[ 0.000000] microcode: microcode updated early to revision 0x11, date = 2018-05-08 [ 0.000000] Linux version 5.7.11-200.fc32.x86_64 (XXX@XXX) (gcc version 10.1.1 20200507 (Red Hat 10.1.1-1) (GCC), GNU ld version 2.34-4.fc32) #1 SMP Wed Jul 29 17:15:52 UTC 2020 [ 0.000000] Command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.7.11-200.fc32.x86_64 root=/dev/mapper/XXXXXXXXXXXXXXXXXXXXXXXXXXX ro resume=/dev/mapper/XXXXXXXXXXXXXXXXXXXXXXXXXXX rd.lvm.lv=... rd.lvm.lv=... rhgb quiet [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000af674fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af675000-0x00000000af6befff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000af6bf000-0x00000000af74bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af74c000-0x00000000af7befff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7e2fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af7e3000-0x00000000af7fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000bbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Acer Aspire 4820T/ZQ1B, BIOS V1.19 09/08/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2127.834 MHz processor [ 0.002943] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002945] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002953] last_pfn = 0xaf800 max_arch_pfn = 0x400000000 [ 0.002958] MTRR default type: uncachable [ 0.002959] MTRR fixed ranges enabled: [ 0.002960] 00000-9FFFF write-back [ 0.002961] A0000-BFFFF uncachable [ 0.002962] C0000-EFFFF write-through [ 0.002963] F0000-FFFFF write-combining [ 0.002964] MTRR variable ranges enabled: [ 0.002966] 0 base 000000000 mask F80000000 write-back [ 0.002967] 1 base 0FFE00000 mask FFFE00000 write-protect [ 0.002968] 2 base 080000000 mask FC0000000 write-back [ 0.002969] 3 base 0B0000000 mask FF0000000 uncachable [ 0.002970] 4 base 0AF800000 mask FFF800000 uncachable [ 0.002971] 5 disabled [ 0.002971] 6 disabled [ 0.002972] 7 disabled [ 0.003656] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.018939] RAMDISK: [mem 0x33f03000-0x35f79fff] [ 0.018946] ACPI: Early table checksum verification disabled [ 0.018951] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.018956] ACPI: XSDT 0x00000000AF7FE120 000074 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.018963] ACPI: FACP 0x00000000AF7FC000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018969] ACPI: DSDT 0x00000000AF7ED000 00BE53 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018973] ACPI: FACS 0x00000000AF75F000 000040 [ 0.018976] ACPI: FACS 0x00000000AF75F000 000040 [ 0.018979] ACPI: ASF! 0x00000000AF7FD000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018983] ACPI: HPET 0x00000000AF7FB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018987] ACPI: APIC 0x00000000AF7FA000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018991] ACPI: MCFG 0x00000000AF7F9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018995] ACPI: SLIC 0x00000000AF7EC000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.018999] ACPI: BOOT 0x00000000AF7E9000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.019002] ACPI: ASPT 0x00000000AF7E5000 000034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.019006] ACPI: WDAT 0x00000000AF7E4000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.019010] ACPI: SSDT 0x00000000AF7E3000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.019021] ACPI: Local APIC address 0xfee00000 [ 0.019094] No NUMA configuration found [ 0.019096] Faking a node at [mem 0x0000000000000000-0x00000000af7fffff] [ 0.019110] NODE_DATA(0) allocated [mem 0xaf721000-0xaf74bfff] [ 0.034261] Zone ranges: [ 0.034264] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.034266] DMA32 [mem 0x0000000001000000-0x00000000af7fffff] [ 0.034267] Normal empty [ 0.034268] Device empty [ 0.034269] Movable zone start for each node [ 0.034273] Early memory node ranges [ 0.034274] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.034275] node 0: [mem 0x0000000000100000-0x00000000af674fff] [ 0.034277] node 0: [mem 0x00000000af6bf000-0x00000000af74bfff] [ 0.034278] node 0: [mem 0x00000000af7bf000-0x00000000af7e2fff] [ 0.034278] node 0: [mem 0x00000000af7ff000-0x00000000af7fffff] [ 0.034327] Zeroed struct page in unavailable ranges: 2365 pages [ 0.034329] Initmem setup node 0 [mem 0x0000000000001000-0x00000000af7fffff] [ 0.034330] On node 0 totalpages: 718531 [ 0.034332] DMA zone: 64 pages used for memmap [ 0.034333] DMA zone: 21 pages reserved [ 0.034334] DMA zone: 3996 pages, LIFO batch:0 [ 0.034437] DMA32 zone: 11168 pages used for memmap [ 0.034438] DMA32 zone: 714535 pages, LIFO batch:63 [ 0.051955] Reserving Intel graphics memory at [mem 0xb4000000-0xbbffffff] [ 0.052131] ACPI: PM-Timer IO Port: 0x408 [ 0.052134] ACPI: Local APIC address 0xfee00000 [ 0.052156] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.052159] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.052161] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.052163] ACPI: IRQ0 used by override. [ 0.052164] ACPI: IRQ9 used by override. [ 0.052167] Using ACPI (MADT) for SMP configuration information [ 0.052169] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.052176] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.052205] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.052207] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.052207] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.052208] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.052210] PM: hibernation: Registered nosave memory: [mem 0xaf675000-0xaf6befff] [ 0.052212] PM: hibernation: Registered nosave memory: [mem 0xaf74c000-0xaf7befff] [ 0.052214] PM: hibernation: Registered nosave memory: [mem 0xaf7e3000-0xaf7fefff] [ 0.052216] [mem 0xbc000000-0xefffffff] available for PCI devices [ 0.052218] Booting paravirtualized kernel on bare hardware [ 0.052221] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.059481] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.059922] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 [ 0.059933] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 [ 0.059935] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.059978] Built 1 zonelists, mobility grouping on. Total pages: 707278 [ 0.059979] Policy zone: DMA32 [ 0.059981] Kernel command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.7.11-200.fc32.x86_64 root=/dev/mapper/XXXXXXXXXXXXXXXXXXXXXXXXXXX ro resume=/dev/mapper/XXXXXXXXXXXXXXXXXXXXXXXXXXX rd.lvm.lv=... rd.lvm.lv=... rhgb quiet [ 0.060823] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.061163] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.061287] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.080174] Memory: 2748640K/2874124K available (14339K kernel code, 2406K rwdata, 8164K rodata, 2468K init, 5072K bss, 125484K reserved, 0K cma-reserved) [ 0.080185] random: get_random_u64 called from __kmem_cache_create+0x3e/0x610 with crng_init=0 [ 0.080393] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.080412] Kernel/User page tables isolation: enabled [ 0.080442] ftrace: allocating 41361 entries in 162 pages [ 0.103432] ftrace: allocated 162 pages with 3 groups [ 0.103593] rcu: Hierarchical RCU implementation. [ 0.103595] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.103596] Tasks RCU enabled. [ 0.103597] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.103598] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.109292] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.111988] Console: colour VGA+ 80x25 [ 0.111993] printk: console [tty0] enabled [ 0.112015] ACPI: Core revision 20200326 [ 0.112161] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.112180] APIC: Switch to symmetric I/O mode setup [ 0.112786] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.117181] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1eabe66febd, max_idle_ns: 440795309647 ns [ 0.117186] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.66 BogoMIPS (lpj=2127834) [ 0.117188] pid_max: default: 32768 minimum: 301 [ 0.117228] LSM: Security Framework initializing [ 0.117244] Yama: becoming mindful. [ 0.117255] SELinux: Initializing. [ 0.117315] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.117329] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.117690] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.117701] process: using mwait in idle threads [ 0.117705] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.117706] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.117710] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.117712] Spectre V2 : Mitigation: Full generic retpoline [ 0.117713] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.117713] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.117715] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.117716] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.117718] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.117720] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.117995] Freeing SMP alternatives memory: 36K [ 0.223787] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz (family: 0x6, model: 0x25, stepping: 0x2) [ 0.223943] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver. [ 0.223951] core: CPUID marked event: 'bus cycles' unavailable [ 0.223952] ... version: 3 [ 0.223953] ... bit width: 48 [ 0.223953] ... generic registers: 4 [ 0.223954] ... value mask: 0000ffffffffffff [ 0.223955] ... max period: 000000007fffffff [ 0.223956] ... fixed-purpose events: 3 [ 0.223956] ... event mask: 000000070000000f [ 0.224009] rcu: Hierarchical SRCU implementation. [ 0.224617] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.224743] smp: Bringing up secondary CPUs ... [ 0.224889] x86: Booting SMP configuration: [ 0.224890] .... node #0, CPUs: #1 [ 0.226328] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.226378] #2 #3 [ 0.230216] smp: Brought up 1 node, 4 CPUs [ 0.230217] smpboot: Max logical packages: 2 [ 0.230220] smpboot: Total of 4 processors activated (17022.67 BogoMIPS) [ 0.231492] devtmpfs: initialized [ 0.231492] x86/mm: Memory block size: 128MB [ 0.232418] PM: Registering ACPI NVS region [mem 0xaf74c000-0xaf7befff] (471040 bytes) [ 0.232418] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.232418] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.232418] pinctrl core: initialized pinctrl subsystem [ 0.232434] PM: RTC time: 20:46:52, date: 2020-08-06 [ 0.232437] thermal_sys: Registered thermal governor 'fair_share' [ 0.232438] thermal_sys: Registered thermal governor 'bang_bang' [ 0.232438] thermal_sys: Registered thermal governor 'step_wise' [ 0.232439] thermal_sys: Registered thermal governor 'user_space' [ 0.232610] NET: Registered protocol family 16 [ 0.233335] cpuidle: using governor menu [ 0.233335] Simple Boot Flag at 0x44 set to 0x1 [ 0.233335] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.233335] ACPI: bus type PCI registered [ 0.233335] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.233375] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.233394] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.233406] PCI: Using configuration type 1 for base access [ 0.235996] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.479406] cryptd: max_cpu_qlen set to 1000 [ 0.481425] alg: No test for 842 (842-generic) [ 0.481425] alg: No test for 842 (842-scomp) [ 0.485485] ACPI: Added _OSI(Module Device) [ 0.485485] ACPI: Added _OSI(Processor Device) [ 0.485485] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.485485] ACPI: Added _OSI(Processor Aggregator Device) [ 0.485485] ACPI: Added _OSI(Linux-Dell-Video) [ 0.485485] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.485485] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.498233] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.499540] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.500102] ACPI: Dynamic OEM Table Load: [ 0.500109] ACPI: SSDT 0xFFFF92866B0FCC00 0003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.501010] ACPI: Dynamic OEM Table Load: [ 0.501016] ACPI: SSDT 0xFFFF92866BC62000 0008E0 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.502239] ACPI: Dynamic OEM Table Load: [ 0.502244] ACPI: SSDT 0xFFFF92866B0FB400 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.502999] ACPI: Dynamic OEM Table Load: [ 0.503004] ACPI: SSDT 0xFFFF92866B616A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.504338] ACPI: EC: EC started [ 0.504339] ACPI: EC: interrupt blocked [ 0.504440] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.504443] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.504443] ACPI: Interpreter enabled [ 0.504483] ACPI: (supports S0 S3 S4 S5) [ 0.504485] ACPI: Using IOAPIC for interrupt routing [ 0.504525] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.504736] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM [ 0.504757] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.511059] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.511065] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.511109] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.511708] PCI host bridge to bus 0000:00 [ 0.511711] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.511712] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.511714] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.511715] pci_bus 0000:00: root bus resource [mem 0xbc000000-0xfeafffff window] [ 0.511717] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.511728] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000 [ 0.511754] pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 0.511849] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000 [ 0.511862] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.511868] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.511872] pci 0000:00:02.0: reg 0x20: [io 0x3050-0x3057] [ 0.512028] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.512063] pci 0000:00:16.0: reg 0x10: [mem 0xd4406100-0xd440610f 64bit] [ 0.512159] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.512282] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.513092] pci 0000:00:1a.0: reg 0x10: [mem 0xd4405c00-0xd4405fff] [ 0.515438] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.515572] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.515605] pci 0000:00:1b.0: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit] [ 0.515723] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.515858] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.515987] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.516237] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400 [ 0.516366] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.516485] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.517187] pci 0000:00:1d.0: reg 0x10: [mem 0xd4405800-0xd4405bff] [ 0.519634] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.519761] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.519954] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100 [ 0.520287] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601 [ 0.520316] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.520326] pci 0000:00:1f.2: reg 0x14: [io 0x305c-0x305f] [ 0.520338] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.520348] pci 0000:00:1f.2: reg 0x1c: [io 0x3058-0x305b] [ 0.520359] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.520370] pci 0000:00:1f.2: reg 0x24: [mem 0xd4405000-0xd44057ff] [ 0.520433] pci 0000:00:1f.2: PME# supported from D3hot [ 0.520554] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.520582] pci 0000:00:1f.3: reg 0x10: [mem 0xd4406000-0xd44060ff 64bit] [ 0.520612] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.520750] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000 [ 0.520782] pci 0000:00:1f.6: reg 0x10: [mem 0xd4404000-0xd4404fff 64bit] [ 0.521030] pci 0000:01:00.0: [1969:1073] type 00 class 0x020000 [ 0.521075] pci 0000:01:00.0: reg 0x10: [mem 0xd3400000-0xd343ffff 64bit] [ 0.521092] pci 0000:01:00.0: reg 0x18: [io 0x2000-0x207f] [ 0.521246] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.521416] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.521420] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.521425] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff] [ 0.521432] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.521502] pci 0000:02:00.0: [168c:002a] type 00 class 0x028000 [ 0.521543] pci 0000:02:00.0: reg 0x10: [mem 0xd2400000-0xd240ffff 64bit] [ 0.521691] pci 0000:02:00.0: supports D1 [ 0.521692] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.521826] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.521831] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] [ 0.521835] pci 0000:00:1c.5: bridge window [mem 0xd2400000-0xd33fffff] [ 0.521842] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.521868] pci_bus 0000:03: extended config space not accessible [ 0.521928] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.521941] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.521942] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.521944] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.521945] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xfeafffff window] (subtractive decode) [ 0.522655] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.522717] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.522776] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.522836] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.522896] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.522955] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.523014] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.523073] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.523125] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f]) [ 0.523129] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.523223] PCI host bridge to bus 0000:7f [ 0.523225] pci_bus 0000:7f: root bus resource [bus 7f] [ 0.523232] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000 [ 0.523289] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000 [ 0.523366] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000 [ 0.523417] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000 [ 0.523467] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000 [ 0.523520] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000 [ 0.523724] ACPI: EC: interrupt unblocked [ 0.523725] ACPI: EC: event unblocked [ 0.523731] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.523732] ACPI: EC: GPE=0x16 [ 0.523734] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.523735] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 0.523829] iommu: Default domain type: Translated [ 0.523829] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.523829] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.523829] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.523829] vgaarb: loaded [ 0.523829] SCSI subsystem initialized [ 0.523829] libata version 3.00 loaded. [ 0.523829] ACPI: bus type USB registered [ 0.523829] usbcore: registered new interface driver usbfs [ 0.524191] usbcore: registered new interface driver hub [ 0.524217] usbcore: registered new device driver usb [ 0.524253] pps_core: LinuxPPS API ver. 1 registered [ 0.524253] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.524256] PTP clock support registered [ 0.524277] EDAC MC: Ver: 3.0.0 [ 0.524291] PCI: Using ACPI for IRQ routing [ 0.529453] PCI: pci_cache_line_size set to 64 bytes [ 0.529510] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.529512] e820: reserve RAM buffer [mem 0xaf675000-0xafffffff] [ 0.529513] e820: reserve RAM buffer [mem 0xaf74c000-0xafffffff] [ 0.529514] e820: reserve RAM buffer [mem 0xaf7e3000-0xafffffff] [ 0.529515] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff] [ 0.529671] NetLabel: Initializing [ 0.529672] NetLabel: domain hash size = 128 [ 0.529673] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.529692] NetLabel: unlabeled traffic allowed by default [ 0.529697] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.529697] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.531208] clocksource: Switched to clocksource tsc-early [ 0.554282] VFS: Disk quotas dquot_6.6.0 [ 0.554308] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.554395] pnp: PnP ACPI init [ 0.554631] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 13 [io 0x1000-0x1fff] [ 0.554690] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.554692] system 00:00: [io 0x0800-0x080f] has been reserved [ 0.554694] system 00:00: [io 0xffff] has been reserved [ 0.554695] system 00:00: [io 0xffff] has been reserved [ 0.554697] system 00:00: [io 0x0400-0x047f] has been reserved [ 0.554698] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.554707] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.554739] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.554765] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.554790] pnp 00:03: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active) [ 0.555136] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.555138] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.555140] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.555141] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.555143] system 00:04: [mem 0xf0000000-0xf1ffffff] has been reserved [ 0.555145] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.555146] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.555148] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.555150] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.555152] system 00:04: [mem 0xbc000000-0xbc000fff] has been reserved [ 0.555157] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.555294] pnp: PnP ACPI: found 5 devices [ 0.561560] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.561646] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.561651] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.561658] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff] [ 0.561662] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.561670] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.561673] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] [ 0.561679] pci 0000:00:1c.5: bridge window [mem 0xd2400000-0xd33fffff] [ 0.561683] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.561691] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.561705] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.561707] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.561708] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.561709] pci_bus 0000:00: resource 7 [mem 0xbc000000-0xfeafffff window] [ 0.561711] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.561712] pci_bus 0000:01: resource 1 [mem 0xd3400000-0xd43fffff] [ 0.561713] pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.561715] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.561716] pci_bus 0000:02: resource 1 [mem 0xd2400000-0xd33fffff] [ 0.561717] pci_bus 0000:02: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.561719] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.561720] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.561722] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.561723] pci_bus 0000:03: resource 7 [mem 0xbc000000-0xfeafffff window] [ 0.561834] NET: Registered protocol family 2 [ 0.562065] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.562086] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.562189] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.562372] TCP: Hash tables configured (established 32768 bind 32768) [ 0.562536] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.562571] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.562659] NET: Registered protocol family 1 [ 0.562665] NET: Registered protocol family 44 [ 0.562695] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.575021] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x669 took 12022 usecs [ 0.587010] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x669 took 11688 usecs [ 0.587032] pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 0.587053] PCI: CLS 64 bytes, default 64 [ 0.587111] Trying to unpack rootfs image as initramfs... [ 1.266867] Freeing initrd memory: 33244K [ 1.267940] Initialise system trusted keyrings [ 1.267952] Key type blacklist registered [ 1.268037] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.269962] zbud: loaded [ 1.270613] integrity: Platform Keyring initialized [ 1.275266] NET: Registered protocol family 38 [ 1.275269] Key type asymmetric registered [ 1.275270] Asymmetric key parser 'x509' registered [ 1.275280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.275342] io scheduler mq-deadline registered [ 1.275343] io scheduler kyber registered [ 1.275381] io scheduler bfq registered [ 1.275453] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 1.276113] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.276137] intel_idle: MWAIT substates: 0x1120 [ 1.276138] intel_idle: v0.5.1 model 0x25 [ 1.276430] intel_idle: Local APIC timer is reliable in all C-states [ 1.695483] ACPI: AC Adapter [ACAD] (on-line) [ 1.695555] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0 [ 1.695580] ACPI: Power Button [PWRB] [ 1.695619] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input1 [ 1.695639] ACPI: Lid Switch [LID0] [ 1.695674] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0E:00/input/input2 [ 1.695692] ACPI: Sleep Button [SLPB] [ 1.695729] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.695776] ACPI: Power Button [PWRF] [ 1.696795] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.696797] ACPI: Thermal Zone [THRM] (41 C) [ 1.697141] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.697929] battery: [Firmware Bug]: battery: (dis)charge rate invalid. [ 1.698062] battery: ACPI: Battery Slot [BAT1] (battery present) [ 1.700232] Non-volatile memory driver v1.3 [ 1.700269] Linux agpgart interface v0.103 [ 1.701069] ahci 0000:00:1f.2: version 3.0 [ 1.701274] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.701310] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.701314] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 1.704876] scsi host0: ahci [ 1.705157] scsi host1: ahci [ 1.705325] scsi host2: ahci [ 1.705452] scsi host3: ahci [ 1.705509] ata1: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405100 irq 26 [ 1.705511] ata2: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405180 irq 26 [ 1.705512] ata3: DUMMY [ 1.705513] ata4: DUMMY [ 1.705704] libphy: Fixed MDIO Bus: probed [ 1.705812] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.705815] ehci-pci: EHCI PCI platform driver [ 1.705976] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.706022] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.706038] ehci-pci 0000:00:1a.0: debug port 2 [ 1.709963] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.709983] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4405c00 [ 1.716284] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.716377] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 1.716380] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.716382] usb usb1: Product: EHCI Host Controller [ 1.716384] usb usb1: Manufacturer: Linux 5.7.11-200.fc32.x86_64 ehci_hcd [ 1.716386] usb usb1: SerialNumber: ... [ 1.716726] hub 1-0:1.0: USB hub found [ 1.716743] hub 1-0:1.0: 3 ports detected [ 1.717041] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.717131] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.717148] ehci-pci 0000:00:1d.0: debug port 2 [ 1.721087] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.721101] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4405800 [ 1.727298] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.727425] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 1.727427] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.727428] usb usb2: Product: EHCI Host Controller [ 1.727430] usb usb2: Manufacturer: Linux 5.7.11-200.fc32.x86_64 ehci_hcd [ 1.727431] usb usb2: SerialNumber: ... [ 1.727724] hub 2-0:1.0: USB hub found [ 1.727740] hub 2-0:1.0: 3 ports detected [ 1.727911] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.727915] ohci-pci: OHCI PCI platform driver [ 1.727926] uhci_hcd: USB Universal Host Controller Interface driver [ 1.727979] usbcore: registered new interface driver usbserial_generic [ 1.727984] usbserial: USB Serial support registered for generic [ 1.728019] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.734594] i8042: Detected active multiplexing controller, rev 1.1 [ 1.738220] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.738225] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.738260] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.738285] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.738309] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.738604] mousedev: PS/2 mouse device common for all mice [ 1.739770] rtc_cmos 00:01: RTC can wake from S4 [ 1.740231] rtc_cmos 00:01: registered as rtc0 [ 1.740275] rtc_cmos 00:01: setting system clock to 2020-08-06T20:46:54 UTC (1596746814) [ 1.740277] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 1.740341] device-mapper: uevent: version 1.0.3 [ 1.740492] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: XXX@XXX [ 1.740636] intel_pstate: CPU model not supported [ 1.740862] hid: raw HID events driver (C) Jiri Kosina [ 1.740904] usbcore: registered new interface driver usbhid [ 1.740904] usbhid: USB HID core driver [ 1.740997] drop_monitor: Initializing network drop monitor service [ 1.741090] Initializing XFRM netlink socket [ 1.741253] NET: Registered protocol family 10 [ 1.747272] Segment Routing with IPv6 [ 1.747274] RPL Segment Routing with IPv6 [ 1.747312] mip6: Mobile IPv6 [ 1.747315] NET: Registered protocol family 17 [ 1.748269] RAS: Correctable Errors collector initialized. [ 1.748345] microcode: sig=0x20652, pf=0x10, revision=0x11 [ 1.748366] microcode: Microcode Update Driver: v2.2. [ 1.748372] IPI shorthand broadcast: enabled [ 1.748383] sched_clock: Marking stable (1745620170, 2565378)->(1773433506, -25247958) [ 1.748524] registered taskstats version 1 [ 1.748539] Loading compiled-in X.509 certificates [ 1.762750] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.808381] Loaded X.509 cert 'Fedora kernel signing key: f54d48336bc055706d057f2f48fdee58fd1c52ed' [ 1.808413] zswap: loaded using pool lzo/zbud [ 1.808684] Key type ._fscrypt registered [ 1.808685] Key type .fscrypt registered [ 1.808686] Key type fscrypt-provisioning registered [ 1.816320] Key type big_key registered [ 1.824946] Key type encrypted registered [ 1.824968] ima: No TPM chip found, activating TPM-bypass! [ 1.824984] ima: Allocated hash algorithm: sha256 [ 1.825001] ima: No architecture policies found [ 1.825877] PM: Magic number: 0:820:800 [ 2.013974] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.015278] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133 [ 2.015281] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.016837] ata1.00: configured for UDMA/133 [ 2.017365] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 C60F PQ: 0 ANSI: 5 [ 2.017642] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.017756] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 2.017768] sd 0:0:0:0: [sda] Write Protect is off [ 2.017771] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.017788] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.037298] sda: sda1 sda2 [ 2.038101] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.041319] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.049279] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.170070] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 2.170075] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.170699] hub 1-1:1.0: USB hub found [ 2.170946] hub 1-1:1.0: 6 ports detected [ 2.177769] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 2.177772] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.178220] hub 2-1:1.0: USB hub found [ 2.178423] hub 2-1:1.0: 8 ports detected [ 2.319241] tsc: Refined TSC clocksource calibration: 2127.999 MHz [ 2.319253] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1eac822addd, max_idle_ns: 440795285886 ns [ 2.319354] clocksource: Switched to clocksource tsc [ 2.325891] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.338525] ata2.00: ATAPI: TSSTcorp CDDVDW TS-U633F, AC00, max UDMA/100 [ 2.338529] ata2.00: applying bridge limits [ 2.354524] ata2.00: configured for UDMA/100 [ 2.361579] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-U633F AC00 PQ: 0 ANSI: 5 [ 2.406111] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.406115] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.406743] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.406904] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.447234] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 2.486096] random: fast init done [ 2.599571] psmouse serio2: synaptics: queried max coordinates: x [..5682], y [..4692] [ 2.633298] usb 1-1.1: New USB device found, idVendor=0402, idProduct=9665, bcdDevice= 0.09 [ 2.633301] usb 1-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 2.633304] usb 1-1.1: Product: 1.3M WebCam [ 2.633305] usb 1-1.1: Manufacturer: XPA2P0M5V [ 2.678568] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000/0xa0000/0x0, board id: 0, fw id: 554713 [ 2.729229] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10 [ 2.735549] Freeing unused decrypted memory: 2040K [ 2.736294] Freeing unused kernel image (initmem) memory: 2468K [ 2.736389] Write protecting the kernel read-only data: 24576k [ 2.737375] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 2.737580] Freeing unused kernel image (rodata/data gap) memory: 28K [ 2.805567] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.805574] rodata_test: all tests were successful [ 2.805634] x86/mm: Checking user space page tables [ 2.873566] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.873578] Run /init as init process [ 2.873580] with arguments: [ 2.873582] /init [ 2.873583] rhgb [ 2.873584] with environment: [ 2.873585] HOME=/ [ 2.873586] TERM=linux [ 2.873587] BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.7.11-200.fc32.x86_64 [ 2.888328] systemd[1]: systemd v245.7-1.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.900411] systemd[1]: Detected architecture x86-64. [ 2.900416] systemd[1]: Running in initial RAM disk. [ 2.900461] systemd[1]: Set hostname to ... [ 3.017958] random: systemd: uninitialized urandom read (16 bytes read) [ 3.019136] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice. [ 3.019328] random: systemd: uninitialized urandom read (16 bytes read) [ 3.019342] systemd[1]: Reached target Slices. [ 3.019363] random: systemd: uninitialized urandom read (16 bytes read) [ 3.019374] systemd[1]: Reached target Swap. [ 3.019398] systemd[1]: Reached target Timers. [ 3.019702] systemd[1]: Listening on Journal Audit Socket. [ 3.019880] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.020048] systemd[1]: Listening on Journal Socket. [ 3.020230] systemd[1]: Listening on udev Control Socket. [ 3.020351] systemd[1]: Listening on udev Kernel Socket. [ 3.020381] systemd[1]: Reached target Sockets. [ 3.021571] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.022768] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon. [ 3.025565] systemd[1]: Starting Journal Service... [ 3.027474] systemd[1]: Starting Load Kernel Modules... [ 3.029097] systemd[1]: Starting Setup Virtual Console... [ 3.030421] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.032316] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.069126] systemd[1]: Finished Create Static Device Nodes in /dev. [ 3.073754] fuse: init (API version 7.31) [ 3.077246] systemd[1]: Finished Load Kernel Modules. [ 3.078853] systemd[1]: Starting Apply Kernel Variables... [ 3.096530] systemd[1]: Finished Apply Kernel Variables. [ 3.162957] systemd[1]: Started Journal Service. [ 4.179344] atl1c 0000:01:00.0 enp1s0: renamed from eth0 [ 4.752288] pci 0000:00:00.0: Intel HD Graphics Chipset [ 4.752311] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 4.752828] pci 0000:00:00.0: detected 131072K stolen memory [ 4.752889] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.753453] Console: switching to colour dummy device 80x25 [ 4.755712] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.756533] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.802381] [drm] Initialized i915 1.6.0 20200313 for 0000:00:02.0 on minor 0 [ 4.803696] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.804383] acpi device:01: registered as cooling_device4 [ 4.804508] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13 [ 4.817007] fbcon: i915drmfb (fb0) is primary device [ 5.632908] Console: switching to colour frame buffer device 170x48 [ 5.656473] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 6.632914] PM: Image not found (code -22) [ 6.670046] random: crng init done [ 6.670048] random: 7 urandom warning(s) missed due to ratelimiting [ 16.549250] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 17.188410] systemd-journald[182]: Received SIGTERM from PID 1 (systemd). [ 19.187741] SELinux: Permission watch in class filesystem not defined in policy. [ 19.187749] SELinux: Permission watch in class file not defined in policy. [ 19.187750] SELinux: Permission watch_mount in class file not defined in policy. [ 19.187751] SELinux: Permission watch_sb in class file not defined in policy. [ 19.187752] SELinux: Permission watch_with_perm in class file not defined in policy. [ 19.187753] SELinux: Permission watch_reads in class file not defined in policy. [ 19.187758] SELinux: Permission watch in class dir not defined in policy. [ 19.187759] SELinux: Permission watch_mount in class dir not defined in policy. [ 19.187759] SELinux: Permission watch_sb in class dir not defined in policy. [ 19.187760] SELinux: Permission watch_with_perm in class dir not defined in policy. [ 19.187761] SELinux: Permission watch_reads in class dir not defined in policy. [ 19.187768] SELinux: Permission watch in class lnk_file not defined in policy. [ 19.187769] SELinux: Permission watch_mount in class lnk_file not defined in policy. [ 19.187770] SELinux: Permission watch_sb in class lnk_file not defined in policy. [ 19.187770] SELinux: Permission watch_with_perm in class lnk_file not defined in policy. [ 19.187771] SELinux: Permission watch_reads in class lnk_file not defined in policy. [ 19.187775] SELinux: Permission watch in class chr_file not defined in policy. [ 19.187776] SELinux: Permission watch_mount in class chr_file not defined in policy. [ 19.187777] SELinux: Permission watch_sb in class chr_file not defined in policy. [ 19.187778] SELinux: Permission watch_with_perm in class chr_file not defined in policy. [ 19.187779] SELinux: Permission watch_reads in class chr_file not defined in policy. [ 19.187783] SELinux: Permission watch in class blk_file not defined in policy. [ 19.187784] SELinux: Permission watch_mount in class blk_file not defined in policy. [ 19.187785] SELinux: Permission watch_sb in class blk_file not defined in policy. [ 19.187785] SELinux: Permission watch_with_perm in class blk_file not defined in policy. [ 19.187786] SELinux: Permission watch_reads in class blk_file not defined in policy. [ 19.187790] SELinux: Permission watch in class sock_file not defined in policy. [ 19.187791] SELinux: Permission watch_mount in class sock_file not defined in policy. [ 19.187792] SELinux: Permission watch_sb in class sock_file not defined in policy. [ 19.187793] SELinux: Permission watch_with_perm in class sock_file not defined in policy. [ 19.187794] SELinux: Permission watch_reads in class sock_file not defined in policy. [ 19.187798] SELinux: Permission watch in class fifo_file not defined in policy. [ 19.187798] SELinux: Permission watch_mount in class fifo_file not defined in policy. [ 19.187799] SELinux: Permission watch_sb in class fifo_file not defined in policy. [ 19.187800] SELinux: Permission watch_with_perm in class fifo_file not defined in policy. [ 19.187801] SELinux: Permission watch_reads in class fifo_file not defined in policy. [ 19.188040] SELinux: Class perf_event not defined in policy. [ 19.188041] SELinux: Class lockdown not defined in policy. [ 19.188041] SELinux: the above unknown classes and permissions will be allowed [ 19.188057] SELinux: policy capability network_peer_controls=1 [ 19.188058] SELinux: policy capability open_perms=1 [ 19.188059] SELinux: policy capability extended_socket_class=1 [ 19.188059] SELinux: policy capability always_check_network=0 [ 19.188060] SELinux: policy capability cgroup_seclabel=1 [ 19.188060] SELinux: policy capability nnp_nosuid_transition=1 [ 19.188061] SELinux: policy capability genfs_seclabel_symlinks=0 [ 19.256482] systemd[1]: Successfully loaded SELinux policy in 548.728ms. [ 19.453501] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 19.971956] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 55.195ms. [ 20.048241] systemd[1]: systemd v245.7-1.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 20.060355] systemd[1]: Detected architecture x86-64. [ 20.074088] systemd[1]: Set hostname to ... [ 24.589073] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid \xe2\x86\x92 /run/teamviewerd.pid; please update the unit file accordingly. [ 25.389154] systemd[1]: initrd-switch-root.service: Succeeded. [ 25.389418] systemd[1]: Stopped Switch Root. [ 25.390318] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 25.390901] systemd[1]: Created slice Virtual Machine and Container Slice. [ 25.391343] systemd[1]: Created slice system-getty.slice. [ 25.391735] systemd[1]: Created slice system-modprobe.slice. [ 25.392116] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 25.392671] systemd[1]: Created slice User and Session Slice. [ 25.392733] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. [ 25.392926] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 25.393687] systemd[1]: Set up automount ... [ 25.393768] systemd[1]: Reached target Login Prompts. [ 25.393825] systemd[1]: Stopped target Switch Root. [ 25.393870] systemd[1]: Stopped target Initrd File Systems. [ 25.393906] systemd[1]: Stopped target Initrd Root File System. [ 25.393990] systemd[1]: Reached target Slices. [ 25.395377] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 25.396933] systemd[1]: Listening on LVM2 poll daemon socket. [ 25.397196] systemd[1]: Listening on multipathd control socket. [ 25.403767] systemd[1]: Listening on Process Core Dump Socket. [ 25.404018] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 25.404988] systemd[1]: Listening on udev Control Socket. [ 25.405595] systemd[1]: Listening on udev Kernel Socket. [ 25.406161] systemd[1]: Listening on User Database Manager Socket. [ 25.408233] systemd[1]: Activating swap /dev/mapper/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [ 25.410283] systemd[1]: Mounting Huge Pages File System... [ 25.412419] systemd[1]: Mounting POSIX Message Queue File System... [ 25.414319] systemd[1]: Mounting Kernel Debug File System... [ 25.416276] systemd[1]: Mounting Kernel Trace File System... [ 25.416607] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 25.418570] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 25.420256] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 25.420478] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 25.422099] systemd[1]: Starting Preprocess NFS configuration convertion... [ 25.422664] systemd[1]: plymouth-switch-root.service: Succeeded. [ 25.423075] systemd[1]: Stopped Plymouth switch root service. [ 25.597073] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 25.597183] systemd[1]: Stopped Journal Service. [ 25.599816] systemd[1]: Starting Journal Service... [ 25.657112] systemd[1]: Starting Load Kernel Modules... [ 25.658532] systemd[1]: Starting Remount Root and Kernel File Systems... [ 25.660057] systemd[1]: Starting Repartition Root Disk... [ 25.661634] systemd[1]: Starting udev Coldplug all Devices... [ 25.663434] systemd[1]: sysroot.mount: Succeeded. [ 25.664902] systemd[1]: Mounted Huge Pages File System. [ 25.665360] systemd[1]: Mounted POSIX Message Queue File System. [ 25.665626] systemd[1]: Mounted Kernel Debug File System. [ 25.665894] systemd[1]: Mounted Kernel Trace File System. [ 25.666727] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 25.667499] systemd[1]: nfs-convert.service: Succeeded. [ 25.667744] systemd[1]: Finished Preprocess NFS configuration convertion. [ 25.709244] Adding 2928636k swap on /dev/mapper/XXXXXXXXXXXXXXXXXXXXXXXXXXXX Priority:-2 extents:1 across:2928636k FS [ 25.717410] systemd[1]: Activated swap /dev/mapper/XXXXXXXXXXXXXXXXXXXXXXXXXXXX [ 25.719895] systemd[1]: Reached target Swap. [ 25.761667] systemd-journald[526]: File /run/log/journal/8967db50c7db4dc3a731c71ecfb94d17/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 25.876923] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 25.922757] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 25.924530] systemd[1]: Mounting Temporary Directory (/tmp)... [ 25.926990] systemd[1]: Started Journal Service. [ 26.067229] systemd-journald[526]: Received client request to flush runtime journal. [ 26.585551] systemd-journald[526]: File /var/log/journal/8967db50c7db4dc3a731c71ecfb94d17/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 30.662217] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 30.662220] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM [ 30.706679] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) [ 30.711411] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90 [ 30.713371] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM [ 30.713458] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200326/utaddress-204) [ 30.713465] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 30.713468] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200326/utaddress-204) [ 30.713473] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.EC0.GPBD) (20200326/utaddress-204) [ 30.713478] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 30.713479] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200326/utaddress-204) [ 30.713482] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.EC0.GPBD) (20200326/utaddress-204) [ 30.713486] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 30.713487] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200326/utaddress-204) [ 30.713491] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.LPCB.EC0.GPBD) (20200326/utaddress-204) [ 30.713495] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 30.713496] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 31.340234] input: PC Speaker as /devices/platform/pcspkr/input/input14 [ 31.424829] acer_wmi: Acer Laptop ACPI-WMI Extras [ 31.424869] acer_wmi: Function bitmap for Communication Button: 0x1 [ 31.426977] input: Acer WMI hotkeys as /devices/virtual/input/input15 [ 31.558618] iTCO_vendor_support: vendor-support=0 [ 31.581409] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 31.581481] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460) [ 31.581796] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 32.080932] mc: Linux media interface: v0.10 [ 32.118460] videodev: Linux video capture interface: v2.00 [ 33.081733] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 33.083037] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 33.272406] uvcvideo: Found UVC 1.00 device 1.3M WebCam (0402:9665) [ 33.278620] uvcvideo 1-1.1:1.0: Entity type for entity Extension 6 was not initialized! [ 33.278624] uvcvideo 1-1.1:1.0: Entity type for entity Processing 5 was not initialized! [ 33.278627] uvcvideo 1-1.1:1.0: Entity type for entity Selector 4 was not initialized! [ 33.278629] uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was not initialized! [ 33.278752] input: 1.3M WebCam: 1.3M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input16 [ 33.278869] usbcore: registered new interface driver uvcvideo [ 33.278870] USB Video Class driver (1.1.1) [ 33.370233] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 33.882073] ath: phy0: Enable WAR for ASPM D3/L1 [ 33.923261] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 33.923761] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 34.021786] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 34.021790] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 34.021792] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 34.021793] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 34.021795] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 34.021797] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 34.021799] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 34.021801] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 34.055379] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 34.055498] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 34.055616] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 34.316360] ath: phy0: ASPM enabled: 0x42 [ 34.316365] ath: EEPROM regdomain: 0x65 [ 34.316366] ath: EEPROM indicates we should expect a direct regpair map [ 34.316370] ath: Country alpha2 being used: 00 [ 34.316371] ath: Regpair used: 0x65 [ 34.319653] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 34.320607] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffff9e1ac04d0000, irq=17 [ 34.426833] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 [ 35.089071] loop: module loaded [ 36.088159] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 38.529422] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 43.920449] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 44.829466] RPC: Registered named UNIX socket transport module. [ 44.829469] RPC: Registered udp transport module. [ 44.829469] RPC: Registered tcp transport module. [ 44.829470] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 75.704264] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 75.739155] tun: Universal TUN/TAP device driver, 1.6 [ 75.741782] virbr0: port 1(virbr0-nic) entered blocking state [ 75.741787] virbr0: port 1(virbr0-nic) entered disabled state [ 75.741905] device virbr0-nic entered promiscuous mode [ 77.020743] virbr0: port 1(virbr0-nic) entered blocking state [ 77.020748] virbr0: port 1(virbr0-nic) entered listening state [ 77.103200] virbr0: port 1(virbr0-nic) entered disabled state [ 98.813364] rfkill: input handler disabled [ 187.627878] systemd-journald[526]: File /var/log/journal/8967db50c7db4dc3a731c71ecfb94d17/user-XXXX.journal corrupted or uncleanly shut down, renaming and replacing. [ 188.089335] rfkill: input handler enabled [ 199.963697] rfkill: input handler disabled [ 536.112597] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 536.132493] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 536.137158] wlp2s0: authenticated [ 536.138033] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 536.148241] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 536.148415] wlp2s0: associated [ 536.149185] ath: EEPROM regdomain: 0x833a [ 536.149186] ath: EEPROM indicates we should expect a country code [ 536.149187] ath: doing EEPROM country->regdmn map search [ 536.149188] ath: country maps to regdmn code: 0x37 [ 536.149189] ath: Country alpha2 being used: GB [ 536.149190] ath: Regpair used: 0x37 [ 536.149191] ath: regdomain 0x833a dynamically updated by country element [ 536.267647] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 536.314752] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 688.015029] perf: interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [ 766.403493] perf: interrupt took too long (3155 > 3150), lowering kernel.perf_event_max_sample_rate to 63000 [ 1659.063249] perf: interrupt took too long (3944 > 3943), lowering kernel.perf_event_max_sample_rate to 50000 [ 2100.923664] PM: suspend entry (deep) [ 2103.044256] Filesystems sync: 2.120 seconds [ 2103.246028] Freezing user space processes ... (elapsed 1.579 seconds) done. [ 2104.825825] OOM killer disabled. [ 2104.825826] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2104.827046] printk: Suspending console(s) (use no_console_suspend to debug) [ 2104.842004] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 2104.853689] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2104.904143] sd 0:0:0:0: [sda] Stopping disk [ 2105.358156] PM: suspend devices took 0.531 seconds [ 2105.373189] ACPI: EC: interrupt blocked [ 2105.386849] ACPI: Preparing to enter system sleep state S3 [ 2105.387577] ACPI: EC: event blocked [ 2105.387578] ACPI: EC: EC stopped [ 2105.387580] PM: Saving platform NVS memory [ 2105.388270] Disabling non-boot CPUs ... [ 2105.390405] smpboot: CPU 1 is now offline [ 2105.402779] smpboot: CPU 2 is now offline [ 2105.413811] smpboot: CPU 3 is now offline [ 2105.425406] ACPI: Low-level resume complete [ 2105.425485] ACPI: EC: EC started [ 2105.425485] PM: Restoring platform NVS memory [ 2105.426634] Enabling non-boot CPUs ... [ 2105.426697] x86: Booting SMP configuration: [ 2105.426698] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 2105.430306] CPU1 is up [ 2105.430360] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 2105.433811] CPU2 is up [ 2105.433853] smpboot: Booting Node 0 Processor 3 APIC 0x5 [ 2105.436849] CPU3 is up [ 2105.439290] ACPI: Waking up from system sleep state S3 [ 2105.439901] pcieport 0000:00:1c.0: EDR: ACPI event 0x0 received [ 2105.440123] ACPI: EC: interrupt unblocked [ 2105.463773] ACPI: EC: event unblocked [ 2105.465359] ath: phy0: ASPM enabled: 0x42 [ 2105.469751] sd 0:0:0:0: [sda] Starting disk [ 2105.690436] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [ 2105.777163] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2105.837114] ata2.00: configured for UDMA/100 [ 2105.952908] PM: resume devices took 0.489 seconds [ 2105.952955] OOM killer enabled. [ 2105.952956] Restarting tasks ... done. [ 2105.959795] video LNXVIDEO:00: Restoring backlight state [ 2105.959929] PM: suspend exit [ 2106.237034] psmouse serio2: synaptics: queried max coordinates: x [..5682], y [..4692] [ 2107.232483] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2107.249967] ata1.00: configured for UDMA/133 [ 2249.557187] perf: interrupt took too long (5050 > 4930), lowering kernel.perf_event_max_sample_rate to 39000 [ 2334.370690] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 2334.391265] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2334.393051] wlp2s0: authenticated [ 2334.394223] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2334.406225] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 2334.406408] wlp2s0: associated [ 2334.406626] ath: EEPROM regdomain: 0x833a [ 2334.406627] ath: EEPROM indicates we should expect a country code [ 2334.406628] ath: doing EEPROM country->regdmn map search [ 2334.406629] ath: country maps to regdmn code: 0x37 [ 2334.406630] ath: Country alpha2 being used: GB [ 2334.406631] ath: Regpair used: 0x37 [ 2334.406632] ath: regdomain 0x833a dynamically updated by country element [ 2334.489925] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 2334.635546] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 3911.916001] PM: suspend entry (deep) [ 3921.486587] Filesystems sync: 9.570 seconds [ 3923.237786] Freezing user space processes ... (elapsed 0.291 seconds) done. [ 3923.529158] OOM killer disabled. [ 3923.529160] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3923.530872] printk: Suspending console(s) (use no_console_suspend to debug) [ 3923.531268] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 3923.555601] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3923.555820] sd 0:0:0:0: [sda] Stopping disk [ 3923.983518] PM: suspend devices took 0.453 seconds [ 3923.998093] ACPI: EC: interrupt blocked [ 3924.009916] ACPI: Preparing to enter system sleep state S3 [ 3924.010271] ACPI: EC: event blocked [ 3924.010271] ACPI: EC: EC stopped [ 3924.010272] PM: Saving platform NVS memory [ 3924.010672] Disabling non-boot CPUs ... [ 3924.012567] smpboot: CPU 1 is now offline [ 3924.017845] smpboot: CPU 2 is now offline [ 3924.025353] smpboot: CPU 3 is now offline [ 3924.031771] ACPI: Low-level resume complete [ 3924.031848] ACPI: EC: EC started [ 3924.031849] PM: Restoring platform NVS memory [ 3924.032965] Enabling non-boot CPUs ... [ 3924.033065] x86: Booting SMP configuration: [ 3924.033066] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 3924.036585] CPU1 is up [ 3924.036624] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 3924.040071] CPU2 is up [ 3924.040111] smpboot: Booting Node 0 Processor 3 APIC 0x5 [ 3924.043089] CPU3 is up [ 3924.045538] ACPI: Waking up from system sleep state S3 [ 3924.046170] pcieport 0000:00:1c.0: EDR: ACPI event 0x0 received [ 3924.046392] ACPI: EC: interrupt unblocked [ 3924.070407] ACPI: EC: event unblocked [ 3924.071867] ath: phy0: ASPM enabled: 0x42 [ 3924.080043] sd 0:0:0:0: [sda] Starting disk [ 3924.291065] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [ 3924.385244] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3924.448601] ata2.00: configured for UDMA/100 [ 3924.564344] PM: resume devices took 0.494 seconds [ 3924.564419] OOM killer enabled. [ 3924.564421] Restarting tasks ... done. [ 3924.567511] video LNXVIDEO:00: Restoring backlight state [ 3924.567663] PM: suspend exit [ 3924.862081] psmouse serio2: synaptics: queried max coordinates: x [..5682], y [..4692] [ 3925.841046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3925.849214] ata1.00: configured for UDMA/133 [ 3928.507747] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 3928.557015] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 3928.558791] wlp2s0: authenticated [ 3928.559987] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 3928.570265] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 3928.570438] wlp2s0: associated [ 3928.570563] ath: EEPROM regdomain: 0x833a [ 3928.570563] ath: EEPROM indicates we should expect a country code [ 3928.570565] ath: doing EEPROM country->regdmn map search [ 3928.570566] ath: country maps to regdmn code: 0x37 [ 3928.570567] ath: Country alpha2 being used: GB [ 3928.570567] ath: Regpair used: 0x37 [ 3928.570569] ath: regdomain 0x833a dynamically updated by country element [ 3928.634328] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 3928.843163] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 3934.100485] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 3934.127704] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 3934.131559] wlp2s0: authenticated [ 3934.132023] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 3934.142461] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 3934.142927] wlp2s0: associated [ 3934.143166] ath: EEPROM regdomain: 0x833a [ 3934.143167] ath: EEPROM indicates we should expect a country code [ 3934.143169] ath: doing EEPROM country->regdmn map search [ 3934.143170] ath: country maps to regdmn code: 0x37 [ 3934.143171] ath: Country alpha2 being used: GB [ 3934.143172] ath: Regpair used: 0x37 [ 3934.143174] ath: regdomain 0x833a dynamically updated by country element [ 3934.163461] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 3934.165997] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 4987.442705] PM: suspend entry (deep) [ 4988.317942] Filesystems sync: 0.875 seconds [ 4988.375833] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 4988.378938] OOM killer disabled. [ 4988.378939] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4988.380715] printk: Suspending console(s) (use no_console_suspend to debug) [ 4988.381328] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 4988.403707] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4988.610642] sd 0:0:0:0: [sda] Stopping disk [ 4989.066551] PM: suspend devices took 0.685 seconds [ 4989.081097] ACPI: EC: interrupt blocked [ 4989.093009] ACPI: Preparing to enter system sleep state S3 [ 4989.093391] ACPI: EC: event blocked [ 4989.093392] ACPI: EC: EC stopped [ 4989.093393] PM: Saving platform NVS memory [ 4989.093799] Disabling non-boot CPUs ... [ 4989.095676] smpboot: CPU 1 is now offline [ 4989.100800] smpboot: CPU 2 is now offline [ 4989.106349] smpboot: CPU 3 is now offline [ 4989.111610] ACPI: Low-level resume complete [ 4989.111687] ACPI: EC: EC started [ 4989.111688] PM: Restoring platform NVS memory [ 4989.112834] Enabling non-boot CPUs ... [ 4989.112898] x86: Booting SMP configuration: [ 4989.112899] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 4989.116516] CPU1 is up [ 4989.116556] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 4989.119979] CPU2 is up [ 4989.120022] smpboot: Booting Node 0 Processor 3 APIC 0x5 [ 4989.122990] CPU3 is up [ 4989.125430] ACPI: Waking up from system sleep state S3 [ 4989.126012] pcieport 0000:00:1c.0: EDR: ACPI event 0x0 received [ 4989.126245] ACPI: EC: interrupt unblocked [ 4989.150511] ACPI: EC: event unblocked [ 4989.152107] ath: phy0: ASPM enabled: 0x42 [ 4989.159115] sd 0:0:0:0: [sda] Starting disk [ 4989.378152] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [ 4989.464282] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4989.523368] ata2.00: configured for UDMA/100 [ 4989.639179] PM: resume devices took 0.489 seconds [ 4989.639214] OOM killer enabled. [ 4989.639215] Restarting tasks ... done. [ 4989.651729] video LNXVIDEO:00: Restoring backlight state [ 4989.651902] PM: suspend exit [ 4989.922840] psmouse serio2: synaptics: queried max coordinates: x [..5682], y [..4692] [ 4990.972124] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4990.987540] ata1.00: configured for UDMA/133 [ 4994.500507] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 4994.528061] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 4994.532790] wlp2s0: authenticated [ 4994.534182] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 4994.551778] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 4994.551952] wlp2s0: associated [ 4994.552148] ath: EEPROM regdomain: 0x833a [ 4994.552149] ath: EEPROM indicates we should expect a country code [ 4994.552150] ath: doing EEPROM country->regdmn map search [ 4994.552152] ath: country maps to regdmn code: 0x37 [ 4994.552153] ath: Country alpha2 being used: GB [ 4994.552153] ath: Regpair used: 0x37 [ 4994.552155] ath: regdomain 0x833a dynamically updated by country element [ 4994.581086] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 4994.618732] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [11314.021755] PM: suspend entry (deep) [11320.774830] Filesystems sync: 6.753 seconds [11320.953920] Freezing user space processes ... (elapsed 0.282 seconds) done. [11321.236064] OOM killer disabled. [11321.236065] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [11321.237906] printk: Suspending console(s) (use no_console_suspend to debug) [11321.238465] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [11321.260243] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11321.301415] sd 0:0:0:0: [sda] Stopping disk [11321.746103] PM: suspend devices took 0.508 seconds [11321.760353] ACPI: EC: interrupt blocked [11321.772233] ACPI: Preparing to enter system sleep state S3 [11321.772625] ACPI: EC: event blocked [11321.772626] ACPI: EC: EC stopped [11321.772627] PM: Saving platform NVS memory [11321.773024] Disabling non-boot CPUs ... [11321.774912] smpboot: CPU 1 is now offline [11321.780203] smpboot: CPU 2 is now offline [11321.787284] smpboot: CPU 3 is now offline [11321.793499] ACPI: Low-level resume complete [11321.793578] ACPI: EC: EC started [11321.793578] PM: Restoring platform NVS memory [11321.794751] Enabling non-boot CPUs ... [11321.794814] x86: Booting SMP configuration: [11321.794815] smpboot: Booting Node 0 Processor 1 APIC 0x1 [11321.798342] CPU1 is up [11321.798381] smpboot: Booting Node 0 Processor 2 APIC 0x4 [11321.801859] CPU2 is up [11321.801900] smpboot: Booting Node 0 Processor 3 APIC 0x5 [11321.804876] CPU3 is up [11321.807347] ACPI: Waking up from system sleep state S3 [11321.807923] pcieport 0000:00:1c.0: EDR: ACPI event 0x0 received [11321.808138] ACPI: EC: interrupt unblocked [11321.831743] ACPI: EC: event unblocked [11321.835335] ath: phy0: ASPM enabled: 0x42 [11321.840602] sd 0:0:0:0: [sda] Starting disk [11321.845311] mei_me 0000:00:16.0: less XXXX available than length=00000002. [11322.055417] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [11322.150017] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [11322.206990] ata2.00: configured for UDMA/100 [11322.322780] PM: resume devices took 0.491 seconds [11322.322813] OOM killer enabled. [11322.322814] Restarting tasks ... done. [11322.329834] video LNXVIDEO:00: Restoring backlight state [11322.329997] PM: suspend exit [11322.611580] psmouse serio2: synaptics: queried max coordinates: x [..5682], y [..4692] [11323.598423] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [11323.603634] ata1.00: configured for UDMA/133 [11703.088796] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [11703.113892] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [11703.116069] wlp2s0: authenticated [11703.119265] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [11703.129578] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [11703.129749] wlp2s0: associated [11703.130055] ath: EEPROM regdomain: 0x833a [11703.130057] ath: EEPROM indicates we should expect a country code [11703.130058] ath: doing EEPROM country->regdmn map search [11703.130059] ath: country maps to regdmn code: 0x37 [11703.130060] ath: Country alpha2 being used: GB [11703.130061] ath: Regpair used: 0x37 [11703.130063] ath: regdomain 0x833a dynamically updated by country element [11703.170035] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [11703.213771] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [16653.982389] PM: suspend entry (deep) [16654.715098] Filesystems sync: 0.732 seconds [16654.770654] Freezing user space processes ... (elapsed 0.003 seconds) done. [16654.774514] OOM killer disabled. [16654.774515] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [16654.775987] printk: Suspending console(s) (use no_console_suspend to debug) [16654.776355] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [16654.798347] sd 0:0:0:0: [sda] Synchronizing SCSI cache [16654.873215] sd 0:0:0:0: [sda] Stopping disk [16655.338429] PM: suspend devices took 0.562 seconds [16655.353185] ACPI: EC: interrupt blocked [16655.366847] ACPI: Preparing to enter system sleep state S3 [16655.367227] ACPI: EC: event blocked [16655.367227] ACPI: EC: EC stopped [16655.367228] PM: Saving platform NVS memory [16655.367635] Disabling non-boot CPUs ... [16655.369494] smpboot: CPU 1 is now offline [16655.374485] smpboot: CPU 2 is now offline [16655.379924] smpboot: CPU 3 is now offline [16655.384538] ACPI: Low-level resume complete [16655.384615] ACPI: EC: EC started [16655.384616] PM: Restoring platform NVS memory [16655.385752] Enabling non-boot CPUs ... [16655.385816] x86: Booting SMP configuration: [16655.385817] smpboot: Booting Node 0 Processor 1 APIC 0x1 [16655.389324] CPU1 is up [16655.389367] smpboot: Booting Node 0 Processor 2 APIC 0x4 [16655.392787] CPU2 is up [16655.392827] smpboot: Booting Node 0 Processor 3 APIC 0x5 [16655.395785] CPU3 is up [16655.398228] ACPI: Waking up from system sleep state S3 [16655.398796] pcieport 0000:00:1c.0: EDR: ACPI event 0x0 received [16655.399022] ACPI: EC: interrupt unblocked [16655.423456] ACPI: EC: event unblocked [16655.424972] ath: phy0: ASPM enabled: 0x42 [16655.431464] sd 0:0:0:0: [sda] Starting disk [16655.645063] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [16655.731671] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [16655.800288] ata2.00: configured for UDMA/100 [16655.915971] PM: resume devices took 0.492 seconds [16655.915995] OOM killer enabled. [16655.915995] Restarting tasks ... done. [16655.929519] video LNXVIDEO:00: Restoring backlight state [16655.929665] PM: suspend exit [16656.591675] psmouse serio2: synaptics: queried max coordinates: x [..5682], y [..4692] [16657.611059] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [16657.619694] ata1.00: configured for UDMA/133 [16773.503581] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [16773.523691] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16773.525544] wlp2s0: authenticated [16773.526063] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16773.536401] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [16773.536589] wlp2s0: associated [16773.536803] ath: EEPROM regdomain: 0x833a [16773.536804] ath: EEPROM indicates we should expect a country code [16773.536805] ath: doing EEPROM country->regdmn map search [16773.536806] ath: country maps to regdmn code: 0x37 [16773.536807] ath: Country alpha2 being used: GB [16773.536808] ath: Regpair used: 0x37 [16773.536809] ath: regdomain 0x833a dynamically updated by country element [16773.546906] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [16773.567915] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [18382.717625] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.