[ 0.000000] Linux version 6.12.12+bpo-amd64 (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.12.12-1~bpo12+1 (2025-02-23) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf04fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf05000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] DMI: Memory slots populated: 4/4 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.183 MHz processor [ 0.002364] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002368] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008679] AGP: No AGP bridge found [ 0.008738] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008744] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008747] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010512] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010520] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.015967] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 0.016526] RAMDISK: [mem 0x279d9000-0x2fce3fff] ACPI: Early table checksum verification disabled [ 0.016538] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.016542] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016548] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.016553] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240827/tbfadt-611) [ 0.016558] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.016562] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.016565] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.016569] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.016572] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.016576] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.016579] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.016583] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.016586] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.016589] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 0.016671] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd5680-0x63effffff] Zone ranges: [ 0.017048] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 0.017055] Movable zone start for each node [ 0.017058] Early memory node ranges [ 0.017059] node 0: [mem 0x0000000000001000-0x0000000000099fff] node 0: [mem 0x0000000000100000-0x00000000bdf04fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017120] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.026987] On node 0, zone DMA32: 3876 pages in unavailable ranges [ 0.027014] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.027030] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.027956] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028022] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.028250] ACPI: PM-Timer IO Port: 0x808 [ 0.028260] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.028269] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.028272] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.028275] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028277] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.028282] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028283] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.028293] CPU topo: Max. logical packages: 1 [ 0.028294] CPU topo: Max. logical dies: 1 [ 0.028294] CPU topo: Max. dies per package: 1 [ 0.028300] CPU topo: Max. threads per core: 1 [ 0.028301] CPU topo: Num. cores per package: 8 [ 0.028302] CPU topo: Num. threads per package: 8 [ 0.028302] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.028322] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf05000-0xbe4e2fff] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.028353] Booting paravirtualized kernel on bare hardware [ 0.028356] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.033944] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.035107] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 0.035115] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 0.035119] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.035141] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 root=UUID=HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro quiet splash [ 0.035211] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64", will be passed to user space. [ 0.041804] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.045167] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.045262] Fallback order for Node 0: 0 [ 0.045267] Built 1 zonelists, mobility grouping on. Total pages: 6279885 [ 0.045268] Policy zone: Normal [ 0.045280] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.045282] AGP: Checking aperture... [ 0.051585] AGP: No AGP bridge found [ 0.051587] AGP: Node 0: aperture [bus addr 0xb8000000-0xb9ffffff] (32MB) [ 0.051589] Aperture pointing to e820 RAM. Ignoring. [ 0.051590] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.051590] AGP: Please enable the IOMMU option in the BIOS setup [ 0.051591] AGP: This costs you 64MB of RAM [ 0.051594] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.051597] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 0.107924] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.108140] ftrace: allocating 45541 entries in 178 pages [ 0.122077] ftrace: allocated 178 pages with 4 groups [ 0.123316] Dynamic Preempt: voluntary [ 0.123563] rcu: Preemptible hierarchical RCU implementation. [ 0.123564] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.123565] Trampoline variant of Tasks RCU enabled. [ 0.123566] Rude variant of Tasks RCU enabled. [ 0.123566] Tracing variant of Tasks RCU enabled. [ 0.123567] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.123568] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.123579] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.123582] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.123584] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.128947] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.129184] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.129285] spurious 8259A interrupt: IRQ7. [ 0.132590] Console: colour VGA+ 80x25 [ 0.132593] printk: legacy console [tty0] enabled [ 0.132861] ACPI: Core revision 20240827 [ 0.133029] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.133043] APIC: Switch to symmetric I/O mode setup [ 0.133394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.153045] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c961fcc5a6, max_idle_ns: 440795305778 ns [ 0.153052] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.36 BogoMIPS (lpj=12372732) [ 0.153083] LVT offset 1 assigned for vector 0xf9 [ 0.153090] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.153091] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.153097] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.153100] Spectre V2 : Mitigation: Retpolines [ 0.153101] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.153102] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.153103] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.153104] RETBleed: Mitigation: untrained return thunk [ 0.153107] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.153109] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.153114] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.153116] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.153117] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.153119] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.153121] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.185246] Freeing SMP alternatives memory: 40K [ 0.185253] pid_max: default: 32768 minimum: 301 [ 0.186105] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 0.186465] landlock: Up and running. [ 0.186467] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.186601] AppArmor: AppArmor initialized [ 0.186640] TOMOYO Linux initialized [ 0.186957] LSM support for eBPF active [ 0.187374] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.187453] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.297375] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.297761] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.297789] ... version: 0 [ 0.297790] ... bit width: 48 [ 0.297792] ... generic registers: 6 [ 0.297793] ... value mask: 0000ffffffffffff [ 0.297794] ... max period: 00007fffffffffff [ 0.297796] ... fixed-purpose events: 0 [ 0.297797] ... event mask: 000000000000003f [ 0.297916] signal: max sigframe size: 1776 [ 0.297982] rcu: Hierarchical SRCU implementation. [ 0.297984] rcu: Max phase no-delay instances is 1000. [ 0.298058] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.303378] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.303533] smp: Bringing up secondary CPUs ... [ 0.303726] smpboot: x86: Booting SMP configuration: [ 0.303727] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.333108] smp: Brought up 1 node, 8 CPUs [ 0.333108] smpboot: Total of 8 processors activated (49490.92 BogoMIPS) [ 0.391905] node 0 deferred pages initialised in 56ms [ 0.393098] Memory: 24355132K/25119540K available (16384K kernel code, 2484K rwdata, 11636K rodata, 4220K init, 5000K bss, 756512K reserved, 0K cma-reserved) [ 0.394358] devtmpfs: initialized [ 0.394358] x86/mm: Memory block size: 128MB [ 0.399235] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.399235] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.399235] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.399235] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.399235] pinctrl core: initialized pinctrl subsystem [ 0.401379] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.402211] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.402908] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.403667] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.403718] thermal_sys: Registered thermal governor 'fair_share' [ 0.403718] thermal_sys: Registered thermal governor 'bang_bang' [ 0.403718] thermal_sys: Registered thermal governor 'step_wise' [ 0.403718] thermal_sys: Registered thermal governor 'user_space' [ 0.403718] thermal_sys: Registered thermal governor 'power_allocator' [ 0.403718] cpuidle: using governor ladder [ 0.403718] cpuidle: using governor menu [ 0.403718] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.403718] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved) [ 0.403718] PCI: Using configuration type 1 for base access [ 0.403718] PCI: Using configuration type 1 for extended access [ 0.403718] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.403718] mtrr: probably your BIOS does not setup all CPUs. [ 0.403718] mtrr: corrected configuration. [ 0.403718] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.407292] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.407292] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.407292] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.407292] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.410091] ACPI: Added _OSI(Module Device) [ 0.410091] ACPI: Added _OSI(Processor Device) [ 0.410091] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.410091] ACPI: Added _OSI(Processor Aggregator Device) [ 0.414472] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.429868] ACPI: Interpreter enabled [ 0.429868] ACPI: PM: (supports S0 S3 S4 S5) [ 0.429868] ACPI: Using IOAPIC for interrupt routing [ 0.429868] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.429868] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.429868] PCI: Using E820 reservations for host bridge windows [ 0.429868] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.438226] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.438232] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.438618] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 conventional PCI endpoint [ 0.438781] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 PCIe Root Port [ 0.438795] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:02.0: enabling Extended Tags [ 0.438838] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.438938] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 PCIe Root Port [ 0.438951] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:04.0: enabling Extended Tags [ 0.438990] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.439079] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 PCIe Root Port [ 0.439091] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:05.0: enabling Extended Tags [ 0.439128] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.439220] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 PCIe Root Port [ 0.439232] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:06.0: enabling Extended Tags [ 0.439270] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.439360] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.439373] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:09.0: enabling Extended Tags [ 0.439412] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.439507] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.439520] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:0a.0: enabling Extended Tags [ 0.439559] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.439657] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.439671] pci 0000:00:11.0: BAR 0 [io 0xf090-0xf097] pci 0000:00:11.0: BAR 1 [io 0xf080-0xf083] pci 0000:00:11.0: BAR 2 [io 0xf070-0xf077] pci 0000:00:11.0: BAR 3 [io 0xf060-0xf063] pci 0000:00:11.0: BAR 4 [io 0xf050-0xf05f] pci 0000:00:11.0: BAR 5 [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.439851] pci 0000:00:12.0: BAR 0 [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.440001] pci 0000:00:12.2: BAR 0 [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.440064] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.440148] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.440162] pci 0000:00:13.0: BAR 0 [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.440297] pci 0000:00:13.2: BAR 0 [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.440360] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.440446] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.440572] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.440585] pci 0000:00:14.1: BAR 0 [io 0xf040-0xf047] pci 0000:00:14.1: BAR 1 [io 0xf030-0xf033] pci 0000:00:14.1: BAR 2 [io 0xf020-0xf027] pci 0000:00:14.1: BAR 3 [io 0xf010-0xf013] pci 0000:00:14.1: BAR 4 [io 0xf000-0xf00f] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.440633] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.440635] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.440637] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.440728] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint [ 0.440745] pci 0000:00:14.2: BAR 0 [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.440878] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.441019] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.441044] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.441053] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.441166] pci 0000:00:14.5: BAR 0 [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.441302] pci 0000:00:16.0: BAR 0 [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.441437] pci 0000:00:16.2: BAR 0 [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.441500] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.441591] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.441647] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.441699] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.441751] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.441809] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.441869] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.441965] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.441980] pci 0000:01:00.0: BAR 0 [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: BAR 2 [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: BAR 4 [io 0xe000-0xe0ff] pci 0000:01:00.0: BAR 5 [mem 0xfea00000-0xfea3ffff] pci 0000:01:00.0: ROM [mem 0xfea40000-0xfea5ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.442040] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.442090] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.442149] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.442251] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 PCIe Legacy Endpoint [ 0.442265] pci 0000:01:00.1: BAR 0 [mem 0xfea60000-0xfea63fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.442341] pci 0000:01:00.1: supports D1 D2 [ 0.442433] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:02:00.0: [1b4b:9120] type 00 class 0x010601 PCIe Legacy Endpoint [ 0.442489] pci 0000:02:00.0: BAR 0 [io 0xd090-0xd097] pci 0000:02:00.0: BAR 1 [io 0xd080-0xd083] pci 0000:02:00.0: BAR 2 [io 0xd070-0xd077] pci 0000:02:00.0: BAR 3 [io 0xd060-0xd063] pci 0000:02:00.0: BAR 4 [io 0xd050-0xd05f] pci 0000:02:00.0: BAR 5 [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: ROM [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.442566] pci 0000:02:00.0: PME# supported from D3hot [ 0.442643] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.442711] pci 0000:03:00.0: BAR 0 [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 0.442794] pci 0000:03:00.0: supports D1 D2 [ 0.442796] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.442894] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.442957] pci 0000:04:00.0: BAR 0 [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.443039] pci 0000:04:00.0: supports D1 D2 [ 0.443041] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.443137] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 PCIe Endpoint [ 0.443225] pci 0000:05:00.0: BAR 0 [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: BAR 2 [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 0.443314] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.443434] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 PCIe Legacy Endpoint [ 0.443450] pci 0000:05:00.1: BAR 0 [io 0xc140-0xc147] pci 0000:05:00.1: BAR 1 [io 0xc130-0xc133] pci 0000:05:00.1: BAR 2 [io 0xc120-0xc127] pci 0000:05:00.1: BAR 3 [io 0xc110-0xc113] pci 0000:05:00.1: BAR 4 [io 0xc100-0xc10f] pci 0000:05:00.1: ROM [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 0.443553] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.449075] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 PCIe Endpoint [ 0.449160] pci 0000:06:00.0: BAR 0 [mem 0xd0310000-0xd031ffff 64bit pref] pci 0000:06:00.0: BAR 2 [mem 0xd0300000-0xd030ffff 64bit pref] pci 0000:06:00.0: ROM [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.449427] pci 0000:00:0a.0: PCI bridge to [bus 06] pci_bus 0000:07: extended config space not accessible [ 0.449478] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 conventional PCI endpoint [ 0.449519] pci 0000:07:06.0: BAR 0 [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 0.449672] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.449680] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.449682] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.449685] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.449687] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.449689] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.449691] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.450335] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.450394] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.450454] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.450513] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.450563] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.450602] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.450640] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.450679] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.450869] iommu: Default domain type: Translated [ 0.450869] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.450869] pps_core: LinuxPPS API ver. 1 registered [ 0.450869] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.450869] PTP clock support registered [ 0.450869] EDAC MC: Ver: 3.0.0 [ 0.450869] NetLabel: Initializing [ 0.450869] NetLabel: domain hash size = 128 [ 0.450869] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.450869] NetLabel: unlabeled traffic allowed by default [ 0.450869] PCI: Using ACPI for IRQ routing [ 0.457938] PCI: pci_cache_line_size set to 64 bytes [ 0.458000] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf05000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.458032] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.458032] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.458032] vgaarb: loaded [ 0.458032] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.458032] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.459218] clocksource: Switched to clocksource tsc-early [ 0.459226] VFS: Disk quotas dquot_6.6.0 [ 0.459226] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.459226] AppArmor: AppArmor Filesystem Enabled [ 0.459226] pnp: PnP ACPI init [ 0.459226] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.459226] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.459226] system 00:03: [io 0x040b] has been reserved [ 0.459226] system 00:03: [io 0x04d6] has been reserved [ 0.459226] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.459226] system 00:03: [io 0x0c14] has been reserved [ 0.459226] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.459226] system 00:03: [io 0x0c52] has been reserved [ 0.459226] system 00:03: [io 0x0c6c] has been reserved [ 0.459226] system 00:03: [io 0x0c6f] has been reserved [ 0.459226] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.459226] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.459226] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.459226] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.459226] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.459226] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.459226] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.459226] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.459226] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.459226] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.459226] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.459226] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.459226] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.459226] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.459226] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.459226] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.459226] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.459226] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.459258] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.459750] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 0.467018] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.467322] NET: Registered PF_INET protocol family [ 0.467695] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.486963] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.487028] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.487385] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.487993] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.488277] TCP: Hash tables configured (established 262144 bind 65536) [ 0.488595] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.488785] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.488923] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.489065] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.489078] NET: Registered PF_XDP protocol family [ 0.489101] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 20200 usecs [ 0.525969] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 15448 usecs [ 0.541961] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 15431 usecs [ 0.557961] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 15612 usecs [ 0.558202] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.558548] PCI: CLS 64 bytes, default 64 [ 0.558645] Trying to unpack rootfs image as initramfs... [ 0.559317] PCI-DMA: Disabling AGP. [ 0.559415] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.559418] PCI-DMA: using GART IOMMU. [ 0.559421] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.560296] software IO TLB: tearing down default memory pool [ 0.565132] LVT offset 0 assigned for vector 0x400 [ 0.567436] perf: AMD IBS detected (0x000000ff) [ 0.567829] amd_uncore: 4 amd_nb counters detected [ 0.569148] Initialise system trusted keyrings [ 0.569167] Key type blacklist registered [ 0.569277] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.569299] zbud: loaded [ 0.569758] fuse: init (API version 7.41) [ 0.570182] integrity: Platform Keyring initialized [ 0.570189] integrity: Machine keyring initialized [ 0.598855] Key type asymmetric registered [ 0.598860] Asymmetric key parser 'x509' registered [ 1.571977] tsc: Refined TSC clocksource calibration: 3093.307 MHz [ 1.572000] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9695414aa, max_idle_ns: 440795309073 ns [ 1.575878] clocksource: Switched to clocksource tsc [ 1.692597] Freeing initrd memory: 134188K [ 1.699192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.699297] io scheduler mq-deadline registered [ 1.701482] ledtrig-cpu: registered to indicate activity on CPUs [ 1.702434] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.703464] Could not retrieve perf counters (-19) [ 1.703776] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.703983] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.704815] Linux agpgart interface v0.103 [ 1.705800] i8042: PNP: No PS/2 controller found. [ 1.705887] mousedev: PS/2 mouse device common for all mice [ 1.705915] rtc_cmos 00:06: RTC can wake from S4 [ 1.706130] rtc_cmos 00:06: registered as rtc0 [ 1.706154] rtc_cmos 00:06: setting system clock to 2025-03-22T12:12:37 UTC (1742645557) [ 1.706183] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.706198] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.706730] NET: Registered PF_INET6 protocol family [ 1.712815] Segment Routing with IPv6 [ 1.712845] In-situ OAM (IOAM) with IPv6 [ 1.712896] mip6: Mobile IPv6 [ 1.712904] NET: Registered PF_PACKET protocol family [ 1.712962] mpls_gso: MPLS GSO support [ 1.712976] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.713566] microcode: Current revision: 0x0600063e [ 1.713568] microcode: Updated early from: 0x06000626 [ 1.713753] IPI shorthand broadcast: enabled [ 1.716256] sched_clock: Marking stable (1712014882, 3843954)->(1735385462, -19526626) [ 1.716473] registered taskstats version 1 [ 1.716645] Loading compiled-in X.509 certificates [ 1.744524] Loaded X.509 cert 'Build time autogenerated kernel key: d2b9f7780b4c1a61ac47e8fa2c108e2eb11543ec' [ 1.747233] Demotion targets for Node 0: null [ 1.747486] Key type .fscrypt registered [ 1.747488] Key type fscrypt-provisioning registered [ 1.756310] cryptd: max_cpu_qlen set to 1000 [ 1.764450] AES CTR mode by8 optimization enabled [ 1.789835] Key type encrypted registered [ 1.789842] AppArmor: AppArmor sha256 policy hashing enabled [ 1.789853] ima: No TPM chip found, activating TPM-bypass! [ 1.789856] ima: Allocated hash algorithm: sha256 [ 1.789868] ima: No architecture policies found [ 1.789892] evm: Initialising EVM extended attributes: [ 1.789893] evm: security.selinux [ 1.789894] evm: security.SMACK64 (disabled) [ 1.789896] evm: security.SMACK64EXEC (disabled) [ 1.789897] evm: security.SMACK64TRANSMUTE (disabled) [ 1.789898] evm: security.SMACK64MMAP (disabled) [ 1.789899] evm: security.apparmor [ 1.789900] evm: security.ima [ 1.789901] evm: security.capability [ 1.789902] evm: HMAC attrs: 0x1 [ 1.802460] RAS: Correctable Errors collector initialized. [ 1.818221] clk: Disabling unused clocks [ 1.818226] PM: genpd: Disabling unused power domains [ 1.837368] Freeing unused decrypted memory: 2028K [ 1.838436] Freeing unused kernel image (initmem) memory: 4220K [ 1.838470] Write protecting the kernel read-only data: 28672k [ 1.838984] Freeing unused kernel image (rodata/data gap) memory: 652K [ 1.906388] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.906404] Run /init as init process [ 1.906407] with arguments: [ 1.906409] /init [ 1.906411] splash [ 1.906412] with environment: [ 1.906414] HOME=/ [ 1.906415] TERM=linux [ 1.906416] BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 [ 2.150509] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.150551] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.167964] ACPI: button: Power Button [PWRF] Floppy drive(s): fd0 is 1.44M [ 2.183823] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.183835] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 2.183915] SCSI subsystem initialized [ 2.184500] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 2.185079] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 2.185694] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 2.186302] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 2.186470] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.189969] FDC 0 is a post-1991 82077 [ 2.205012] ACPI: bus type USB registered [ 2.206125] usbcore: registered new interface driver usbfs [ 2.206152] usbcore: registered new interface driver hub [ 2.206174] usbcore: registered new device driver usb [ 2.238471] ACPI: bus type drm_connector registered [ 2.251345] libata version 3.00 loaded. [ 2.261476] scsi host0: pata_atiixp [ 2.261999] scsi host1: pata_atiixp [ 2.262108] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 lpm-pol 0 [ 2.262113] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 lpm-pol 0 [ 2.262855] pata_via 0000:05:00.1: version 0.3.4 [ 2.263550] scsi host2: pata_via [ 2.264260] scsi host3: pata_via [ 2.264321] ata3: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 34 lpm-pol 0 [ 2.264325] ata4: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 34 lpm-pol 0 [ 2.264439] QUIRK: Enable AMD PLL fix [ 2.264470] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.264478] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.264485] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.264493] ehci-pci 0000:00:12.2: debug port 1 [ 2.264537] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.268858] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 2.268865] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.268868] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.275955] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.275959] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.275961] usb usb1: Product: EHCI Host Controller [ 2.275964] usb usb1: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.275966] usb usb1: SerialNumber: ... [ 2.276126] hub 1-0:1.0: USB hub found [ 2.276135] hub 1-0:1.0: 5 ports detected [ 2.276372] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.276378] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.276382] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.276391] ehci-pci 0000:00:13.2: debug port 1 [ 2.276423] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.288008] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.288124] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.288128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.288130] usb usb2: Product: EHCI Host Controller [ 2.288132] usb usb2: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.288134] usb usb2: SerialNumber: ... [ 2.288290] hub 2-0:1.0: USB hub found [ 2.288310] hub 2-0:1.0: 5 ports detected [ 2.288574] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.288595] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.288601] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.288610] ehci-pci 0000:00:16.2: debug port 1 [ 2.288641] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.303883] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.304005] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.304009] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.304011] usb usb3: Product: EHCI Host Controller [ 2.304013] usb usb3: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.304015] usb usb3: SerialNumber: ... [ 2.304182] hub 3-0:1.0: USB hub found [ 2.304193] hub 3-0:1.0: 4 ports detected [ 2.324056] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.427973] ata1.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 2.427979] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.427984] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.428720] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 2.535957] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.590614] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.591500] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.591510] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 2.591591] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 2.591789] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.591796] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.591811] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.591904] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.591909] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.591912] usb usb4: Product: xHCI Host Controller [ 2.591915] usb usb4: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.591917] usb usb4: SerialNumber: ... [ 2.593212] hub 4-0:1.0: USB hub found [ 2.593231] hub 4-0:1.0: 2 ports detected [ 2.593810] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.593970] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.594038] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.594043] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.594047] usb usb5: Product: xHCI Host Controller [ 2.594049] usb usb5: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.594052] usb usb5: SerialNumber: ... [ 2.594251] ahci 0000:00:11.0: version 3.0 [ 2.594448] hub 5-0:1.0: USB hub found [ 2.595378] hub 5-0:1.0: 2 ports detected [ 2.595565] ahci 0000:00:11.0: AHCI vers 0001.0200, 32 command slots, 6 Gbps, SATA mode [ 2.595570] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 2.595573] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part [ 2.596669] scsi host4: ahci [ 2.597012] scsi host5: ahci [ 2.597182] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.597238] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.597335] scsi host6: ahci [ 2.597468] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.597475] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.597533] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 2.597712] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.597718] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 2.597722] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.597851] scsi host7: ahci [ 2.597933] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 lpm-pol 3 [ 2.597937] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 lpm-pol 3 [ 2.597940] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 lpm-pol 3 [ 2.597943] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 lpm-pol 3 [ 2.597999] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.598004] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.598007] usb usb7: Product: xHCI Host Controller [ 2.598010] usb usb7: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.598012] usb usb7: SerialNumber: ... [ 2.598242] ahci 0000:02:00.0: AHCI vers 0001.0000, 32 command slots, 6 Gbps, SATA mode [ 2.598248] ahci 0000:02:00.0: 2/2 ports implemented (port mask 0x3) [ 2.598251] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.598640] hub 7-0:1.0: USB hub found [ 2.598657] hub 7-0:1.0: 2 ports detected [ 2.598835] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.598881] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.598886] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.598889] usb usb8: Product: xHCI Host Controller [ 2.598892] usb usb8: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.598894] usb usb8: SerialNumber: ... [ 2.599042] scsi host8: ahci [ 2.599167] hub 8-0:1.0: USB hub found [ 2.599185] hub 8-0:1.0: 2 ports detected [ 2.602248] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.602269] sd 0:0:0:0: [sda] Write Protect is off [ 2.602273] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.602302] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.602350] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.603549] scsi host9: ahci [ 2.603634] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 lpm-pol 0 [ 2.603637] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 lpm-pol 0 [ 2.644356] sda: sda1 sda2 [ 2.644543] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.660064] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.660069] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.660072] usb usb6: Product: OHCI PCI host controller [ 2.660074] usb usb6: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.660076] usb usb6: SerialNumber: ... [ 2.660247] hub 6-0:1.0: USB hub found [ 2.660259] hub 6-0:1.0: 5 ports detected [ 2.660685] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.660692] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.660713] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.680278] usb 2-1: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 2.680284] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.680577] hub 2-1:1.0: USB hub found [ 2.680674] hub 2-1:1.0: 2 ports detected [ 2.719990] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.719995] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.719997] usb usb9: Product: OHCI PCI host controller [ 2.719999] usb usb9: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.720001] usb usb9: SerialNumber: ... [ 2.720291] hub 9-0:1.0: USB hub found [ 2.720303] hub 9-0:1.0: 5 ports detected [ 2.720788] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.720798] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.720818] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.779985] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.779989] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.779992] usb usb10: Product: OHCI PCI host controller [ 2.779993] usb usb10: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.779995] usb usb10: SerialNumber: ... [ 2.780207] hub 10-0:1.0: USB hub found [ 2.780218] hub 10-0:1.0: 2 ports detected [ 2.780553] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.780563] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.780591] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.840019] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.840025] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.840027] usb usb11: Product: OHCI PCI host controller [ 2.840029] usb usb11: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.840031] usb usb11: SerialNumber: ... [ 2.840249] hub 11-0:1.0: USB hub found [ 2.840260] hub 11-0:1.0: 4 ports detected [ 2.852063] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.907782] ata8: SATA link down (SStatus 0 SControl 300) [ 2.907873] ata6: SATA link down (SStatus 0 SControl 300) [ 2.916057] usb 6-1: new full-speed USB device number 2 using ohci-pci [ 2.976123] usb 9-2: new low-speed USB device number 2 using ohci-pci [ 3.064026] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.064057] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.064165] ata7.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 3.064212] ata7.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 3.064341] ata7.00: configured for UDMA/133 [ 3.065084] ata5.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 3.065326] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.066570] ata5.00: configured for UDMA/133 [ 3.066919] scsi 4:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.067340] sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.067348] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 3.067359] sd 4:0:0:0: [sdb] Write Protect is off [ 3.067362] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.067383] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.067421] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.067506] scsi 6:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 3.067940] sd 6:0:0:0: [sdc] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 3.067953] sd 6:0:0:0: [sdc] Write Protect is off [ 3.067956] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.067973] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.068005] sd 6:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 3.071966] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 330) [ 3.073240] ata10.00: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 3.074707] ata10.00: configured for UDMA/133 [ 3.075873] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 330) [ 3.077878] ata9.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 3.078810] ata9.00: configured for UDMA/133 [ 3.086073] scsi 8:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 3.088318] sdc: sdc1 sdc2 sdc3 sdc4 [ 3.088553] sd 6:0:0:0: [sdc] Attached SCSI disk [ 3.095041] usb 6-1: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 3.095046] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.095048] usb 6-1: Product: USB Device [ 3.095050] usb 6-1: Manufacturer: COMPANY [ 3.100418] sdb: sdb1 sdb2 [ 3.100548] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.139115] scsi 9:0:0:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 3.219215] hid: raw HID events driver (C) Jiri Kosina [ 3.243242] usbcore: registered new interface driver usbhid [ 3.243248] usbhid: USB HID core driver [ 3.246221] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:09DA:FAA8.0001/input/input2 [ 3.503954] usb 2-1.2: new high-speed USB device number 4 using ehci-pci [ 3.612802] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 3.612809] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.612811] usb 2-1.2: Product: 802.11n NIC [ 3.612814] usb 2-1.2: Manufacturer: Realtek [ 3.612815] usb 2-1.2: SerialNumber: ... [ 3.739965] usb 2-3: new high-speed USB device number 5 using ehci-pci [ 3.758064] sr 8:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.758072] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.779879] usb 6-2: new full-speed USB device number 3 using ohci-pci [ 3.817975] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 3.856098] hid-generic 0003:09DA:FAA8.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input0 [ 3.856292] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.1/0003:09DA:FAA8.0002/input/input3 [ 3.856401] hid-generic 0003:09DA:FAA8.0002: input,hidraw1: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:12.0-1/input1 [ 3.856739] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input4 [ 3.867035] sr 9:0:0:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.911924] input: COMPANY USB Device as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.2/0003:09DA:FAA8.0003/input/input5 [ 3.912120] hid-generic 0003:09DA:FAA8.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:12.0-1/input2 [ 3.912637] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 3.964060] usb 6-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.964067] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.964070] usb 6-2: Product: A4Tech Gaming Mouse [ 3.964073] usb 6-2: Manufacturer: PixArt [ 3.970335] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:09DA:3519.0004/input/input6 [ 3.970566] hid-generic 0003:09DA:3519.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input0 [ 3.974535] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:09DA:3519.0005/input/input8 [ 4.028049] hid-generic 0003:09DA:3519.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input1 [ 4.100622] usb 2-3: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 4.100628] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 4.100631] usb 2-3: SerialNumber: ... [ 4.731036] usb 9-2: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 4.731042] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.731045] usb 9-2: Product: NOVA AVR [ 4.731047] usb 9-2: Manufacturer: MGE UPS SYSTEMS [ 7.264987] hid-generic 0003:0463:FFFF.0006: hiddev2,hidraw5: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:13.0-2/input0 [ 7.530946] [drm] amdgpu kernel modesetting enabled. [ 7.531202] amdgpu: Virtual CRAT table created for CPU [ 7.531226] amdgpu: Topology: Add CPU node [ 7.531496] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 7.531513] [drm] register mmio base: 0xFEA00000 [ 7.531515] [drm] register mmio size: 262144 [ 7.531664] [drm] add ip block number 0 <vi_common> [ 7.531667] [drm] add ip block number 1 <gmc_v8_0> [ 7.531668] [drm] add ip block number 2 <tonga_ih> [ 7.531670] [drm] add ip block number 3 <gfx_v8_0> [ 7.531671] [drm] add ip block number 4 <sdma_v3_0> [ 7.531672] [drm] add ip block number 5 <powerplay> [ 7.531674] [drm] add ip block number 6 <dm> [ 7.531676] [drm] add ip block number 7 <uvd_v6_0> [ 7.531677] [drm] add ip block number 8 <vce_v3_0> [ 7.531925] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 7.531929] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 7.532251] [drm] UVD is enabled in VM mode [ 7.532253] [drm] UVD ENC is enabled in VM mode [ 7.532255] [drm] VCE enabled in VM mode [ 7.532300] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 7.533371] Console: switching to colour dummy device 80x25 [ 7.533377] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 7.533379] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 7.533412] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 7.533751] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 7.533755] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 7.533762] [drm] Detected VRAM RAM=8192M, BAR=256M [ 7.533763] [drm] RAM width 256bits GDDR5 [ 7.534089] [drm] amdgpu: 8192M of VRAM memory ready [ 7.534092] [drm] amdgpu: 11997M of GTT memory ready. [ 7.534109] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 7.534477] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 7.535625] [drm] Chained IB support enabled! [ 7.541085] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 7.544188] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 7.546172] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 7.858450] [drm] Display Core v3.2.301 initialized on DCE 11.2 [ 7.920116] [drm] UVD and UVD ENC initialized successfully. [ 8.030046] [drm] VCE initialized successfully. [ 8.030932] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 8.030947] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 8.034833] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 8.035662] [drm] Initialized amdgpu 3.59.0 for 0000:01:00.0 on minor 0 [ 8.051748] fbcon: amdgpudrmfb (fb0) is primary device [ 8.137412] Console: switching to colour frame buffer device 160x64 [ 8.171429] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 8.311863] raid6: sse2x4 gen() 12179 MB/s [ 8.379862] raid6: sse2x2 gen() 11344 MB/s [ 8.447862] raid6: sse2x1 gen() 7829 MB/s [ 8.447864] raid6: using algorithm sse2x4 gen() 12179 MB/s [ 8.515860] raid6: .... xor() 4545 MB/s, rmw enabled [ 8.515863] raid6: using ssse3x2 recovery algorithm [ 8.517759] xor: automatically using best checksumming function avx [ 8.519259] async_tx: api initialized (async) [ 9.683956] random: crng init done [ 9.986623] Btrfs loaded, zoned=yes, fsverity=yes [ 22.808662] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 22.808679] floppy: error 10 while reading block 0 [ 23.177858] EXT4-fs (sdc3): mounted filesystem HASH_359-BBF9-D580-BC9E-CA1D262C8B09 ro with ordered data mode. Quota mode: none. [ 23.289698] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 23.869727] loop: module loaded [ 23.892035] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 23.892123] device-mapper: uevent: version 1.0.3 [ 23.892266] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 23.921394] EXT4-fs (sdc3): re-mounted HASH_359-BBF9-D580-BC9E-CA1D262C8B09 r/w. Quota mode: none. [ 23.931937] lp: driver loaded but no devices found [ 23.938358] ppdev: user-space parallel port driver [ 24.224771] Asymmetric key parser 'pkcs8' registered [ 24.239446] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 24.239528] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 24.239580] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 24.239634] sr 8:0:0:0: Attached scsi generic sg3 type 5 [ 24.241279] sr 9:0:0:0: Attached scsi generic sg4 type 5 [ 24.340453] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 24.340576] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 24.355967] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 24.381884] at24 0-0050: supply vcc not found, using dummy regulator [ 24.390581] mc: Linux media interface: v0.10 [ 24.393923] at24 0-0050: 256 byte spd EEPROM, read-only [ 24.394540] at24 0-0051: supply vcc not found, using dummy regulator [ 24.396571] acpi_cpufreq: overriding BIOS provided _PSD data [ 24.397203] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 24.398899] at24 0-0051: 256 byte spd EEPROM, read-only [ 24.405660] at24 0-0052: supply vcc not found, using dummy regulator [ 24.429512] at24 0-0052: 256 byte spd EEPROM, read-only [ 24.429573] at24 0-0053: supply vcc not found, using dummy regulator [ 24.442622] at24 0-0053: 256 byte spd EEPROM, read-only [ 24.487886] videodev: Linux video capture interface: v2.00 [ 24.809052] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 24.876982] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 24.881602] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 24.882093] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 24.882427] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 24.882759] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 24.883077] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 24.885232] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 24.885457] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 24.885467] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 40000 [ 24.917391] kvm_amd: TSC scaling supported [ 24.917396] kvm_amd: Nested Virtualization enabled [ 24.917398] kvm_amd: Nested Paging enabled [ 24.917400] kvm_amd: LBR virtualization supported [ 24.926991] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11 [ 24.927132] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12 [ 24.927667] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13 [ 24.943778] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14 [ 24.944996] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15 [ 24.951300] MCE: In-kernel MCE decoding enabled. [ 24.971876] Registered IR keymap rc-avermedia-m135a [ 24.975311] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16 [ 24.979792] IR NEC protocol handler initialized [ 25.003975] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 25.004040] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 25.004087] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 25.005383] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 25.005389] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 25.005393] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 25.005395] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 25.005397] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 25.005399] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 25.005401] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 25.005404] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 25.005405] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 25.025833] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input17 [ 25.025918] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input18 [ 25.029418] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input19 [ 25.030627] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input20 [ 25.030860] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input21 [ 25.030955] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input22 [ 25.031064] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input23 [ 25.031167] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input24 [ 25.155870] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 25.155877] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 25.155879] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 25.155882] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.155884] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 25.155885] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.155887] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.155889] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.155891] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.155892] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.155894] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.155896] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.155897] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.155899] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.155900] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.155903] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 25.223983] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 25.307954] tda829x 13-004b: setting tuner address to 60 [ 25.309860] usb 2-1.2: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 25.309868] usb 2-1.2: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 25.309872] usb 2-1.2: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 25.315665] usb 2-1.2: Firmware revision 28.0 (signature 0x88e1) [ 25.387962] tda829x 13-004b: type set to tda8290+75a [ 25.878965] usbcore: registered new interface driver rtl8xxxu [ 25.885732] rtl8xxxu 2-1.2:1.0 wlxd037459855f3: renamed from wlan0 [ 26.131876] usb 2-3: set resolution quirk: cval->res = 384 [ 26.132812] usbcore: registered new interface driver snd-usb-audio [ 26.132965] usb 2-3: Found UVC 1.00 device <unnamed> (046d:0825) [ 26.326292] usbcore: registered new interface driver uvcvideo [ 29.096669] saa7134: saa7133[0]: registered device video2 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 29.096879] saa7134: saa7133[0]: registered device radio0 [ 29.150095] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 29.150176] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 33.190766] NET: Registered PF_ALG protocol family [ 33.231135] Process accounting resumed [ 33.250762] alg: No test for hmac(md4) (hmac(md4-generic)) [ 33.345602] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 33.779216] vboxdrv: loading out-of-tree module taints kernel. [ 33.779226] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 33.816307] vboxdrv: Found 8 processor cores/threads [ 33.816429] rtl8xxxu 2-1.2:1.0 wlxd037459855f3: renamed from wlan0 (while UP) [ 33.844125] vboxdrv: TSC mode is Invariant, tentative frequency 3093307124 Hz [ 33.844131] vboxdrv: Successfully loaded version 7.1.6 r167084 (interface 0x00340001) [ 33.976314] NET: Registered PF_QIPCRTR protocol family [ 34.062116] VBoxNetFlt: Successfully started. [ 34.082602] VBoxNetAdp: Successfully started. [ 34.223927] usb 2-3: reset high-speed USB device number 5 using ehci-pci [ 35.537330] wlxd037459855f3: No basic rates, using min rate instead [ 35.542652] wlxd037459855f3: authenticate with 867BC4DFAEB49A30966267AF9EB06651 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 35.542660] wlxd037459855f3: send auth to 867BC4DFAEB49A30966267AF9EB06651 (try 1/3) [ 35.550050] wlxd037459855f3: authenticated [ 35.551968] wlxd037459855f3: associate with 867BC4DFAEB49A30966267AF9EB06651 (try 1/3) [ 35.554994] wlxd037459855f3: RX AssocResp from 867BC4DFAEB49A30966267AF9EB06651 (capab=0x411 status=0 aid=3) [ 35.555003] wlxd037459855f3: No basic rates, using min rate instead [ 35.556756] usb 2-1.2: rtl8xxxu_bss_info_changed: HT supported [ 35.559005] wlxd037459855f3: associated [ 37.905219] tg3 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full duplex [ 37.905234] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 37.905241] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 357.375544] wlxd037459855f3: deauthenticating from 867BC4DFAEB49A30966267AF9EB06651 by local choice (Reason: 3=DEAUTH_LEAVING) [ 359.634087] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 359.639324] wlxd037459855f3: authenticate with 6C6DEF9152362CC1FFD2B5D63C0AC627 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 359.639335] wlxd037459855f3: send auth to 6C6DEF9152362CC1FFD2B5D63C0AC627 (try 1/3) [ 359.641320] wlxd037459855f3: authenticated [ 359.644672] wlxd037459855f3: associate with 6C6DEF9152362CC1FFD2B5D63C0AC627 (try 1/3) [ 359.654304] wlxd037459855f3: RX AssocResp from 6C6DEF9152362CC1FFD2B5D63C0AC627 (capab=0x411 status=0 aid=3) [ 359.656052] usb 2-1.2: rtl8xxxu_bss_info_changed: HT supported [ 359.658560] wlxd037459855f3: associated [ 628.904389] amdgpu 0000:01:00.0: amdgpu: Disabling VM faults because of PRT request! [ 868.903702] tg3 0000:06:00.0 enp6s0: Link is down [ 872.462400] tg3 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full duplex [ 872.462415] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 872.462421] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 1019.658449] Non-volatile memory driver v1.3 [ 1024.949153] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 1032.050725] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 1032.050743] floppy: error 10 while reading block 0 [ 1045.970469] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 1045.970487] floppy: error 10 while reading block 0 [ 1051.341749] Bluetooth: Core ver 2.22 [ 1051.341785] NET: Registered PF_BLUETOOTH protocol family [ 1051.341789] Bluetooth: HCI device and connection manager initialized [ 1051.341794] Bluetooth: HCI socket layer initialized [ 1051.341799] Bluetooth: L2CAP socket layer initialized [ 1051.341804] Bluetooth: SCO socket layer initialized [ 1066.162733] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 1066.162745] floppy: error 10 while reading block 0 [ 1122.912247] tg3 0000:06:00.0 enp6s0: Link is down [ 1130.781116] tg3 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full duplex [ 1130.781130] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 1130.781136] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 1194.715271] tg3 0000:06:00.0 enp6s0: Link is down [ 1215.674929] tg3 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full duplex [ 1215.674962] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 1215.674973] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 1284.930620] tg3 0000:06:00.0 enp6s0: Link is down [ 1310.131376] tg3 0000:06:00.0 enp6s0: Link is up at 100 Mbps, full duplex [ 1310.131414] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 1310.131424] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 1347.368939] wlxd037459855f3: deauthenticating from 6C6DEF9152362CC1FFD2B5D63C0AC627 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1348.682878] watchdog: watchdog0: watchdog did not stop!