU enabled. [ 0.126343] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.126344] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.126361] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.126364] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.126366] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.134742] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.134962] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.135064] spurious 8259A interrupt: IRQ7. [ 0.138428] Console: colour VGA+ 80x25 [ 0.138431] printk: legacy console [tty0] enabled [ 0.138693] ACPI: Core revision 20240827 [ 0.138853] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.138866] APIC: Switch to symmetric I/O mode setup [ 0.139232] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.158866] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c972090b20, max_idle_ns: 440795228453 ns [ 0.158873] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.91 BogoMIPS (lpj=12373820) [ 0.158906] LVT offset 1 assigned for vector 0xf9 [ 0.158912] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.158914] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.158919] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.158922] Spectre V2 : Mitigation: Retpolines [ 0.158923] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.158924] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.158925] RETBleed: Mitigation: untrained return thunk [ 0.158927] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.158929] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.158934] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.158936] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.158937] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.158939] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.158941] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.190538] Freeing SMP alternatives memory: 40K [ 0.190545] pid_max: default: 32768 minimum: 301 [ 0.191392] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 0.191755] landlock: Up and running. [ 0.191757] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.191880] AppArmor: AppArmor initialized [ 0.191917] TOMOYO Linux initialized [ 0.192230] LSM support for eBPF active [ 0.192645] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.192726] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.306645] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.306869] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.306869] ... version: 0 [ 0.306869] ... bit width: 48 [ 0.306869] ... generic registers: 6 [ 0.306869] ... value mask: 0000ffffffffffff [ 0.306869] ... max period: 00007fffffffffff [ 0.306869] ... fixed-purpose events: 0 [ 0.306869] ... event mask: 000000000000003f [ 0.306869] signal: max sigframe size: 1776 [ 0.306869] rcu: Hierarchical SRCU implementation. [ 0.306869] rcu: Max phase no-delay instances is 1000. [ 0.306869] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.309224] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.309365] smp: Bringing up secondary CPUs ... [ 0.309567] smpboot: x86: Booting SMP configuration: [ 0.309569] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.354929] smp: Brought up 1 node, 8 CPUs [ 0.354929] smpboot: Total of 8 processors activated (49495.28 BogoMIPS) [ 0.413004] node 0 deferred pages initialised in 56ms [ 0.414919] Memory: 24358812K/25119540K available (16384K kernel code, 2486K rwdata, 11788K rodata, 4148K init, 4952K bss, 752788K reserved, 0K cma-reserved) [ 0.416175] devtmpfs: initialized [ 0.416175] x86/mm: Memory block size: 128MB [ 0.420298] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.420298] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.420298] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.420298] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.420298] pinctrl core: initialized pinctrl subsystem [ 0.420941] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.423261] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.423965] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.424699] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.424737] thermal_sys: Registered thermal governor 'fair_share' [ 0.424737] thermal_sys: Registered thermal governor 'bang_bang' [ 0.424737] thermal_sys: Registered thermal governor 'step_wise' [ 0.424737] thermal_sys: Registered thermal governor 'user_space' [ 0.424737] thermal_sys: Registered thermal governor 'power_allocator' [ 0.424737] cpuidle: using governor ladder [ 0.424737] cpuidle: using governor menu [ 0.424737] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.424737] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.424737] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved) [ 0.424737] PCI: Using configuration type 1 for base access [ 0.424737] PCI: Using configuration type 1 for extended access [ 0.424737] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.424737] mtrr: probably your BIOS does not setup all CPUs. [ 0.424737] mtrr: corrected configuration. [ 0.424737] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.428108] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.428108] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.428108] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.428108] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.431011] ACPI: Added _OSI(Module Device) [ 0.431013] ACPI: Added _OSI(Processor Device) [ 0.431015] ACPI: Added _OSI(Processor Aggregator Device) [ 0.434472] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.435120] ACPI: Interpreter enabled [ 0.435140] ACPI: PM: (supports S0 S3 S4 S5) [ 0.435142] ACPI: Using IOAPIC for interrupt routing [ 0.435290] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.435330] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.435345] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.435347] PCI: Using E820 reservations for host bridge windows [ 0.435489] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.443464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.443471] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.443853] PCI host bridge to bus 0000:00 [ 0.443857] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.443860] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.443862] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.443864] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.443867] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.443869] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.443872] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.443889] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 conventional PCI endpoint [ 0.444027] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 PCIe Root Port [ 0.444040] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.444044] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.444047] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.444053] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.444059] pci 0000:00:02.0: enabling Extended Tags [ 0.444084] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.444184] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 PCIe Root Port [ 0.444198] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.444203] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.444206] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.444215] pci 0000:00:04.0: enabling Extended Tags [ 0.444240] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.444332] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 PCIe Root Port [ 0.444345] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.444349] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.444358] pci 0000:00:05.0: enabling Extended Tags [ 0.444383] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.444478] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 PCIe Root Port [ 0.444491] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.444495] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.444504] pci 0000:00:06.0: enabling Extended Tags [ 0.444528] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.444621] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.444634] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.444638] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.444640] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.444649] pci 0000:00:09.0: enabling Extended Tags [ 0.444674] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.444772] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.444784] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.444789] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.444794] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.444800] pci 0000:00:0a.0: enabling Extended Tags [ 0.444824] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.444947] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.444961] pci 0000:00:11.0: BAR 0 [io 0xf090-0xf097] [ 0.444969] pci 0000:00:11.0: BAR 1 [io 0xf080-0xf083] [ 0.444977] pci 0000:00:11.0: BAR 2 [io 0xf070-0xf077] [ 0.444984] pci 0000:00:11.0: BAR 3 [io 0xf060-0xf063] [ 0.444992] pci 0000:00:11.0: BAR 4 [io 0xf050-0xf05f] [ 0.445000] pci 0000:00:11.0: BAR 5 [mem 0xfeb0b000-0xfeb0b3ff] [ 0.445107] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.445121] pci 0000:00:12.0: BAR 0 [mem 0xfeb0a000-0xfeb0afff] [ 0.445252] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.445266] pci 0000:00:12.2: BAR 0 [mem 0xfeb09000-0xfeb090ff] [ 0.445328] pci 0000:00:12.2: supports D1 D2 [ 0.445330] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.445420] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.445434] pci 0000:00:13.0: BAR 0 [mem 0xfeb08000-0xfeb08fff] [ 0.445557] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.445571] pci 0000:00:13.2: BAR 0 [mem 0xfeb07000-0xfeb070ff] [ 0.445632] pci 0000:00:13.2: supports D1 D2 [ 0.445634] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.445727] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.445859] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.445873] pci 0000:00:14.1: BAR 0 [io 0xf040-0xf047] [ 0.445881] pci 0000:00:14.1: BAR 1 [io 0xf030-0xf033] [ 0.445888] pci 0000:00:14.1: BAR 2 [io 0xf020-0xf027] [ 0.445896] pci 0000:00:14.1: BAR 3 [io 0xf010-0xf013] [ 0.445903] pci 0000:00:14.1: BAR 4 [io 0xf000-0xf00f] [ 0.445919] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.445921] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.445923] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.445925] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.446010] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint [ 0.446028] pci 0000:00:14.2: BAR 0 [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.446079] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.446160] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.446308] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.446332] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.446339] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.446443] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.446457] pci 0000:00:14.5: BAR 0 [mem 0xfeb06000-0xfeb06fff] [ 0.446577] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.446591] pci 0000:00:16.0: BAR 0 [mem 0xfeb05000-0xfeb05fff] [ 0.446718] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.446732] pci 0000:00:16.2: BAR 0 [mem 0xfeb04000-0xfeb040ff] [ 0.446793] pci 0000:00:16.2: supports D1 D2 [ 0.446795] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.446883] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.446945] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.446998] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.447052] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.447112] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.447173] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.447271] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.447286] pci 0000:01:00.0: BAR 0 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.447296] pci 0000:01:00.0: BAR 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.447303] pci 0000:01:00.0: BAR 4 [io 0xe000-0xe0ff] [ 0.447310] pci 0000:01:00.0: BAR 5 [mem 0xfea00000-0xfea3ffff] [ 0.447317] pci 0000:01:00.0: ROM [mem 0xfea40000-0xfea5ffff pref] [ 0.447323] pci 0000:01:00.0: enabling Extended Tags [ 0.447371] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.447420] pci 0000:01:00.0: supports D1 D2 [ 0.447422] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.447481] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.447568] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 PCIe Legacy Endpoint [ 0.447583] pci 0000:01:00.1: BAR 0 [mem 0xfea60000-0xfea63fff 64bit] [ 0.447612] pci 0000:01:00.1: enabling Extended Tags [ 0.447657] pci 0000:01:00.1: supports D1 D2 [ 0.447746] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.447794] pci 0000:02:00.0: [1b4b:9120] type 00 class 0x010601 PCIe Legacy Endpoint [ 0.447806] pci 0000:02:00.0: BAR 0 [io 0xd090-0xd097] [ 0.447812] pci 0000:02:00.0: BAR 1 [io 0xd080-0xd083] [ 0.447819] pci 0000:02:00.0: BAR 2 [io 0xd070-0xd077] [ 0.447826] pci 0000:02:00.0: BAR 3 [io 0xd060-0xd063] [ 0.447832] pci 0000:02:00.0: BAR 4 [io 0xd050-0xd05f] [ 0.447839] pci 0000:02:00.0: BAR 5 [mem 0xfe915000-0xfe9157ff] [ 0.447846] pci 0000:02:00.0: ROM [mem 0xfe900000-0xfe90ffff pref] [ 0.447858] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.447884] pci 0000:02:00.0: PME# supported from D3hot [ 0.447963] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.448013] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.448031] pci 0000:03:00.0: BAR 0 [mem 0xfe800000-0xfe807fff 64bit] [ 0.448069] pci 0000:03:00.0: enabling Extended Tags [ 0.448115] pci 0000:03:00.0: supports D1 D2 [ 0.448117] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448218] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.448274] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.448292] pci 0000:04:00.0: BAR 0 [mem 0xfe700000-0xfe707fff 64bit] [ 0.448329] pci 0000:04:00.0: enabling Extended Tags [ 0.448375] pci 0000:04:00.0: supports D1 D2 [ 0.448377] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448475] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.448534] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 PCIe Endpoint [ 0.448554] pci 0000:05:00.0: BAR 0 [mem 0xfe610000-0xfe6107ff 64bit] [ 0.448563] pci 0000:05:00.0: BAR 2 [io 0xc000-0xc0ff] [ 0.448664] pci 0000:05:00.0: supports D2 [ 0.448666] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.448773] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 PCIe Legacy Endpoint [ 0.448789] pci 0000:05:00.1: BAR 0 [io 0xc140-0xc147] [ 0.448798] pci 0000:05:00.1: BAR 1 [io 0xc130-0xc133] [ 0.448807] pci 0000:05:00.1: BAR 2 [io 0xc120-0xc127] [ 0.448815] pci 0000:05:00.1: BAR 3 [io 0xc110-0xc113] [ 0.448824] pci 0000:05:00.1: BAR 4 [io 0xc100-0xc10f] [ 0.448839] pci 0000:05:00.1: ROM [mem 0xfe600000-0xfe60ffff pref] [ 0.448892] pci 0000:05:00.1: supports D2 [ 0.448893] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.454897] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.454959] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 PCIe Endpoint [ 0.454981] pci 0000:06:00.0: BAR 0 [mem 0xd0310000-0xd031ffff 64bit pref] [ 0.454996] pci 0000:06:00.0: BAR 2 [mem 0xd0300000-0xd030ffff 64bit pref] [ 0.455020] pci 0000:06:00.0: ROM [mem 0xfe500000-0xfe5007ff pref] [ 0.455103] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.455251] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.455265] pci_bus 0000:07: extended config space not accessible [ 0.455306] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 conventional PCI endpoint [ 0.455325] pci 0000:07:06.0: BAR 0 [mem 0xfe400000-0xfe4007ff] [ 0.455407] pci 0000:07:06.0: supports D1 D2 [ 0.455481] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.455489] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.455492] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.455494] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.455496] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.455498] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.455500] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.456167] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.456234] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.456300] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.456364] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.456418] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.456461] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.456504] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.456547] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.456758] iommu: Default domain type: Translated [ 0.456758] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.456758] pps_core: LinuxPPS API ver. 1 registered [ 0.456758] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.456758] PTP clock support registered [ 0.456758] EDAC MC: Ver: 3.0.0 [ 0.456758] NetLabel: Initializing [ 0.456758] NetLabel: domain hash size = 128 [ 0.456758] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.456758] NetLabel: unlabeled traffic allowed by default [ 0.456758] PCI: Using ACPI for IRQ routing [ 0.463887] PCI: pci_cache_line_size set to 64 bytes [ 0.463948] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff] [ 0.463951] e820: reserve RAM buffer [mem 0xbdf05000-0xbfffffff] [ 0.463953] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] [ 0.463955] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] [ 0.463956] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.463958] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] [ 0.463985] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.463985] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.463985] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.463985] vgaarb: loaded [ 0.463985] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.463985] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.465036] clocksource: Switched to clocksource tsc-early [ 0.465043] VFS: Disk quotas dquot_6.6.0 [ 0.465043] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.465043] AppArmor: AppArmor Filesystem Enabled [ 0.465043] pnp: PnP ACPI init [ 0.465043] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.465043] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.465043] system 00:03: [io 0x040b] has been reserved [ 0.465043] system 00:03: [io 0x04d6] has been reserved [ 0.465043] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.465043] system 00:03: [io 0x0c14] has been reserved [ 0.465043] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.465043] system 00:03: [io 0x0c52] has been reserved [ 0.465043] system 00:03: [io 0x0c6c] has been reserved [ 0.465043] system 00:03: [io 0x0c6f] has been reserved [ 0.465043] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.465043] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.465043] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.465043] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.465043] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.465043] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.465043] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.465043] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.465043] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.465043] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.465043] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.465043] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.465043] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.465043] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.465043] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.465043] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.465043] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.465043] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.465043] pnp 00:05: [dma 2] [ 0.465268] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.465535] pnp 00:09: [dma 0 disabled] [ 0.465679] pnp: PnP ACPI: found 10 devices [ 0.472942] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.473250] NET: Registered PF_INET protocol family [ 0.473622] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.491618] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.491687] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.492056] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.492770] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.493070] TCP: Hash tables configured (established 262144 bind 65536) [ 0.493407] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.493603] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.493743] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.493894] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.493911] NET: Registered PF_XDP protocol family [ 0.493933] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.493938] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.493942] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.493945] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.493949] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.493952] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.493955] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.493959] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.493962] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.493967] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.493969] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.493974] pci 0000:00:09.0: PCI bridge to [bus 05] [ 0.493976] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.493979] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.493983] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 0.493986] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.493989] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.493993] pci 0000:00:14.4: PCI bridge to [bus 07] [ 0.493997] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.494005] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.494008] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.494010] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.494012] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.494014] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.494016] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] [ 0.494018] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.494020] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.494022] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.494024] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.494026] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.494028] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.494031] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.494033] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.494035] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.494037] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] [ 0.494039] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.494041] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] [ 0.494043] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 0.494045] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 0.494047] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 0.494049] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 0.494051] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.494053] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] [ 0.515653] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x750 took 21033 usecs [ 0.531656] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x750 took 15443 usecs [ 0.547654] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x750 took 15425 usecs [ 0.563651] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x750 took 15611 usecs [ 0.563877] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.564232] PCI: CLS 64 bytes, default 64 [ 0.564338] Trying to unpack rootfs image as initramfs... [ 0.564813] PCI-DMA: Disabling AGP. [ 0.564887] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.564890] PCI-DMA: using GART IOMMU. [ 0.564892] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.565761] software IO TLB: tearing down default memory pool [ 0.568448] LVT offset 0 assigned for vector 0x400 [ 0.571812] perf: AMD IBS detected (0x000000ff) [ 0.572183] amd_uncore: 4 amd_nb counters detected [ 0.572967] Initialise system trusted keyrings [ 0.572981] Key type blacklist registered [ 0.573047] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.573057] zbud: loaded [ 0.573493] fuse: init (API version 7.41) [ 0.573873] integrity: Platform Keyring initialized [ 0.573882] integrity: Machine keyring initialized [ 0.598175] Key type asymmetric registered [ 0.598179] Asymmetric key parser 'x509' registered [ 1.182290] Freeing initrd memory: 130456K [ 1.189279] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.189357] io scheduler mq-deadline registered [ 1.191562] ledtrig-cpu: registered to indicate activity on CPUs [ 1.192457] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.193572] Could not retrieve perf counters (-19) [ 1.193795] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.193982] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.194975] Linux agpgart interface v0.103 [ 1.195916] i8042: PNP: No PS/2 controller found. [ 1.196007] mousedev: PS/2 mouse device common for all mice [ 1.196042] rtc_cmos 00:06: RTC can wake from S4 [ 1.196259] rtc_cmos 00:06: registered as rtc0 [ 1.196284] rtc_cmos 00:06: setting system clock to 2025-08-11T11:45:06 UTC (1754912706) [ 1.196321] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.196333] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.196840] NET: Registered PF_INET6 protocol family [ 1.202825] Segment Routing with IPv6 [ 1.202844] In-situ OAM (IOAM) with IPv6 [ 1.202868] mip6: Mobile IPv6 [ 1.202872] NET: Registered PF_PACKET protocol family [ 1.202926] mpls_gso: MPLS GSO support [ 1.202941] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.203524] microcode: Current revision: 0x0600063e [ 1.203526] microcode: Updated early from: 0x06000626 [ 1.203691] IPI shorthand broadcast: enabled [ 1.206279] sched_clock: Marking stable (1200004432, 3887076)->(1230978688, -27087180) [ 1.206577] registered taskstats version 1 [ 1.206755] Loading compiled-in X.509 certificates [ 1.235223] Loaded X.509 cert 'Build time autogenerated kernel key: ba77a71e64c453bc15410391734927a088a45279' [ 1.237969] Demotion targets for Node 0: null [ 1.238178] Key type .fscrypt registered [ 1.238179] Key type fscrypt-provisioning registered [ 1.264191] Key type encrypted registered [ 1.264197] AppArmor: AppArmor sha256 policy hashing enabled [ 1.264207] ima: No TPM chip found, activating TPM-bypass! [ 1.264210] ima: Allocated hash algorithm: sha256 [ 1.264222] ima: No architecture policies found [ 1.264238] evm: Initialising EVM extended attributes: [ 1.264239] evm: security.selinux [ 1.264240] evm: security.SMACK64 (disabled) [ 1.264242] evm: security.SMACK64EXEC (disabled) [ 1.264243] evm: security.SMACK64TRANSMUTE (disabled) [ 1.264244] evm: security.SMACK64MMAP (disabled) [ 1.264245] evm: security.apparmor [ 1.264246] evm: security.ima [ 1.264247] evm: security.capability [ 1.264248] evm: HMAC attrs: 0x1 [ 1.266031] RAS: Correctable Errors collector initialized. [ 1.273699] clk: Disabling unused clocks [ 1.273705] PM: genpd: Disabling unused power domains [ 1.276748] Freeing unused decrypted memory: 2028K [ 1.277752] Freeing unused kernel image (initmem) memory: 4148K [ 1.277785] Write protecting the kernel read-only data: 28672k [ 1.278176] Freeing unused kernel image (rodata/data gap) memory: 500K [ 1.347844] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.347858] Run /init as init process [ 1.347860] with arguments: [ 1.347863] /init [ 1.347864] with environment: [ 1.347865] HOME=/ [ 1.347866] TERM=linux [ 1.347867] BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64 [ 1.508588] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.508641] ACPI: button: Power Button [PWRB] [ 1.508739] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.524990] Floppy drive(s): fd0 is 1.44M [ 1.528737] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.528749] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 1.529435] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.530083] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 1.530717] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 1.531329] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 1.531431] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.532642] ACPI: button: Power Button [PWRF] [ 1.546682] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 1.546805] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 1.547845] FDC 0 is a post-1991 82077 [ 1.548430] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 1.575905] tsc: Refined TSC clocksource calibration: 3093.300 MHz [ 1.575917] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c968ef1f4e, max_idle_ns: 440795361724 ns [ 1.587173] clocksource: Switched to clocksource tsc [ 1.587860] ACPI: bus type USB registered [ 1.587945] usbcore: registered new interface driver usbfs [ 1.588755] usbcore: registered new interface driver hub [ 1.588789] usbcore: registered new device driver usb [ 1.592594] SCSI subsystem initialized [ 1.636508] ACPI: bus type drm_connector registered [ 1.637256] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 1.644957] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address XXX [ 1.644965] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.644970] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.644974] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.655397] QUIRK: Enable AMD PLL fix [ 1.655433] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.655441] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 1.655448] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.655457] ehci-pci 0000:00:13.2: debug port 1 [ 1.655508] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 1.655734] libata version 3.00 loaded. [ 1.656662] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 1.659995] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 1.667924] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.668001] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.668005] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.668007] usb usb1: Product: EHCI Host Controller [ 1.668009] usb usb1: Manufacturer: Linux 6.12.38+deb13-amd64 ehci_hcd [ 1.668011] usb usb1: SerialNumber: ... [ 1.668178] hub 1-0:1.0: USB hub found [ 1.668190] hub 1-0:1.0: 5 ports detected [ 1.668425] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.668432] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 2 [ 1.668438] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.668447] ehci-pci 0000:00:16.2: debug port 1 [ 1.668477] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 1.680002] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.680140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.680144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.680147] usb usb2: Product: EHCI Host Controller [ 1.680149] usb usb2: Manufacturer: Linux 6.12.38+deb13-amd64 ehci_hcd [ 1.680151] usb usb2: SerialNumber: ... [ 1.680300] hub 2-0:1.0: USB hub found [ 1.680313] hub 2-0:1.0: 4 ports detected [ 1.680575] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.680583] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.680588] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.680597] ehci-pci 0000:00:12.2: debug port 1 [ 1.680629] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 1.695921] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.695997] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.696001] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.696004] usb usb3: Product: EHCI Host Controller [ 1.696006] usb usb3: Manufacturer: Linux 6.12.38+deb13-amd64 ehci_hcd [ 1.696008] usb usb3: SerialNumber: ... [ 1.696200] hub 3-0:1.0: USB hub found [ 1.696209] hub 3-0:1.0: 5 ports detected [ 1.696454] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.696461] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 1.696528] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 1.696958] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.696964] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 1.696979] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 1.697049] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.697053] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.697056] usb usb4: Product: xHCI Host Controller [ 1.697058] usb usb4: Manufacturer: Linux 6.12.38+deb13-amd64 xhci-hcd [ 1.697061] usb usb4: SerialNumber: ... [ 1.697209] hub 4-0:1.0: USB hub found [ 1.697222] hub 4-0:1.0: 2 ports detected [ 1.699353] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.699414] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 1.699419] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.699423] usb usb5: Product: xHCI Host Controller [ 1.699425] usb usb5: Manufacturer: Linux 6.12.38+deb13-amd64 xhci-hcd [ 1.699428] usb usb5: SerialNumber: ... [ 1.699640] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.699750] hub 5-0:1.0: USB hub found [ 1.699767] hub 5-0:1.0: 2 ports detected [ 1.699977] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 1.700028] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 1.700113] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.700119] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 1.700178] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 1.700379] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.700385] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 1.700390] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 1.700485] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.700490] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.700494] usb usb7: Product: xHCI Host Controller [ 1.700497] usb usb7: Manufacturer: Linux 6.12.38+deb13-amd64 xhci-hcd [ 1.700499] usb usb7: SerialNumber: ... [ 1.700632] pata_via 0000:05:00.1: version 0.3.4 [ 1.701064] hub 7-0:1.0: USB hub found [ 1.701082] hub 7-0:1.0: 2 ports detected [ 1.701771] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.701833] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 1.701837] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.701840] usb usb8: Product: xHCI Host Controller [ 1.701843] usb usb8: Manufacturer: Linux 6.12.38+deb13-amd64 xhci-hcd [ 1.701845] usb usb8: SerialNumber: ... [ 1.703429] hub 8-0:1.0: USB hub found [ 1.703477] scsi host0: pata_via [ 1.703710] hub 8-0:1.0: 2 ports detected [ 1.704101] scsi host2: pata_via [ 1.704172] ata1: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 33 lpm-pol 0 [ 1.704176] ata2: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 33 lpm-pol 0 [ 1.704284] scsi host1: pata_atiixp [ 1.705697] scsi host3: pata_atiixp [ 1.706565] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 lpm-pol 0 [ 1.706569] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 lpm-pol 0 [ 1.763970] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.763976] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.763978] usb usb6: Product: OHCI PCI host controller [ 1.763981] usb usb6: Manufacturer: Linux 6.12.38+deb13-amd64 ohci_hcd [ 1.763983] usb usb6: SerialNumber: ... [ 1.764144] hub 6-0:1.0: USB hub found [ 1.764155] hub 6-0:1.0: 5 ports detected [ 1.764548] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.764555] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 1.764578] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 1.824104] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.824108] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.824110] usb usb9: Product: OHCI PCI host controller [ 1.824112] usb usb9: Manufacturer: Linux 6.12.38+deb13-amd64 ohci_hcd [ 1.824114] usb usb9: SerialNumber: ... [ 1.824331] hub 9-0:1.0: USB hub found [ 1.824341] hub 9-0:1.0: 5 ports detected [ 1.824706] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.824712] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 1.824732] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 1.874790] ata3.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 1.874795] ata3.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 1.874802] ata3.01: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 1.874805] ata3.00: limited to UDMA/33 due to 40-wire cable [ 1.874806] ata3.01: limited to UDMA/33 due to 40-wire cable [ 1.884074] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.884079] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.884082] usb usb10: Product: OHCI PCI host controller [ 1.884083] usb usb10: Manufacturer: Linux 6.12.38+deb13-amd64 ohci_hcd [ 1.884085] usb usb10: SerialNumber: ... [ 1.884369] hub 10-0:1.0: USB hub found [ 1.884380] hub 10-0:1.0: 2 ports detected [ 1.884667] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.884674] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 1.884705] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 1.927999] usb 2-2: new high-speed USB device number 2 using ehci-pci [ 1.944040] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.944045] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.944048] usb usb11: Product: OHCI PCI host controller [ 1.944049] usb usb11: Manufacturer: Linux 6.12.38+deb13-amd64 ohci_hcd [ 1.944051] usb usb11: SerialNumber: ... [ 1.944337] hub 11-0:1.0: USB hub found [ 1.944349] hub 11-0:1.0: 4 ports detected [ 2.028440] scsi 1:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.032838] scsi 1:0:1:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 2.072831] usb 2-2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 2.072836] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.072839] usb 2-2: Product: 802.11n NIC [ 2.072841] usb 2-2: Manufacturer: Realtek [ 2.072843] usb 2-2: SerialNumber: ... [ 2.079968] usb 9-2: new low-speed USB device number 2 using ohci-pci [ 2.102103] ahci 0000:00:11.0: version 3.0 [ 2.102363] ahci 0000:00:11.0: AHCI vers 0001.0200, 32 command slots, 6 Gbps, SATA mode [ 2.102368] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 2.102371] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part [ 2.103206] scsi host4: ahci [ 2.103753] scsi host5: ahci [ 2.104199] scsi host6: ahci [ 2.104436] scsi host7: ahci [ 2.104524] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 lpm-pol 3 [ 2.104529] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 lpm-pol 3 [ 2.104532] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 lpm-pol 3 [ 2.104535] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 lpm-pol 3 [ 2.104814] ahci 0000:02:00.0: AHCI vers 0001.0000, 32 command slots, 6 Gbps, SATA mode [ 2.104820] ahci 0000:02:00.0: 2/2 ports implemented (port mask 0x3) [ 2.104823] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.105322] scsi host8: ahci [ 2.105545] scsi host9: ahci [ 2.105632] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 lpm-pol 0 [ 2.105635] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 lpm-pol 0 [ 2.113332] sd 1:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.113351] sd 1:0:0:0: [sda] Write Protect is off [ 2.113355] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.113382] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.113427] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.128485] sda: sda1 sda2 sda3 sda4 [ 2.128741] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.184315] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.216003] usb 6-1: new full-speed USB device number 2 using ohci-pci [ 2.395119] usb 6-1: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 2.395131] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.395138] usb 6-1: Product: USB Device [ 2.395143] usb 6-1: Manufacturer: COMPANY [ 2.415864] ata5: SATA link down (SStatus 0 SControl 300) [ 2.425685] hid: raw HID events driver (C) Jiri Kosina [ 2.572038] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 2.572040] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.572071] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.572080] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 330) [ 2.572102] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.572210] ata7.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 2.572259] ata7.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.572386] ata7.00: configured for UDMA/133 [ 2.572744] ata9.00: ATA-8: ST2000DL001-9VT156, CC98, max UDMA/133 [ 2.572748] ata9.00: 3907029168 sectors, multi 0: LBA48 [ 2.573024] ata10.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.573247] ata8.00: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.573269] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.573451] ata9.00: configured for UDMA/133 [ 2.574487] ata10.00: configured for UDMA/133 [ 2.574554] ata8.00: configured for UDMA/133 [ 2.664004] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 2.993848] ata6.00: ATA-8: TOSHIBA MK2555GSX, FG001J, max UDMA/100 [ 2.993928] ata6.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.994900] ata6.00: configured for UDMA/100 [ 2.995099] scsi 5:0:0:0: Direct-Access ATA TOSHIBA MK2555GS 1J PQ: 0 ANSI: 5 [ 2.995642] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 2.995646] scsi 6:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 2.995657] sd 5:0:0:0: [sdb] Write Protect is off [ 2.995660] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.995679] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.995715] sd 5:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 2.996142] sd 6:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.996160] sd 6:0:0:0: [sdc] Write Protect is off [ 2.996165] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.996192] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.996239] sd 6:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 2.996989] scsi 7:0:0:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 3.024949] usb 1-3: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 3.024967] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.024973] usb 1-3: SerialNumber: ... [ 3.044004] usb 6-2: new full-speed USB device number 3 using ohci-pci [ 3.047179] sdc: sdc1 sdc2 [ 3.047483] sd 6:0:0:0: [sdc] Attached SCSI disk [ 3.068709] scsi 8:0:0:0: Direct-Access ATA ST2000DL001-9VT1 CC98 PQ: 0 ANSI: 5 [ 3.069127] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.069132] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 3.069148] sd 8:0:0:0: [sdd] Write Protect is off [ 3.069152] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.069179] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.069210] scsi 9:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.069223] sd 8:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 3.069674] sd 9:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.069679] sd 9:0:0:0: [sde] 4096-byte physical blocks [ 3.069695] sd 9:0:0:0: [sde] Write Protect is off [ 3.069698] sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.069719] sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.069753] sd 9:0:0:0: [sde] Preferred minimum I/O size 4096 bytes [ 3.092303] sdb: sdb1 sdb2 [ 3.092451] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3.118256] sde: sde1 sde2 [ 3.118560] sd 9:0:0:0: [sde] Attached SCSI disk [ 3.128928] sdd: sdd1 [ 3.129140] sd 8:0:0:0: [sdd] Attached SCSI disk [ 3.151286] usbcore: registered new interface driver usbhid [ 3.151291] usbhid: USB HID core driver [ 3.155635] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:09DA:FAA8.0001/input/input2 [ 3.210206] sr 1:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.210213] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.233055] usb 6-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.233060] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.233062] usb 6-2: Product: A4Tech Gaming Mouse [ 3.233064] usb 6-2: Manufacturer: PixArt [ 3.239354] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:09DA:3519.0004/input/input3 [ 3.310271] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 3.360054] hid-generic 0003:09DA:FAA8.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input0 [ 3.360286] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.1/0003:09DA:FAA8.0002/input/input4 [ 3.360412] hid-generic 0003:09DA:3519.0004: input,hidraw1: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input0 [ 3.360464] hid-generic 0003:09DA:FAA8.0002: input,hidraw2: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-1/input1 [ 3.360882] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input5 [ 3.363584] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:09DA:3519.0005/input/input8 [ 3.370876] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.404723] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 3.416040] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input6 [ 3.472299] hid-generic 0003:09DA:3519.0005: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input1 [ 3.472388] hid-generic 0003:09DA:FAA8.0003: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input2 [ 3.640160] usb 9-2: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 3.640167] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.640170] usb 9-2: Product: NOVA AVR [ 3.640172] usb 9-2: Manufacturer: MGE UPS SYSTEMS [ 3.910357] usb 3-5: new high-speed USB device number 4 using ehci-pci [ 4.052280] usb 3-5: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 4.052287] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 4.052707] hub 3-5:1.0: USB hub found [ 4.052779] hub 3-5:1.0: 2 ports detected [ 7.671516] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:13.0-2/input0 [ 7.686266] [drm] amdgpu kernel modesetting enabled. [ 7.686394] amdgpu: Virtual CRAT table created for CPU [ 7.686412] amdgpu: Topology: Add CPU node [ 7.686726] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 7.686752] [drm] register mmio base: 0xFEA00000 [ 7.686754] [drm] register mmio size: 262144 [ 7.686833] [drm] add ip block number 0 <vi_common> [ 7.686835] [drm] add ip block number 1 <gmc_v8_0> [ 7.686836] [drm] add ip block number 2 <tonga_ih> [ 7.686838] [drm] add ip block number 3 <gfx_v8_0> [ 7.686839] [drm] add ip block number 4 <sdma_v3_0> [ 7.686840] [drm] add ip block number 5 <powerplay> [ 7.686842] [drm] add ip block number 6 <dm> [ 7.686843] [drm] add ip block number 7 <uvd_v6_0> [ 7.686844] [drm] add ip block number 8 <vce_v3_0> [ 7.687103] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 7.687107] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 7.687406] [drm] UVD is enabled in VM mode [ 7.687408] [drm] UVD ENC is enabled in VM mode [ 7.687409] [drm] VCE enabled in VM mode [ 7.687452] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 7.688522] Console: switching to colour dummy device 80x25 [ 7.688528] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 7.688531] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 7.688564] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 7.688847] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 7.688850] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 7.688856] [drm] Detected VRAM RAM=8192M, BAR=256M [ 7.688857] [drm] RAM width 256bits GDDR5 [ 7.689159] [drm] amdgpu: 8192M of VRAM memory ready [ 7.689162] [drm] amdgpu: 11997M of GTT memory ready. [ 7.689182] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 7.689556] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 7.690670] [drm] Chained IB support enabled! [ 7.695443] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 7.698357] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 7.700179] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 8.012338] [drm] Display Core v3.2.301 initialized on DCE 11.2 [ 8.074036] [drm] UVD and UVD ENC initialized successfully. [ 8.183967] [drm] VCE initialized successfully. [ 8.184959] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 8.184973] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 8.188745] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 8.189547] [drm] Initialized amdgpu 3.61.0 for 0000:01:00.0 on minor 0 [ 8.203538] fbcon: amdgpudrmfb (fb0) is primary device [ 8.290304] Console: switching to colour frame buffer device 160x64 [ 8.308169] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 8.491970] raid6: sse2x4 gen() 12271 MB/s [ 8.559967] raid6: sse2x2 gen() 11274 MB/s [ 8.627968] raid6: sse2x1 gen() 7897 MB/s [ 8.627970] raid6: using algorithm sse2x4 gen() 12271 MB/s [ 8.695968] raid6: .... xor() 4574 MB/s, rmw enabled [ 8.695970] raid6: using ssse3x2 recovery algorithm [ 8.698526] xor: automatically using best checksumming function avx [ 8.700604] async_tx: api initialized (async) [ 9.149798] Btrfs loaded, zoned=yes, fsverity=yes [ 22.932595] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 22.932654] floppy: error 10 while reading block 0 [ 23.315564] EXT4-fs (sda4): mounted filesystem HASH_568-82B8-100D-ADB6-3120FA883512 ro with ordered data mode. Quota mode: none. [ 23.430176] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 23.546026] systemd[1]: RTC configured in localtime, applying delta of 300 minutes to system time. [ 23.581268] systemd[1]: Inserted module 'autofs4' [ 23.614084] systemd[1]: systemd 257.7-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE) [ 23.614091] systemd[1]: Detected architecture x86-64. [ 23.617074] systemd[1]: Hostname set to ... [ 23.810381] systemd[1]: bpf-restrict-fs: LSM BPF program attached [ 23.927020] systemd-sysv-generator[438]: SysV service '/etc/init.d/pfclient' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 23.927027] systemd-sysv-generator[438]: Please update package to include a native systemd unit file. [ 23.927030] systemd-sysv-generator[438]: ! This compatibility logic is deprecated, expect removal soon. ! [ 23.927071] systemd-sysv-generator[438]: SysV service '/etc/init.d/cwdaemon' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 23.927074] systemd-sysv-generator[438]: Please update package to include a native systemd unit file. [ 23.927077] systemd-sysv-generator[438]: ! This compatibility logic is deprecated, expect removal soon. ! [ 24.093611] systemd[1]: /usr/lib/systemd/system/radioclk.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/radioclkd.pid \xe2\x86\x92 /run/radioclkd.pid; please update the unit file accordingly. [ 24.195912] random: crng init done [ 24.207632] systemd[1]: Queued start job for default target graphical.target. [ 24.246561] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 24.247227] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 24.247848] systemd[1]: Created slice system-nut\x2ddriver.slice - Slice /system/nut-driver. [ 24.248535] systemd[1]: Created slice system-tor.slice - Slice /system/tor. [ 24.249296] systemd[1]: Created slice system-xfs_scrub.slice - xfs_scrub background service slice. [ 24.249709] systemd[1]: Created slice user.slice - User and Session Slice. [ 24.249805] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 24.250083] systemd[1]: Set up automount ... [ 24.250134] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 24.250185] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 24.250224] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 24.250247] systemd[1]: Reached target slices.target - Slice Units. [ 24.250281] systemd[1]: Reached target swap.target - Swaps. [ 24.250317] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 24.250476] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 24.251888] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. [ 24.252047] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 24.252168] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 24.252293] systemd[1]: Listening on systemd-journald.socket - Journal Sockets. [ 24.252342] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 24.252370] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 24.252479] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 24.252551] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 24.254363] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 24.255388] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 24.256529] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock... [ 24.257567] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 24.258810] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 24.259350] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 24.260775] systemd[1]: Mounting tmp.mount - Temporary Directory /tmp... [ 24.263103] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 24.264811] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 24.266545] systemd[1]: Starting XXX@XXX - Load Kernel Module configfs... [ 24.268824] systemd[1]: Starting XXX@XXX - Load Kernel Module drm... [ 24.270223] systemd[1]: Starting XXX@XXX - Load Kernel Module efi_pstore... [ 24.271754] systemd[1]: Starting XXX@XXX - Load Kernel Module fuse... [ 24.272191] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 24.272260] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-HASH_2F3-D74F-2DCC-7F25-C1D296350508). [ 24.275146] systemd[1]: Starting systemd-journald.service - Journal Service... [ 24.278344] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 24.278385] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 24.280270] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 24.280372] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 24.282941] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... [ 24.284480] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 24.288139] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 24.288330] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 24.288518] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock. [ 24.288704] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 24.288883] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 24.289052] systemd[1]: Mounted tmp.mount - Temporary Directory /tmp. [ 24.289580] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 24.290113] systemd[1]: XXX@XXX: Deactivated successfully. [ 24.290383] systemd[1]: Finished XXX@XXX - Load Kernel Module drm. [ 24.290772] systemd[1]: XXX@XXX: Deactivated successfully. [ 24.291056] systemd[1]: Finished XXX@XXX - Load Kernel Module fuse. [ 24.292738] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 24.294381] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 24.294968] systemd[1]: XXX@XXX: Deactivated successfully. [ 24.295333] systemd[1]: Finished XXX@XXX - Load Kernel Module configfs. [ 24.296787] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 24.299342] systemd[1]: XXX@XXX: Deactivated successfully. [ 24.299655] systemd[1]: Finished XXX@XXX - Load Kernel Module efi_pstore. [ 24.308356] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 24.310048] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 24.313995] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials. [ 24.322050] EXT4-fs (sda4): re-mounted HASH_568-82B8-100D-ADB6-3120FA883512 r/w. [ 24.323405] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 24.324612] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 24.324685] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 24.326255] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 24.326288] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 24.327841] systemd-journald[459]: Collecting audit messages is disabled. [ 24.338221] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 24.338263] device-mapper: uevent: version 1.0.3 [ 24.338404] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 24.342944] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 24.343143] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. [ 24.344679] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 24.355321] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed. [ 24.360606] loop: module loaded [ 24.370697] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. [ 24.372664] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... [ 24.381826] lp: driver loaded but no devices found [ 24.388350] ppdev: user-space parallel port driver [ 24.396096] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 24.396231] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. [ 24.396261] systemd[1]: Reached target local-fs.target - Local File Systems. [ 24.397929] systemd[1]: Listening on systemd-sysext.socket - System Extension Image Management. [ 24.399298] systemd[1]: Starting apparmor.service - Load AppArmor profiles... [ 24.400790] systemd[1]: Starting console-setup.service - Set console font and keymap... [ 24.402434] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... [ 24.404550] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... [ 24.420859] systemd[1]: Finished console-setup.service - Set console font and keymap. [ 24.422282] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 492 (systemd-binfmt) [ 24.423307] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 24.425047] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 24.428327] systemd[1]: Received SIGRTMIN+20 from PID 375 (plymouthd). [ 24.430099] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. [ 24.454480] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ 24.546753] systemd[1]: Started systemd-journald.service - Journal Service. [ 24.590046] systemd-journald[459]: Received client request to flush runtime journal. [ 24.858389] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 24.858452] sr 1:0:1:0: Attached scsi generic sg1 type 5 [ 24.858550] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 24.858594] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 24.858646] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 24.858699] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 24.858845] sd 9:0:0:0: Attached scsi generic sg6 type 0 [ 25.346584] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 25.351496] at24 0-0050: supply vcc not found, using dummy regulator [ 25.351835] acpi_cpufreq: overriding BIOS provided _PSD data [ 25.354800] at24 0-0050: 256 byte spd EEPROM, read-only [ 25.354854] at24 0-0051: supply vcc not found, using dummy regulator [ 25.355428] cryptd: max_cpu_qlen set to 1000 [ 25.359392] at24 0-0051: 256 byte spd EEPROM, read-only [ 25.359434] at24 0-0052: supply vcc not found, using dummy regulator [ 25.362198] at24 0-0052: 256 byte spd EEPROM, read-only [ 25.362324] at24 0-0053: supply vcc not found, using dummy regulator [ 25.365448] at24 0-0053: 256 byte spd EEPROM, read-only [ 25.396009] mc: Linux media interface: v0.10 [ 25.399169] AES CTR mode by8 optimization enabled [ 25.550666] videodev: Linux video capture interface: v2.00 [ 25.619707] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 25.620016] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 25.620025] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] [ 25.620051] saa7134: saa7133[0]: board init: gpio is 40000 [ 25.641764] usb 1-3: Found UVC 1.00 device <unnamed> (046d:0825) [ 25.760065] usbcore: registered new interface driver uvcvideo [ 25.822012] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 25.822354] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 25.822675] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 25.823020] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 25.823363] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 25.842019] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 25.855913] Registered IR keymap rc-avermedia-m135a [ 25.863531] IR NEC protocol handler initialized [ 25.865844] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 25.882990] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11 [ 25.883113] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12 [ 25.883230] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13 [ 25.883331] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14 [ 25.883416] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15 [ 25.883499] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16 [ 25.888437] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 25.890046] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 25.893225] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 25.895278] kvm_amd: TSC scaling supported [ 25.895281] kvm_amd: Nested Virtualization enabled [ 25.895283] kvm_amd: Nested Paging enabled [ 25.895285] kvm_amd: LBR virtualization supported [ 25.910698] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 25.910704] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 25.910707] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 25.910709] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 25.910711] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 25.910713] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 25.910716] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 25.910718] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 25.910720] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 25.928542] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input17 [ 25.928685] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input18 [ 25.928774] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input19 [ 25.928862] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input20 [ 25.928961] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input21 [ 25.929048] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input22 [ 25.929131] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input23 [ 25.930706] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input24 [ 25.946598] MCE: In-kernel MCE decoding enabled. [ 26.043910] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 26.043918] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 26.043921] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 26.043923] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.043925] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 26.043927] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.043929] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.043931] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.043933] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.043935] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.043937] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.043939] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.043941] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.043943] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.043945] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.043947] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.148001] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 26.232001] tda829x 13-004b: setting tuner address to 60 [ 26.275932] usb 2-2: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 26.275940] usb 2-2: RTL8188EU MAC: XXX [ 26.275943] usb 2-2: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 26.277193] usb 2-2: Firmware revision 28.0 (signature 0x88e1) [ 26.311976] tda829x 13-004b: type set to tda8290+75a [ 26.848432] usbcore: registered new interface driver rtl8xxxu [ 26.858600] rtl8xxxu 2-2:1.0 wlxd037459855f3: renamed from wlan0 [ 27.203948] usb 1-3: set resolution quirk: cval->res = 384 [ 27.205122] usbcore: registered new interface driver snd-usb-audio [ 30.024791] saa7134: saa7133[0]: registered device video2 [v4l2] [ 30.024915] saa7134: saa7133[0]: registered device vbi0 [ 30.025030] saa7134: saa7133[0]: registered device radio0 [ 30.050888] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 30.050942] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 34.372275] Process accounting resumed [ 34.578948] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 35.023933] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 35.357328] NET: Registered PF_QIPCRTR protocol family [ 37.427862] tg3 0000:06:00.0 enp6s0: Link is up at 100 Mbps, full duplex [ 37.427869] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 37.427872] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 37.432312] wlxd037459855f3: No basic rates, using min rate instead [ 37.432322] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 37.437773] wlxd037459855f3: authenticate with XXX (local address=XXX) [ 37.437784] wlxd037459855f3: send auth to XXX (try 1/3) [ 37.440765] wlxd037459855f3: authenticated [ 37.444007] wlxd037459855f3: associate with XXX (try 1/3) [ 37.450013] wlxd037459855f3: RX AssocResp from XXX (capab=0x1c11 status=0 aid=7) [ 37.450018] wlxd037459855f3: No basic rates, using min rate instead [ 37.452021] usb 2-2: rtl8xxxu_bss_info_changed: HT supported [ 37.454251] wlxd037459855f3: associated [ 37.532149] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by XXX [ 41.064306] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 51.380522] systemd-journald[459]: Time jumped backwards, rotating. [ 53.977423] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 66.890548] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 73.823000] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 81.683608] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 278.623661] wlxd037459855f3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 279.123568] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 279.128802] wlxd037459855f3: authenticate with XXX (local address=XXX) [ 279.128811] wlxd037459855f3: send auth to XXX (try 1/3) [ 279.132024] wlxd037459855f3: authenticated [ 279.133820] wlxd037459855f3: associate with XXX (try 1/3) [ 279.137946] wlxd037459855f3: RX AssocResp from XXX (capab=0x411 status=0 aid=1) [ 279.139789] usb 2-2: rtl8xxxu_bss_info_changed: HT supported [ 279.142100] wlxd037459855f3: associated [ 334.497556] Process accounting resumed [ 530.768463] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 530.773791] wlxd037459855f3: authenticate with XXX (local address=XXX) [ 530.773800] wlxd037459855f3: send auth to XXX (try 1/3) [ 530.974725] wlxd037459855f3: send auth to XXX (try 2/3) [ 531.178734] wlxd037459855f3: send auth to XXX (try 3/3) [ 531.181211] wlxd037459855f3: authenticated [ 531.182738] wlxd037459855f3: associate with XXX (try 1/3) [ 531.386781] wlxd037459855f3: associate with XXX (try 2/3) [ 531.594718] wlxd037459855f3: associate with XXX (try 3/3) [ 531.802669] wlxd037459855f3: association with XXX timed out [ 546.660402] wlxd037459855f3: No basic rates, using min rate instead [ 546.660424] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 546.665751] wlxd037459855f3: authenticate with XXX (local address=XXX) [ 546.665760] wlxd037459855f3: send auth to XXX (try 1/3) [ 546.667768] wlxd037459855f3: authenticated [ 546.674468] wlxd037459855f3: associate with XXX (try 1/3) [ 546.680004] wlxd037459855f3: RX AssocResp from XXX (capab=0x1c11 status=0 aid=7) [ 546.680020] wlxd037459855f3: No basic rates, using min rate instead [ 546.681734] usb 2-2: rtl8xxxu_bss_info_changed: HT supported [ 546.684001] wlxd037459855f3: associated [ 546.780037] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by XXX [ 677.360620] wlxd037459855f3: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 677.861056] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 677.866366] wlxd037459855f3: authenticate with XXX (local address=XXX) [ 677.866374] wlxd037459855f3: send auth to XXX (try 1/3) [ 677.869524] wlxd037459855f3: authenticated [ 677.875649] wlxd037459855f3: associate with XXX (try 1/3) [ 677.879120] wlxd037459855f3: RX AssocResp from XXX (capab=0x411 status=0 aid=1) [ 677.880852] usb 2-2: rtl8xxxu_bss_info_changed: HT supported [ 677.883110] wlxd037459855f3: associated [ 736.160881] Non-volatile memory driver v1.3 [ 741.457405] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 748.549550] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 748.549569] floppy: error 10 while reading block 0 [ 762.422957] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 762.422976] floppy: error 10 while reading block 0