[ 0.000000] Linux version 6.7.12+bpo-amd64 (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.7.12-1~bpo12+1 (2024-05-06) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.7.12+bpo-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf09fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf0a000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.317 MHz processor [ 0.002661] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002665] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008977] AGP: No AGP bridge found [ 0.009036] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.009043] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.009045] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010812] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010822] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.016313] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 0.017189] RAMDISK: [mem 0x2d5bd000-0x32ad5fff] ACPI: Early table checksum verification disabled [ 0.017202] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.017207] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017214] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.017219] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20230628/tbfadt-615) [ 0.017225] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.017229] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.017233] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.017237] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017241] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.017245] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.017248] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.017252] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.017256] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.017260] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 0.017343] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd3000-0x63effdfff] Zone ranges: [ 0.017745] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 0.017753] Movable zone start for each node [ 0.017757] Early memory node ranges [ 0.017758] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bdf09fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017820] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.027844] On node 0, zone DMA32: 3871 pages in unavailable ranges [ 0.027870] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.027884] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.028769] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028829] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.029058] ACPI: PM-Timer IO Port: 0x808 [ 0.029067] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.029076] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.029080] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.029082] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.029085] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.029089] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.029091] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.029096] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.029115] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf0a000-0xbe4e2fff] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.029151] Booting paravirtualized kernel on bare hardware [ 0.029154] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034586] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.035303] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.035312] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.035316] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.035342] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.7.12+bpo-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.035411] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.7.12+bpo-amd64", will be passed to user space. [ 0.042020] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.045365] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.045460] Fallback order for Node 0: 0 [ 0.045466] Built 1 zonelists, mobility grouping on. Total pages: 6181612 [ 0.045468] Policy zone: Normal [ 0.045477] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.045479] AGP: Checking aperture... [ 0.051781] AGP: No AGP bridge found [ 0.051783] AGP: Node 0: aperture [bus addr 0x4dc000000-0x4ddffffff] (32MB) [ 0.051786] Aperture beyond 4GB. Ignoring. [ 0.051786] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.051787] AGP: Please enable the IOMMU option in the BIOS setup [ 0.051788] AGP: This costs you 64MB of RAM [ 0.051791] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.051794] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 0.097852] Memory: 3158908K/25119580K available (16384K kernel code, 2365K rwdata, 10668K rodata, 3992K init, 3568K bss, 707388K reserved, 0K cma-reserved) [ 0.107170] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.107361] ftrace: allocating 43389 entries in 170 pages [ 0.120595] ftrace: allocated 170 pages with 4 groups [ 0.121827] Dynamic Preempt: voluntary [ 0.122063] rcu: Preemptible hierarchical RCU implementation. [ 0.122064] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.122066] Trampoline variant of Tasks RCU enabled. [ 0.122067] Rude variant of Tasks RCU enabled. [ 0.122067] Tracing variant of Tasks RCU enabled. [ 0.122068] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.122069] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.126251] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.126456] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.126558] spurious 8259A interrupt: IRQ7. [ 0.129877] Console: colour VGA+ 80x25 [ 0.129881] printk: legacy console [tty0] enabled [ 0.130146] ACPI: Core revision 20230628 [ 0.130308] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.130322] APIC: Switch to symmetric I/O mode setup [ 0.130674] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.150323] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c969e7a2da, max_idle_ns: 440795330463 ns [ 0.150330] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.63 BogoMIPS (lpj=12373268) [ 0.150354] LVT offset 1 assigned for vector 0xf9 [ 0.150361] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.150363] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.150367] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.150370] Spectre V2 : Mitigation: Retpolines [ 0.150371] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.150372] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.150373] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.150374] RETBleed: Mitigation: untrained return thunk [ 0.150377] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.150379] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.150383] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.150385] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.150386] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.150388] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.150390] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.177477] Freeing SMP alternatives memory: 36K [ 0.177483] pid_max: default: 32768 minimum: 301 [ 0.178356] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity [ 0.178609] landlock: Up and running. [ 0.178611] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.178643] AppArmor: AppArmor initialized [ 0.178645] TOMOYO Linux initialized [ 0.178652] LSM support for eBPF active [ 0.179034] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.179115] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.293105] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.293387] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.293410] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.293437] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.293462] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.293492] ... version: 0 [ 0.293493] ... bit width: 48 [ 0.293495] ... generic registers: 6 [ 0.293496] ... value mask: 0000ffffffffffff [ 0.293497] ... max period: 00007fffffffffff [ 0.293498] ... fixed-purpose events: 0 [ 0.293499] ... event mask: 000000000000003f [ 0.293608] signal: max sigframe size: 1776 [ 0.293674] rcu: Hierarchical SRCU implementation. [ 0.293676] rcu: Max phase no-delay instances is 1000. [ 0.294326] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.294326] smp: Bringing up secondary CPUs ... [ 0.294389] smpboot: x86: Booting SMP configuration: [ 0.294390] .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7 [ 0.324329] smp: Brought up 1 node, 8 CPUs [ 0.324329] smpboot: Max logical packages: 1 [ 0.324329] smpboot: Total of 8 processors activated (49493.07 BogoMIPS) [ 0.382369] node 0 deferred pages initialised in 56ms [ 0.383636] devtmpfs: initialized [ 0.383636] x86/mm: Memory block size: 128MB [ 0.387966] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.387966] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.387966] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.387966] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.387966] pinctrl core: initialized pinctrl subsystem [ 0.388085] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.390615] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.391319] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.392045] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.392411] thermal_sys: Registered thermal governor 'fair_share' [ 0.392411] thermal_sys: Registered thermal governor 'bang_bang' [ 0.392411] thermal_sys: Registered thermal governor 'step_wise' [ 0.392411] thermal_sys: Registered thermal governor 'user_space' [ 0.392411] thermal_sys: Registered thermal governor 'power_allocator' [ 0.392411] cpuidle: using governor ladder [ 0.392411] cpuidle: using governor menu [ 0.392411] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.392411] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.392411] PCI: not using MMCONFIG [ 0.392411] PCI: Using configuration type 1 for base access [ 0.392411] PCI: Using configuration type 1 for extended access [ 0.392411] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.392411] mtrr: probably your BIOS does not setup all CPUs. [ 0.392411] mtrr: corrected configuration. [ 0.392411] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.392411] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392411] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.392411] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392411] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.394612] ACPI: Added _OSI(Module Device) [ 0.394612] ACPI: Added _OSI(Processor Device) [ 0.394612] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.394612] ACPI: Added _OSI(Processor Aggregator Device) [ 0.396769] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.399656] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.399656] ACPI: Interpreter enabled [ 0.399656] ACPI: PM: (supports S0 S3 S4 S5) [ 0.399656] ACPI: Using IOAPIC for interrupt routing [ 0.399656] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.399656] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.399656] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.399656] PCI: Using E820 reservations for host bridge windows [ 0.399656] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.404887] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.404894] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.405314] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.405475] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.405494] pci 0000:00:02.0: enabling Extended Tags [ 0.405518] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.405620] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.405637] pci 0000:00:04.0: enabling Extended Tags [ 0.405661] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.405755] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.405773] pci 0000:00:05.0: enabling Extended Tags [ 0.405796] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.405893] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.405911] pci 0000:00:06.0: enabling Extended Tags [ 0.405935] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.406033] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.406051] pci 0000:00:09.0: enabling Extended Tags [ 0.406074] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.406170] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.406188] pci 0000:00:0a.0: enabling Extended Tags [ 0.406211] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.406318] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.406341] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:11.0: set SATA to AHCI mode [ 0.406531] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.406544] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.406688] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.406751] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.406842] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.406855] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.406995] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.407058] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.407149] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.407275] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.407289] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.407445] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.407583] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.407765] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.407895] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.407909] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.408051] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.408193] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.408256] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.408349] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.408408] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.408463] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.408520] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.408587] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.408640] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.408740] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 [ 0.408755] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.408811] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.408884] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.408943] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.409033] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.409047] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.409120] pci 0000:01:00.1: supports D1 D2 [ 0.409211] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:02:00.0: [1b4b:91a0] type 00 class 0x01018f [ 0.409282] pci 0000:02:00.0: reg 0x10: [io 0xd090-0xd097] pci 0000:02:00.0: reg 0x14: [io 0xd080-0xd083] pci 0000:02:00.0: reg 0x18: [io 0xd070-0xd077] pci 0000:02:00.0: reg 0x1c: [io 0xd060-0xd063] pci 0000:02:00.0: reg 0x20: [io 0xd050-0xd05f] pci 0000:02:00.0: reg 0x24: [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: reg 0x30: [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.409360] pci 0000:02:00.0: PME# supported from D3hot [ 0.409441] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.409510] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 0.409591] pci 0000:03:00.0: supports D1 D2 [ 0.409592] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.409692] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.409763] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.409845] pci 0000:04:00.0: supports D1 D2 [ 0.409847] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.409947] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.410027] pci 0000:05:00.0: reg 0x10: [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 0.410137] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.410254] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 [ 0.410270] pci 0000:05:00.1: reg 0x10: [io 0xc140-0xc147] pci 0000:05:00.1: reg 0x14: [io 0xc130-0xc133] pci 0000:05:00.1: reg 0x18: [io 0xc120-0xc127] pci 0000:05:00.1: reg 0x1c: [io 0xc110-0xc113] pci 0000:05:00.1: reg 0x20: [io 0xc100-0xc10f] pci 0000:05:00.1: reg 0x30: [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 0.410377] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.422351] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 [ 0.422442] pci 0000:06:00.0: reg 0x10: [mem 0xd0310000-0xd031ffff 64bit pref] pci 0000:06:00.0: reg 0x18: [mem 0xd0300000-0xd030ffff 64bit pref] pci 0000:06:00.0: reg 0x30: [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.422711] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: extended config space not accessible [ 0.422767] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 [ 0.422785] pci 0000:07:06.0: reg 0x10: [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 0.422940] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.422946] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.422952] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.422954] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.422956] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.422958] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.422960] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.423822] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.423888] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.423956] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.424023] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.424080] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.424124] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.424167] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.424211] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.426354] iommu: Default domain type: Translated [ 0.426354] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.426544] pps_core: LinuxPPS API ver. 1 registered [ 0.426546] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.426550] PTP clock support registered [ 0.426569] EDAC MC: Ver: 3.0.0 [ 0.426685] NetLabel: Initializing [ 0.426685] NetLabel: domain hash size = 128 [ 0.426685] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.426685] NetLabel: unlabeled traffic allowed by default [ 0.426685] PCI: Using ACPI for IRQ routing [ 0.431533] PCI: pci_cache_line_size set to 64 bytes [ 0.431596] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf0a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.431629] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.431629] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.431629] vgaarb: loaded [ 0.431629] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.431629] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.434329] clocksource: Switched to clocksource tsc-early [ 0.435112] VFS: Disk quotas dquot_6.6.0 [ 0.435189] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.435445] AppArmor: AppArmor Filesystem Enabled [ 0.435463] pnp: PnP ACPI init [ 0.435572] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.435690] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.436083] system 00:03: [io 0x040b] has been reserved [ 0.436087] system 00:03: [io 0x04d6] has been reserved [ 0.436089] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.436091] system 00:03: [io 0x0c14] has been reserved [ 0.436093] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.436095] system 00:03: [io 0x0c52] has been reserved [ 0.436097] system 00:03: [io 0x0c6c] has been reserved [ 0.436099] system 00:03: [io 0x0c6f] has been reserved [ 0.436101] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.436103] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.436105] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.436107] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.436109] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.436111] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.436113] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.436115] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.436117] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.436119] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.436122] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.436125] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.436128] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.436131] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.436133] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.436136] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.436138] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.436247] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.436482] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.437020] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 0.444445] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.444754] NET: Registered PF_INET protocol family [ 0.445121] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.449913] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.449984] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.450327] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.450981] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.451268] TCP: Hash tables configured (established 262144 bind 65536) [ 0.451625] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.451817] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.451957] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.452155] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.452165] NET: Registered PF_XDP protocol family [ 0.452186] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 23946 usecs [ 0.496879] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 19335 usecs [ 0.516878] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 19333 usecs [ 0.536877] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 19519 usecs [ 0.537119] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.537480] PCI: CLS 64 bytes, default 64 [ 0.537568] Trying to unpack rootfs image as initramfs... [ 0.538034] PCI-DMA: Disabling AGP. [ 0.538100] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.538102] PCI-DMA: using GART IOMMU. [ 0.538104] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.538969] software IO TLB: tearing down default memory pool [ 0.541536] LVT offset 0 assigned for vector 0x400 [ 0.546645] perf: AMD IBS detected (0x000000ff) [ 0.547123] amd_uncore: 4 amd_nb counters detected [ 0.547130] amd_uncore: 0 amd_l2 counters detected [ 0.548461] Initialise system trusted keyrings [ 0.548478] Key type blacklist registered [ 0.548542] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.548555] zbud: loaded [ 0.548966] fuse: init (API version 7.39) [ 0.549334] integrity: Platform Keyring initialized [ 0.549345] integrity: Machine keyring initialized [ 0.549347] Key type asymmetric registered [ 0.549349] Asymmetric key parser 'x509' registered [ 1.468222] Freeing initrd memory: 87140K [ 1.474711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.474781] io scheduler mq-deadline registered [ 1.476976] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.477020] ACPI: \_PR_.P001: Found 2 idle states [ 1.477121] ACPI: \_PR_.P002: Found 2 idle states [ 1.477228] ACPI: \_PR_.P003: Found 2 idle states [ 1.477330] ACPI: \_PR_.P004: Found 2 idle states [ 1.477473] ACPI: \_PR_.P005: Found 2 idle states [ 1.477579] ACPI: \_PR_.P006: Found 2 idle states [ 1.477671] ACPI: \_PR_.P007: Found 2 idle states [ 1.477763] ACPI: \_PR_.P008: Found 2 idle states [ 1.478150] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.478363] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.479267] Linux agpgart interface v0.103 [ 1.480253] i8042: PNP: No PS/2 controller found. [ 1.480338] mousedev: PS/2 mouse device common for all mice [ 1.480360] rtc_cmos 00:06: RTC can wake from S4 [ 1.480577] rtc_cmos 00:06: registered as rtc0 [ 1.480601] rtc_cmos 00:06: setting system clock to 2024-07-04T10:06:51 UTC (1720087611) [ 1.480638] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.480650] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.480826] ledtrig-cpu: registered to indicate activity on CPUs [ 1.494695] NET: Registered PF_INET6 protocol family [ 1.500939] Segment Routing with IPv6 [ 1.500956] In-situ OAM (IOAM) with IPv6 [ 1.500981] mip6: Mobile IPv6 [ 1.500986] NET: Registered PF_PACKET protocol family [ 1.501026] mpls_gso: MPLS GSO support [ 1.501042] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.501616] microcode: Current revision: 0x0600063e [ 1.501618] microcode: Updated early from: 0x06000626 [ 1.501770] IPI shorthand broadcast: enabled [ 1.503432] sched_clock: Marking stable (1497902562, 3849964)->(1522079924, -20327398) [ 1.503699] registered taskstats version 1 [ 1.503827] Loading compiled-in X.509 certificates [ 1.531603] Loaded X.509 cert 'Build time autogenerated kernel key: 43de8aa80a227f11d49dc72550bfb28e4b254851' [ 1.534577] Key type .fscrypt registered [ 1.534579] Key type fscrypt-provisioning registered [ 1.544353] cryptd: max_cpu_qlen set to 1000 [ 1.555732] AVX version of gcm_enc/dec engaged. [ 1.555787] AES CTR mode by8 optimization enabled [ 1.576977] tsc: Refined TSC clocksource calibration: 3093.305 MHz [ 1.576998] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9692d4021, max_idle_ns: 440795216934 ns [ 1.577082] clocksource: Switched to clocksource tsc [ 1.596347] Key type encrypted registered [ 1.596352] AppArmor: AppArmor sha1 policy hashing enabled [ 1.596362] ima: No TPM chip found, activating TPM-bypass! [ 1.596364] ima: Allocated hash algorithm: sha256 [ 1.596382] ima: No architecture policies found [ 1.596395] evm: Initialising EVM extended attributes: [ 1.596396] evm: security.selinux [ 1.596398] evm: security.SMACK64 (disabled) [ 1.596399] evm: security.SMACK64EXEC (disabled) [ 1.596400] evm: security.SMACK64TRANSMUTE (disabled) [ 1.596401] evm: security.SMACK64MMAP (disabled) [ 1.596402] evm: security.apparmor [ 1.596403] evm: security.ima [ 1.596404] evm: security.capability [ 1.596405] evm: HMAC attrs: 0x1 [ 1.778547] RAS: Correctable Errors collector initialized. [ 1.778636] clk: Disabling unused clocks [ 1.780916] Freeing unused decrypted memory: 2028K [ 1.781886] Freeing unused kernel image (initmem) memory: 3992K [ 1.781889] Write protecting the kernel read-only data: 28672k [ 1.782634] Freeing unused kernel image (rodata/data gap) memory: 1620K [ 1.845511] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.845517] Run /init as init process [ 1.845518] with arguments: [ 1.845520] /init [ 1.845521] splash [ 1.845522] with environment: [ 1.845523] HOME=/ [ 1.845524] TERM=linux [ 1.845525] BOOT_IMAGE=/boot/vmlinuz-6.7.12+bpo-amd64 [ 2.113965] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.114034] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.125075] Floppy drive(s): fd0 is 1.44M [ 2.125642] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.125652] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 2.125828] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.145998] FDC 0 is a post-1991 82077 [ 2.147212] ACPI: button: Power Button [PWRF] SCSI subsystem initialized [ 2.168901] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 2.168908] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.168912] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] ACPI: bus type USB registered [ 2.170157] usbcore: registered new interface driver usbfs [ 2.170171] usbcore: registered new interface driver hub [ 2.170189] usbcore: registered new device driver usb [ 2.171329] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.201942] ACPI: bus type drm_connector registered [ 2.216958] libata version 3.00 loaded. [ 2.220523] QUIRK: Enable AMD PLL fix [ 2.220554] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.220562] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.220568] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.220577] ehci-pci 0000:00:12.2: debug port 1 [ 2.220618] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.220663] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.239884] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.239957] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.239961] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.239964] usb usb1: Product: EHCI Host Controller [ 2.239966] usb usb1: Manufacturer: Linux 6.7.12+bpo-amd64 ehci_hcd [ 2.239968] usb usb1: SerialNumber: ... [ 2.240140] hub 1-0:1.0: USB hub found [ 2.240149] hub 1-0:1.0: 5 ports detected [ 2.240362] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.240367] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.240371] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.240379] ehci-pci 0000:00:13.2: debug port 1 [ 2.240407] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.255954] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.256092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.256099] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.256102] usb usb2: Product: EHCI Host Controller [ 2.256104] usb usb2: Manufacturer: Linux 6.7.12+bpo-amd64 ehci_hcd [ 2.256105] usb usb2: SerialNumber: ... [ 2.256259] hub 2-0:1.0: USB hub found [ 2.256267] hub 2-0:1.0: 5 ports detected [ 2.256493] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.256503] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.256507] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.256515] ehci-pci 0000:00:16.2: debug port 1 [ 2.256549] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.275880] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.275937] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.275941] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.275944] usb usb3: Product: EHCI Host Controller [ 2.275945] usb usb3: Manufacturer: Linux 6.7.12+bpo-amd64 ehci_hcd [ 2.275947] usb usb3: SerialNumber: ... [ 2.276115] hub 3-0:1.0: USB hub found [ 2.276123] hub 3-0:1.0: 4 ports detected [ 2.280755] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.280768] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 2.280825] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.281106] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.281110] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.281114] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.281250] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.281255] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.281258] usb usb4: Product: xHCI Host Controller [ 2.281260] usb usb4: Manufacturer: Linux 6.7.12+bpo-amd64 xhci-hcd [ 2.281262] usb usb4: SerialNumber: ... [ 2.281282] scsi host0: pata_atiixp [ 2.282407] hub 4-0:1.0: USB hub found [ 2.282420] hub 4-0:1.0: 2 ports detected [ 2.282857] scsi host1: pata_atiixp [ 2.283008] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 lpm-pol 0 [ 2.283012] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 lpm-pol 0 [ 2.283024] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.283082] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 2.283086] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.283090] usb usb5: Product: xHCI Host Controller [ 2.283092] usb usb5: Manufacturer: Linux 6.7.12+bpo-amd64 xhci-hcd [ 2.283094] usb usb5: SerialNumber: ... [ 2.283263] pata_via 0000:05:00.1: version 0.3.4 [ 2.284184] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.284224] hub 5-0:1.0: USB hub found [ 2.284235] hub 5-0:1.0: 2 ports detected [ 2.284387] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.284416] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.284486] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.284492] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.284553] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 2.284793] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.284798] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 2.284802] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.284861] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.284864] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.284868] usb usb7: Product: xHCI Host Controller [ 2.284870] usb usb7: Manufacturer: Linux 6.7.12+bpo-amd64 xhci-hcd [ 2.284872] usb usb7: SerialNumber: ... [ 2.284915] scsi host2: pata_via [ 2.285140] scsi host3: pata_via [ 2.285197] ata3: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 33 lpm-pol 0 [ 2.285200] ata4: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 33 lpm-pol 0 [ 2.285292] hub 7-0:1.0: USB hub found [ 2.285303] hub 7-0:1.0: 2 ports detected [ 2.285544] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.285581] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 2.285585] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.285587] usb usb8: Product: xHCI Host Controller [ 2.285589] usb usb8: Manufacturer: Linux 6.7.12+bpo-amd64 xhci-hcd [ 2.285592] usb usb8: SerialNumber: ... [ 2.285738] hub 8-0:1.0: USB hub found [ 2.285749] hub 8-0:1.0: 2 ports detected [ 2.348005] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.07 [ 2.348010] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.348013] usb usb6: Product: OHCI PCI host controller [ 2.348014] usb usb6: Manufacturer: Linux 6.7.12+bpo-amd64 ohci_hcd [ 2.348016] usb usb6: SerialNumber: ... [ 2.348169] hub 6-0:1.0: USB hub found [ 2.348180] hub 6-0:1.0: 5 ports detected [ 2.348534] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.348540] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.348568] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.412031] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.07 [ 2.412035] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.412037] usb usb9: Product: OHCI PCI host controller [ 2.412039] usb usb9: Manufacturer: Linux 6.7.12+bpo-amd64 ohci_hcd [ 2.412040] usb usb9: SerialNumber: ... [ 2.412315] hub 9-0:1.0: USB hub found [ 2.412334] hub 9-0:1.0: 5 ports detected [ 2.412692] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.412698] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.412719] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.451759] ata1.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.451765] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.451771] ata1.01: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.451775] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.451777] ata1.01: limited to UDMA/33 due to 40-wire cable [ 2.457925] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.459187] scsi 0:0:1:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 2.476004] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.07 [ 2.476009] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.476012] usb usb10: Product: OHCI PCI host controller [ 2.476014] usb usb10: Manufacturer: Linux 6.7.12+bpo-amd64 ohci_hcd [ 2.476016] usb usb10: SerialNumber: ... [ 2.476172] hub 10-0:1.0: USB hub found [ 2.476182] hub 10-0:1.0: 2 ports detected [ 2.476468] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.476474] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.476521] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.539944] usb 3-2: new high-speed USB device number 2 using ehci-pci [ 2.539988] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.07 [ 2.539992] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.539994] usb usb11: Product: OHCI PCI host controller [ 2.539995] usb usb11: Manufacturer: Linux 6.7.12+bpo-amd64 ohci_hcd [ 2.539997] usb usb11: SerialNumber: ... [ 2.540195] hub 11-0:1.0: USB hub found [ 2.540205] hub 11-0:1.0: 4 ports detected [ 2.673322] ahci 0000:00:11.0: version 3.0 [ 2.673584] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.673590] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.688628] scsi host4: ahci [ 2.688978] scsi host5: ahci [ 2.689238] scsi host6: ahci [ 2.689461] scsi host7: ahci [ 2.689557] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 lpm-pol 0 [ 2.689561] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 lpm-pol 0 [ 2.689565] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 lpm-pol 0 [ 2.689568] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 lpm-pol 0 [ 2.689838] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.689843] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.690303] scsi host8: ahci [ 2.690509] scsi host9: ahci [ 2.690593] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 lpm-pol 0 [ 2.690597] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 lpm-pol 0 [ 2.707916] usb 9-1: new low-speed USB device number 2 using ohci-pci [ 2.708770] usb 3-2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 2.708774] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.708776] usb 3-2: Product: 802.11n NIC [ 2.708778] usb 3-2: Manufacturer: Realtek [ 2.708779] usb 3-2: SerialNumber: ... [ 2.752072] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.767829] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.767840] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.808919] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 2.819963] usb 6-1: new full-speed USB device number 2 using ohci-pci [ 3.003796] ata7: SATA link down (SStatus 0 SControl 300) [ 3.003967] ata10: SATA link down (SStatus 0 SControl 330) [ 3.015107] usb 6-1: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 3.015120] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.015126] usb 6-1: Product: USB Device [ 3.015130] usb 6-1: Manufacturer: COMPANY [ 3.032586] hid: raw HID events driver (C) Jiri Kosina [ 3.163966] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.163967] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 3.163999] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.164042] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.164138] ata6.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 3.164167] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 3.164277] ata6.00: configured for UDMA/133 [ 3.165132] ata9.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 3.165409] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.165430] ata5.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 3.165937] ata8.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 3.165963] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.166738] ata8.00: configured for UDMA/133 [ 3.166905] ata9.00: configured for UDMA/133 [ 3.167455] ata5.00: configured for UDMA/133 [ 3.167598] scsi 4:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5 [ 3.168170] scsi 5:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 3.170158] scsi 7:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 3.244279] sr 7:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.278262] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 3.278484] scsi 8:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.283880] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 3.288731] sd 5:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.288733] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.288733] sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.288738] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 3.288739] sd 4:0:0:0: [sdc] 4096-byte physical blocks [ 3.288750] sd 5:0:0:0: [sdb] Write Protect is off [ 3.288754] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.288755] sd 4:0:0:0: [sdc] Write Protect is off [ 3.288755] sd 8:0:0:0: [sdd] Write Protect is off [ 3.288759] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.288759] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.288776] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.288785] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.288785] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.288805] sd 5:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 3.288821] sd 8:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 3.288821] sd 4:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 3.289944] sdb: sdb1 sdb2 [ 3.290075] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3.295348] usbcore: registered new interface driver usbhid [ 3.295352] usbhid: USB HID core driver [ 3.310624] sdd: sdd1 sdd2 [ 3.310784] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 3.424515] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 3.424535] sd 0:0:0:0: [sda] Write Protect is off [ 3.424538] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.424567] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.424607] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 3.426665] sda: sda1 sda2 sda3 [ 3.426996] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.656691] usb 2-2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 3.656704] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.656710] usb 2-2: SerialNumber: ... [ 3.663964] usb 6-2: new full-speed USB device number 3 using ohci-pci [ 3.783956] usb 2-3: new high-speed USB device number 4 using ehci-pci [ 3.865129] usb 6-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.865142] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.865148] usb 6-2: Product: A4Tech Gaming Mouse [ 3.865153] usb 6-2: Manufacturer: PixArt [ 3.880253] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:09DA:FAA8.0001/input/input2 [ 3.940372] hid-generic 0003:09DA:FAA8.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input0 [ 3.940528] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.1/0003:09DA:FAA8.0002/input/input3 [ 3.940624] hid-generic 0003:09DA:FAA8.0002: input,hidraw1: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-1/input1 [ 3.940950] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input4 [ 4.000075] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input5 [ 4.000383] hid-generic 0003:09DA:FAA8.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input2 [ 4.000545] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:09DA:3519.0004/input/input6 [ 4.000629] hid-generic 0003:09DA:3519.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input0 [ 4.000946] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:09DA:3519.0005/input/input8 [ 4.044135] sdc: sdc1 sdc2 sdc3 [ 4.044501] sd 4:0:0:0: [sdc] Attached SCSI disk [ 4.064051] hid-generic 0003:09DA:3519.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input1 [ 4.156711] usb 2-3: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 4.156718] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 4.156721] usb 2-3: SerialNumber: ... [ 4.290211] usb 9-1: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 4.290226] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.290232] usb 9-1: Product: NOVA AVR [ 4.290237] usb 9-1: Manufacturer: MGE UPS SYSTEMS [ 6.824191] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:13.0-1/input0 [ 7.429120] [drm] amdgpu kernel modesetting enabled. [ 7.429256] amdgpu: Virtual CRAT table created for CPU [ 7.429275] amdgpu: Topology: Add CPU node [ 7.429574] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 7.429599] [drm] register mmio base: 0xFEA00000 [ 7.429601] [drm] register mmio size: 262144 [ 7.429671] [drm] add ip block number 0 <vi_common> [ 7.429674] [drm] add ip block number 1 <gmc_v8_0> [ 7.429675] [drm] add ip block number 2 <tonga_ih> [ 7.429677] [drm] add ip block number 3 <gfx_v8_0> [ 7.429679] [drm] add ip block number 4 <sdma_v3_0> [ 7.429681] [drm] add ip block number 5 <powerplay> [ 7.429682] [drm] add ip block number 6 <dm> [ 7.429684] [drm] add ip block number 7 <uvd_v6_0> [ 7.429686] [drm] add ip block number 8 <vce_v3_0> [ 7.429869] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 7.429918] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 7.429921] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 7.429976] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma.bin [ 7.430131] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma1.bin [ 7.430257] [drm] UVD is enabled in VM mode [ 7.430259] [drm] UVD ENC is enabled in VM mode [ 7.430261] [drm] VCE enabled in VM mode [ 7.430295] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 7.431376] Console: switching to colour dummy device 80x25 [ 7.431382] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 7.431385] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 7.431410] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 7.431447] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mc.bin [ 7.431754] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 7.431757] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 7.431763] [drm] Detected VRAM RAM=8192M, BAR=256M [ 7.431764] [drm] RAM width 256bits GDDR5 [ 7.432031] [drm] amdgpu: 8192M of VRAM memory ready [ 7.432034] [drm] amdgpu: 11998M of GTT memory ready. [ 7.432053] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 7.432423] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 7.432562] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_pfp_2.bin [ 7.432748] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_me_2.bin [ 7.432930] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_ce_2.bin [ 7.433017] [drm] Chained IB support enabled! [ 7.433046] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_rlc.bin [ 7.433377] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec_2.bin [ 7.435466] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec2_2.bin [ 7.438304] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 7.438468] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_uvd.bin [ 7.441543] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 7.442186] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_vce.bin [ 7.443448] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 7.444540] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_k_smc.bin [ 7.755092] [drm] Display Core v3.2.259 initialized on DCE 11.2 [ 7.817498] [drm] UVD and UVD ENC initialized successfully. [ 7.927448] [drm] VCE initialized successfully. [ 7.928217] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 7.928231] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 7.932192] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 7.933005] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:01:00.0 on minor 0 [ 7.949180] fbcon: amdgpudrmfb (fb0) is primary device [ 8.028812] Console: switching to colour frame buffer device 160x64 [ 8.046019] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 8.199929] raid6: sse2x4 gen() 12323 MB/s [ 8.267928] raid6: sse2x2 gen() 11390 MB/s [ 8.335929] raid6: sse2x1 gen() 7825 MB/s [ 8.335931] raid6: using algorithm sse2x4 gen() 12323 MB/s [ 8.403929] raid6: .... xor() 4607 MB/s, rmw enabled [ 8.403931] raid6: using ssse3x2 recovery algorithm [ 8.405894] xor: automatically using best checksumming function avx [ 8.407382] async_tx: api initialized (async) [ 9.207932] random: crng init done [ 9.487094] Btrfs loaded, zoned=yes, fsverity=yes [ 22.268370] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 22.268387] floppy: error 10 while reading block 0 [ 22.632426] EXT4-fs (sda1): mounted filesystem HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro with ordered data mode. Quota mode: none. [ 22.751366] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 23.606284] loop: module loaded [ 23.628716] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 23.628772] device-mapper: uevent: version 1.0.3 [ 23.628903] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 23.638616] EXT4-fs (sda1): re-mounted HASH_359-BBF9-D580-BC9E-CA1D262C8B09 r/w. Quota mode: none. [ 23.676673] lp: driver loaded but no devices found [ 23.684185] ppdev: user-space parallel port driver [ 23.859758] Asymmetric key parser 'pkcs8' registered [ 24.076781] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 24.076845] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 24.082968] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 24.094542] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 24.122302] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 24.131758] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 24.222328] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 24.222456] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 24.223092] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 24.234572] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 24.249130] acpi_cpufreq: overriding BIOS provided _PSD data [ 24.639527] mc: Linux media interface: v0.10 [ 24.727719] videodev: Linux video capture interface: v2.00 [ 24.944718] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 24.944873] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 24.944880] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 40000 [ 24.947088] usb 2-2: Found UVC 1.00 device <unnamed> (046d:0825) [ 24.987894] Registered IR keymap rc-avermedia-m135a [ 25.007548] usb 2-3: Found UVC 1.00 device <unnamed> (046d:0825) [ 25.036235] IR NEC protocol handler initialized [ 25.037781] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 25.038109] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 25.038429] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 25.038740] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 25.039058] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 25.051089] usbcore: registered new interface driver uvcvideo [ 25.055869] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 25.064352] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 25.067929] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 25.067984] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 25.068034] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 25.078468] kvm_amd: TSC scaling supported [ 25.078473] kvm_amd: Nested Virtualization enabled [ 25.078475] kvm_amd: Nested Paging enabled [ 25.078483] kvm_amd: LBR virtualization supported [ 25.095591] MCE: In-kernel MCE decoding enabled. [ 25.110797] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 25.136669] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 25.138985] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11 [ 25.139152] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12 [ 25.139276] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13 [ 25.139391] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14 [ 25.139500] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15 [ 25.139604] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16 [ 25.163430] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 25.163436] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 25.163439] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 25.163442] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 25.163444] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 25.163445] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 25.163447] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 25.163449] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 25.163451] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 25.227252] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input17 [ 25.227340] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input18 [ 25.227402] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input19 [ 25.227471] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input20 [ 25.227541] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input21 [ 25.227608] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input22 [ 25.227671] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input23 [ 25.227739] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input24 [ 25.235871] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 25.235877] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 25.235879] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 25.235880] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.235882] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 25.235883] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.235884] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.235886] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.235887] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.235888] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.235889] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.235890] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.235891] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.235893] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.235894] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.235895] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.355874] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 25.467955] tda829x 13-004b: setting tuner address to 60 [ 25.480733] usb 3-2: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 25.480749] usb 3-2: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 25.480756] usb 3-2: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 25.488888] usb 3-2: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin [ 25.489242] usb 3-2: Firmware revision 11.1 (signature 0x88e1) [ 25.571954] tda829x 13-004b: type set to tda8290+75a [ 25.760176] usb 3-2: Firmware failed to start [ 25.760198] rtl8xxxu: probe of 3-2:1.0 failed with error -11 [ 25.760283] usbcore: registered new interface driver rtl8xxxu [ 26.415864] usb 2-2: set resolution quirk: cval->res = 384 [ 27.791954] usb 2-3: set resolution quirk: cval->res = 384 [ 27.792873] usbcore: registered new interface driver snd-usb-audio [ 29.828661] saa7134: saa7133[0]: registered device video4 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 29.828882] saa7134: saa7133[0]: registered device radio0 [ 29.857798] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 29.857884] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 34.636515] NET: Registered PF_ALG protocol family [ 34.744639] Process accounting resumed [ 34.756351] alg: No test for hmac(md4) (hmac(md4-generic)) [ 36.128189] vboxdrv: loading out-of-tree module taints kernel. [ 36.128197] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 36.165935] vboxdrv: Found 8 processor cores/threads [ 36.188057] vboxdrv: TSC mode is Invariant, tentative frequency 3093346283 Hz [ 36.188062] vboxdrv: Successfully loaded version 7.0.18 r162988 (interface 0x00330004) [ 36.321404] NET: Registered PF_QIPCRTR protocol family [ 36.415262] VBoxNetFlt: Successfully started. [ 36.432267] VBoxNetAdp: Successfully started. [ 36.447886] usb 2-2: reset high-speed USB device number 3 using ehci-pci [ 38.132269] tg3 0000:06:00.0 enp6s0: Link is up at 100 Mbps, full duplex [ 38.132277] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 38.132279] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 40.763975] usb 2-3: reset high-speed USB device number 4 using ehci-pci [ 42.947985] rc rc0: two consecutive events of type space [ 175.657736] usb 3-2: USB disconnect, device number 2 [ 177.129779] usb 3-2: new high-speed USB device number 3 using ehci-pci [ 177.294587] usb 3-2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 177.294600] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 177.294606] usb 3-2: Product: 802.11n NIC [ 177.294611] usb 3-2: Manufacturer: Realtek [ 177.294615] usb 3-2: SerialNumber: ... [ 177.438820] usb 3-2: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 177.438835] usb 3-2: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 177.438842] usb 3-2: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 177.438932] usb 3-2: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin [ 177.439301] usb 3-2: Firmware revision 11.1 (signature 0x88e1) [ 178.124591] rtl8xxxu 3-2:1.0 wlxd037459855f3: renamed from wlan1 (while UP) [ 178.373740] warning: `lxpanel' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 179.880569] wlxd037459855f3: authenticate with C23ADE89DD8893CF35F25ACBC4310040 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 179.880574] wlxd037459855f3: send auth to C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 179.885079] wlxd037459855f3: authenticated [ 179.885800] wlxd037459855f3: associate with C23ADE89DD8893CF35F25ACBC4310040 (try 1/3) [ 179.892197] wlxd037459855f3: RX AssocResp from C23ADE89DD8893CF35F25ACBC4310040 (capab=0x1c11 status=0 aid=6) [ 179.893935] usb 3-2: rtl8xxxu_bss_info_changed: HT supported [ 179.896191] wlxd037459855f3: associated [ 179.945227] wlxd037459855f3: Limiting TX power to 20 (20 - 0) dBm as advertised by C23ADE89DD8893CF35F25ACBC4310040 [ 786.305868] amdgpu 0000:01:00.0: amdgpu: Disabling VM faults because of PRT request! [ 1106.815306] wlxd037459855f3: deauthenticating from C23ADE89DD8893CF35F25ACBC4310040 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1108.233137] watchdog: watchdog0: watchdog did not stop!