[ 0.000000] OF: reserved mem: 0x0000000030000000..0x00000000303fffff (4096 KiB) map non-reusable ibm,firmware-code@30000000 [ 0.000000] OF: reserved mem: 0x0000000030400000..0x0000000030ffffff (12288 KiB) map non-reusable ibm,firmware-heap@30400000 [ 0.000000] OF: reserved mem: 0x0000000031000000..0x0000000031bfffff (12288 KiB) map non-reusable ibm,firmware-data@31000000 [ 0.000000] OF: reserved mem: 0x0000000031c00000..0x0000000031cfffff (1024 KiB) map non-reusable ibm,firmware-stacks@31c00000 [ 0.000000] OF: reserved mem: 0x0000000031d00000..0x0000000034341fff (39176 KiB) map non-reusable ibm,firmware-allocs-memory@31d00000 [ 0.000000] OF: reserved mem: 0x00000000f0000000..0x00000000ffffffff (262144 KiB) map non-reusable ibm,hb-rsv-mem@f0000000 [ 0.000000] OF: reserved mem: 0x00000003fcc10000..0x00000003fcc3ffff (192 KiB) map non-reusable ibm,RINGOVD@3fcc10000 [ 0.000000] OF: reserved mem: 0x00000003fcc40000..0x00000003fcc4ffff (64 KiB) map non-reusable ibm,VERSION@3fcc40000 [ 0.000000] OF: reserved mem: 0x00000003fcc50000..0x00000003fcd4ffff (1024 KiB) map non-reusable ibm,HCODE@3fcc50000 [ 0.000000] OF: reserved mem: 0x00000003fcd50000..0x00000003fcffffff (2752 KiB) map non-reusable ibm,WOFDATA@3fcd50000 [ 0.000000] OF: reserved mem: 0x00000003fd000000..0x00000003fd0fffff (1024 KiB) map non-reusable ibm,OCC@3fd000000 [ 0.000000] OF: reserved mem: 0x00000003fd100000..0x00000003fd10ffff (64 KiB) map non-reusable ibm,secure-crypt-algo-code@3fd100000 [ 0.000000] OF: reserved mem: 0x00000003fd110000..0x00000003fd11ffff (64 KiB) map non-reusable ibm,sbe-ffdc@3fd110000 [ 0.000000] OF: reserved mem: 0x00000003fd120000..0x00000003fd12ffff (64 KiB) map non-reusable ibm,sbe-comm@3fd120000 [ 0.000000] OF: reserved mem: 0x00000003fd130000..0x00000003fd58ffff (4480 KiB) map non-reusable ibm,hbrt-code-image@3fd130000 [ 0.000000] OF: reserved mem: 0x00000003fd590000..0x00000003fd6fffff (1472 KiB) map non-reusable ibm,hbrt-data@3fd590000 [ 0.000000] OF: reserved mem: 0x00000003fd700000..0x00000003fd7fffff (1024 KiB) map non-reusable ibm,arch-reg-data@3fd700000 [ 0.000000] OF: reserved mem: 0x00000003fd800000..0x00000003fdbfffff (4096 KiB) map non-reusable ibm,homer-image@3fd800000 [ 0.000000] OF: reserved mem: 0x00000003ff800000..0x00000003ffffffff (8192 KiB) map non-reusable ibm,occ-common-area@3ff800000 [ 0.000000] dt-cpu-ftrs: setup for ISA 3000 [ 0.000000] dt-cpu-ftrs: final cpu/mmu features = 0x0001b8eb8f5fb187 0x3c007041 [ 0.000000] radix-mmu: Page sizes from device-tree: [ 0.000000] radix-mmu: Page size shift = 12 AP=0x0 [ 0.000000] radix-mmu: Page size shift = 16 AP=0x5 [ 0.000000] radix-mmu: Page size shift = 21 AP=0x1 [ 0.000000] radix-mmu: Page size shift = 30 AP=0x2 [ 0.000000] Activating Kernel Userspace Access Prevention [ 0.000000] Activating Kernel Userspace Execution Prevention [ 0.000000] radix-mmu: Mapped 0x0000000000000000-0x0000000002750000 with 64.0 KiB pages (exec) [ 0.000000] radix-mmu: Mapped 0x0000000002750000-0x0000000400000000 with 64.0 KiB pages [ 0.000000] radix-mmu: Initializing Radix MMU [ 0.000000] Linux version 6.3.0-0.rc7.56.fc39.ppc64le (XXX@XXX) (gcc (GCC) 13.0.1 20230404 (Red Hat 13.0.1-0), GNU ld version 2.40-6.fc39) #1 SMP Mon Apr 17 12:29:28 UTC 2023 [ 0.000000] Found initrd at 0xc0000000050b0000:0xc0000000074d083c [ 0.000000] OPAL: Found memory mapped LPC bus on chip 0 [ 0.000000] ISA: Non-PCI bridge is /lpcm-opb@6030000000000/lpc@0 [ 0.000000] Hardware name: C1P9S01 REV 1.01 POWER9 0x4e1203 opal:skiboot-852ac62 PowerNV [ 0.000000] CPU maps initialized for 4 threads per core [ 0.000000] (thread shift is 2) [ 0.000000] Allocated 3456 bytes for 16 pacas [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0x400000000 [ 0.000000] dcache_bsize = 0x80 [ 0.000000] icache_bsize = 0x80 [ 0.000000] cpu_features = 0x0001b8eb8f5fb187 [ 0.000000] possible = 0x000ffbfbcf5fb187 [ 0.000000] always = 0x0000000380008181 [ 0.000000] cpu_user_features = 0xdc0065c2 0xaef00000 [ 0.000000] mmu_features = 0x3c007641 [ 0.000000] firmware_features = 0x0000000110000000 [ 0.000000] vmalloc start = 0xc008000000000000 [ 0.000000] IO start = 0xc00a000000000000 [ 0.000000] vmemmap start = 0xc00c000000000000 [ 0.000000] ----------------------------------------------------- [ 0.000000] numa: NODE_DATA [mem 0x3de4acb00-0x3de4b487f] kvm_cma_reserve: reserving 819 MiB for global area [ 0.000000] cma: Reserved 820 MiB at 0x0000000100000000 [ 0.000000] rfi-flush: mttrig type flush available [ 0.000000] rfi-flush: patched 12 locations (mttrig type flush) [ 0.000000] count-cache-flush: hardware flush enabled. [ 0.000000] link-stack-flush: software flush enabled. [ 0.000000] entry-flush: patched 61 locations (mttrig type flush) [ 0.000000] uaccess-flush: patched 1 locations (mttrig type flush) [ 0.000000] stf-barrier: eieio barrier available [ 0.000000] stf-barrier: patched 61 entry locations (eieio barrier) [ 0.000000] stf-barrier: patched 12 exit locations (eieio barrier) [ 0.000000] OPAL nvram setup, 589824 bytes [ 0.000000] barrier-nospec: using ORI speculation barrier [ 0.000000] barrier-nospec: patched 247 locations [ 0.000000] Top of RAM: 0x400000000, Total RAM: 0x400000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x00000003ffffffff] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x00000003ffffffff] Initmem setup node 0 [mem 0x0000000000000000-0x00000003ffffffff] percpu: Embedded 10 pages/cpu s606504 r0 d48856 u655360 [ 0.000000] pcpu-alloc: s606504 r0 d48856 u655360 alloc=10*65536 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 261888 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/mapper/XXXXXXXXXXXXXX ro rd.lvm.lv=... rhgb quiet [ 0.000000] Unknown kernel command line parameters "rhgb", will be passed to user space. [ 0.000000] random: crng init done [ 0.000000] Dentry cache hash table entries: 2097152 (order: 8, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 7, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 14869888K/16777216K available (19968K kernel code, 3264K rwdata, 12800K rodata, 7488K init, 2205K bss, 1067648K reserved, 839680K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] ftrace: allocating 45716 entries in 17 pages [ 0.000000] ftrace: allocated 17 pages with 2 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=16. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] xive: Interrupt handling initialized with native backend [ 0.000000] xive: Using priority 7 for all interrupts [ 0.000000] xive: Using 64kB queues [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] time_init: decrementer frequency = 512.000000 MHz [ 0.000000] time_init: processor frequency = 2700.000000 MHz [ 0.000002] time_init: 56 bit decrementer (max: 7fffffffffffff) [ 0.000005] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns [ 0.000010] clocksource: timebase mult[1f40000] shift[24] registered [ 0.000016] clockevent: decrementer mult[83126f] shift[24] cpu[0] kfence: initialized - using 33554432 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.000908] Console: colour dummy device 80x25 [ 0.000912] printk: console [tty0] enabled [ 0.001039] pid_max: default: 32768 minimum: 301 [ 0.001197] LSM: initializing lsm=lockdown,capability,yama,integrity,selinux,bpf,landlock [ 0.001297] Yama: becoming mindful. [ 0.001318] SELinux: Initializing. [ 0.001627] LSM support for eBPF active [ 0.001632] landlock: Up and running. [ 0.001690] Mount-cache hash table entries: 32768 (order: 2, 262144 bytes, linear) [ 0.001705] Mountpoint-cache hash table entries: 32768 (order: 2, 262144 bytes, linear) [ 0.002872] cblist_init_generic: Setting adjustable number of callback queues. [ 0.002879] cblist_init_generic: Setting shift to 4 and lim to 1. [ 0.002910] cblist_init_generic: Setting shift to 4 and lim to 1. [ 0.002942] POWER9 performance monitor hardware support registered [ 0.002983] rcu: Hierarchical SRCU implementation. [ 0.002985] rcu: Max phase no-delay instances is 1000. [ 0.003812] smp: Bringing up secondary CPUs ... [ 0.008342] smp: Brought up 1 node, 16 CPUs [ 0.008348] numa: Node 0 CPUs: 0-15 [ 0.010857] devtmpfs: initialized [ 0.021762] Initializing IODA2 PHB (XXX@XXX) [ 0.021800] PCI host bridge /pciex@600c3c0000000 (primary) ranges: [ 0.021812] MEM 0x000600c000000000..0x000600c07ffeffff -> 0x0000000080000000 [ 0.021845] MEM 0x0006000000000000..0x0006003fffffffff -> 0x0006000000000000 (M64 #1..31) [ 0.021851] Using M64 #31 as default window [ 0.021874] 512 (511) PE's M32: 0x80000000 [segment=0x400000] M64: 0x4000000000 [segment=0x20000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfe000) [ 0.022430] Initializing IODA2 PHB (XXX@XXX) [ 0.022461] PCI host bridge /pciex@600c3c0100000 ranges: [ 0.022472] MEM 0x000600c080000000..0x000600c0fffeffff -> 0x0000000080000000 [ 0.022502] MEM 0x0006004000000000..0x0006007fffffffff -> 0x0006004000000000 (M64 #1..15) [ 0.022507] Using M64 #15 as default window [ 0.022520] 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x4000000000 [segment=0x40000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd800) [ 0.022887] Initializing IODA2 PHB (XXX@XXX) [ 0.022920] PCI host bridge /pciex@600c3c0200000 ranges: [ 0.022930] MEM 0x000600c100000000..0x000600c17ffeffff -> 0x0000000080000000 [ 0.022960] MEM 0x0006008000000000..0x000600bfffffffff -> 0x0006008000000000 (M64 #1..15) [ 0.022965] Using M64 #15 as default window [ 0.022978] 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x4000000000 [segment=0x40000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd000) [ 0.023345] Initializing IODA2 PHB (XXX@XXX) [ 0.023377] PCI host bridge /pciex@600c3c0300000 ranges: [ 0.023387] MEM 0x000600c180000000..0x000600c1fffeffff -> 0x0000000080000000 [ 0.023417] MEM 0x0006020000000000..0x0006023fffffffff -> 0x0006020000000000 (M64 #1..31) [ 0.023422] Using M64 #31 as default window [ 0.023442] 512 (511) PE's M32: 0x80000000 [segment=0x400000] M64: 0x4000000000 [segment=0x20000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfc000) [ 0.023989] Initializing IODA2 PHB (XXX@XXX) [ 0.024021] PCI host bridge /pciex@600c3c0400000 ranges: [ 0.024032] MEM 0x000600c200000000..0x000600c27ffeffff -> 0x0000000080000000 [ 0.024062] MEM 0x0006024000000000..0x0006027fffffffff -> 0x0006024000000000 (M64 #1..15) [ 0.024067] Using M64 #15 as default window [ 0.024080] 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x4000000000 [segment=0x40000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb800) [ 0.024450] Initializing IODA2 PHB (XXX@XXX) [ 0.024481] PCI host bridge /pciex@600c3c0500000 ranges: [ 0.024491] MEM 0x000600c280000000..0x000600c2fffeffff -> 0x0000000080000000 [ 0.024521] MEM 0x0006028000000000..0x000602bfffffffff -> 0x0006028000000000 (M64 #1..15) [ 0.024526] Using M64 #15 as default window [ 0.024539] 256 (255) PE's M32: 0x80000000 [segment=0x800000] M64: 0x4000000000 [segment=0x40000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb000) [ 0.025093] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025102] futex hash table entries: 4096 (order: 3, 524288 bytes, linear) [ 0.026367] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.026975] thermal_sys: Registered thermal governor 'fair_share' [ 0.026980] thermal_sys: Registered thermal governor 'step_wise' [ 0.027003] cpuidle: using governor menu [ 0.027159] pstore: Registered nvram as persistent store backend [ 0.027774] EEH: PowerNV platform initialized [ 0.033986] PCI: Probing PCI hardware [ 0.034165] PCI host bridge to bus 0000:00 [ 0.034172] pci_bus 0000:00: root bus resource [mem 0x600c000000000-0x600c07ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.034179] pci_bus 0000:00: root bus resource [mem 0x6000000000000-0x6003fbfffffff 64bit pref] pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.034237] pci 0000:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.034427] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.037370] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.037584] PCI host bridge to bus 0001:00 [ 0.037589] pci_bus 0001:00: root bus resource [mem 0x600c080000000-0x600c0fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.037595] pci_bus 0001:00: root bus resource [mem 0x6004000000000-0x6007f7fffffff 64bit pref] pci_bus 0001:00: root bus resource [bus 00-ff] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff [ 0.037641] pci 0001:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.037824] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold [ 0.040745] pci 0001:00:00.0: PCI bridge to [bus 01-ff] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff [ 0.040973] PCI host bridge to bus 0002:00 [ 0.040978] pci_bus 0002:00: root bus resource [mem 0x600c100000000-0x600c17ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.040983] pci_bus 0002:00: root bus resource [mem 0x6008000000000-0x600bf7fffffff 64bit pref] pci_bus 0002:00: root bus resource [bus 00-ff] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff [ 0.041029] pci 0002:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.041220] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold [ 0.044091] pci 0002:01:00.0: [1b4b:9235] type 00 class 0x010601 [ 0.044128] pci 0002:01:00.0: reg 0x10: [io 0x8000-0x8007] pci 0002:01:00.0: reg 0x14: [io 0x8040-0x8043] pci 0002:01:00.0: reg 0x18: [io 0x8100-0x8107] pci 0002:01:00.0: reg 0x1c: [io 0x8140-0x8143] pci 0002:01:00.0: reg 0x20: [io 0x800000-0x80001f] pci 0002:01:00.0: reg 0x24: [mem 0x600c100000000-0x600c1000007ff] pci 0002:01:00.0: reg 0x30: [mem 0x600c150000000-0x600c15000ffff pref] pci 0002:01:00.0: BAR5 [mem size 0x00000800]: requesting alignment to 0x10000 [ 0.044387] pci 0002:01:00.0: PME# supported from D3hot [ 0.044577] pci 0002:00:00.0: PCI bridge to [bus 01] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.044803] PCI host bridge to bus 0003:00 [ 0.044807] pci_bus 0003:00: root bus resource [mem 0x600c180000000-0x600c1fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.044813] pci_bus 0003:00: root bus resource [mem 0x6020000000000-0x6023fbfffffff 64bit pref] pci_bus 0003:00: root bus resource [bus 00-ff] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to ff [ 0.044859] pci 0003:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.045048] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold [ 0.047930] pci 0003:01:00.0: [104c:8241] type 00 class 0x0c0330 [ 0.047976] pci 0003:01:00.0: reg 0x10: [mem 0x600c180000000-0x600c18000ffff 64bit] pci 0003:01:00.0: reg 0x18: [mem 0x600c180010000-0x600c180011fff 64bit] pci 0003:01:00.0: BAR2 [mem size 0x00002000 64bit]: requesting alignment to 0x10000 [ 0.048207] pci 0003:01:00.0: supports D1 D2 [ 0.048211] pci 0003:01:00.0: PME# supported from D0 D1 D2 D3hot [ 0.048438] pci 0003:00:00.0: PCI bridge to [bus 01] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.048698] PCI host bridge to bus 0004:00 [ 0.048703] pci_bus 0004:00: root bus resource [mem 0x600c200000000-0x600c27ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.048709] pci_bus 0004:00: root bus resource [mem 0x6024000000000-0x6027f7fffffff 64bit pref] pci_bus 0004:00: root bus resource [bus 00-ff] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to ff [ 0.048754] pci 0004:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.048944] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 0.051828] pci 0004:01:00.0: [14e4:1657] type 00 class 0x020000 [ 0.051875] pci 0004:01:00.0: reg 0x10: [mem 0x6024000000000-0x602400000ffff 64bit pref] pci 0004:01:00.0: reg 0x18: [mem 0x6024000010000-0x602400001ffff 64bit pref] pci 0004:01:00.0: reg 0x20: [mem 0x6024000020000-0x602400002ffff 64bit pref] pci 0004:01:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref] pci 0004:01:00.0: BAR6 [mem size 0x00000800 pref]: requesting alignment to 0x10000 [ 0.052182] pci 0004:01:00.0: PME# supported from D0 D3hot D3cold [ 0.052540] pci 0004:01:00.1: [14e4:1657] type 00 class 0x020000 [ 0.052587] pci 0004:01:00.1: reg 0x10: [mem 0x6024000030000-0x602400003ffff 64bit pref] pci 0004:01:00.1: reg 0x18: [mem 0x6024000040000-0x602400004ffff 64bit pref] pci 0004:01:00.1: reg 0x20: [mem 0x6024000050000-0x602400005ffff 64bit pref] pci 0004:01:00.1: reg 0x30: [mem 0x00000000-0x000007ff pref] pci 0004:01:00.1: BAR6 [mem size 0x00000800 pref]: requesting alignment to 0x10000 [ 0.052895] pci 0004:01:00.1: PME# supported from D0 D3hot D3cold [ 0.053223] pci 0004:01:00.2: [14e4:1657] type 00 class 0x020000 [ 0.053270] pci 0004:01:00.2: reg 0x10: [mem 0x6024000060000-0x602400006ffff 64bit pref] pci 0004:01:00.2: reg 0x18: [mem 0x6024000070000-0x602400007ffff 64bit pref] pci 0004:01:00.2: reg 0x20: [mem 0x6024000080000-0x602400008ffff 64bit pref] pci 0004:01:00.2: reg 0x30: [mem 0x00000000-0x000007ff pref] pci 0004:01:00.2: BAR6 [mem size 0x00000800 pref]: requesting alignment to 0x10000 [ 0.053582] pci 0004:01:00.2: PME# supported from D0 D3hot D3cold [ 0.053905] pci 0004:00:00.0: PCI bridge to [bus 01] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.054143] PCI host bridge to bus 0005:00 [ 0.054148] pci_bus 0005:00: root bus resource [mem 0x600c280000000-0x600c2fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.054154] pci_bus 0005:00: root bus resource [mem 0x6028000000000-0x602bf7fffffff 64bit pref] pci_bus 0005:00: root bus resource [bus 00-ff] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to ff [ 0.054199] pci 0005:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.054390] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 0.057261] pci 0005:01:00.0: [1a03:1150] type 01 class 0x060400 [ 0.057514] pci 0005:01:00.0: supports D1 D2 [ 0.057519] pci 0005:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.057731] pci 0005:00:00.0: PCI bridge to [bus 01-02] pci_bus 0005:02: extended config space not accessible [ 0.057902] pci 0005:02:00.0: [1a03:2000] type 00 class 0x030000 [ 0.057940] pci 0005:02:00.0: reg 0x10: [mem 0x600c280000000-0x600c280ffffff] pci 0005:02:00.0: reg 0x14: [mem 0x600c281000000-0x600c28101ffff] pci 0005:02:00.0: reg 0x18: [io 0x0000-0x007f] pci 0005:02:00.0: supports D1 D2 [ 0.058143] pci 0005:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.060801] pci 0005:01:00.0: PCI bridge to [bus 02] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to 02 [ 0.060876] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci_bus 0000:00: resource 4 [mem 0x600c000000000-0x600c07ffeffff] pci_bus 0000:00: resource 5 [mem 0x6000000000000-0x6003fbfffffff 64bit pref] pci 0001:00:00.0: PCI bridge to [bus 01-ff] pci_bus 0001:00: resource 4 [mem 0x600c080000000-0x600c0fffeffff] pci_bus 0001:00: resource 5 [mem 0x6004000000000-0x6007f7fffffff 64bit pref] pci 0002:00:00.0: BAR 14: assigned [mem 0x600c100000000-0x600c1007fffff] pci 0002:00:00.0: BAR 13: no space for [io size 0x1000] pci 0002:00:00.0: BAR 13: failed to assign [io size 0x1000] pci 0002:01:00.0: BAR 5: assigned [mem 0x600c100000000-0x600c1000007ff] pci 0002:01:00.0: BAR 6: assigned [mem 0x600c100010000-0x600c10001ffff pref] pci 0002:01:00.0: BAR 4: no space for [io size 0x0020] pci 0002:01:00.0: BAR 4: failed to assign [io size 0x0020] pci 0002:01:00.0: BAR 0: no space for [io size 0x0008] pci 0002:01:00.0: BAR 0: failed to assign [io size 0x0008] pci 0002:01:00.0: BAR 2: no space for [io size 0x0008] pci 0002:01:00.0: BAR 2: failed to assign [io size 0x0008] pci 0002:01:00.0: BAR 1: no space for [io size 0x0004] pci 0002:01:00.0: BAR 1: failed to assign [io size 0x0004] pci 0002:01:00.0: BAR 3: no space for [io size 0x0004] pci 0002:01:00.0: BAR 3: failed to assign [io size 0x0004] pci 0002:00:00.0: PCI bridge to [bus 01] pci 0002:00:00.0: bridge window [mem 0x600c100000000-0x600c17fefffff] pci_bus 0002:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.061063] pci_bus 0002:00: resource 4 [mem 0x600c100000000-0x600c17ffeffff] pci_bus 0002:00: resource 5 [mem 0x6008000000000-0x600bf7fffffff 64bit pref] pci_bus 0002:01: resource 1 [mem 0x600c100000000-0x600c17fefffff] pci 0003:00:00.0: BAR 14: assigned [mem 0x600c180000000-0x600c1803fffff] pci 0003:01:00.0: BAR 0: assigned [mem 0x600c180000000-0x600c18000ffff 64bit] pci 0003:01:00.0: BAR 2: assigned [mem 0x600c180010000-0x600c180011fff 64bit] pci 0003:00:00.0: PCI bridge to [bus 01] pci 0003:00:00.0: bridge window [mem 0x600c180000000-0x600c1ffefffff] pci_bus 0003:00: resource 4 [mem 0x600c180000000-0x600c1fffeffff] pci_bus 0003:00: resource 5 [mem 0x6020000000000-0x6023fbfffffff 64bit pref] pci_bus 0003:01: resource 1 [mem 0x600c180000000-0x600c1ffefffff] pci 0004:00:00.0: BAR 15: assigned [mem 0x6024000000000-0x602403fffffff 64bit pref] pci 0004:00:00.0: BAR 14: assigned [mem 0x600c200000000-0x600c2007fffff] pci 0004:01:00.0: BAR 0: assigned [mem 0x6024000000000-0x602400000ffff 64bit pref] pci 0004:01:00.0: BAR 2: assigned [mem 0x6024000010000-0x602400001ffff 64bit pref] pci 0004:01:00.0: BAR 4: assigned [mem 0x6024000020000-0x602400002ffff 64bit pref] pci 0004:01:00.0: BAR 6: assigned [mem 0x600c200000000-0x600c2000007ff pref] pci 0004:01:00.1: BAR 0: assigned [mem 0x6024000030000-0x602400003ffff 64bit pref] pci 0004:01:00.1: BAR 2: assigned [mem 0x6024000040000-0x602400004ffff 64bit pref] pci 0004:01:00.1: BAR 4: assigned [mem 0x6024000050000-0x602400005ffff 64bit pref] pci 0004:01:00.1: BAR 6: assigned [mem 0x600c200010000-0x600c2000107ff pref] pci 0004:01:00.2: BAR 0: assigned [mem 0x6024000060000-0x602400006ffff 64bit pref] pci 0004:01:00.2: BAR 2: assigned [mem 0x6024000070000-0x602400007ffff 64bit pref] pci 0004:01:00.2: BAR 4: assigned [mem 0x6024000080000-0x602400008ffff 64bit pref] pci 0004:01:00.2: BAR 6: assigned [mem 0x600c200020000-0x600c2000207ff pref] pci 0004:00:00.0: PCI bridge to [bus 01] pci 0004:00:00.0: bridge window [mem 0x600c200000000-0x600c27fefffff] pci 0004:00:00.0: bridge window [mem 0x6024000000000-0x6027f7ff0ffff 64bit pref] pci_bus 0004:00: resource 4 [mem 0x600c200000000-0x600c27ffeffff] pci_bus 0004:00: resource 5 [mem 0x6024000000000-0x6027f7fffffff 64bit pref] pci_bus 0004:01: resource 1 [mem 0x600c200000000-0x600c27fefffff] pci_bus 0004:01: resource 2 [mem 0x6024000000000-0x6027f7ff0ffff 64bit pref] pci 0005:00:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2817fffff] pci 0005:00:00.0: BAR 13: no space for [io size 0x1000] pci 0005:00:00.0: BAR 13: failed to assign [io size 0x1000] pci 0005:01:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2817fffff] pci 0005:01:00.0: BAR 13: no space for [io size 0x1000] pci 0005:01:00.0: BAR 13: failed to assign [io size 0x1000] pci 0005:02:00.0: BAR 0: assigned [mem 0x600c280000000-0x600c280ffffff] pci 0005:02:00.0: BAR 1: assigned [mem 0x600c281000000-0x600c28101ffff] pci 0005:02:00.0: BAR 2: no space for [io size 0x0080] pci 0005:02:00.0: BAR 2: failed to assign [io size 0x0080] pci 0005:01:00.0: PCI bridge to [bus 02] pci 0005:01:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff] pci 0005:00:00.0: PCI bridge to [bus 01-02] pci 0005:00:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff] pci_bus 0005:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.061591] pci_bus 0005:00: resource 4 [mem 0x600c280000000-0x600c2fffeffff] pci_bus 0005:00: resource 5 [mem 0x6028000000000-0x602bf7fffffff 64bit pref] pci_bus 0005:01: resource 1 [mem 0x600c280000000-0x600c2ffefffff] pci_bus 0005:02: resource 1 [mem 0x600c280000000-0x600c2ffefffff] pci_bus 0000:00: Configuring PE for bus [ 0.061616] pci 0000:00 : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe [ 0.061855] pci 0000:00:00.0: Configured PE#1fe [ 0.061907] pci_bus 0001:00: Configuring PE for bus [ 0.061911] pci 0001:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe [ 0.062146] pci 0001:00:00.0: Configured PE#fe [ 0.062190] pci_bus 0002:00: Configuring PE for bus [ 0.062194] pci 0002:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe [ 0.062429] pci 0002:00:00.0: Configured PE#fe [ 0.062474] pci_bus 0002:01: Configuring PE for bus [ 0.062481] pci 0002:01 : [PE# fd] Secondary bus 0x0000000000000001 associated with PE#fd [ 0.062718] pci 0002:01:00.0: Configured PE#fd [ 0.062723] pci 0002:01 : [PE# fd] Setting up 32-bit TCE table at 0..80000000 [ 0.063685] IOMMU table initialized, virtual merging enabled [ 0.063689] pci 0002:01 : [PE# fd] Setting up window#0 0..3ffffffff pg=10000 [ 0.063700] pci 0002:01 : [PE# fd] Enabling 64-bit DMA bypass [ 0.063721] pci 0002:01:00.0: Adding to iommu group 0 [ 0.063817] pci_bus 0003:00: Configuring PE for bus [ 0.063821] pci 0003:00 : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe [ 0.064057] pci 0003:00:00.0: Configured PE#1fe [ 0.064102] pci_bus 0003:01: Configuring PE for bus [ 0.064109] pci 0003:01 : [PE# 1fd] Secondary bus 0x0000000000000001 associated with PE#1fd [ 0.064347] pci 0003:01:00.0: Configured PE#1fd [ 0.064351] pci 0003:01 : [PE# 1fd] Setting up 32-bit TCE table at 0..80000000 [ 0.065311] pci 0003:01 : [PE# 1fd] Setting up window#0 0..3ffffffff pg=10000 [ 0.065320] pci 0003:01 : [PE# 1fd] Enabling 64-bit DMA bypass [ 0.065339] pci 0003:01:00.0: Adding to iommu group 1 [ 0.065441] pci_bus 0004:00: Configuring PE for bus [ 0.065444] pci 0004:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe [ 0.065679] pci 0004:00:00.0: Configured PE#fe [ 0.065724] pci_bus 0004:01: Configuring PE for bus [ 0.065747] pci 0004:01 : [PE# 00] Secondary bus 0x0000000000000001 associated with PE#0 [ 0.065985] pci 0004:01:00.0: Configured PE#0 [ 0.065989] pci 0004:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 [ 0.066948] pci 0004:01 : [PE# 00] Setting up window#0 0..3ffffffff pg=10000 [ 0.066956] pci 0004:01 : [PE# 00] Enabling 64-bit DMA bypass [ 0.066975] pci 0004:01:00.0: Adding to iommu group 2 [ 0.067090] pci 0004:01:00.1: Added to existing PE#0 [ 0.067098] pci 0004:01:00.1: Adding to iommu group 2 [ 0.067210] pci 0004:01:00.2: Added to existing PE#0 [ 0.067218] pci 0004:01:00.2: Adding to iommu group 2 [ 0.067315] pci_bus 0005:00: Configuring PE for bus [ 0.067319] pci 0005:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe [ 0.067554] pci 0005:00:00.0: Configured PE#fe [ 0.067599] pci_bus 0005:01: Configuring PE for bus [ 0.067605] pci 0005:01 : [PE# fd] Secondary bus 0x0000000000000001 associated with PE#fd [ 0.067841] pci 0005:01:00.0: Configured PE#fd [ 0.067942] pci_bus 0005:02: Configuring PE for bus [ 0.067949] pci 0005:02 : [PE# fc] Secondary bus 0x0000000000000002..0x0000000000000002 associated with PE#fc [ 0.068187] pci 0005:02:00.0: Configured PE#fc [ 0.068191] pci 0005:02 : [PE# fc] Setting up 32-bit TCE table at 0..80000000 [ 0.069147] pci 0005:02 : [PE# fc] Setting up window#0 0..3ffffffff pg=10000 [ 0.069156] pci 0005:02 : [PE# fc] Enabling 64-bit DMA bypass [ 0.069174] pci 0005:02:00.0: Adding to iommu group 3 [ 0.069310] pci 0002:00:00.0: enabling device (0101 -> 0103) [ 0.069329] pci 0003:00:00.0: enabling device (0101 -> 0103) [ 0.069346] pci 0004:00:00.0: enabling device (0101 -> 0103) [ 0.069363] pci 0005:00:00.0: enabling device (0101 -> 0103) [ 0.069382] pci 0005:01:00.0: enabling device (0141 -> 0143) [ 0.069399] EEH: Capable adapter found: recovery enabled. [ 0.069490] PCI: Probing PCI hardware done [ 0.076269] cpuidle-powernv: Default stop: psscr = 0x0000000000000330,mask=0x00000000003003ff [ 0.076274] cpuidle-powernv: Deepest stop: psscr = 0x0000000000300375,mask=0x00000000003003ff [ 0.076277] cpuidle-powernv: First stop level that may lose SPRs = 0x4 [ 0.076279] cpuidle-powernv: First stop level that may lose timebase = 0x10 [ 0.076749] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.076989] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.076994] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.076998] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.077002] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.122812] raid6: skipped pq benchmark and selected vpermxor8 [ 0.122816] raid6: using intx1 recovery algorithm [ 0.122956] iommu: Default domain type: Translated [ 0.122959] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.123105] SCSI subsystem initialized [ 0.123157] libata version 3.00 loaded. [ 0.123224] usbcore: registered new interface driver usbfs [ 0.123238] usbcore: registered new interface driver hub [ 0.123256] usbcore: registered new device driver usb [ 0.123296] pps_core: LinuxPPS API ver. 1 registered [ 0.123299] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.123305] PTP clock support registered [ 0.123371] EDAC MC: Ver: 3.0.0 [ 0.123862] NetLabel: Initializing [ 0.123865] NetLabel: domain hash size = 128 [ 0.123867] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.123896] NetLabel: unlabeled traffic allowed by default [ 0.123905] mctp: management component transport protocol core [ 0.123907] NET: Registered PF_MCTP protocol family [ 0.124019] pci 0005:02:00.0: vgaarb: setting as boot VGA device [ 0.124024] pci 0005:02:00.0: vgaarb: bridge control possible [ 0.124027] pci 0005:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.124031] vgaarb: loaded [ 0.124252] clocksource: Switched to clocksource timebase [ 0.124765] VFS: Disk quotas dquot_6.6.0 [ 0.124801] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 0.128122] NET: Registered PF_INET protocol family [ 0.128244] IP idents hash table entries: 262144 (order: 5, 2097152 bytes, linear) [ 0.135151] tcp_listen_portaddr_hash hash table entries: 8192 (order: 1, 131072 bytes, linear) [ 0.135196] Table-perturb hash table entries: 65536 (order: 2, 262144 bytes, linear) [ 0.135244] TCP established hash table entries: 131072 (order: 4, 1048576 bytes, linear) [ 0.135657] TCP bind hash table entries: 65536 (order: 5, 2097152 bytes, linear) [ 0.136016] TCP: Hash tables configured (established 131072 bind 65536) [ 0.136158] MPTCP token hash table entries: 16384 (order: 2, 393216 bytes, linear) [ 0.136258] UDP hash table entries: 8192 (order: 2, 262144 bytes, linear) [ 0.136341] UDP-Lite hash table entries: 8192 (order: 2, 262144 bytes, linear) [ 0.136545] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.136559] NET: Registered PF_XDP protocol family [ 0.136594] pci 0003:01:00.0: enabling device (0140 -> 0142) [ 0.136654] PCI: CLS 0 bytes, default 128 [ 0.136787] Trying to unpack rootfs image as initramfs... [ 0.136958] rtas_flash: no firmware flash support [ 0.159787] Initialise system trusted keyrings [ 0.159815] Key type blacklist registered [ 0.159875] workingset: timestamp_bits=38 max_order=18 bucket_order=0 [ 0.159918] zbud: loaded [ 0.161192] integrity: Platform Keyring initialized [ 0.191523] NET: Registered PF_ALG protocol family [ 0.191531] xor: measuring software checksum speed [ 0.192976] 8regs : 6823 MB/sec [ 0.194687] 8regs_prefetch : 5827 MB/sec [ 0.196143] 32regs : 6809 MB/sec [ 0.197899] 32regs_prefetch : 5619 MB/sec [ 0.199126] altivec : 8049 MB/sec [ 0.199130] xor: using function: altivec (8049 MB/sec) [ 0.199150] Key type asymmetric registered [ 0.199158] Asymmetric key parser 'x509' registered [ 0.940331] Freeing initrd memory: 36992K [ 0.946710] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.946786] io scheduler mq-deadline registered [ 0.946789] io scheduler kyber registered [ 0.946824] io scheduler bfq registered [ 0.950049] atomic64_test: passed [ 0.950727] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.950931] hvc0: raw protocol on /ibm,opal/consoles/serial@0 [ 0.951013] hvc0: No interrupts property, using OPAL event [ 0.951404] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.954341] Non-volatile memory driver v1.3 [ 0.954730] ahci 0002:01:00.0: version 3.0 [ 0.954743] ahci 0002:01:00.0: enabling device (0541 -> 0543) [ 0.964931] ahci 0002:01:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 0.964939] ahci 0002:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 0.965551] scsi host0: ahci [ 0.965742] scsi host1: ahci [ 0.965896] scsi host2: ahci [ 0.966050] scsi host3: ahci [ 0.966123] ata1: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000100 irq 39 [ 0.966127] ata2: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000180 irq 39 [ 0.966132] ata3: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000200 irq 39 [ 0.966135] ata4: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000280 irq 39 [ 0.966793] xhci_hcd 0003:01:00.0: xHCI Host Controller [ 0.966851] xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 1 [ 0.966975] xhci_hcd 0003:01:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x0000000004000000 [ 0.967447] xhci_hcd 0003:01:00.0: xHCI Host Controller [ 0.967498] xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 2 [ 0.967504] xhci_hcd 0003:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.967607] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 0.967612] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.967617] usb usb1: Product: xHCI Host Controller [ 0.967620] usb usb1: Manufacturer: Linux 6.3.0-0.rc7.56.fc39.ppc64le xhci-hcd [ 0.967624] usb usb1: SerialNumber: ... [ 0.967805] hub 1-0:1.0: USB hub found [ 0.967822] hub 1-0:1.0: 4 ports detected [ 0.968072] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.968128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03 [ 0.968133] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.968138] usb usb2: Product: xHCI Host Controller [ 0.968141] usb usb2: Manufacturer: Linux 6.3.0-0.rc7.56.fc39.ppc64le xhci-hcd [ 0.968145] usb usb2: SerialNumber: ... [ 0.968305] hub 2-0:1.0: USB hub found [ 0.968321] hub 2-0:1.0: 4 ports detected [ 0.968601] usbcore: registered new interface driver usbserial_generic [ 0.968612] usbserial: USB Serial support registered for generic [ 0.968663] mousedev: PS/2 mouse device common for all mice [ 0.970184] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.970192] device-mapper: uevent: version 1.0.3 [ 0.970279] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.970394] powernv-cpufreq: cpufreq pstate min 0x62 nominal 0x42 max 0x0 [ 0.970398] powernv-cpufreq: Workload Optimized Frequency is enabled in the platform [ 0.972258] powernv_idle_driver registered [ 0.973002] hid: raw HID events driver (C) Jiri Kosina [ 0.973061] usbcore: registered new interface driver usbhid [ 0.973065] usbhid: USB HID core driver [ 0.973486] drop_monitor: Initializing network drop monitor service [ 0.993736] Initializing XFRM netlink socket [ 0.993773] NET: Registered PF_INET6 protocol family [ 0.999873] Segment Routing with IPv6 [ 0.999876] RPL Segment Routing with IPv6 [ 0.999888] In-situ OAM (IOAM) with IPv6 [ 0.999916] mip6: Mobile IPv6 [ 0.999921] NET: Registered PF_PACKET protocol family [ 1.000038] secvar-sysfs: Failed to retrieve secvar operations [ 1.000047] drmem: No dynamic reconfiguration memory found [ 1.000059] Running MSI bitmap self-tests ... [ 1.004131] registered taskstats version 1 [ 1.004895] Loading compiled-in X.509 certificates [ 1.018514] Loaded X.509 cert 'Fedora kernel signing key: b92e063c166a6d1700b27ae8fd57a2241fc9daf1' [ 1.018847] zswap: loaded using pool lzo/zbud [ 1.023611] page_owner is disabled [ 1.023728] Key type .fscrypt registered [ 1.023730] Key type fscrypt-provisioning registered [ 1.024530] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 1.024816] pstore: Using crash dump compression: deflate [ 1.024839] Key type big_key registered [ 1.029145] Key type encrypted registered [ 1.029215] Secure boot mode disabled [ 1.029220] ima: No TPM chip found, activating TPM-bypass! [ 1.029225] Loading compiled-in module X.509 certificates [ 1.030184] Loaded X.509 cert 'Fedora kernel signing key: b92e063c166a6d1700b27ae8fd57a2241fc9daf1' [ 1.030189] ima: Allocated hash algorithm: sha256 [ 1.030253] Secure boot mode disabled [ 1.030303] Trusted boot mode disabled [ 1.030305] ima: No architecture policies found [ 1.030325] evm: Initialising EVM extended attributes: [ 1.030327] evm: security.selinux [ 1.030329] evm: security.SMACK64 (disabled) [ 1.030331] evm: security.SMACK64EXEC (disabled) [ 1.030333] evm: security.SMACK64TRANSMUTE (disabled) [ 1.030335] evm: security.SMACK64MMAP (disabled) [ 1.030337] evm: security.apparmor (disabled) [ 1.030339] evm: security.ima [ 1.030341] evm: security.capability [ 1.030343] evm: HMAC attrs: 0x1 [ 1.030451] alg: No test for 842 (842-nx) [ 1.078635] ata3: SATA link down (SStatus 0 SControl 300) [ 1.078796] ata2: SATA link down (SStatus 0 SControl 300) [ 1.078819] ata1: SATA link down (SStatus 0 SControl 300) [ 1.080578] alg: No test for 842 (842-scomp) [ 1.080621] alg: No test for 842 (842-generic) [ 1.244277] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.245900] ata4.00: supports DRM functions and may not be fully accessible [ 1.245904] ata4.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM04B6Q, max UDMA/133 [ 1.246463] ata4.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.248488] ata4.00: Features: Trust Dev-Sleep NCQ-sndrcv [ 1.248838] ata4.00: supports DRM functions and may not be fully accessible [ 1.251809] ata4.00: configured for UDMA/133 [ 1.251917] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 4B6Q PQ: 0 ANSI: 5 [ 1.252286] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 1.252443] sd 3:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 1.252469] sd 3:0:0:0: [sda] Write Protect is off [ 1.252473] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.252512] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.252601] sd 3:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.274276] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 1.356502] sda: sda1 sda2 [ 1.357424] sd 3:0:0:0: [sda] supports TCG Opal [ 1.357428] sd 3:0:0:0: [sda] Attached SCSI removable disk [ 1.359909] Freeing unused kernel image (initmem) memory: 7488K [ 1.446113] Checked W+X mappings: passed, no W+X pages found [ 1.446118] rodata_test: all tests were successful [ 1.446124] Run /init as init process [ 1.446127] with arguments: [ 1.446129] /init [ 1.446131] rhgb [ 1.446134] with environment: [ 1.446136] HOME=/ [ 1.446138] TERM=linux [ 1.456770] usb 1-3: New USB device found, idVendor=1d6b, idProduct=0107, bcdDevice= 1.00 [ 1.456778] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.456783] usb 1-3: Product: USB Virtual Hub [ 1.456787] usb 1-3: Manufacturer: Aspeed [ 1.456791] usb 1-3: SerialNumber: ... [ 1.471830] hub 1-3:1.0: USB hub found [ 1.472162] hub 1-3:1.0: 5 ports detected [ 1.624270] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.807366] usb 1-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.807373] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.807378] usb 1-4: Product: USB2.0 Hub [ 1.824157] hub 1-4:1.0: USB hub found [ 1.824731] hub 1-4:1.0: 4 ports detected [ 1.850512] alua: device handler registered [ 1.851972] emc: device handler registered [ 1.853709] rdac: device handler registered [ 1.904294] usb 1-3.1: new high-speed USB device number 4 using xhci_hcd [ 2.047159] usb 1-3.1: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 1.00 [ 2.047173] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.047179] usb 1-3.1: Product: virtual_input [ 2.047184] usb 1-3.1: Manufacturer: OpenBMC [ 2.047189] usb 1-3.1: SerialNumber: ... [ 2.102260] input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:1D6B:0104.0001/input/input0 [ 2.164658] hid-generic 0003:1D6B:0104.0001: input,hidraw0: USB HID v1.01 Keyboard [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input0 [ 2.166702] input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:1D6B:0104.0002/input/input1 [ 2.166947] hid-generic 0003:1D6B:0104.0002: input,hidraw1: USB HID v1.01 Mouse [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input1 [ 2.174275] usb 1-4.1: new full-speed USB device number 5 using xhci_hcd [ 2.188472] ast 0005:02:00.0: enabling device (0141 -> 0143) [ 2.188542] ast 0005:02:00.0: [drm] platform has no IO space, trying MMIO [ 2.188548] ast 0005:02:00.0: [drm] Using device-tree for configuration [ 2.188552] ast 0005:02:00.0: [drm] AST 2500 detected [ 2.188560] ast 0005:02:00.0: [drm] Using Sil164 TMDS transmitter [ 2.188565] ast 0005:02:00.0: [drm] dram MCLK=800 Mhz type=7 bus_width=16 [ 2.189259] [drm] Initialized ast 0.1.0 20120228 for 0005:02:00.0 on minor 0 [ 2.192316] fbcon: Deferring console take-over [ 2.192321] ast 0005:02:00.0: [drm] fb0: astdrmfb frame buffer device [ 2.198137] tg3 0004:01:00.0: enabling device (0140 -> 0142) [ 2.241417] tg3 0004:01:00.0 eth0: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address EC7EC8C1A79F03F877FB76D1692038A9 [ 2.241425] tg3 0004:01:00.0 eth0: attached PHY is serdes (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.241429] tg3 0004:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] tg3 0004:01:00.0 eth0: dma_rwctrl[00000000] dma_mask[64-bit] tg3 0004:01:00.1: enabling device (0140 -> 0142) [ 2.281121] tg3 0004:01:00.1 eth1: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 06F3748FEBAE7EFBFAE9F5F4CE87441A [ 2.281128] tg3 0004:01:00.1 eth1: attached PHY is serdes (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.281133] tg3 0004:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] tg3 0004:01:00.1 eth1: dma_rwctrl[00000000] dma_mask[64-bit] tg3 0004:01:00.2: enabling device (0140 -> 0142) [ 2.311661] tg3 0004:01:00.2 eth2: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 502085AB49163E8D1CA61C59A9CA9971 [ 2.311672] tg3 0004:01:00.2 eth2: attached PHY is serdes (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.311679] tg3 0004:01:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] tg3 0004:01:00.2 eth2: dma_rwctrl[00000000] dma_mask[64-bit] tg3 0004:01:00.1 enP4p1s0f1: renamed from eth1 [ 2.332734] usb 1-4.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11 [ 2.332742] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.332746] usb 1-4.1: Product: USB Receiver [ 2.332750] usb 1-4.1: Manufacturer: Logitech [ 2.364347] input: Logitech USB Receiver as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:046D:C52B.0003/input/input2 [ 2.404816] tg3 0004:01:00.2 enP4p1s0f2: renamed from eth2 [ 2.434523] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0003:01:00.0-4.1/input0 [ 2.439093] input: Logitech USB Receiver Mouse as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C52B.0004/input/input3 [ 2.439272] input: Logitech USB Receiver Consumer Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C52B.0004/input/input4 [ 2.484408] tg3 0004:01:00.0 enP4p1s0f0: renamed from eth0 [ 2.504383] input: Logitech USB Receiver System Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C52B.0004/input/input5 [ 2.504593] hid-generic 0003:046D:C52B.0004: input,hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0003:01:00.0-4.1/input1 [ 2.508160] hid-generic 0003:046D:C52B.0005: hiddev97,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0003:01:00.0-4.1/input2 [ 2.614289] usb 1-4.4: new full-speed USB device number 6 using xhci_hcd [ 2.787214] usb 1-4.4: New USB device found, idVendor=0d8c, idProduct=0102, bcdDevice= 0.10 [ 2.787221] usb 1-4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 2.787226] usb 1-4.4: Product: USB Sound Device [ 2.803542] input: USB Sound Device as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.4/1-4.4:1.3/0003:0D8C:0102.0006/input/input7 [ 2.864477] hid-generic 0003:0D8C:0102.0006: input,hidraw5: USB HID v1.00 Device [USB Sound Device ] on usb-0003:01:00.0-4.4/input3 [ 3.599208] logitech-djreceiver 0003:046D:C52B.0005: hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0003:01:00.0-4.1/input2 [ 3.737451] input: Logitech Wireless Device PID:404d Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.2/0003:046D:C52B.0005/0003:046D:404D.0007/input/input8 [ 3.738081] input: Logitech Wireless Device PID:404d Mouse as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.2/0003:046D:C52B.0005/0003:046D:404D.0007/input/input9 [ 3.738360] hid-generic 0003:046D:404D.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0003:01:00.0-4.1/input2:1 [ 4.316961] input: Logitech Wireless Device PID:404d as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.2/0003:046D:C52B.0005/0003:046D:404D.0007/input/input13 [ 4.317238] logitech-hidpp-device 0003:046D:404D.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0003:01:00.0-4.1/input2:1 [ 5.410428] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled [ 5.415571] XFS (dm-0): Mounting V5 Filesystem HASH_1BA-7995-525C-06E3-29879A4D129C [ 5.432695] XFS (dm-0): Starting recovery (logdev: internal) [ 5.444032] XFS (dm-0): Ending recovery (logdev: internal) [ 6.142555] SELinux: policy capability network_peer_controls=1 [ 6.142561] SELinux: policy capability open_perms=1 [ 6.142564] SELinux: policy capability extended_socket_class=1 [ 6.142566] SELinux: policy capability always_check_network=0 [ 6.142568] SELinux: policy capability cgroup_seclabel=1 [ 6.142570] SELinux: policy capability nnp_nosuid_transition=1 [ 6.142573] SELinux: policy capability genfs_seclabel_symlinks=1 [ 6.142575] SELinux: policy capability ioctl_skip_cloexec=0 [ 6.849133] zram: Added device: zram0 [ 7.178860] loop: module loaded [ 7.195402] fuse: init (API version 7.38) [ 7.370293] zram0: detected capacity change from 0 to 16777216 [ 7.405988] Adding 8388544k swap on /dev/zram0. Priority:100 extents:1 across:8388544k SSDscFS [ 7.647668] IPMI message handler: version 39.2 [ 7.653441] ipmi device interface [ 7.655497] rtc-opal opal-rtc: registered as rtc0 [ 7.662250] at24 1-0050: supply vcc not found, using dummy regulator [ 7.662612] at24 1-0050: 65536 byte 24c512 EEPROM, writable, 1 bytes/write [ 7.662713] at24 2-0050: supply vcc not found, using dummy regulator [ 7.665481] 5 fixed-partitions partitions found on MTD device flash@0 [ 7.665488] Creating 5 MTD partitions on "flash@0": [ 7.665492] 0x000000000000-0x000004000000 : "PNOR" [ 7.665771] 0x0000022a1000-0x000003821000 : "BOOTKERNEL" [ 7.665982] 0x000003944000-0x000003946000 : "VERSION" [ 7.666192] 0x000003989000-0x0000039c9000 : "IMA_CATALOG" [ 7.666393] 0x000003e10000-0x000003ff0000 : "BOOTKERNFW" [ 7.666577] usbcore: registered new device driver onboard-usb-hub [ 7.666716] usb 1-4.1: USB disconnect, device number 5 [ 7.684451] rtc-opal opal-rtc: setting system clock to 2023-04-09T10:35:20 UTC (1681036520) [ 7.696058] ipmi-powernv ibm,opal:ipmi: IPMI message handler: The GUID response from the BMC was too short, it was 1 but should have been 17. Assuming GUID is not available. [ 7.700344] mc: Linux media interface: v0.10 [ 7.701340] at24 3-0050: supply vcc not found, using dummy regulator [ 7.705493] at24 3-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write [ 7.705627] at24 4-0050: supply vcc not found, using dummy regulator [ 7.715031] ipmi-powernv ibm,opal:ipmi: IPMI message handler: Found new BMC (man_id: 0x00cb06, prod_id: 0x0001, dev_id: 0x00) [ 7.737847] at24 4-0050: 256 byte spd EEPROM, read-only [ 7.737912] at24 5-0054: supply vcc not found, using dummy regulator [ 7.738184] at24 5-0054: 256 byte spd EEPROM, read-only [ 7.797776] EXT4-fs (sda1): mounted filesystem HASH_138-719A-9000-C313-06E441C63B46 with ordered data mode. Quota mode: none. [ 7.891022] usb 1-4.4: current rate 30464 is different from the runtime rate 96000 [ 7.929028] usb 1-4.4: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 7.929034] usb 1-4.4: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1 [ 7.936522] usb 1-4.4: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 7.936530] usb 1-4.4: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1 [ 7.961404] usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 7.961414] usb 1-4.4: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1 [ 7.968915] usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 7.968921] usb 1-4.4: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1 [ 7.977168] usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 7.977173] usb 1-4.4: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1 [ 7.977687] usbcore: registered new interface driver snd-usb-audio [ 8.252747] RPC: Registered named UNIX socket transport module. [ 8.252750] RPC: Registered udp transport module. [ 8.252752] RPC: Registered tcp transport module. [ 8.252753] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.694591] usb 1-4.4: USB disconnect, device number 6 [ 9.217875] hub 1-4:1.0: USB hub found [ 9.218435] hub 1-4:1.0: 4 ports detected [ 9.257932] hub 1-4:1.0: USB hub found [ 9.258448] hub 1-4:1.0: 4 ports detected [ 9.484394] usb 1-4.1: new full-speed USB device number 7 using xhci_hcd [ 9.622410] usb 1-4.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11 [ 9.622416] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9.622419] usb 1-4.1: Product: USB Receiver [ 9.622421] usb 1-4.1: Manufacturer: Logitech [ 9.662794] logitech-djreceiver 0003:046D:C52B.000A: hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0003:01:00.0-4.1/input2 [ 9.822257] input: Logitech Wireless Device PID:404d as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.2/0003:046D:C52B.000A/0003:046D:404D.000B/input/input14 [ 9.822699] logitech-hidpp-device 0003:046D:404D.000B: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0003:01:00.0-4.1/input2:1 [ 9.914406] usb 1-4.4: new full-speed USB device number 8 using xhci_hcd [ 10.087169] usb 1-4.4: New USB device found, idVendor=0d8c, idProduct=0102, bcdDevice= 0.10 [ 10.087179] usb 1-4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 10.087184] usb 1-4.4: Product: USB Sound Device [ 10.163554] usb 1-4.4: current rate 30464 is different from the runtime rate 96000 [ 10.201554] usb 1-4.4: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 10.201561] usb 1-4.4: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1 [ 10.209701] usb 1-4.4: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 10.209705] usb 1-4.4: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1 [ 10.235064] usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 10.235069] usb 1-4.4: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1 [ 10.242563] usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 10.242567] usb 1-4.4: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1 [ 10.250831] usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 10.250835] usb 1-4.4: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1 [ 10.254602] input: USB Sound Device as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.4/1-4.4:1.3/0003:0D8C:0102.000C/input/input15 [ 10.324792] hid-generic 0003:0D8C:0102.000C: input,hidraw4: USB HID v1.00 Device [USB Sound Device ] on usb-0003:01:00.0-4.4/input3 [ 27.272241] logitech-hidpp-device 0003:046D:404D.000B: HID++ 4.1 device connected. [ 139.690216] sda1: Can't mount, would change RO state [ 142.569939] EXT4-fs (sda1): unmounting filesystem HASH_138-719A-9000-C313-06E441C63B46. [ 142.665026] zram0: detected capacity change from 16777216 to 0