[ 0.000000] Linux version 6.11.5+bpo-amd64 (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.11.5+bpo-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf09fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf0a000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] DMI: Memory slots populated: 4/4 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.251 MHz processor [ 0.002610] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002614] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008925] AGP: No AGP bridge found [ 0.008984] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008990] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008993] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010768] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010778] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.016256] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 0.016876] RAMDISK: [mem 0x28649000-0x3031bfff] ACPI: Early table checksum verification disabled [ 0.016888] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.016894] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016900] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.016906] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240322/tbfadt-611) [ 0.016912] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.016916] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.016920] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.016924] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016928] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.016932] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.016936] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.016940] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.016944] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.016948] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 0.017033] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd3000-0x63effdfff] Zone ranges: [ 0.017440] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 0.017448] Movable zone start for each node [ 0.017451] Early memory node ranges [ 0.017452] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bdf09fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017515] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.027438] On node 0, zone DMA32: 3871 pages in unavailable ranges [ 0.027465] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.027480] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.028397] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028461] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.028687] ACPI: PM-Timer IO Port: 0x808 [ 0.028698] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.028725] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.028729] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.028732] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028734] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.028739] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028740] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.028750] CPU topo: Max. logical packages: 1 [ 0.028752] CPU topo: Max. logical dies: 1 [ 0.028752] CPU topo: Max. dies per package: 1 [ 0.028758] CPU topo: Max. threads per core: 1 [ 0.028760] CPU topo: Num. cores per package: 8 [ 0.028761] CPU topo: Num. threads per package: 8 [ 0.028761] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.028781] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf0a000-0xbe4e2fff] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.028817] Booting paravirtualized kernel on bare hardware [ 0.028819] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034432] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.035599] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 0.035608] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 0.035611] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.035635] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.11.5+bpo-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.035711] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.11.5+bpo-amd64", will be passed to user space. [ 0.042292] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.045621] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.045716] Fallback order for Node 0: 0 [ 0.045722] Built 1 zonelists, mobility grouping on. Total pages: 6279895 [ 0.045723] Policy zone: Normal [ 0.045735] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.045737] AGP: Checking aperture... [ 0.052063] AGP: No AGP bridge found [ 0.052065] AGP: Node 0: aperture [bus addr 0x34d8000000-0x34d9ffffff] (32MB) [ 0.052067] Aperture beyond 4GB. Ignoring. [ 0.052068] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.052069] AGP: Please enable the IOMMU option in the BIOS setup [ 0.052070] AGP: This costs you 64MB of RAM [ 0.052073] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.052076] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 0.108550] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.108766] ftrace: allocating 45176 entries in 177 pages [ 0.122590] ftrace: allocated 177 pages with 4 groups [ 0.123818] Dynamic Preempt: voluntary [ 0.124064] rcu: Preemptible hierarchical RCU implementation. [ 0.124066] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.124067] Trampoline variant of Tasks RCU enabled. [ 0.124068] Rude variant of Tasks RCU enabled. [ 0.124069] Tracing variant of Tasks RCU enabled. [ 0.124070] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.124071] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.124082] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.124085] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.124087] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.128623] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.128843] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.128945] spurious 8259A interrupt: IRQ7. [ 0.132267] Console: colour VGA+ 80x25 [ 0.132270] printk: legacy console [tty0] enabled [ 0.132537] ACPI: Core revision 20240322 [ 0.132706] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.132720] APIC: Switch to symmetric I/O mode setup [ 0.133069] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.152721] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c9660598b8, max_idle_ns: 440795272874 ns [ 0.152728] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.50 BogoMIPS (lpj=12373004) [ 0.152759] LVT offset 1 assigned for vector 0xf9 [ 0.152765] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.152767] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.152772] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.152775] Spectre V2 : Mitigation: Retpolines [ 0.152776] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.152777] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.152778] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.152780] RETBleed: Mitigation: untrained return thunk [ 0.152782] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.152784] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.152789] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.152791] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.152792] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.152794] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.152796] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.183153] Freeing SMP alternatives memory: 40K [ 0.183159] pid_max: default: 32768 minimum: 301 [ 0.184000] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ima,evm [ 0.184245] landlock: Up and running. [ 0.184246] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.184284] AppArmor: AppArmor initialized [ 0.184286] TOMOYO Linux initialized [ 0.184293] LSM support for eBPF active [ 0.184675] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.184761] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.298740] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.299109] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.299138] ... version: 0 [ 0.299139] ... bit width: 48 [ 0.299140] ... generic registers: 6 [ 0.299141] ... value mask: 0000ffffffffffff [ 0.299143] ... max period: 00007fffffffffff [ 0.299144] ... fixed-purpose events: 0 [ 0.299145] ... event mask: 000000000000003f [ 0.299269] signal: max sigframe size: 1776 [ 0.299331] rcu: Hierarchical SRCU implementation. [ 0.299333] rcu: Max phase no-delay instances is 1000. [ 0.299404] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.300724] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.300724] smp: Bringing up secondary CPUs ... [ 0.300855] smpboot: x86: Booting SMP configuration: [ 0.300856] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.332784] smp: Brought up 1 node, 8 CPUs [ 0.332784] smpboot: Total of 8 processors activated (49492.01 BogoMIPS) [ 0.388766] node 0 deferred pages initialised in 52ms [ 0.388774] Memory: 24361476K/25119580K available (16384K kernel code, 2431K rwdata, 11136K rodata, 4136K init, 5240K bss, 750176K reserved, 0K cma-reserved) [ 0.390310] devtmpfs: initialized [ 0.390310] x86/mm: Memory block size: 128MB [ 0.395401] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.395401] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.395401] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.395401] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.395401] pinctrl core: initialized pinctrl subsystem [ 0.397508] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.398347] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.399064] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.399805] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.399848] thermal_sys: Registered thermal governor 'fair_share' [ 0.399848] thermal_sys: Registered thermal governor 'bang_bang' [ 0.399848] thermal_sys: Registered thermal governor 'step_wise' [ 0.399848] thermal_sys: Registered thermal governor 'user_space' [ 0.399848] thermal_sys: Registered thermal governor 'power_allocator' [ 0.399848] cpuidle: using governor ladder [ 0.399848] cpuidle: using governor menu [ 0.399848] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.399848] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved) [ 0.399848] PCI: Using configuration type 1 for base access [ 0.399848] PCI: Using configuration type 1 for extended access [ 0.400775] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.400776] mtrr: probably your BIOS does not setup all CPUs. [ 0.400777] mtrr: corrected configuration. [ 0.400830] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.402750] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.402750] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.402750] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.402750] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.405745] ACPI: Added _OSI(Module Device) [ 0.405745] ACPI: Added _OSI(Processor Device) [ 0.405745] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.405745] ACPI: Added _OSI(Processor Aggregator Device) [ 0.409664] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.424983] ACPI: Interpreter enabled [ 0.425002] ACPI: PM: (supports S0 S3 S4 S5) [ 0.425004] ACPI: Using IOAPIC for interrupt routing [ 0.425149] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.425205] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.425207] PCI: Using E820 reservations for host bridge windows [ 0.425354] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.435436] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.435442] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.435817] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 conventional PCI endpoint [ 0.435980] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 PCIe Root Port [ 0.435993] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:02.0: enabling Extended Tags [ 0.436037] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.436133] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 PCIe Root Port [ 0.436146] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:04.0: enabling Extended Tags [ 0.436185] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.436282] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 PCIe Root Port [ 0.436294] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:05.0: enabling Extended Tags [ 0.436335] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.436427] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 PCIe Root Port [ 0.436439] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:06.0: enabling Extended Tags [ 0.436476] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.436572] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.436584] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:09.0: enabling Extended Tags [ 0.436623] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.436716] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.436739] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:0a.0: enabling Extended Tags [ 0.436779] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.436885] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.436899] pci 0000:00:11.0: BAR 0 [io 0xf090-0xf097] pci 0000:00:11.0: BAR 1 [io 0xf080-0xf083] pci 0000:00:11.0: BAR 2 [io 0xf070-0xf077] pci 0000:00:11.0: BAR 3 [io 0xf060-0xf063] pci 0000:00:11.0: BAR 4 [io 0xf050-0xf05f] pci 0000:00:11.0: BAR 5 [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:11.0: set SATA to AHCI mode [ 0.437081] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.437095] pci 0000:00:12.0: BAR 0 [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.437241] pci 0000:00:12.2: BAR 0 [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.437303] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.437390] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.437404] pci 0000:00:13.0: BAR 0 [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.437543] pci 0000:00:13.2: BAR 0 [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.437605] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.437704] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.437840] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.437854] pci 0000:00:14.1: BAR 0 [io 0xf040-0xf047] pci 0000:00:14.1: BAR 1 [io 0xf030-0xf033] pci 0000:00:14.1: BAR 2 [io 0xf020-0xf027] pci 0000:00:14.1: BAR 3 [io 0xf010-0xf013] pci 0000:00:14.1: BAR 4 [io 0xf000-0xf00f] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.437901] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.437903] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.437905] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.437990] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint [ 0.438007] pci 0000:00:14.2: BAR 0 [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.438162] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.438309] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.438333] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.438339] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.438450] pci 0000:00:14.5: BAR 0 [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.438584] pci 0000:00:16.0: BAR 0 [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.438724] pci 0000:00:16.2: BAR 0 [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.438787] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.438872] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.438930] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.438988] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.439041] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.439098] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.439160] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.439258] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.439272] pci 0000:01:00.0: BAR 0 [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: BAR 2 [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: BAR 4 [io 0xe000-0xe0ff] pci 0000:01:00.0: BAR 5 [mem 0xfea00000-0xfea3ffff] pci 0000:01:00.0: ROM [mem 0xfea40000-0xfea5ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.439333] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.439408] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.439468] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x8 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.439558] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 PCIe Legacy Endpoint [ 0.439573] pci 0000:01:00.1: BAR 0 [mem 0xfea60000-0xfea63fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.439647] pci 0000:01:00.1: supports D1 D2 [ 0.439742] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:02:00.0: [1b4b:91a0] type 00 class 0x01018f PCIe Legacy Endpoint [ 0.439802] pci 0000:02:00.0: BAR 0 [io 0xd090-0xd097] pci 0000:02:00.0: BAR 1 [io 0xd080-0xd083] pci 0000:02:00.0: BAR 2 [io 0xd070-0xd077] pci 0000:02:00.0: BAR 3 [io 0xd060-0xd063] pci 0000:02:00.0: BAR 4 [io 0xd050-0xd05f] pci 0000:02:00.0: BAR 5 [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: ROM [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.439878] pci 0000:02:00.0: PME# supported from D3hot [ 0.439961] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.440025] pci 0000:03:00.0: BAR 0 [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 0.440107] pci 0000:03:00.0: supports D1 D2 [ 0.440109] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.440208] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.440276] pci 0000:04:00.0: BAR 0 [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.440358] pci 0000:04:00.0: supports D1 D2 [ 0.440359] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.440458] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 PCIe Endpoint [ 0.440534] pci 0000:05:00.0: BAR 0 [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: BAR 2 [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 0.440646] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.440758] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 PCIe Legacy Endpoint [ 0.440774] pci 0000:05:00.1: BAR 0 [io 0xc140-0xc147] pci 0000:05:00.1: BAR 1 [io 0xc130-0xc133] pci 0000:05:00.1: BAR 2 [io 0xc120-0xc127] pci 0000:05:00.1: BAR 3 [io 0xc110-0xc113] pci 0000:05:00.1: BAR 4 [io 0xc100-0xc10f] pci 0000:05:00.1: ROM [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 0.440877] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.452750] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 PCIe Endpoint [ 0.452854] pci 0000:06:00.0: BAR 0 [mem 0xd0310000-0xd031ffff 64bit pref] pci 0000:06:00.0: BAR 2 [mem 0xd0300000-0xd030ffff 64bit pref] pci 0000:06:00.0: ROM [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.453129] pci 0000:00:0a.0: PCI bridge to [bus 06] pci_bus 0000:07: extended config space not accessible [ 0.453181] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 conventional PCI endpoint [ 0.453200] pci 0000:07:06.0: BAR 0 [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 0.453359] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.453367] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.453369] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.453371] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.453373] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.453375] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.453377] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.454181] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.454241] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.454303] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.454363] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.454414] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.454454] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.454494] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.454534] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.454725] iommu: Default domain type: Translated [ 0.454725] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.454725] pps_core: LinuxPPS API ver. 1 registered [ 0.454725] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.454725] PTP clock support registered [ 0.454725] EDAC MC: Ver: 3.0.0 [ 0.454725] NetLabel: Initializing [ 0.454725] NetLabel: domain hash size = 128 [ 0.454725] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.454725] NetLabel: unlabeled traffic allowed by default [ 0.454725] PCI: Using ACPI for IRQ routing [ 0.461770] PCI: pci_cache_line_size set to 64 bytes [ 0.461832] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf0a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.461864] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.461864] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.461864] vgaarb: loaded [ 0.461864] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.461864] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.462893] clocksource: Switched to clocksource tsc-early [ 0.462900] VFS: Disk quotas dquot_6.6.0 [ 0.462900] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.462900] AppArmor: AppArmor Filesystem Enabled [ 0.462900] pnp: PnP ACPI init [ 0.462900] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.462900] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.462900] system 00:03: [io 0x040b] has been reserved [ 0.462900] system 00:03: [io 0x04d6] has been reserved [ 0.462900] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.462900] system 00:03: [io 0x0c14] has been reserved [ 0.462900] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.462900] system 00:03: [io 0x0c52] has been reserved [ 0.462900] system 00:03: [io 0x0c6c] has been reserved [ 0.462900] system 00:03: [io 0x0c6f] has been reserved [ 0.462900] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.462900] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.462900] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.462900] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.462900] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.462900] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.462900] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.462900] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.462900] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.462900] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.462900] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.462900] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.462900] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.462900] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.462900] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.462900] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.462900] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.462900] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.462900] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.463375] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 0.470817] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.471130] NET: Registered PF_INET protocol family [ 0.471514] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.489765] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.489826] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.490183] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.490820] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.491107] TCP: Hash tables configured (established 262144 bind 65536) [ 0.491436] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.491617] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.491758] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.491899] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.491916] NET: Registered PF_XDP protocol family [ 0.491940] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 27332 usecs [ 0.540150] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 19332 usecs [ 0.560148] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 19337 usecs [ 0.580148] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 19520 usecs [ 0.580389] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.580746] PCI: CLS 64 bytes, default 64 [ 0.580843] Trying to unpack rootfs image as initramfs... [ 0.581541] PCI-DMA: Disabling AGP. [ 0.581616] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.581618] PCI-DMA: using GART IOMMU. [ 0.581620] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.582491] software IO TLB: tearing down default memory pool [ 0.584970] LVT offset 0 assigned for vector 0x400 [ 0.585105] perf: AMD IBS detected (0x000000ff) [ 0.589240] amd_uncore: 4 amd_nb counters detected [ 0.590222] Initialise system trusted keyrings [ 0.590236] Key type blacklist registered [ 0.590310] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.590320] zbud: loaded [ 0.590742] fuse: init (API version 7.40) [ 0.591093] integrity: Platform Keyring initialized [ 0.591099] integrity: Machine keyring initialized [ 0.608771] Key type asymmetric registered [ 0.608773] Asymmetric key parser 'x509' registered [ 1.603930] tsc: Refined TSC clocksource calibration: 3093.293 MHz [ 1.603957] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9687aa1e0, max_idle_ns: 440795267939 ns [ 1.603991] clocksource: Switched to clocksource tsc [ 1.675081] Freeing initrd memory: 127820K [ 1.681706] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.681779] io scheduler mq-deadline registered [ 1.684796] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.684988] ACPI: \_PR_.P001: Found 2 idle states [ 1.685074] ACPI: \_PR_.P002: Found 2 idle states [ 1.685163] ACPI: \_PR_.P003: Found 2 idle states [ 1.685304] ACPI: \_PR_.P004: Found 2 idle states [ 1.685433] ACPI: \_PR_.P005: Found 2 idle states [ 1.685572] ACPI: \_PR_.P006: Found 2 idle states [ 1.685671] ACPI: \_PR_.P007: Found 2 idle states [ 1.685791] ACPI: \_PR_.P008: Found 2 idle states [ 1.686209] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.686398] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.687304] Linux agpgart interface v0.103 [ 1.688245] i8042: PNP: No PS/2 controller found. [ 1.688330] mousedev: PS/2 mouse device common for all mice [ 1.688356] rtc_cmos 00:06: RTC can wake from S4 [ 1.688565] rtc_cmos 00:06: registered as rtc0 [ 1.688588] rtc_cmos 00:06: setting system clock to 2024-12-13T11:06:05 UTC (1734087965) [ 1.688621] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.688633] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.688808] ledtrig-cpu: registered to indicate activity on CPUs [ 1.689373] NET: Registered PF_INET6 protocol family [ 1.694996] Segment Routing with IPv6 [ 1.695015] In-situ OAM (IOAM) with IPv6 [ 1.695039] mip6: Mobile IPv6 [ 1.695044] NET: Registered PF_PACKET protocol family [ 1.695104] mpls_gso: MPLS GSO support [ 1.695117] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.695614] microcode: Current revision: 0x0600063e [ 1.695616] microcode: Updated early from: 0x06000626 [ 1.695760] IPI shorthand broadcast: enabled [ 1.698302] sched_clock: Marking stable (1692003179, 3860683)->(1713225349, -17361487) [ 1.698606] registered taskstats version 1 [ 1.698776] Loading compiled-in X.509 certificates [ 1.726597] Loaded X.509 cert 'Build time autogenerated kernel key: bffebb35c9065925e3b2ba6063b8020c5a36de11' [ 1.729583] Demotion targets for Node 0: null [ 1.729778] Key type .fscrypt registered [ 1.729779] Key type fscrypt-provisioning registered [ 1.739226] cryptd: max_cpu_qlen set to 1000 [ 1.747565] AES CTR mode by8 optimization enabled [ 1.787773] Key type encrypted registered [ 1.787780] AppArmor: AppArmor sha256 policy hashing enabled [ 1.787790] ima: No TPM chip found, activating TPM-bypass! [ 1.787794] ima: Allocated hash algorithm: sha256 [ 1.787806] ima: No architecture policies found [ 1.787823] evm: Initialising EVM extended attributes: [ 1.787824] evm: security.selinux [ 1.787825] evm: security.SMACK64 (disabled) [ 1.787826] evm: security.SMACK64EXEC (disabled) [ 1.787828] evm: security.SMACK64TRANSMUTE (disabled) [ 1.787829] evm: security.SMACK64MMAP (disabled) [ 1.787829] evm: security.apparmor [ 1.787830] evm: security.ima [ 1.787831] evm: security.capability [ 1.787832] evm: HMAC attrs: 0x1 [ 2.015827] RAS: Correctable Errors collector initialized. [ 2.030190] clk: Disabling unused clocks [ 2.030194] PM: genpd: Disabling unused power domains [ 2.033688] Freeing unused decrypted memory: 2028K [ 2.034786] Freeing unused kernel image (initmem) memory: 4136K [ 2.034811] Write protecting the kernel read-only data: 28672k [ 2.035470] Freeing unused kernel image (rodata/data gap) memory: 1152K [ 2.101026] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.101032] Run /init as init process [ 2.101033] with arguments: [ 2.101035] /init [ 2.101036] splash [ 2.101037] with environment: [ 2.101038] HOME=/ [ 2.101039] TERM=linux [ 2.101040] BOOT_IMAGE=/boot/vmlinuz-6.11.5+bpo-amd64 [ 2.351650] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.351698] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.367043] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.367057] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 2.367727] Floppy drive(s): fd0 is 1.44M [ 2.368000] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 2.368135] ACPI: button: Power Button [PWRF] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 2.379826] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 2.380504] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 2.380623] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.383346] SCSI subsystem initialized [ 2.385886] FDC 0 is a post-1991 82077 [ 2.402379] ACPI: bus type USB registered [ 2.402427] usbcore: registered new interface driver usbfs [ 2.402448] usbcore: registered new interface driver hub [ 2.402468] usbcore: registered new device driver usb [ 2.432841] ACPI: bus type drm_connector registered [ 2.447318] libata version 3.00 loaded. [ 2.448860] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 2.448868] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.448871] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] QUIRK: Enable AMD PLL fix [ 2.449598] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.449606] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.449614] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.449623] ehci-pci 0000:00:12.2: debug port 1 [ 2.449674] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.451151] pata_via 0000:05:00.1: version 0.3.4 [ 2.451929] scsi host0: pata_via [ 2.452224] scsi host1: pata_via [ 2.452285] ata1: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 34 lpm-pol 0 [ 2.452289] ata2: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 34 lpm-pol 0 [ 2.454494] scsi host2: pata_atiixp [ 2.454670] scsi host3: pata_atiixp [ 2.454752] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 lpm-pol 0 [ 2.454755] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 lpm-pol 0 [ 2.463903] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.463969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.463973] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.463976] usb usb1: Product: EHCI Host Controller [ 2.463977] usb usb1: Manufacturer: Linux 6.11.5+bpo-amd64 ehci_hcd [ 2.463979] usb usb1: SerialNumber: ... [ 2.464155] hub 1-0:1.0: USB hub found [ 2.464173] hub 1-0:1.0: 5 ports detected [ 2.464425] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.464432] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.464438] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.464447] ehci-pci 0000:00:13.2: debug port 1 [ 2.464479] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.483885] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.483957] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.483961] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.483963] usb usb2: Product: EHCI Host Controller [ 2.483965] usb usb2: Manufacturer: Linux 6.11.5+bpo-amd64 ehci_hcd [ 2.483966] usb usb2: SerialNumber: ... [ 2.484112] hub 2-0:1.0: USB hub found [ 2.484121] hub 2-0:1.0: 5 ports detected [ 2.484323] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.484329] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.484332] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.484340] ehci-pci 0000:00:16.2: debug port 1 [ 2.484367] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.499972] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.500114] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.500118] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.500120] usb usb3: Product: EHCI Host Controller [ 2.500122] usb usb3: Manufacturer: Linux 6.11.5+bpo-amd64 ehci_hcd [ 2.500123] usb usb3: SerialNumber: ... [ 2.500272] hub 3-0:1.0: USB hub found [ 2.500280] hub 3-0:1.0: 4 ports detected [ 2.523950] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.625062] ata3.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.625067] ata3.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.625073] ata3.01: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.625077] ata3.00: limited to UDMA/33 due to 40-wire cable [ 2.625078] ata3.01: limited to UDMA/33 due to 40-wire cable [ 2.739970] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.755969] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 2.784310] scsi 2:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.785549] scsi 2:0:1:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 2.826211] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.828374] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.828384] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 2.828557] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080090 [ 2.828765] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.828770] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.828775] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.828920] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.828976] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.828980] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.828983] usb usb4: Product: xHCI Host Controller [ 2.828985] usb usb4: Manufacturer: Linux 6.11.5+bpo-amd64 xhci-hcd [ 2.828987] usb usb4: SerialNumber: ... [ 2.829890] hub 4-0:1.0: USB hub found [ 2.829906] hub 4-0:1.0: 2 ports detected [ 2.830067] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.830099] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.830131] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.830171] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11 [ 2.830175] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.830178] usb usb5: Product: xHCI Host Controller [ 2.830181] usb usb5: Manufacturer: Linux 6.11.5+bpo-amd64 xhci-hcd [ 2.830183] usb usb5: SerialNumber: ... [ 2.830389] hub 5-0:1.0: USB hub found [ 2.830404] hub 5-0:1.0: 2 ports detected [ 2.830769] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.830776] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.830840] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080090 [ 2.831087] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.831093] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 2.831098] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.831184] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.831189] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.831192] usb usb7: Product: xHCI Host Controller [ 2.831196] usb usb7: Manufacturer: Linux 6.11.5+bpo-amd64 xhci-hcd [ 2.831198] usb usb7: SerialNumber: ... [ 2.831279] ahci 0000:00:11.0: version 3.0 [ 2.831501] ahci 0000:00:11.0: AHCI vers 0001.0200, 32 command slots, 6 Gbps, SATA mode [ 2.831506] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 2.831508] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.832248] hub 7-0:1.0: USB hub found [ 2.832265] hub 7-0:1.0: 2 ports detected [ 2.832461] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.832523] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11 [ 2.832528] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.832530] usb usb8: Product: xHCI Host Controller [ 2.832533] usb usb8: Manufacturer: Linux 6.11.5+bpo-amd64 xhci-hcd [ 2.832535] usb usb8: SerialNumber: ... [ 2.832678] scsi host4: ahci [ 2.832853] hub 8-0:1.0: USB hub found [ 2.832889] hub 8-0:1.0: 2 ports detected [ 2.833040] scsi host5: ahci [ 2.833476] scsi host6: ahci [ 2.835519] scsi host7: ahci [ 2.835640] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 lpm-pol 3 [ 2.835645] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 lpm-pol 3 [ 2.835648] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 lpm-pol 3 [ 2.835651] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 lpm-pol 3 [ 2.836009] ahci 0000:02:00.0: AHCI vers 0001.0000, 32 command slots, 6 Gbps, IDE mode [ 2.836015] ahci 0000:02:00.0: 2/2 ports implemented (port mask 0x3) [ 2.836018] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.838159] sd 2:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.838174] sd 2:0:0:0: [sda] Write Protect is off [ 2.838178] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.838198] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.838234] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.838716] scsi host8: ahci [ 2.839410] scsi host9: ahci [ 2.839563] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 lpm-pol 0 [ 2.839567] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 lpm-pol 0 [ 2.876313] sda: sda1 sda2 sda3 [ 2.876540] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.892271] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.892277] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.892280] usb usb6: Product: OHCI PCI host controller [ 2.892281] usb usb6: Manufacturer: Linux 6.11.5+bpo-amd64 ohci_hcd [ 2.892283] usb usb6: SerialNumber: ... [ 2.892522] hub 6-0:1.0: USB hub found [ 2.892535] hub 6-0:1.0: 5 ports detected [ 2.893145] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.893152] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.893174] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.924716] usb 3-1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 2.924721] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.924724] usb 3-1: Product: 802.11n NIC [ 2.924725] usb 3-1: Manufacturer: Realtek [ 2.924727] usb 3-1: SerialNumber: ... [ 2.943105] sr 2:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.943115] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.956114] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.956120] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.956122] usb usb9: Product: OHCI PCI host controller [ 2.956124] usb usb9: Manufacturer: Linux 6.11.5+bpo-amd64 ohci_hcd [ 2.956126] usb usb9: SerialNumber: ... [ 2.956416] hub 9-0:1.0: USB hub found [ 2.956428] hub 9-0:1.0: 5 ports detected [ 2.956940] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.956947] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.956969] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 3.008759] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 3.020128] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 3.020133] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.020136] usb usb10: Product: OHCI PCI host controller [ 3.020138] usb usb10: Manufacturer: Linux 6.11.5+bpo-amd64 ohci_hcd [ 3.020140] usb usb10: SerialNumber: ... [ 3.020364] hub 10-0:1.0: USB hub found [ 3.020376] hub 10-0:1.0: 2 ports detected [ 3.020812] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 3.020819] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 3.020840] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 3.044299] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 3.084018] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 3.084024] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.084027] usb usb11: Product: OHCI PCI host controller [ 3.084029] usb usb11: Manufacturer: Linux 6.11.5+bpo-amd64 ohci_hcd [ 3.084030] usb usb11: SerialNumber: ... [ 3.084255] hub 11-0:1.0: USB hub found [ 3.084268] hub 11-0:1.0: 4 ports detected [ 3.120436] usb 2-1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 3.120441] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.120444] usb 2-1: SerialNumber: ... [ 3.151665] ata7: SATA link down (SStatus 0 SControl 300) [ 3.155850] ata10: SATA link down (SStatus 0 SControl 330) [ 3.168046] usb 6-1: new full-speed USB device number 2 using ohci-pci [ 3.312001] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.312054] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.312088] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.312219] ata6.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 3.312246] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 3.312350] ata6.00: configured for UDMA/133 [ 3.313313] ata5.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 3.313960] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.313985] ata8.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 3.314902] ata8.00: configured for UDMA/133 [ 3.315419] ata5.00: configured for UDMA/133 [ 3.315666] scsi 4:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5 [ 3.315985] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 3.316131] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.316134] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 3.316146] sd 4:0:0:0: [sdb] Write Protect is off [ 3.316149] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.316166] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.316198] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.317135] ata9.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 3.317418] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.318935] ata9.00: configured for UDMA/133 [ 3.322626] scsi 5:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 3.322999] sd 5:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.323021] sd 5:0:0:0: [sdc] Write Protect is off [ 3.323024] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.323041] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.323071] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 3.329506] scsi 7:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 3.336340] sdc: sdc1 sdc2 [ 3.336561] sd 5:0:0:0: [sdc] Attached SCSI disk [ 3.367168] usb 6-1: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 3.367180] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.367187] usb 6-1: Product: USB Device [ 3.367191] usb 6-1: Manufacturer: COMPANY [ 3.424497] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.474301] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 3.474514] scsi 8:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.474875] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.474879] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 3.474892] sd 8:0:0:0: [sdd] Write Protect is off [ 3.474895] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.474912] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.474942] sd 8:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 3.475973] usb 9-2: new low-speed USB device number 2 using ohci-pci [ 3.506863] sdd: sdd1 sdd2 [ 3.507121] sd 8:0:0:0: [sdd] Attached SCSI disk [ 3.867968] usb 6-2: new full-speed USB device number 3 using ohci-pci [ 4.069136] usb 6-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 4.069149] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.069155] usb 6-2: Product: A4Tech Gaming Mouse [ 4.069159] usb 6-2: Manufacturer: PixArt [ 4.288268] sdb: sdb1 sdb2 sdb3 [ 4.288623] sd 4:0:0:0: [sdb] Attached SCSI disk [ 4.312306] hid: raw HID events driver (C) Jiri Kosina [ 4.340246] usbcore: registered new interface driver usbhid [ 4.340251] usbhid: USB HID core driver [ 4.343449] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:09DA:FAA8.0001/input/input2 [ 4.731886] usb 1-5: new high-speed USB device number 4 using ehci-pci [ 4.892471] usb 1-5: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 4.892478] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 4.892738] hub 1-5:1.0: USB hub found [ 4.892819] hub 1-5:1.0: 2 ports detected [ 4.912109] hid-generic 0003:09DA:FAA8.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input0 [ 4.912288] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.1/0003:09DA:FAA8.0002/input/input3 [ 4.912387] hid-generic 0003:09DA:FAA8.0002: input,hidraw1: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-1/input1 [ 4.912725] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input4 [ 4.972096] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input5 [ 4.972248] hid-generic 0003:09DA:FAA8.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input2 [ 4.972426] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:09DA:3519.0004/input/input6 [ 4.972518] hid-generic 0003:09DA:3519.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input0 [ 4.972844] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:09DA:3519.0005/input/input8 [ 5.032142] hid-generic 0003:09DA:3519.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input1 [ 5.048065] usb 9-2: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 5.048072] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.048075] usb 9-2: Product: NOVA AVR [ 5.048077] usb 9-2: Manufacturer: MGE UPS SYSTEMS [ 7.581072] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:13.0-2/input0 [ 8.543656] [drm] amdgpu kernel modesetting enabled. [ 8.543793] amdgpu: Virtual CRAT table created for CPU [ 8.543809] amdgpu: Topology: Add CPU node [ 8.544155] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 8.544181] [drm] register mmio base: 0xFEA00000 [ 8.544183] [drm] register mmio size: 262144 [ 8.544252] [drm] add ip block number 0 <vi_common> [ 8.544254] [drm] add ip block number 1 <gmc_v8_0> [ 8.544255] [drm] add ip block number 2 <tonga_ih> [ 8.544257] [drm] add ip block number 3 <gfx_v8_0> [ 8.544258] [drm] add ip block number 4 <sdma_v3_0> [ 8.544259] [drm] add ip block number 5 <powerplay> [ 8.544261] [drm] add ip block number 6 <dm> [ 8.544262] [drm] add ip block number 7 <uvd_v6_0> [ 8.544263] [drm] add ip block number 8 <vce_v3_0> [ 8.544448] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 8.544497] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 8.544500] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 8.544830] [drm] UVD is enabled in VM mode [ 8.544832] [drm] UVD ENC is enabled in VM mode [ 8.544834] [drm] VCE enabled in VM mode [ 8.544871] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 8.545930] Console: switching to colour dummy device 80x25 [ 8.545934] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 8.545944] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 8.545969] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 8.546257] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 8.546261] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 8.546266] [drm] Detected VRAM RAM=8192M, BAR=256M [ 8.546268] [drm] RAM width 256bits GDDR5 [ 8.546490] [drm] amdgpu: 8192M of VRAM memory ready [ 8.546493] [drm] amdgpu: 11997M of GTT memory ready. [ 8.546511] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 8.546884] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 8.548104] [drm] Chained IB support enabled! [ 8.553532] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 8.556679] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 8.559071] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 8.873426] [drm] Display Core v3.2.291 initialized on DCE 11.2 [ 8.935183] [drm] UVD and UVD ENC initialized successfully. [ 9.045112] [drm] VCE initialized successfully. [ 9.045177] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 9.045191] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 9.048870] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 9.049756] [drm] Initialized amdgpu 3.59.0 for 0000:01:00.0 on minor 0 [ 9.065620] fbcon: amdgpudrmfb (fb0) is primary device [ 9.147483] Console: switching to colour frame buffer device 160x64 [ 9.164626] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 9.323940] raid6: sse2x4 gen() 12281 MB/s [ 9.391939] raid6: sse2x2 gen() 11505 MB/s [ 9.459940] raid6: sse2x1 gen() 7843 MB/s [ 9.459942] raid6: using algorithm sse2x4 gen() 12281 MB/s [ 9.527938] raid6: .... xor() 4515 MB/s, rmw enabled [ 9.527941] raid6: using ssse3x2 recovery algorithm [ 9.529789] xor: automatically using best checksumming function avx [ 9.531268] async_tx: api initialized (async) [ 10.351942] random: crng init done [ 10.633727] Btrfs loaded, zoned=yes, fsverity=yes [ 23.484995] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 23.485012] floppy: error 10 while reading block 0 [ 23.853521] EXT4-fs (sda1): mounted filesystem HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro with ordered data mode. Quota mode: none. [ 23.981528] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 24.841371] loop: module loaded [ 24.862723] EXT4-fs (sda1): re-mounted HASH_359-BBF9-D580-BC9E-CA1D262C8B09 r/w. Quota mode: none. [ 24.867517] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 24.867564] device-mapper: uevent: version 1.0.3 [ 24.867674] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 24.918311] lp: driver loaded but no devices found [ 24.924871] ppdev: user-space parallel port driver [ 25.149668] Asymmetric key parser 'pkcs8' registered [ 25.405198] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 25.424414] sr 2:0:1:0: Attached scsi generic sg1 type 5 [ 25.424476] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 25.424535] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 25.425328] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 25.425385] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 25.499565] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 25.499682] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 25.499843] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 25.509628] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 25.840388] acpi_cpufreq: overriding BIOS provided _PSD data [ 25.878499] at24 0-0050: supply vcc not found, using dummy regulator [ 25.883924] at24 0-0050: 256 byte spd EEPROM, read-only [ 25.883971] at24 0-0051: supply vcc not found, using dummy regulator [ 25.885734] at24 0-0051: 256 byte spd EEPROM, read-only [ 25.885767] at24 0-0052: supply vcc not found, using dummy regulator [ 25.887509] at24 0-0052: 256 byte spd EEPROM, read-only [ 25.887551] at24 0-0053: supply vcc not found, using dummy regulator [ 25.889334] at24 0-0053: 256 byte spd EEPROM, read-only [ 25.925045] mc: Linux media interface: v0.10 [ 26.167728] videodev: Linux video capture interface: v2.00 [ 26.259421] kvm_amd: TSC scaling supported [ 26.259428] kvm_amd: Nested Virtualization enabled [ 26.259430] kvm_amd: Nested Paging enabled [ 26.259432] kvm_amd: LBR virtualization supported [ 26.281759] usb 2-1: Found UVC 1.00 device <unnamed> (046d:0825) [ 26.285206] MCE: In-kernel MCE decoding enabled. [ 26.308243] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 26.308419] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 26.308429] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 40000 [ 26.316965] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 26.343247] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 26.364590] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 26.385130] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 26.390428] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 26.390529] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 26.390614] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 26.390711] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 [ 26.407885] Registered IR keymap rc-avermedia-m135a [ 26.413178] usbcore: registered new interface driver uvcvideo [ 26.472102] IR NEC protocol handler initialized [ 26.472604] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 26.472925] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 26.473220] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 26.473517] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 26.473525] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 26.473533] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 26.473537] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 26.473540] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 26.473543] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 26.473545] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 26.473548] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 26.473551] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 26.473553] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 26.473807] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 26.490946] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 26.491041] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 26.491126] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 26.491213] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 26.491309] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 26.491413] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input22 [ 26.491504] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input23 [ 26.491583] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input24 [ 26.500618] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 26.503626] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 26.504168] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 26.675880] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 26.675887] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 26.675891] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 26.675894] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.675896] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 26.675899] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.675901] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.675904] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.675905] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.675907] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.675910] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.675911] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.675914] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.675915] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.675918] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.675920] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 26.735944] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 26.847880] tda829x 13-004b: setting tuner address to 60 [ 26.851637] usb 3-1: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 26.851645] usb 3-1: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 26.851648] usb 3-1: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 26.857155] usb 3-1: Firmware revision 28.0 (signature 0x88e1) [ 26.947978] tda829x 13-004b: type set to tda8290+75a [ 27.443337] usbcore: registered new interface driver rtl8xxxu [ 27.453048] rtl8xxxu 3-1:1.0 wlxd037459855f3: renamed from wlan0 [ 27.819937] usb 2-1: set resolution quirk: cval->res = 384 [ 27.820461] usbcore: registered new interface driver snd-usb-audio [ 31.224656] saa7134: saa7133[0]: registered device video2 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 31.224848] saa7134: saa7133[0]: registered device radio0 [ 31.248081] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 31.248121] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 36.070575] NET: Registered PF_ALG protocol family [ 36.078134] Process accounting resumed [ 36.159548] alg: No test for hmac(md4) (hmac(md4-generic)) [ 36.311228] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 36.834799] rtl8xxxu 3-1:1.0 wlxd037459855f3: renamed from wlan0 (while UP) [ 37.222521] vboxdrv: loading out-of-tree module taints kernel. [ 37.222530] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 37.254843] vboxdrv: Found 8 processor cores/threads [ 37.276070] vboxdrv: TSC mode is Invariant, tentative frequency 3093292895 Hz [ 37.276075] vboxdrv: Successfully loaded version 7.1.4 r165100 (interface 0x00340001) [ 37.497291] VBoxNetFlt: Successfully started. [ 37.516410] VBoxNetAdp: Successfully started. [ 37.746032] NET: Registered PF_QIPCRTR protocol family [ 38.946120] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 38.951406] wlxd037459855f3: authenticate with 6C6DEF9152362CC1FFD2B5D63C0AC627 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 38.951412] wlxd037459855f3: send auth to 6C6DEF9152362CC1FFD2B5D63C0AC627 (try 1/3) [ 38.954288] wlxd037459855f3: authenticated [ 38.955903] wlxd037459855f3: associate with 6C6DEF9152362CC1FFD2B5D63C0AC627 (try 1/3) [ 38.958410] wlxd037459855f3: RX AssocResp from 6C6DEF9152362CC1FFD2B5D63C0AC627 (capab=0x411 status=0 aid=1) [ 38.960145] usb 3-1: rtl8xxxu_bss_info_changed: HT supported [ 38.962397] wlxd037459855f3: associated [ 41.434822] tg3 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full duplex [ 41.434831] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 41.434835] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 42.228011] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 51.664193] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 58.304194] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 100.904789] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 110.113023] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 116.821050] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 847.234014] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 847.285001] JFS: nTxBlock = 8192, nTxLock = 65536 [ 847.371964] QNX4 filesystem 0.2.3 registered. [ 1348.386061] amdgpu 0000:01:00.0: amdgpu: Disabling VM faults because of PRT request! [ 1924.308709] wlxd037459855f3: deauthenticating from 6C6DEF9152362CC1FFD2B5D63C0AC627 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1925.692699] watchdog: watchdog0: watchdog did not stop!