Probe #ec27151293 of Lenovo ThinkPad W510 4389W1...

Log: dmesg

[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bba7bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bba7c000-0x00000000bba81fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bba82000-0x00000000bbb48fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbb49000-0x00000000bbb5bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbb5c000-0x00000000bbbdcfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbbdd000-0x00000000bbc0efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbc0f000-0x00000000bbc5cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbc5d000-0x00000000bbe67fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbe68000-0x00000000bbee7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbee8000-0x00000000bbf0efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbf0f000-0x00000000bbf16fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbf17000-0x00000000bbf1efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbf1f000-0x00000000bbf6bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbf6c000-0x00000000bbf79fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf7a000-0x00000000bbf7cfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbf7d000-0x00000000bbf80fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf81000-0x00000000bbf81fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbf82000-0x00000000bbf8afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf8b000-0x00000000bbf8bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbf8c000-0x00000000bbf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf9f000-0x00000000bbffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbfff000-0x00000000bbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: LENOVO 4389W1B/4389W1B, BIOS 6NET64WW (1.27 ) 07/14/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1595.994 MHz processor [ 0.007669] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.007672] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.007697] last_pfn = 0x340000 max_arch_pfn = 0x400000000 [ 0.007702] MTRR default type: uncachable [ 0.007703] MTRR fixed ranges enabled: [ 0.007705] 00000-9FFFF write-back [ 0.007706] A0000-BFFFF uncachable [ 0.007707] C0000-D3FFF write-protect [ 0.007708] D4000-DBFFF uncachable [ 0.007709] DC000-FFFFF write-protect [ 0.007710] MTRR variable ranges enabled: [ 0.007711] 0 disabled [ 0.007713] 1 base 000000000 mask F80000000 write-back [ 0.007715] 2 base 080000000 mask FC0000000 write-back [ 0.007716] 3 base 100000000 mask F00000000 write-back [ 0.007718] 4 base 200000000 mask F00000000 write-back [ 0.007719] 5 base 300000000 mask FC0000000 write-back [ 0.007721] 6 base 0BC000000 mask FFE000000 uncachable [ 0.007721] 7 disabled [ 0.008641] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.008762] e820: update [mem 0xbc000000-0xbdffffff] usable ==> reserved [ 0.008767] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.008771] last_pfn = 0xbc000 max_arch_pfn = 0x400000000 [ 0.020768] found SMP MP-table at [mem 0x000f68c0-0x000f68cf] [ 0.025362] RAMDISK: [mem 0x33051000-0x3581ffff] [ 0.025368] ACPI: Early table checksum verification disabled [ 0.025497] ACPI: RSDP 0x00000000000F6890 000024 (v02 LENOVO) [ 0.025502] ACPI: XSDT 0x00000000BBFF1AF3 00009C (v01 LENOVO TP-6N 00001270 LTP 00000000) [ 0.025509] ACPI: FACP 0x00000000BBFF1C00 0000F4 (v04 LENOVO TP-6N 00001270 LNVO 00000001) [ 0.025515] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20180810/tbfadt-569) [ 0.025518] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20180810/tbfadt-674) [ 0.025523] ACPI: DSDT 0x00000000BBFF1E9B 00CC73 (v01 LENOVO TP-6N 00001270 MSFT 03000001) [ 0.025528] ACPI: FACS 0x00000000BBEE7000 000040 [ 0.025532] ACPI: FACS 0x00000000BBEE7000 000040 [ 0.025536] ACPI: SSDT 0x00000000BBFF1DB4 0000E7 (v01 LENOVO TP-6N 00001270 MSFT 03000001) [ 0.025541] ACPI: ECDT 0x00000000BBFFEB0E 000052 (v01 LENOVO TP-6N 00001270 LNVO 00000001) [ 0.025546] ACPI: APIC 0x00000000BBFFEB60 0000BC (v01 LENOVO TP-6N 00001270 LNVO 00000001) [ 0.025551] ACPI: MCFG 0x00000000BBFFEC1C 00003C (v01 LENOVO TP-6N 00001270 LNVO 00000001) [ 0.025556] ACPI: HPET 0x00000000BBFFEC58 000038 (v01 LENOVO TP-6N 00001270 LNVO 00000001) [ 0.025561] ACPI: ASF! 0x00000000BBFFEDBE 0000A4 (v16 LENOVO TP-6N 00001270 PTL 00000001) [ 0.025566] ACPI: SLIC 0x00000000BBFFEE62 000176 (v01 LENOVO TP-6N 00001270 LTP 00000000) [ 0.025571] ACPI: BOOT 0x00000000BBFFEFD8 000028 (v01 LENOVO TP-6N 00001270 LTP 00000001) [ 0.025575] ACPI: SSDT 0x00000000BBEE591A 00084B (v01 LENOVO TP-6N 00001270 INTL 20050513) [ 0.025580] ACPI: TCPA 0x00000000BBF8B000 000032 (v02 PTL CRESTLN 06040000 00005A52) [ 0.025585] ACPI: DMAR 0x00000000BBF81000 000068 (v01 INTEL CP_FIELD 00000001 INTL 00000001) [ 0.025590] ACPI: SSDT 0x00000000BBF7C000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.025595] ACPI: SSDT 0x00000000BBF7B000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) [ 0.025600] ACPI: SSDT 0x00000000BBF7A000 00049F (v01 PmRef ApTst 00003000 INTL 20060912) [ 0.025613] ACPI: Local APIC address 0xfee00000 [ 0.025762] No NUMA configuration found [ 0.025764] Faking a node at [mem 0x0000000000000000-0x000000033fffffff] [ 0.025769] NODE_DATA(0) allocated [mem 0x33fff3000-0x33fff7fff] [ 0.025792] Reserving 128MB of memory at 688MB for crashkernel (System RAM: 12219MB) [ 0.025826] Zone ranges: [ 0.025827] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.025829] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.025830] Normal [mem 0x0000000100000000-0x000000033fffffff] [ 0.025831] Device empty [ 0.025833] Movable zone start for each node [ 0.025834] Early memory node ranges [ 0.025835] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.025836] node 0: [mem 0x0000000000100000-0x00000000bba7bfff] [ 0.025837] node 0: [mem 0x00000000bba82000-0x00000000bbb48fff] [ 0.025838] node 0: [mem 0x00000000bbc0f000-0x00000000bbc5cfff] [ 0.025839] node 0: [mem 0x00000000bbf0f000-0x00000000bbf16fff] [ 0.025840] node 0: [mem 0x00000000bbf1f000-0x00000000bbf6bfff] [ 0.025841] node 0: [mem 0x00000000bbfff000-0x00000000bbffffff] [ 0.025842] node 0: [mem 0x0000000100000000-0x000000033fffffff] [ 0.026308] Zeroed struct page in unavailable ranges: 17532 pages [ 0.026310] Initmem setup node 0 [mem 0x0000000000001000-0x000000033fffffff] [ 0.026312] On node 0 totalpages: 3128196 [ 0.026314] DMA zone: 64 pages used for memmap [ 0.026315] DMA zone: 21 pages reserved [ 0.026316] DMA zone: 3997 pages, LIFO batch:0 [ 0.026470] DMA32 zone: 11952 pages used for memmap [ 0.026471] DMA32 zone: 764903 pages, LIFO batch:63 [ 0.058158] Normal zone: 36864 pages used for memmap [ 0.058160] Normal zone: 2359296 pages, LIFO batch:63 [ 0.144886] ACPI: PM-Timer IO Port: 0x1008 [ 0.144890] ACPI: Local APIC address 0xfee00000 [ 0.144900] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.144902] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.144903] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.144904] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.144905] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.144906] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.144907] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.144908] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.144924] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.144927] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.144929] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.144931] ACPI: IRQ0 used by override. [ 0.144933] ACPI: IRQ9 used by override. [ 0.144936] Using ACPI (MADT) for SMP configuration information [ 0.144938] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.144945] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.145001] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.145004] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.145005] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.145006] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff] [ 0.145007] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff] [ 0.145008] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff] [ 0.145009] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] [ 0.145012] PM: Registered nosave memory: [mem 0xbba7c000-0xbba81fff] [ 0.145015] PM: Registered nosave memory: [mem 0xbbb49000-0xbbb5bfff] [ 0.145016] PM: Registered nosave memory: [mem 0xbbb5c000-0xbbbdcfff] [ 0.145017] PM: Registered nosave memory: [mem 0xbbbdd000-0xbbc0efff] [ 0.145019] PM: Registered nosave memory: [mem 0xbbc5d000-0xbbe67fff] [ 0.145020] PM: Registered nosave memory: [mem 0xbbe68000-0xbbee7fff] [ 0.145021] PM: Registered nosave memory: [mem 0xbbee8000-0xbbf0efff] [ 0.145024] PM: Registered nosave memory: [mem 0xbbf17000-0xbbf1efff] [ 0.145027] PM: Registered nosave memory: [mem 0xbbf6c000-0xbbf79fff] [ 0.145028] PM: Registered nosave memory: [mem 0xbbf7a000-0xbbf7cfff] [ 0.145029] PM: Registered nosave memory: [mem 0xbbf7d000-0xbbf80fff] [ 0.145030] PM: Registered nosave memory: [mem 0xbbf81000-0xbbf81fff] [ 0.145031] PM: Registered nosave memory: [mem 0xbbf82000-0xbbf8afff] [ 0.145032] PM: Registered nosave memory: [mem 0xbbf8b000-0xbbf8bfff] [ 0.145033] PM: Registered nosave memory: [mem 0xbbf8c000-0xbbf9efff] [ 0.145034] PM: Registered nosave memory: [mem 0xbbf9f000-0xbbffefff] [ 0.145036] PM: Registered nosave memory: [mem 0xbc000000-0xbdffffff] [ 0.145037] PM: Registered nosave memory: [mem 0xbe000000-0xbf7fffff] [ 0.145038] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff] [ 0.145039] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.145040] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.145041] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff] [ 0.145042] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff] [ 0.145043] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff] [ 0.145044] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] [ 0.145045] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff] [ 0.145046] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff] [ 0.145047] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] [ 0.145048] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.145049] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.145050] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.145051] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.145053] [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.145054] Booting paravirtualized kernel on bare hardware [ 0.145058] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.451541] random: get_random_bytes called from start_kernel+0x93/0x52a with crng_init=0 [ 0.451553] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.451904] percpu: Embedded 45 pages/cpu s144536 r8192 d31592 u262144 [ 0.451917] pcpu-alloc: s144536 r8192 d31592 u262144 alloc=1*2097152 [ 0.451918] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.451955] Built 1 zonelists, mobility grouping on. Total pages: 3079295 [ 0.451956] Policy zone: Normal [ 0.451958] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-14-amd64 root=UUID=HASH_027-8CE7-A92C-1582-33DA6C5D044F ro quiet acpi_backlight=none crashkernel=384M-:128M [ 0.459015] Calgary: detecting Calgary via BIOS EBDA area [ 0.459018] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.512425] Memory: 12052020K/12512784K available (10252K kernel code, 1242K rwdata, 3324K rodata, 1600K init, 2260K bss, 460764K reserved, 0K cma-reserved) [ 0.512612] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.512620] Kernel/User page tables isolation: enabled [ 0.512682] ftrace: allocating 31973 entries in 125 pages [ 0.537300] rcu: Hierarchical RCU implementation. [ 0.537302] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.537303] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.542070] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16 [ 0.549204] Console: colour VGA+ 80x25 [ 0.549211] console [tty0] enabled [ 0.549237] ACPI: Core revision 20180810 [ 0.549530] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.549550] hpet clockevent registered [ 0.549558] APIC: Switch to symmetric I/O mode setup [ 0.549560] DMAR: Host address width 36 [ 0.549562] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.549569] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020e2 [ 0.549570] DMAR: RMRR base: 0x000000bbee9000 end: 0x000000bbefffff [ 0.550137] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.569553] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17015ca1233, max_idle_ns: 440795270039 ns [ 0.569571] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.98 BogoMIPS (lpj=6383976) [ 0.569574] pid_max: default: 32768 minimum: 301 [ 0.569622] Security Framework initialized [ 0.569623] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.569646] AppArmor: AppArmor initialized [ 0.573074] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.574837] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.574914] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.574971] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.575295] CPU0: Thermal monitoring enabled (TM1) [ 0.575305] process: using mwait in idle threads [ 0.575309] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.575310] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.575312] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.575314] Spectre V2 : Mitigation: Full generic retpoline [ 0.575315] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.575315] Speculative Store Bypass: Vulnerable [ 0.575362] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.575556] Freeing SMP alternatives memory: 24K [ 0.691932] smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz (family: 0x6, model: 0x1e, stepping: 0x5) [ 0.692079] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver. [ 0.692104] core: CPU erratum AAJ80 worked around [ 0.692105] core: CPUID marked event: 'bus cycles' unavailable [ 0.692107] ... version: 3 [ 0.692108] ... bit width: 48 [ 0.692109] ... generic registers: 4 [ 0.692110] ... value mask: 0000ffffffffffff [ 0.692110] ... max period: 000000007fffffff [ 0.692111] ... fixed-purpose events: 3 [ 0.692112] ... event mask: 000000070000000f [ 0.692164] rcu: Hierarchical SRCU implementation. [ 0.693243] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.693343] smp: Bringing up secondary CPUs ... [ 0.693456] x86: Booting SMP configuration: [ 0.693458] .... node #0, CPUs: #1 [ 0.693748] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.693748] #2 #3 #4 #5 #6 #7 [ 0.708012] smp: Brought up 1 node, 8 CPUs [ 0.708012] smpboot: Max logical packages: 1 [ 0.708012] smpboot: Total of 8 processors activated (25535.90 BogoMIPS) [ 0.710164] devtmpfs: initialized [ 0.710164] x86/mm: Memory block size: 128MB [ 0.713648] PM: Registering ACPI NVS region [mem 0xbbb5c000-0xbbbdcfff] (528384 bytes) [ 0.713648] PM: Registering ACPI NVS region [mem 0xbbe68000-0xbbee7fff] (524288 bytes) [ 0.713648] PM: Registering ACPI NVS region [mem 0xbbf6c000-0xbbf79fff] (57344 bytes) [ 0.713648] PM: Registering ACPI NVS region [mem 0xbbf7d000-0xbbf80fff] (16384 bytes) [ 0.713648] PM: Registering ACPI NVS region [mem 0xbbf82000-0xbbf8afff] (36864 bytes) [ 0.713648] PM: Registering ACPI NVS region [mem 0xbbf8c000-0xbbf9efff] (77824 bytes) [ 0.713685] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.713699] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.713757] pinctrl core: initialized pinctrl subsystem [ 0.713980] NET: Registered protocol family 16 [ 0.714112] cpuidle: using governor ladder [ 0.714112] cpuidle: using governor menu [ 0.714112] Simple Boot Flag at 0x35 set to 0x1 [ 0.714112] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.714112] ACPI: bus type PCI registered [ 0.714112] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.714112] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.714112] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.714112] PCI: Using configuration type 1 for base access [ 0.714112] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.714112] mtrr: probably your BIOS does not setup all CPUs. [ 0.714112] mtrr: corrected configuration. [ 0.714946] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.714946] ACPI: Added _OSI(Module Device) [ 0.714946] ACPI: Added _OSI(Processor Device) [ 0.714946] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.714946] ACPI: Added _OSI(Processor Aggregator Device) [ 0.714946] ACPI: Added _OSI(Linux-Dell-Video) [ 0.714946] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.714946] ACPI: EC: EC started [ 0.714946] ACPI: EC: interrupt blocked [ 0.714946] ACPI: \: Used as first EC [ 0.714946] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.714946] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.727762] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.729099] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.738099] ACPI: Dynamic OEM Table Load: [ 0.738106] ACPI: SSDT 0xFFFF8C75317CBC00 000385 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.738577] ACPI: Dynamic OEM Table Load: [ 0.738584] ACPI: SSDT 0xFFFF8C7531761000 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.739386] ACPI: Dynamic OEM Table Load: [ 0.739392] ACPI: SSDT 0xFFFF8C75317CA400 000303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.741838] ACPI: Dynamic OEM Table Load: [ 0.741843] ACPI: SSDT 0xFFFF8C75317B3400 000119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.744997] ACPI: Interpreter enabled [ 0.745022] ACPI: (supports S0 S3 S4 S5) [ 0.745024] ACPI: Using IOAPIC for interrupt routing [ 0.745053] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.745631] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.753171] ACPI: Power Resource [PUBS] (on) [ 0.753365] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.754967] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.759095] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.759231] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.759367] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.759502] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.759637] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.759771] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.759907] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.760042] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.760161] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff]) [ 0.760165] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.760170] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.760235] PCI host bridge to bus 0000:ff [ 0.760238] pci_bus 0000:ff: root bus resource [bus ff] [ 0.760247] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000 [ 0.760318] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000 [ 0.760388] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000 [ 0.760448] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000 [ 0.760511] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000 [ 0.760572] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000 [ 0.760634] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000 [ 0.760694] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000 [ 0.760753] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000 [ 0.760812] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000 [ 0.760872] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000 [ 0.760933] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000 [ 0.760993] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000 [ 0.761052] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000 [ 0.761110] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000 [ 0.761217] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.761221] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.761473] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR] [ 0.761605] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.761608] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.761610] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.761612] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.761918] PCI host bridge to bus 0000:00 [ 0.761921] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.761923] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.761925] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.761926] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.761928] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.761930] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.761932] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.761943] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000 [ 0.762085] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400 [ 0.762123] pci 0000:00:03.0: enabling Extended Tags [ 0.762165] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.762282] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000 [ 0.762424] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000 [ 0.762563] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000 [ 0.762699] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000 [ 0.762828] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000 [ 0.762940] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000 [ 0.763082] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.763118] pci 0000:00:16.0: reg 0x10: [mem 0xf2627800-0xf262780f 64bit] [ 0.763221] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.763336] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000 [ 0.763362] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff] [ 0.763375] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff] [ 0.763389] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f] [ 0.763471] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.763591] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.763625] pci 0000:00:1a.0: reg 0x10: [mem 0xf2628000-0xf26283ff] [ 0.763727] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.763845] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.763876] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit] [ 0.763969] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.764086] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.764194] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.764318] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.764425] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.764544] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400 [ 0.764651] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.764771] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.764877] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.765004] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400 [ 0.765110] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.765231] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400 [ 0.765338] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.765462] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.765494] pci 0000:00:1d.0: reg 0x10: [mem 0xf2628400-0xf26287ff] [ 0.765608] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.765735] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.765922] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100 [ 0.766154] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601 [ 0.766183] pci 0000:00:1f.2: reg 0x10: [io 0x1818-0x181f] [ 0.766196] pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f] [ 0.766209] pci 0000:00:1f.2: reg 0x18: [io 0x1810-0x1817] [ 0.766221] pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b] [ 0.766234] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f] [ 0.766246] pci 0000:00:1f.2: reg 0x24: [mem 0xf2627000-0xf26277ff] [ 0.766306] pci 0000:00:1f.2: PME# supported from D3hot [ 0.766420] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.766449] pci 0000:00:1f.3: reg 0x10: [mem 0xf2628800-0xf26288ff 64bit] [ 0.766475] pci 0000:00:1f.3: reg 0x20: [io 0x1860-0x187f] [ 0.766667] pci 0000:01:00.0: [10de:0a3c] type 00 class 0x030000 [ 0.766695] pci 0000:01:00.0: reg 0x10: [mem 0xcc000000-0xccffffff] [ 0.766711] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.766727] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.766738] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f] [ 0.766749] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.766758] pci 0000:01:00.0: enabling Extended Tags [ 0.766922] pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300 [ 0.766946] pci 0000:01:00.1: reg 0x10: [mem 0xcdefc000-0xcdefffff] [ 0.767007] pci 0000:01:00.1: enabling Extended Tags [ 0.767157] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.767160] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] [ 0.767163] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff] [ 0.767168] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.767232] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.767536] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000 [ 0.768084] pci 0000:03:00.0: reg 0x10: [mem 0xf2000000-0xf2001fff 64bit] [ 0.770001] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.770900] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.770910] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff] [ 0.771017] acpiphp: Slot [1] registered [ 0.771031] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.771040] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.771048] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.771059] pci 0000:00:1c.3: bridge window [mem 0xf2700000-0xf27fffff 64bit pref] [ 0.771192] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500 [ 0.771219] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 0.771253] pci 0000:0d:00.0: reg 0x10: [mem 0xf2100000-0xf21000ff] [ 0.771409] pci 0000:0d:00.0: supports D1 D2 [ 0.771411] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.771575] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000 [ 0.771609] pci 0000:0d:00.1: reg 0x10: [mem 0xf2100400-0xf21004ff] [ 0.771757] pci 0000:0d:00.1: supports D1 D2 [ 0.771759] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.771973] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.771983] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff] [ 0.772078] pci 0000:0f:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.772129] pci 0000:0f:00.0: reg 0x10: [mem 0xf2200000-0xf2201fff 64bit] [ 0.772300] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold [ 0.772352] pci 0000:0f:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.6 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 0.772449] pci 0000:00:1c.6: PCI bridge to [bus 0f-16] [ 0.772460] pci 0000:00:1c.6: bridge window [mem 0xf2200000-0xf22fffff] [ 0.772617] pci 0000:17:00.0: [1180:e822] type 00 class 0x080500 [ 0.772644] pci 0000:17:00.0: MMC controller base frequency changed to 50Mhz. [ 0.772677] pci 0000:17:00.0: reg 0x10: [mem 0xf2300000-0xf23000ff] [ 0.772833] pci 0000:17:00.0: supports D1 D2 [ 0.772834] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.773014] pci 0000:17:00.3: [1180:e832] type 00 class 0x0c0010 [ 0.773053] pci 0000:17:00.3: reg 0x10: [mem 0xf2300800-0xf2300fff] [ 0.773143] pci 0000:17:00.3: Enabling fixed DMA alias to 00.0 [ 0.773235] pci 0000:17:00.3: supports D1 D2 [ 0.773236] pci 0000:17:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.773447] pci 0000:00:1c.7: PCI bridge to [bus 17-1e] [ 0.773457] pci 0000:00:1c.7: bridge window [mem 0xf2300000-0xf23fffff] [ 0.773493] pci_bus 0000:1f: extended config space not accessible [ 0.773576] pci 0000:00:1e.0: PCI bridge to [bus 1f] (subtractive decode) [ 0.773592] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.773594] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.773596] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.773597] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.773599] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.773601] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 0.776120] ACPI: EC: interrupt unblocked [ 0.776129] ACPI: EC: event unblocked [ 0.776145] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.776146] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events [ 0.776231] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.776231] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.776231] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.776231] vgaarb: loaded [ 0.776231] pps_core: LinuxPPS API ver. 1 registered [ 0.776231] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.776231] PTP clock support registered [ 0.776231] EDAC MC: Ver: 3.0.0 [ 0.776231] PCI: Using ACPI for IRQ routing [ 0.781180] PCI: pci_cache_line_size set to 64 bytes [ 0.781573] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.781578] e820: reserve RAM buffer [mem 0xbba7c000-0xbbffffff] [ 0.781581] e820: reserve RAM buffer [mem 0xbbb49000-0xbbffffff] [ 0.781584] e820: reserve RAM buffer [mem 0xbbc5d000-0xbbffffff] [ 0.781586] e820: reserve RAM buffer [mem 0xbbf17000-0xbbffffff] [ 0.781589] e820: reserve RAM buffer [mem 0xbbf6c000-0xbbffffff] [ 0.781743] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.781743] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 0.781743] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.786566] hpet: hpet2 irq 24 for MSI [ 0.786569] hpet: hpet3 irq 25 for MSI [ 0.786569] hpet: hpet4 irq 26 for MSI [ 0.786569] hpet: hpet5 irq 27 for MSI [ 0.786569] hpet: hpet6 irq 28 for MSI [ 0.786569] clocksource: Switched to clocksource tsc-early [ 0.800742] VFS: Disk quotas dquot_6.6.0 [ 0.800768] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.800916] AppArmor: AppArmor Filesystem Enabled [ 0.800939] pnp: PnP ACPI init [ 0.802828] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.802831] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.802833] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.802835] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.802837] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.802839] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.802842] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.802844] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.802846] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.802848] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.802850] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.802852] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.802854] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.802856] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.802859] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.802866] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.803296] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.803298] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.803300] system 00:01: [io 0x1180-0x11ff] has been reserved [ 0.803303] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.803305] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.803307] system 00:01: [io 0x1600-0x1641] has been reserved [ 0.803309] system 00:01: [io 0x1644-0x167f] could not be reserved [ 0.803312] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.803314] system 00:01: [mem 0xf2626000-0xf2626fff] has been reserved [ 0.803316] system 00:01: [mem 0xc0000000-0xc0000fff] has been reserved [ 0.803318] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.803321] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.803323] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.803325] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.803327] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.803333] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.803404] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.803435] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.803464] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) [ 0.803831] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.804442] pnp: PnP ACPI: found 6 devices [ 0.810937] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.810966] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref] [ 0.810968] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.810972] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] [ 0.810976] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff] [ 0.810979] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.810984] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.810999] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.811008] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff] [ 0.811020] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.811027] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.811036] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.811044] pci 0000:00:1c.3: bridge window [mem 0xf2700000-0xf27fffff 64bit pref] [ 0.811054] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.811064] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff] [ 0.811076] pci 0000:00:1c.6: PCI bridge to [bus 0f-16] [ 0.811085] pci 0000:00:1c.6: bridge window [mem 0xf2200000-0xf22fffff] [ 0.811097] pci 0000:00:1c.7: PCI bridge to [bus 17-1e] [ 0.811106] pci 0000:00:1c.7: bridge window [mem 0xf2300000-0xf23fffff] [ 0.811119] pci 0000:00:1e.0: PCI bridge to [bus 1f] [ 0.811134] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.811136] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.811138] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.811140] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window] [ 0.811142] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window] [ 0.811143] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window] [ 0.811145] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.811147] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff] [ 0.811148] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref] [ 0.811151] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff] [ 0.811152] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.811154] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] [ 0.811156] pci_bus 0000:05: resource 2 [mem 0xf2700000-0xf27fffff 64bit pref] [ 0.811157] pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff] [ 0.811159] pci_bus 0000:0f: resource 1 [mem 0xf2200000-0xf22fffff] [ 0.811161] pci_bus 0000:17: resource 1 [mem 0xf2300000-0xf23fffff] [ 0.811163] pci_bus 0000:1f: resource 4 [io 0x0000-0x0cf7 window] [ 0.811165] pci_bus 0000:1f: resource 5 [io 0x0d00-0xffff window] [ 0.811166] pci_bus 0000:1f: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.811168] pci_bus 0000:1f: resource 7 [mem 0x000d4000-0x000d7fff window] [ 0.811170] pci_bus 0000:1f: resource 8 [mem 0x000d8000-0x000dbfff window] [ 0.811172] pci_bus 0000:1f: resource 9 [mem 0xc0000000-0xfebfffff window] [ 0.811284] NET: Registered protocol family 2 [ 0.811512] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.811647] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.812167] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.812599] TCP: Hash tables configured (established 131072 bind 65536) [ 0.812659] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.812830] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.813050] NET: Registered protocol family 1 [ 0.813056] NET: Registered protocol family 44 [ 0.813654] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.813676] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 0.813678] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.814114] PCI: CLS 64 bytes, default 64 [ 0.814163] Unpacking initramfs... [ 1.041572] random: fast init done [ 1.041573] random: fast init done [ 1.869838] Freeing initrd memory: 40764K [ 1.897591] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.897595] software IO TLB: mapped [mem 0xb7a7c000-0xbba7c000] (64MB) [ 1.898793] Initialise system trusted keyrings [ 1.898806] Key type blacklist registered [ 1.898891] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 1.900791] zbud: loaded [ 2.200708] Key type asymmetric registered [ 2.200710] Asymmetric key parser 'x509' registered [ 2.200721] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.200759] io scheduler noop registered [ 2.200761] io scheduler deadline registered [ 2.200802] io scheduler cfq registered (default) [ 2.200803] io scheduler mq-deadline registered [ 2.201957] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.201975] intel_idle: MWAIT substates: 0x1120 [ 2.201976] intel_idle: v0.4.1 model 0x1E [ 2.202360] intel_idle: lapic_timer_reliable_states 0x2 [ 2.204910] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.205502] Linux agpgart interface v0.103 [ 2.205653] AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX> [ 2.205654] AMD IOMMUv2 functionality not available on this system [ 2.207068] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.210924] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.210928] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.211576] mousedev: PS/2 mouse device common for all mice [ 2.211695] rtc_cmos 00:02: RTC can wake from S4 [ 2.211967] rtc_cmos 00:02: registered as rtc0 [ 2.212008] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.212626] ledtrig-cpu: registered to indicate activity on CPUs [ 2.213223] NET: Registered protocol family 10 [ 2.215690] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.231975] Segment Routing with IPv6 [ 2.232025] mip6: Mobile IPv6 [ 2.232028] NET: Registered protocol family 17 [ 2.232151] mpls_gso: MPLS GSO support [ 2.233542] mce: Using 9 MCE banks [ 2.233661] microcode: sig=0x106e5, pf=0x10, revision=0x3 [ 2.233900] microcode: Microcode Update Driver: v2.2. [ 2.233921] sched_clock: Marking stable (2226717902, 7166786)->(2365807822, -131923134) [ 2.234445] registered taskstats version 1 [ 2.234446] Loading compiled-in X.509 certificates [ 2.359064] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 2.359108] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 2.359155] zswap: loaded using pool lzo/zbud [ 2.359998] AppArmor: AppArmor sha1 policy hashing enabled [ 2.361021] rtc_cmos 00:02: setting system clock to 2021-02-03 09:36:31 UTC (1612344991) [ 2.365267] Freeing unused kernel image memory: 1600K [ 2.389821] Write protecting the kernel read-only data: 16384k [ 2.391315] Freeing unused kernel image memory: 2028K [ 2.391862] Freeing unused kernel image memory: 772K [ 2.420278] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.420515] x86/mm: Checking user space page tables [ 2.447727] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.447731] Run /init as init process [ 2.679601] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 2.679627] ACPI: Lid Switch [LID] [ 2.679716] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 2.679734] ACPI: Sleep Button [SLPB] [ 2.679835] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 2.679849] ACPI: Power Button [PWRF] [ 2.682957] acpi PNP0C14:01: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:00) [ 2.685884] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.686186] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5 [ 2.693135] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.693138] ACPI: Thermal Zone [THM0] (48 C) [ 2.703094] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20180810/utaddress-213) [ 2.703105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.703112] ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20180810/utaddress-213) [ 2.703119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.703121] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20180810/utaddress-213) [ 2.703128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.703130] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20180810/utaddress-213) [ 2.703137] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.703138] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.726088] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.726090] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.726321] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.732279] sdhci: Secure Digital Host Controller Interface driver [ 2.732281] sdhci: Copyright(c) Pierre Ossman [ 2.732293] ACPI: bus type USB registered [ 2.732344] usbcore: registered new interface driver usbfs [ 2.732362] usbcore: registered new interface driver hub [ 2.732428] usbcore: registered new device driver usb [ 2.732474] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.740502] SCSI subsystem initialized [ 2.747315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.750295] ehci-pci: EHCI PCI platform driver [ 2.750373] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1) [ 2.750562] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.750574] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.750663] ehci-pci 0000:00:1a.0: debug port 2 [ 2.750715] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.750759] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 2.754694] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.754704] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2628000 [ 2.754983] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 2.755034] sdhci-pci 0000:17:00.0: SDHCI controller found [1180:e822] (rev 1) [ 2.755170] sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.755213] mmc1 bounce up to 128 segments into one, max segment size 65536 bytes [ 2.755605] mmc1: SDHCI controller on PCI [0000:17:00.0] using DMA [ 2.773635] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.773930] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.773935] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.773938] usb usb1: Product: EHCI Host Controller [ 2.773941] usb usb1: Manufacturer: Linux 4.19.0-14-amd64 ehci_hcd [ 2.773944] usb usb1: SerialNumber: ... [ 2.774354] hub 1-0:1.0: USB hub found [ 2.774372] hub 1-0:1.0: 3 ports detected [ 2.774821] xhci_hcd 0000:0f:00.0: xHCI Host Controller [ 2.774836] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 2 [ 2.775139] xhci_hcd 0000:0f:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004 [ 2.775851] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.775855] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.775858] usb usb2: Product: xHCI Host Controller [ 2.775861] usb usb2: Manufacturer: Linux 4.19.0-14-amd64 xhci-hcd [ 2.775864] usb usb2: SerialNumber: ... [ 2.776097] hub 2-0:1.0: USB hub found [ 2.776122] hub 2-0:1.0: 2 ports detected [ 2.776389] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.776397] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 2.776400] xhci_hcd 0000:0f:00.0: xHCI Host Controller [ 2.776405] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 4 [ 2.776409] xhci_hcd 0000:0f:00.0: Host supports USB 3.0 SuperSpeed [ 2.776421] ehci-pci 0000:00:1d.0: debug port 2 [ 2.780409] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.780427] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2628400 [ 2.780442] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.780495] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 2.780498] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.780501] usb usb4: Product: xHCI Host Controller [ 2.780504] usb usb4: Manufacturer: Linux 4.19.0-14-amd64 xhci-hcd [ 2.780507] usb usb4: SerialNumber: ... [ 2.780756] hub 4-0:1.0: USB hub found [ 2.780803] hub 4-0:1.0: 2 ports detected [ 2.781166] libata version 3.00 loaded. [ 2.792379] ahci 0000:00:1f.2: version 3.0 [ 2.792713] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.792764] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode [ 2.792769] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 2.793630] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.793710] firewire_ohci 0000:17:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 2.793860] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.793862] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.793864] usb usb3: Product: EHCI Host Controller [ 2.793866] usb usb3: Manufacturer: Linux 4.19.0-14-amd64 ehci_hcd [ 2.793868] usb usb3: SerialNumber: ... [ 2.794150] hub 3-0:1.0: USB hub found [ 2.794178] hub 3-0:1.0: 3 ports detected [ 2.831009] scsi host0: ahci [ 2.831492] scsi host1: ahci [ 2.832038] scsi host2: ahci [ 2.832593] scsi host3: ahci [ 2.833528] scsi host4: ahci [ 2.834111] scsi host5: ahci [ 2.834282] ata1: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627100 irq 38 [ 2.834290] ata2: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627180 irq 38 [ 2.834292] ata3: DUMMY [ 2.834294] ata4: DUMMY [ 2.834301] ata5: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627300 irq 38 [ 2.834308] ata6: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627380 irq 38 [ 2.913670] tsc: Refined TSC clocksource calibration: 1595.885 MHz [ 2.913682] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1700f5a7ef5, max_idle_ns: 440795268337 ns [ 2.914126] clocksource: Switched to clocksource tsc [ 2.926551] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 2.926553] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.926689] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF [ 2.928958] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 3.109767] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.129764] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 3.146483] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.147931] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 3.147937] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 3.147941] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.186109] ata1.00: ATA-8: ST9500420AS, 0003LVM1, max UDMA/100 [ 3.186113] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 3.188621] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 3.188627] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 3.188631] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.190538] ata1.00: configured for UDMA/100 [ 3.190895] scsi 0:0:0:0: Direct-Access ATA ST9500420AS LVM1 PQ: 0 ANSI: 5 [ 3.266397] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 3.266408] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.267047] hub 1-1:1.0: USB hub found [ 3.267207] hub 1-1:1.0: 6 ports detected [ 3.286823] usb 3-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 3.286829] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.287483] hub 3-1:1.0: USB hub found [ 3.287807] hub 3-1:1.0: 8 ports detected [ 3.298020] firewire_core 0000:17:00.3: created device fw0: GUID f0def1ff0e9155ff, S400 [ 3.506657] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.518977] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 3.519399] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 3.529962] ata2.00: ATAPI: hp DVD RW AD-7586H, KH03, max UDMA/100 [ 3.542923] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 3.543317] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 3.553724] usb 1-1.1: new low-speed USB device number 3 using ehci-pci [ 3.554141] ata2.00: configured for UDMA/100 [ 3.556022] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7586H KH03 PQ: 0 ANSI: 5 [ 3.581722] usb 3-1.5: new full-speed USB device number 3 using ehci-pci [ 3.583913] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [ 3.664762] usb 1-1.1: New USB device found, idVendor=0765, idProduct=5001, bcdDevice= 0.01 [ 3.664767] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.670113] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367 [ 3.670117] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 3.672342] hidraw: raw HID events driver (C) Jiri Kosina [ 3.679945] usbcore: registered new interface driver usbhid [ 3.679946] usbhid: USB HID core driver [ 3.682844] hid-generic 0003:0765:5001.0001: hiddev0,hidraw0: USB HID v1.00 Device [HID 0765:5001] on usb-0000:00:1a.0-1.1/input0 [ 3.702621] usb 3-1.5: New USB device found, idVendor=17ef, idProduct=1003, bcdDevice= 1.00 [ 3.702626] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.702630] usb 3-1.5: Product: Integrated Smart Card Reader [ 3.702633] usb 3-1.5: Manufacturer: Lenovo [ 3.724651] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 3.749752] usb 1-1.3: new full-speed USB device number 4 using ehci-pci [ 3.859390] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016, bcdDevice= 0.02 [ 3.859396] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.859399] usb 1-1.3: Product: Biometric Coprocessor [ 3.859402] usb 1-1.3: Manufacturer: UPEK [ 3.894997] ata5: SATA link down (SStatus 0 SControl 300) [ 3.937728] usb 1-1.4: new full-speed USB device number 5 using ehci-pci [ 4.051677] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f, bcdDevice= 3.60 [ 4.051682] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.051685] usb 1-1.4: Product: Broadcom Bluetooth Device [ 4.051688] usb 1-1.4: Manufacturer: Broadcom Corp [ 4.051691] usb 1-1.4: SerialNumber: ... [ 4.129617] usb 1-1.6: new high-speed USB device number 6 using ehci-pci [ 4.206954] ata6: SATA link down (SStatus 0 SControl 300) [ 4.216250] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 4.216260] sd 0:0:0:0: [sda] Write Protect is off [ 4.216262] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.216273] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.244066] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f, bcdDevice=23.45 [ 4.244071] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.244074] usb 1-1.6: Product: Integrated Camera [ 4.244077] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 4.264995] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.264998] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.265577] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.304538] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4 [ 4.306074] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.513527] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 4.798166] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 5.474250] PM: Image not found (code -22) [ 5.659699] cryptd: max_cpu_qlen set to 1000 [ 5.813756] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 6.486689] random: crng init done [ 7.454843] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 7.832687] systemd[1]: Inserted module 'autofs4' [ 8.013024] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.029977] systemd[1]: Detected architecture x86-64. [ 8.051216] systemd[1]: Set hostname to ... [ 10.678372] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 10.680431] systemd[1]: Created slice User and Session Slice. [ 10.680560] systemd[1]: Listening on Journal Socket. [ 10.694230] systemd[1]: Starting Load Kernel Modules... [ 10.701462] systemd[1]: Starting Set the console keyboard layout... [ 10.702467] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 10.703480] systemd[1]: Mounting Huge Pages File System... [ 11.043377] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 11.274711] lp: driver loaded but no devices found [ 11.300926] ppdev: user-space parallel port driver [ 11.582068] systemd-journald[278]: Received request to flush runtime journal from PID 1 [ 12.214383] nvidia: loading out-of-tree module taints kernel. [ 12.214408] nvidia: module license 'NVIDIA' taints kernel. [ 12.214410] Disabling lock debugging due to kernel taint [ 12.221352] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 12.238305] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 12.239407] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 12.239440] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.108 Wed Dec 11 11:06:58 PST 2019 [ 13.253225] ACPI: AC Adapter [AC] (on-line) [ 13.271622] battery: ACPI: Battery Slot [BAT0] (battery present) [ 13.326225] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 13.831406] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 13.955717] iTCO_vendor_support: vendor-support=0 [ 13.964446] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 13.964505] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060) [ 13.964648] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.980791] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.980846] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 13.994078] Non-volatile memory driver v1.3 [ 14.210602] thinkpad_acpi: unknown parameter 'brigthtness_enable' ignored [ 14.212184] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 14.212185] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 14.212186] thinkpad_acpi: ThinkPad BIOS 6NET64WW (1.27 ), EC 6MHT38WW-1.13 [ 14.212186] thinkpad_acpi: Lenovo ThinkPad W510, model 4389W1B [ 14.214118] thinkpad_acpi: radio switch found; radios are enabled [ 14.214151] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 14.214152] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 14.217541] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 14.220656] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 14.223055] thinkpad_acpi: battery 1 registered (start 0, stop 0) [ 14.223062] battery: new extension: ThinkPad Battery Extension [ 14.223149] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9 [ 14.448952] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) [ 14.674565] Intel(R) Wireless WiFi driver for Linux [ 14.674567] Copyright(c) 2003- 2015 Intel Corporation [ 14.675082] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 14.695997] snd_hda_intel 0000:01:00.1: Disabling MSI [ 14.696016] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 14.816706] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 14.816830] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000-4.ucode [ 14.817041] iwlwifi 0000:03:00.0: loaded firmware version XXX.XXX.XXX.XXX build 25532 op_mode iwldvm [ 14.887553] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing. [ 14.888455] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 14.888456] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.888458] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) [ 14.888459] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 14.888460] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 14.888462] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 [ 14.888463] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b [ 14.888464] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a [ 14.890745] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 14.895195] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.895318] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 14.895438] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 14.895547] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 15.486372] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 15.486375] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 15.486376] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 15.486378] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 [ 15.584576] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 15.781700] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 16.198474] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14 [ 16.198594] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15 [ 16.198705] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16 [ 16.198816] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input17 [ 16.254211] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 16.406025] Bluetooth: Core ver 2.22 [ 16.406056] NET: Registered protocol family 31 [ 16.406058] Bluetooth: HCI device and connection manager initialized [ 16.406062] Bluetooth: HCI socket layer initialized [ 16.406065] Bluetooth: L2CAP socket layer initialized [ 16.406081] Bluetooth: SCO socket layer initialized [ 16.745627] Adding 6397948k swap on /dev/sda6. Priority:-2 extents:1 across:6397948k FS [ 16.782716] usbcore: registered new interface driver btusb [ 16.792291] media: Linux media interface: v0.10 [ 16.888483] videodev: Linux video capture interface: v2.00 [ 17.134913] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f) [ 17.140017] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18 [ 17.140130] usbcore: registered new interface driver uvcvideo [ 17.140131] USB Video Class driver (1.1.1) [ 18.613523] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem [ 18.961038] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 21.466382] thinkpad_ec: thinkpad_ec 0.43 loaded. [ 21.504842] hdaps: LENOVO ThinkPad W510 detected, setting orientation 7 [ 21.504963] hdaps: initial mode latch is 0x05 [ 21.505155] hdaps: setting ec_rate=250, filter_order=2 [ 21.505372] hdaps: device successfully initialized. [ 21.505490] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input19 [ 21.505719] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input20 [ 21.505843] hdaps: driver successfully loaded. [ 21.712577] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than pnp 00:00 [mem 0x000c8000-0x000cbfff] [ 21.712704] caller _nv000788rm+0xe4/0x1c0 [nvidia] mapping multiple BARs [ 22.062117] applesmc: supported laptop not found! [ 22.062119] applesmc: driver init failed (ret=-19)! [ 23.192637] acer_wmi: Acer Laptop ACPI-WMI Extras [ 23.192649] acer_wmi: No or unsupported WMI interface, unable to load [ 24.614897] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.614898] Bluetooth: BNEP filters: protocol multicast [ 24.614902] Bluetooth: BNEP socket layer initialized [ 28.514114] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 28.742109] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 28.750594] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 28.757683] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 29.005487] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 29.109710] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 29.131738] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 29.380658] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 29.483276] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 29.804431] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 30.681020] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than pnp 00:00 [mem 0x000c8000-0x000cbfff] [ 30.681164] caller _nv000788rm+0xe4/0x1c0 [nvidia] mapping multiple BARs [ 32.973241] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 33.222106] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 33.327151] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 36.589384] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [ 36.637832] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 36.640836] wlp3s0: authenticated [ 36.645622] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 36.653037] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 36.657852] wlp3s0: associated [ 38.456843] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 39.366180] mmc0: new high speed SDHC card at address b368 [ 39.504534] mmcblk0: mmc0:b368 SD 3.76 GiB [ 39.506003] mmcblk0: p1 [ 46.828311] tp_smapi 0.43 loading... [ 46.828506] tp_smapi successfully loaded (smapi_port=0xb2). [ 71.129720] CE: hpet increased min_delta_ns to 20115 nsec [ 778.551602] e1000e: enp0s25 NIC Link is Down [ 778.815918] PM: suspend entry (deep) [ 778.815921] PM: Syncing filesystems ... done. [ 780.710817] (NULL device *): firmware: direct-loading firmware iwlwifi-6000-4.ucode [ 780.710920] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 780.713546] OOM killer disabled. [ 780.713547] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 780.714973] Suspending console(s) (use no_console_suspend to debug) [ 780.715525] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 780.715566] hdaps: setting ec_rate=0, filter_order=1 [ 780.715815] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 780.919289] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 780.919850] sd 0:0:0:0: [sda] Stopping disk [ 781.138825] e1000e: EEE TX LPI TIMER: 00000000 [ 781.295187] ACPI: EC: interrupt blocked [ 781.323640] ACPI: Preparing to enter system sleep state S3 [ 781.336565] ACPI: EC: event blocked [ 781.336566] ACPI: EC: EC stopped [ 781.336567] PM: Saving platform NVS memory [ 781.338358] Disabling non-boot CPUs ... [ 781.351636] IRQ 25: no longer affine to CPU1 [ 781.353015] smpboot: CPU 1 is now offline [ 781.383592] IRQ 26: no longer affine to CPU2 [ 781.384643] smpboot: CPU 2 is now offline [ 781.403529] IRQ 27: no longer affine to CPU3 [ 781.404564] smpboot: CPU 3 is now offline [ 781.423509] IRQ 28: no longer affine to CPU4 [ 781.424545] smpboot: CPU 4 is now offline [ 781.440498] smpboot: CPU 5 is now offline [ 781.456748] smpboot: CPU 6 is now offline [ 781.480458] smpboot: CPU 7 is now offline [ 781.483919] ACPI: Low-level resume complete [ 781.483970] ACPI: EC: EC started [ 781.483970] PM: Restoring platform NVS memory [ 781.484705] Enabling non-boot CPUs ... [ 781.484746] x86: Booting SMP configuration: [ 781.484747] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 781.487201] cache: parent cpu1 should not be sleeping [ 781.489861] hpet: hpet3 irq 25 for MSI [ 781.490100] CPU1 is up [ 781.490130] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 781.492557] cache: parent cpu2 should not be sleeping [ 781.495208] hpet: hpet4 irq 26 for MSI [ 781.495344] CPU2 is up [ 781.495371] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 781.497797] cache: parent cpu3 should not be sleeping [ 781.500357] hpet: hpet5 irq 27 for MSI [ 781.500521] CPU3 is up [ 781.500549] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 781.502982] cache: parent cpu4 should not be sleeping [ 781.505633] hpet: hpet6 irq 28 for MSI [ 781.505819] CPU4 is up [ 781.505847] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 781.508276] cache: parent cpu5 should not be sleeping [ 781.511272] CPU5 is up [ 781.511300] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 781.513733] cache: parent cpu6 should not be sleeping [ 781.516558] CPU6 is up [ 781.516585] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 781.519016] cache: parent cpu7 should not be sleeping [ 781.522226] CPU7 is up [ 781.528570] ACPI: Waking up from system sleep state S3 [ 781.551161] ACPI: EC: interrupt unblocked [ 781.572441] sdhci-pci 0000:17:00.0: MMC controller base frequency changed to 50Mhz. [ 781.573386] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 781.618501] ACPI: EC: event unblocked [ 781.627887] sd 0:0:0:0: [sda] Starting disk [ 781.632035] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 781.864815] usb 3-1.5: reset full-speed USB device number 3 using ehci-pci [ 781.864819] usb 1-1.3: reset full-speed USB device number 4 using ehci-pci [ 781.879531] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 781.979290] ata5: SATA link down (SStatus 0 SControl 300) [ 781.980277] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 781.980764] ata6: SATA link down (SStatus 0 SControl 300) [ 781.994816] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 782.064487] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 782.087130] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 782.087406] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 782.098188] ata2.00: configured for UDMA/100 [ 782.132880] sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 782.132929] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 782.133090] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 782.196695] firewire_core 0000:17:00.3: rediscovered device fw0 [ 782.240848] usb 1-1.1: reset low-speed USB device number 3 using ehci-pci [ 782.385441] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [ 782.616799] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [ 782.804722] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci [ 782.922234] hdaps: initial mode latch is 0x05 [ 782.922388] hdaps: setting ec_rate=250, filter_order=2 [ 782.923278] OOM killer enabled. [ 782.923279] Restarting tasks ... done. [ 782.965310] PM: suspend exit [ 784.032607] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 784.292406] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 784.292409] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 784.292410] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 784.296011] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 784.296013] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 784.296015] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 784.297669] ata1.00: configured for UDMA/100 [ 784.630255] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 784.852766] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 784.856002] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 784.862523] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 785.108952] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 785.205865] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 785.224885] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 785.473968] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 785.588464] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 785.673858] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 788.878567] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 789.136682] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 789.249677] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 792.329851] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [ 792.333120] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 792.342261] wlp3s0: authenticated [ 792.344331] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 792.348629] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [ 792.353131] wlp3s0: associated [ 792.867219] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 819.477476] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 819.504445] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 819.752227] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 819.863179] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 819.933925] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 820.183878] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 820.293593] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 826.758768] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 826.782518] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 827.031868] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 827.138615] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 900.210317] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 900.457701] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 900.558466] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 900.633767] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 903.860882] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 904.109855] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 904.239782] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 907.330453] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [ 907.332642] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 907.337405] wlp3s0: authenticated [ 907.341078] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 907.345387] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 907.349114] wlp3s0: associated [ 907.901630] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 910.313267] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 910.343434] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 910.593248] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 910.695833] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 910.767034] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 911.016135] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 911.120655] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 914.188540] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [ 914.223903] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 914.308548] wlp3s0: authenticated [ 914.312968] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 914.314643] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=2) [ 914.322002] wlp3s0: associated [ 914.421877] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 1339.494064] CE: hpet4 increased min_delta_ns to 20115 nsec [ 1418.472005] CE: hpet5 increased min_delta_ns to 20115 nsec [ 1812.739209] CE: hpet6 increased min_delta_ns to 20115 nsec [ 1813.647184] hrtimer: interrupt took 28475 ns [ 7868.726408] CE: hpet2 increased min_delta_ns to 20115 nsec [ 7965.488215] CE: hpet3 increased min_delta_ns to 20115 nsec [41844.408867] e1000e: enp0s25 NIC Link is Down [41844.657991] PM: suspend entry (deep) [41844.657994] PM: Syncing filesystems ... done. [41846.750477] (NULL device *): firmware: direct-loading firmware iwlwifi-6000-4.ucode [41846.750518] Freezing user space processes ... (elapsed 0.003 seconds) done. [41846.753571] OOM killer disabled. [41846.753572] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [41846.755061] Suspending console(s) (use no_console_suspend to debug) [41846.755700] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [41846.755759] hdaps: setting ec_rate=0, filter_order=1 [41846.756002] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [41846.948213] sd 0:0:0:0: [sda] Synchronizing SCSI cache [41846.948786] sd 0:0:0:0: [sda] Stopping disk [41847.168152] e1000e: EEE TX LPI TIMER: 00000000 [41847.328833] ACPI: EC: interrupt blocked [41847.352959] ACPI: Preparing to enter system sleep state S3 [41847.365062] ACPI: EC: event blocked [41847.365063] ACPI: EC: EC stopped [41847.365064] PM: Saving platform NVS memory [41847.366915] Disabling non-boot CPUs ... [41847.380352] IRQ 25: no longer affine to CPU1 [41847.381382] smpboot: CPU 1 is now offline [41847.396322] IRQ 26: no longer affine to CPU2 [41847.397684] smpboot: CPU 2 is now offline [41847.428255] IRQ 27: no longer affine to CPU3 [41847.429272] smpboot: CPU 3 is now offline [41847.448234] IRQ 28: no longer affine to CPU4 [41847.449255] smpboot: CPU 4 is now offline [41847.469169] smpboot: CPU 5 is now offline [41847.485389] smpboot: CPU 6 is now offline [41847.501078] smpboot: CPU 7 is now offline [41847.504490] ACPI: Low-level resume complete [41847.504545] ACPI: EC: EC started [41847.504546] PM: Restoring platform NVS memory [41847.505267] Enabling non-boot CPUs ... [41847.505309] x86: Booting SMP configuration: [41847.505310] smpboot: Booting Node 0 Processor 1 APIC 0x1 [41847.507794] cache: parent cpu1 should not be sleeping [41847.509435] hpet: hpet3 irq 25 for MSI [41847.509677] CPU1 is up [41847.509707] smpboot: Booting Node 0 Processor 2 APIC 0x2 [41847.512136] cache: parent cpu2 should not be sleeping [41847.513740] hpet: hpet4 irq 26 for MSI [41847.513879] CPU2 is up [41847.513907] smpboot: Booting Node 0 Processor 3 APIC 0x3 [41847.516333] cache: parent cpu3 should not be sleeping [41847.517949] hpet: hpet5 irq 27 for MSI [41847.518117] CPU3 is up [41847.518146] smpboot: Booting Node 0 Processor 4 APIC 0x4 [41847.520575] cache: parent cpu4 should not be sleeping [41847.522280] hpet: hpet6 irq 28 for MSI [41847.522466] CPU4 is up [41847.522494] smpboot: Booting Node 0 Processor 5 APIC 0x5 [41847.524920] cache: parent cpu5 should not be sleeping [41847.526827] CPU5 is up [41847.526856] smpboot: Booting Node 0 Processor 6 APIC 0x6 [41847.529293] cache: parent cpu6 should not be sleeping [41847.531104] CPU6 is up [41847.531133] smpboot: Booting Node 0 Processor 7 APIC 0x7 [41847.533571] cache: parent cpu7 should not be sleeping [41847.535414] CPU7 is up [41847.541761] ACPI: Waking up from system sleep state S3 [41847.572176] ACPI: EC: interrupt unblocked [41847.594909] sdhci-pci 0000:17:00.0: MMC controller base frequency changed to 50Mhz. [41847.595132] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [41847.707342] sd 0:0:0:0: [sda] Starting disk [41847.707982] ACPI: EC: event unblocked [41847.713858] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [41847.953528] usb 3-1.5: reset full-speed USB device number 3 using ehci-pci [41847.953616] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [41847.960242] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [41848.056823] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [41848.056962] ata5: SATA link down (SStatus 0 SControl 300) [41848.056999] ata6: SATA link down (SStatus 0 SControl 300) [41848.071463] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [41848.140937] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [41848.145369] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci [41848.163691] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [41848.163980] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [41848.174746] ata2.00: configured for UDMA/100 [41848.217602] sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [41848.221588] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [41848.221654] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [41848.281482] firewire_core 0000:17:00.3: rediscovered device fw0 [41848.345523] usb 1-1.3: reset full-speed USB device number 4 using ehci-pci [41848.469655] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [41848.615157] hdaps: initial mode latch is 0x05 [41848.615320] hdaps: setting ec_rate=250, filter_order=2 [41848.721391] usb 1-1.1: reset low-speed USB device number 3 using ehci-pci [41849.023346] OOM killer enabled. [41849.023349] Restarting tasks ... done. [41849.094132] PM: suspend exit [41850.041376] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [41850.284649] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [41850.284654] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [41850.284657] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [41850.288305] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [41850.288309] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [41850.288312] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [41850.289944] ata1.00: configured for UDMA/100 [41850.758938] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [41850.982199] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [41850.987173] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [41850.993720] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [41851.242399] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [41851.335248] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [41851.357565] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [41851.604857] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [41851.694598] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [41851.760332] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [41854.883121] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [41855.132474] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [41855.222030] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [41858.376402] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [41858.379824] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [41858.392208] wlp3s0: authenticated [41858.397305] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [41858.398839] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [41858.404333] wlp3s0: associated [41858.506257] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [42597.375247] e1000e: enp0s25 NIC Link is Down [42598.030582] PM: suspend entry (deep) [42598.030586] PM: Syncing filesystems ... done. [42599.964262] (NULL device *): firmware: direct-loading firmware iwlwifi-6000-4.ucode [42599.964314] Freezing user space processes ... (elapsed 0.003 seconds) done. [42599.967531] OOM killer disabled. [42599.967533] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [42599.969074] Suspending console(s) (use no_console_suspend to debug) [42599.969721] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [42599.969775] hdaps: setting ec_rate=0, filter_order=1 [42599.970200] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [42600.171111] sd 0:0:0:0: [sda] Synchronizing SCSI cache [42600.317893] sd 0:0:0:0: [sda] Stopping disk [42600.388454] e1000e: EEE TX LPI TIMER: 00000000 [42600.701496] ACPI: EC: interrupt blocked [42600.731530] ACPI: Preparing to enter system sleep state S3 [42600.745291] ACPI: EC: event blocked [42600.745292] ACPI: EC: EC stopped [42600.745294] PM: Saving platform NVS memory [42600.747404] Disabling non-boot CPUs ... [42600.763596] IRQ 25: no longer affine to CPU1 [42600.765031] smpboot: CPU 1 is now offline [42600.787551] IRQ 26: no longer affine to CPU2 [42600.788576] smpboot: CPU 2 is now offline [42600.803469] IRQ 27: no longer affine to CPU3 [42600.804491] smpboot: CPU 3 is now offline [42600.819448] IRQ 28: no longer affine to CPU4 [42600.820471] smpboot: CPU 4 is now offline [42600.836378] smpboot: CPU 5 is now offline [42600.852624] smpboot: CPU 6 is now offline [42600.868274] smpboot: CPU 7 is now offline [42600.871360] ACPI: Low-level resume complete [42600.871407] ACPI: EC: EC started [42600.871408] PM: Restoring platform NVS memory [42600.872156] Enabling non-boot CPUs ... [42600.872196] x86: Booting SMP configuration: [42600.872197] smpboot: Booting Node 0 Processor 1 APIC 0x1 [42600.874689] cache: parent cpu1 should not be sleeping [42600.877603] hpet: hpet3 irq 25 for MSI [42600.877846] CPU1 is up [42600.877875] smpboot: Booting Node 0 Processor 2 APIC 0x2 [42600.880307] cache: parent cpu2 should not be sleeping [42600.883178] hpet: hpet4 irq 26 for MSI [42600.883315] CPU2 is up [42600.883343] smpboot: Booting Node 0 Processor 3 APIC 0x3 [42600.885819] cache: parent cpu3 should not be sleeping [42600.887840] hpet: hpet5 irq 27 for MSI [42600.888060] CPU3 is up [42600.888088] smpboot: Booting Node 0 Processor 4 APIC 0x4 [42600.890520] cache: parent cpu4 should not be sleeping [42600.892617] hpet: hpet6 irq 28 for MSI [42600.892807] CPU4 is up [42600.892836] smpboot: Booting Node 0 Processor 5 APIC 0x5 [42600.895268] cache: parent cpu5 should not be sleeping [42600.897559] CPU5 is up [42600.897587] smpboot: Booting Node 0 Processor 6 APIC 0x6 [42600.900019] cache: parent cpu6 should not be sleeping [42600.902322] CPU6 is up [42600.902349] smpboot: Booting Node 0 Processor 7 APIC 0x7 [42600.904784] cache: parent cpu7 should not be sleeping [42600.907077] CPU7 is up [42600.913357] ACPI: Waking up from system sleep state S3 [42600.937883] ACPI: EC: interrupt unblocked [42600.962557] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [42600.962727] sdhci-pci 0000:17:00.0: MMC controller base frequency changed to 50Mhz. [42601.042575] ACPI: EC: event unblocked [42601.042772] sd 0:0:0:0: [sda] Starting disk [42601.055798] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [42601.288690] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci [42601.288695] usb 3-1.5: reset full-speed USB device number 3 using ehci-pci [42601.310374] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [42601.395524] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [42601.395733] ata5: SATA link down (SStatus 0 SControl 300) [42601.396776] ata6: SATA link down (SStatus 0 SControl 300) [42601.409857] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [42601.480105] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [42601.503013] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [42601.503365] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [42601.513940] ata2.00: configured for UDMA/100 [42601.560699] sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [42601.564739] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [42601.564800] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [42601.624780] firewire_core 0000:17:00.3: rediscovered device fw0 [42601.672766] usb 1-1.1: reset low-speed USB device number 3 using ehci-pci [42601.816062] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [42601.963798] hdaps: initial mode latch is 0x05 [42601.964014] hdaps: setting ec_rate=250, filter_order=2 [42602.048785] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [42602.236759] usb 1-1.3: reset full-speed USB device number 4 using ehci-pci [42602.347037] OOM killer enabled. [42602.347039] Restarting tasks ... done. [42602.388845] thinkpad_acpi: battery 1 registered (start 0, stop 0) [42602.396568] PM: suspend exit [42603.392687] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [42603.621917] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [42603.621919] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [42603.621921] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [42603.625553] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [42603.625556] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [42603.625558] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [42603.627211] ata1.00: configured for UDMA/100 [42604.004415] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [42604.228997] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [42604.234942] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [42604.247688] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [42604.500052] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [42604.587245] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [42604.614637] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [42604.863558] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [42604.955098] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [42605.036788] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [42608.343265] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [42608.600878] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [42608.688230] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [42611.855261] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [42611.858436] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [42611.890381] wlp3s0: authenticated [42611.892603] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [42611.894110] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [42611.900838] wlp3s0: associated [42612.002048] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [46396.797660] CE: hpet6 increased min_delta_ns to 20115 nsec [50164.252378] CE: hpet4 increased min_delta_ns to 20115 nsec [61767.995332] CE: hpet3 increased min_delta_ns to 20115 nsec [64588.280092] CE: hpet5 increased min_delta_ns to 20115 nsec [76479.301377] e1000e: enp0s25 NIC Link is Down [76479.540005] PM: suspend entry (deep) [76479.540008] PM: Syncing filesystems ... done. [76481.756666] (NULL device *): firmware: direct-loading firmware iwlwifi-6000-4.ucode [76481.756690] Freezing user space processes ... (elapsed 0.003 seconds) done. [76481.759747] OOM killer disabled. [76481.759749] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [76481.761246] Suspending console(s) (use no_console_suspend to debug) [76481.761858] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [76481.761919] hdaps: setting ec_rate=0, filter_order=1 [76481.762390] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [76481.958715] sd 0:0:0:0: [sda] Synchronizing SCSI cache [76481.959342] sd 0:0:0:0: [sda] Stopping disk [76482.177432] e1000e: EEE TX LPI TIMER: 00000000 [76482.337742] ACPI: EC: interrupt blocked [76482.366826] ACPI: Preparing to enter system sleep state S3 [76482.379273] ACPI: EC: event blocked [76482.379275] ACPI: EC: EC stopped [76482.379276] PM: Saving platform NVS memory [76482.381115] Disabling non-boot CPUs ... [76482.395238] IRQ 25: no longer affine to CPU1 [76482.396267] smpboot: CPU 1 is now offline [76482.415191] IRQ 26: no longer affine to CPU2 [76482.416216] smpboot: CPU 2 is now offline [76482.439129] IRQ 27: no longer affine to CPU3 [76482.440150] smpboot: CPU 3 is now offline [76482.463121] IRQ 28: no longer affine to CPU4 [76482.464150] smpboot: CPU 4 is now offline [76482.488036] smpboot: CPU 5 is now offline [76482.512295] smpboot: CPU 6 is now offline [76482.535945] smpboot: CPU 7 is now offline [76482.539301] ACPI: Low-level resume complete [76482.539353] ACPI: EC: EC started [76482.539354] PM: Restoring platform NVS memory [76482.540090] Enabling non-boot CPUs ... [76482.540132] x86: Booting SMP configuration: [76482.540134] smpboot: Booting Node 0 Processor 1 APIC 0x1 [76482.542623] cache: parent cpu1 should not be sleeping [76482.545299] hpet: hpet3 irq 25 for MSI [76482.545540] CPU1 is up [76482.545571] smpboot: Booting Node 0 Processor 2 APIC 0x2 [76482.547998] cache: parent cpu2 should not be sleeping [76482.550649] hpet: hpet4 irq 26 for MSI [76482.550787] CPU2 is up [76482.550815] smpboot: Booting Node 0 Processor 3 APIC 0x3 [76482.553245] cache: parent cpu3 should not be sleeping [76482.555901] hpet: hpet5 irq 27 for MSI [76482.556070] CPU3 is up [76482.556098] smpboot: Booting Node 0 Processor 4 APIC 0x4 [76482.558533] cache: parent cpu4 should not be sleeping [76482.561194] hpet: hpet6 irq 28 for MSI [76482.561383] CPU4 is up [76482.561412] smpboot: Booting Node 0 Processor 5 APIC 0x5 [76482.563838] cache: parent cpu5 should not be sleeping [76482.566739] CPU5 is up [76482.566768] smpboot: Booting Node 0 Processor 6 APIC 0x6 [76482.569207] cache: parent cpu6 should not be sleeping [76482.572113] CPU6 is up [76482.572139] smpboot: Booting Node 0 Processor 7 APIC 0x7 [76482.574571] cache: parent cpu7 should not be sleeping [76482.577393] CPU7 is up [76482.583739] ACPI: Waking up from system sleep state S3 [76482.605751] ACPI: EC: interrupt unblocked [76482.629612] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [76482.629911] sdhci-pci 0000:17:00.0: MMC controller base frequency changed to 50Mhz. [76482.669614] ACPI: EC: event unblocked [76482.669996] sd 0:0:0:0: [sda] Starting disk [76482.682806] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [76482.916288] usb 1-1.3: reset full-speed USB device number 4 using ehci-pci [76482.916335] usb 3-1.5: reset full-speed USB device number 3 using ehci-pci [76482.931230] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [76483.023503] ata5: SATA link down (SStatus 0 SControl 300) [76483.024109] ata6: SATA link down (SStatus 0 SControl 300) [76483.024369] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [76483.038987] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [76483.104384] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [76483.108993] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [76483.131668] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [76483.132009] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [76483.142586] ata2.00: configured for UDMA/100 [76483.204426] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [76483.204526] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [76483.208410] sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [76483.236306] firewire_core 0000:17:00.3: rediscovered device fw0 [76483.435597] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [76483.480357] usb 1-1.1: reset low-speed USB device number 3 using ehci-pci [76483.856431] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci [76483.974162] hdaps: initial mode latch is 0x05 [76483.974310] hdaps: setting ec_rate=250, filter_order=2 [76483.975188] OOM killer enabled. [76483.975188] Restarting tasks ... done. [76484.028754] thinkpad_acpi: battery 1 registered (start 0, stop 0) [76484.036446] PM: suspend exit [76485.132324] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [76485.346621] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [76485.346625] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [76485.346628] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [76485.350418] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [76485.350422] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [76485.350424] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [76485.352076] ata1.00: configured for UDMA/100 [76485.660338] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [76485.884402] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [76485.887881] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [76485.894372] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [76486.136663] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [76486.222819] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [76486.244043] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [76486.491468] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [76486.581339] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [76486.655218] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [76489.841007] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [76490.097065] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [76490.187805] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [76493.355189] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [76493.358227] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [76493.448089] wlp3s0: authenticated [76493.452198] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [76493.453868] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [76493.461276] wlp3s0: associated [76493.561297] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [76811.479430] CE: hpet4 increased min_delta_ns to 20115 nsec [77948.876650] CE: hpet5 increased min_delta_ns to 20115 nsec [83089.363213] CE: hpet3 increased min_delta_ns to 20115 nsec [83132.763057] CE: hpet6 increased min_delta_ns to 20115 nsec [137405.625346] e1000e: enp0s25 NIC Link is Down [137405.880511] PM: suspend entry (deep) [137405.880515] PM: Syncing filesystems ... done. [137408.089982] (NULL device *): firmware: direct-loading firmware iwlwifi-6000-4.ucode [137408.090076] Freezing user space processes ... (elapsed 0.003 seconds) done. [137408.093160] OOM killer disabled. [137408.093161] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [137408.094668] Suspending console(s) (use no_console_suspend to debug) [137408.095284] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [137408.095337] hdaps: setting ec_rate=0, filter_order=1 [137408.095731] wlp3s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [137408.288529] sd 0:0:0:0: [sda] Synchronizing SCSI cache [137408.289149] sd 0:0:0:0: [sda] Stopping disk [137408.508133] e1000e: EEE TX LPI TIMER: 00000000 [137408.667825] ACPI: EC: interrupt blocked [137408.693515] ACPI: Preparing to enter system sleep state S3 [137408.705836] ACPI: EC: event blocked [137408.705838] ACPI: EC: EC stopped [137408.705839] PM: Saving platform NVS memory [137408.707517] Disabling non-boot CPUs ... [137408.720981] IRQ 25: no longer affine to CPU1 [137408.722327] smpboot: CPU 1 is now offline [137408.744926] IRQ 26: no longer affine to CPU2 [137408.745945] smpboot: CPU 2 is now offline [137408.760886] IRQ 27: no longer affine to CPU3 [137408.761902] smpboot: CPU 3 is now offline [137408.776865] IRQ 28: no longer affine to CPU4 [137408.777882] smpboot: CPU 4 is now offline [137408.793799] smpboot: CPU 5 is now offline [137408.810060] smpboot: CPU 6 is now offline [137408.833747] smpboot: CPU 7 is now offline [137408.837260] ACPI: Low-level resume complete [137408.837317] ACPI: EC: EC started [137408.837317] PM: Restoring platform NVS memory [137408.838091] Enabling non-boot CPUs ... [137408.838132] x86: Booting SMP configuration: [137408.838133] smpboot: Booting Node 0 Processor 1 APIC 0x1 [137408.840593] cache: parent cpu1 should not be sleeping [137408.843423] hpet: hpet3 irq 25 for MSI [137408.843671] CPU1 is up [137408.843701] smpboot: Booting Node 0 Processor 2 APIC 0x2 [137408.846183] cache: parent cpu2 should not be sleeping [137408.848892] hpet: hpet4 irq 26 for MSI [137408.849037] CPU2 is up [137408.849065] smpboot: Booting Node 0 Processor 3 APIC 0x3 [137408.851489] cache: parent cpu3 should not be sleeping [137408.854325] hpet: hpet5 irq 27 for MSI [137408.854501] CPU3 is up [137408.854530] smpboot: Booting Node 0 Processor 4 APIC 0x4 [137408.856964] cache: parent cpu4 should not be sleeping [137408.859610] hpet: hpet6 irq 28 for MSI [137408.859807] CPU4 is up [137408.859836] smpboot: Booting Node 0 Processor 5 APIC 0x5 [137408.862266] cache: parent cpu5 should not be sleeping [137408.865090] CPU5 is up [137408.865118] smpboot: Booting Node 0 Processor 6 APIC 0x6 [137408.867553] cache: parent cpu6 should not be sleeping [137408.870443] CPU6 is up [137408.870472] smpboot: Booting Node 0 Processor 7 APIC 0x7 [137408.872910] cache: parent cpu7 should not be sleeping [137408.875813] CPU7 is up [137408.882187] ACPI: Waking up from system sleep state S3 [137408.904142] ACPI: EC: interrupt unblocked [137408.927568] sdhci-pci 0000:17:00.0: MMC controller base frequency changed to 50Mhz. [137408.928195] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [137408.967612] ACPI: EC: event unblocked [137408.968118] sd 0:0:0:0: [sda] Starting disk [137408.981386] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [137409.214183] usb 3-1.5: reset full-speed USB device number 3 using ehci-pci [137409.229319] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [137409.317288] ata5: SATA link down (SStatus 0 SControl 300) [137409.317329] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [137409.318121] ata6: SATA link down (SStatus 0 SControl 300) [137409.333516] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [137409.402296] usb 1-1.1: reset low-speed USB device number 3 using ehci-pci [137409.403484] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [137409.425995] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [137409.426343] ata2.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [137409.436844] ata2.00: configured for UDMA/100 [137409.478155] sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [137409.478252] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [137409.478355] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [137409.542076] firewire_core 0000:17:00.3: rediscovered device fw0 [137409.735616] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [137409.778209] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci [137409.895821] hdaps: initial mode latch is 0x05 [137409.896014] hdaps: setting ec_rate=250, filter_order=2 [137409.970167] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [137410.158258] usb 1-1.3: reset full-speed USB device number 4 using ehci-pci [137410.269021] OOM killer enabled. [137410.269023] Restarting tasks ... done. [137410.314533] PM: suspend exit [137411.438117] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [137411.664511] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [137411.664514] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [137411.664516] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [137411.668117] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [137411.668120] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [137411.668122] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [137411.669774] ata1.00: configured for UDMA/100 [137412.034117] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [137412.258274] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [137412.262119] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [137412.268627] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [137412.514274] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [137412.599546] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [137412.620979] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [137412.866493] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [137412.951340] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [137413.039336] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [137416.214823] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [137416.461224] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [137416.551368] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [137419.818149] wlp3s0: authenticate with XX:XX:XX:XX:XX:XX [137419.821307] wlp3s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [137419.918160] wlp3s0: authenticated [137419.922143] wlp3s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [137419.923680] wlp3s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [137419.929958] wlp3s0: associated [137420.030547] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [137466.001959] CE: hpet5 increased min_delta_ns to 20115 nsec [137855.317128] CE: hpet6 increased min_delta_ns to 20115 nsec [143379.858305] CE: hpet3 increased min_delta_ns to 20115 nsec [147792.537339] CE: hpet4 increased min_delta_ns to 20115 nsec [161989.332253] st: Version 20160209, fixed bufsize 32768, s/g segs 256


Hardware for Linux and BSD

GitHub