Probe #e7527331d5 of ASUSTek P5GC-MX Desktop Computer

Log: hwinfo

11: PCI 1f.2: 0101 IDE interface (PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering) [Created at pci.386] Unique ID: w7Y8.bEcY2d8G0Z0 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel NM10/ICH7 Family SATA Controller [IDE mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c0 "NM10/ICH7 Family SATA Controller [IDE mode]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x2601 Revision: 0x01 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0xb800-0xb807 (rw) I/O Ports: 0xb400-0xb403 (rw) I/O Ports: 0xb000-0xb007 (rw) I/O Ports: 0xa800-0xa803 (rw) I/O Ports: 0xa400-0xa40f (rw) IRQ: 23 (170085 events) Module Alias: "pci:v00008086d000027C0sv00001043sd00002601bc01sc01i8F" Driver Info #0: Driver Status: ata_piix is active Driver Activation Cmd: "modprobe ata_piix" Driver Info #1: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.PZ1iPLkcHs2 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d0 "NM10/ICH7 Family PCI Express Port 1" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 Revision: 0x01 Driver: "pcieport" IRQ: 24 (no events) Module Alias: "pci:v00008086d000027D0sv00001043sd00008179bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 1d.3: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: eEx1.PBCkKs+Wb_2 SysFS ID: /devices/pci0000:00/0000:00:1d.3 SysFS BusID: 0000:00:1d.3 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cb "NM10/ICH7 Family USB UHCI Controller #4" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM, P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xa000-0xa01f (rw) IRQ: 19 (no events) Module Alias: "pci:v00008086d000027CBsv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.U_2bbqNXXI4 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801GB/GR (ICH7 Family) LPC Interface Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27b8 "82801GB/GR (ICH7 Family) LPC Interface Bridge" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM Motherboard" Revision: 0x01 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d000027B8sv00001043sd00008179bc06sc01i00" Driver Info #0: Driver Status: intel_rng is not active Driver Activation Cmd: "modprobe intel_rng" Driver Info #1: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Driver Info #2: Driver Status: leds_ss4200 is not active Driver Activation Cmd: "modprobe leds_ss4200" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 200.0: 0200 Ethernet controller [Created at pci.386] Unique ID: rBUF.GxIm+EUdtcE Parent ID: qTvu.ROwBNUz0Ld3 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Qualcomm Atheros Attansic L2 Fast Ethernet" Vendor: pci 0x1969 "Qualcomm Atheros" Device: pci 0x2048 "Attansic L2 Fast Ethernet" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8233 Revision: 0xa0 Driver: "atl2" Driver Modules: "atl2" Device File: eth0 Memory Range: 0xdffc0000-0xdfffffff (rw,non-prefetchable) Memory Range: 0xdffa0000-0xdffbffff (ro,non-prefetchable,disabled) IRQ: 26 (3235437 events) HW Address: 38C1BC4767F41D6F2287B96EAB6BB4CC Permanent HW Address: 38C1BC4767F41D6F2287B96EAB6BB4CC Link detected: yes Module Alias: "pci:v00001969d00002048sv00001043sd00008233bc02sc00i00" Driver Info #0: Driver Status: atl2 is active Driver Activation Cmd: "modprobe atl2" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (PCI bridge) 16: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.NMJENjm6YD2 SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c9 "NM10/ICH7 Family USB UHCI Controller #2" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM, P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x9400-0x941f (rw) IRQ: 17 (31 events) Module Alias: "pci:v00008086d000027C9sv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.U6QKVB8hRoE SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel NM10/ICH7 Family High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "NM10/ICH7 Family High Definition Audio Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8290 "P5KPL-VM Motherboard" Revision: 0x01 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xdfef8000-0xdfefbfff (rw,non-prefetchable) IRQ: 27 (917 events) Module Alias: "pci:v00008086d000027D8sv00001043sd00008290bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.zXRvsg0ka5E SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244e "82801 PCI Bridge" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 Revision: 0xe1 Module Alias: "pci:v00008086d0000244Esv00001043sd00008179bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.AqEO3v7RvY5 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel NM10/ICH7 Family SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27da "NM10/ICH7 Family SMBus Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM Motherboard" Revision: 0x01 Driver: "i801_smbus" Driver Modules: "i2c_i801" I/O Ports: 0x400-0x41f (rw) IRQ: 23 (170085 events) Module Alias: "pci:v00008086d000027DAsv00001043sd00008179bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.tNcSuRlDuVD SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel 82945G/GZ/P/PL Memory Controller Hub" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2770 "82945G/GZ/P/PL Memory Controller Hub" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x817a "P5LD2-VM Mainboard" Revision: 0x02 Module Alias: "pci:v00008086d00002770sv00001043sd0000817Abc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: qTvu.ROwBNUz0Ld3 SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d2 "NM10/ICH7 Family PCI Express Port 2" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 Revision: 0x01 Driver: "pcieport" IRQ: 25 (no events) Module Alias: "pci:v00008086d000027D2sv00001043sd00008179bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1f.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: 3p2J.gd5eUdx1QNF SysFS ID: /devices/pci0000:00/0000:00:1f.1 SysFS BusID: 0000:00:1f.1 Hardware Class: storage Model: "Intel 82801G (ICH7 Family) IDE Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27df "82801G (ICH7 Family) IDE Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM Motherboard" Revision: 0x01 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xffa0-0xffaf (rw) IRQ: 22 (no events) Module Alias: "pci:v00008086d000027DFsv00001043sd00008179bc01sc01i8A" Driver Info #0: Driver Status: ata_piix is active Driver Activation Cmd: "modprobe ata_piix" Driver Info #1: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.umF_rHup3c2 SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27ca "NM10/ICH7 Family USB UHCI Controller #3" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM, P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x9800-0x981f (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d000027CAsv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.sxMUu8fP0r1 SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c8 "NM10/ICH7 Family USB UHCI Controller #1" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM, P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x9000-0x901f (rw) IRQ: 20 (no events) Module Alias: "pci:v00008086d000027C8sv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: _Znp.slqCJmIuch9 SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel 945G" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2772 "945G" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x817a Revision: 0x02 Memory Range: 0xdfe00000-0xdfe7ffff (rw,non-prefetchable) I/O Ports: 0x8800-0x8807 (rw) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) Memory Range: 0xdfe80000-0xdfebffff (rw,non-prefetchable) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 11 (no events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d00002772sv00001043sd0000817Abc03sc00i00" Driver Info #0: XFree86 v4 Server Module: intel Driver Info #1: XFree86 v4 Server Module: intel 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.Qckf5Vc_eC8 SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB2 EHCI Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cc "NM10/ICH7 Family USB2 EHCI Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5B-MX/WiFi-AP, P5KPL-VM, P5LD2-VM Mainboard" Revision: 0x01 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xdfeffc00-0xdfefffff (rw,non-prefetchable) IRQ: 20 (no events) Module Alias: "pci:v00008086d000027CCsv00001043sd00008179bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.249] Unique ID: KD9E.WjV9fxCiOH8 Parent ID: 3p2J.gd5eUdx1QNF SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "SONY DVD-ROM DDU1615" Vendor: "SONY" Device: "DVD-ROM DDU1615" Revision: "GYN2" Driver: "ata_piix", "sr" Driver Modules: "ata_piix", "sr_mod" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/disk/by-id/ata-SONY_DVD-ROM_..., /dev/disk/by-path/pci-0000:00:1f.1-ata-1, /dev/disk/by-path/pci-0000:00:1f.1-ata-1.0, /dev/dvd, /dev/cdrom Device Number: block 11:0 (char 21:0) Features: DVD, MRW, MRW-W Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (IDE interface) Drive Speed: 48 29: IDE 300.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.l+z5ZOAFrAC Parent ID: w7Y8.bEcY2d8G0Z0 SysFS ID: /class/block/sda SysFS BusID: 3:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata4/host3/target3:0:0/3:0:0:0 Hardware Class: disk Model: "ST3160815AS" Device: "ST3160815AS" Revision: "B" Serial ID: -- Driver: "ata_piix", "sd" Driver Modules: "ata_piix", "sd_mod" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/ata-ST3160815AS_..., /dev/disk/by-path/pci-0000:00:1f.2-ata-2, /dev/disk/by-path/pci-0000:00:1f.2-ata-2.0 Device Number: block 8:0-8:15 BIOS id: 0x80 Geometry (Logical): CHS 19457/255/63 Size: 312581808 sectors a 512 bytes Capacity: 149 GB (160041885696 bytes) Geometry (BIOS EDD): CHS 310101/16/63 Size (BIOS EDD): 312581808 sectors Geometry (BIOS Legacy): CHS 1023/222/30 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (IDE interface) 30: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.gkSaZmjGyhD Parent ID: vayM.NMJENjm6YD2 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.10" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0510dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (USB Controller) 31: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.RTX9xWW_uz4 Parent ID: mvRC.umF_rHup3c2 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.10" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0510dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #23 (USB Controller) 32: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.9T1GDCLyFd9 Parent ID: 5YuN.Qckf5Vc_eC8 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.10" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0510dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (USB Controller) 33: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.CCckIHJirFC Parent ID: eEx1.PBCkKs+Wb_2 SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.10" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0510dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (USB Controller) 34: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.v+N+B0xY+P6 Parent ID: 1GTX.sxMUu8fP0r1 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.10" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0510dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (USB Controller) 35: PS/2 00.0: 10800 Keyboard [Created at input.226] Unique ID: nLyy.+49ps10DtUF Hardware Class: keyboard Model: "AT Translated Set 2 keyboard" Vendor: 0x0001 Device: 0x0001 "AT Translated Set 2 keyboard" Compatible to: int 0x0211 0x0001 Device File: /dev/input/event0 Device Files: /dev/input/event0, /dev/input/by-path/platform-i8042-serio-0-event-kbd Device Number: char 13:64 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 36: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.oV6xZUCQFf1 Hardware Class: mouse Model: "ImPS/2 Generic Wheel Mouse" Vendor: 0x0002 Device: 0x0005 "ImPS/2 Generic Wheel Mouse" Compatible to: int 0x0210 0x0013 Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event3, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse Device Number: char 13:63 (char 13:32) Driver Info #0: Buttons: 3 Wheels: 1 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 37: PS/2 00.0: 10800 Keyboard [Created at input.226] Unique ID: eBDb.gz4y7J01dj0 Hardware Class: keyboard Model: "BRLTTY 6.3 Linux Screen Driver Keyboard" Device: "BRLTTY 6.3 Linux Screen Driver Keyboard" Compatible to: int 0x0211 0x0001 Device File: /dev/input/event10 Device Number: char 13:74 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 38: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.13 "Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 1200 MHz BogoMips: 3999.77 Cache: 1024 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 39: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.13 "Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 1200 MHz BogoMips: 3999.77 Cache: 1024 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 40: None 00.0: 10000 Monitor [Created at fb.71] Unique ID: rdCR.EY_qmtb9YY0 Hardware Class: monitor Model: "Generic Monitor" Vendor: "Generic" Device: "Monitor" Resolution: 800x600@75Hz Year of Manufacture: 0 Week of Manufacture: 0 Driver Info #0: Max. Resolution: 800x600 Vert. Sync Range: 50-90 Hz Hor. Sync Range: 31-48 kHz Config Status: cfg=new, avail=yes, need=no, active=unknown 41: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 42: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: usDW.ndpeucax6V1 Parent ID: rBUF.GxIm+EUdtcE SysFS ID: /class/net/eth0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:02:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "atl2" Driver Modules: "atl2" Device File: eth0 HW Address: 38C1BC4767F41D6F2287B96EAB6BB4CC Permanent HW Address: 38C1BC4767F41D6F2287B96EAB6BB4CC Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (Ethernet controller)


Hardware for Linux and BSD

GitHub