Probe #0d4299fce8 of Supermicro X10DRiB (X10DRi)
Log: smartctl
/dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-107-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Ultrastar 7K2
Device Model: HGST HUS722T1TALA604
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: RAGNWA07
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri May 31 16:29:55 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Disabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x603d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 139 139 021 - 4041
4 Start_Stop_Count -O--CK 100 100 000 - 21
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 024 024 000 - 56083
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 21
16 Gas_Gauge -O---K 105 095 000 - 5669653086043
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 200 200 000 - 2
193 Load_Cycle_Count -O--CK 200 200 000 - 47
194 Temperature_Celsius -O---K 122 109 000 - 21
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0a GPL R/W 8 Device Statistics Notification
0x0c GPL R/O 113 Pending Defects log
0x0d GPL,SL R/O 8 LPS Mis-alignment log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x24 GPL R/O 192 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xb6 GPL,SL VS 16 Device vendor specific log
0xb7 GPL,SL VS 39 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 56069 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 21 Celsius
Power Cycle Min/Max Temperature: 21/21 Celsius
Lifetime Min/Max Temperature: 18/34 Celsius
Specified Max Operating Temperature: 60 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (304)
Index Estimated Time Temperature Celsius
305 2024-05-31 08:32 32 *************
... ..( 13 skipped). .. *************
319 2024-05-31 08:46 32 *************
320 2024-05-31 08:47 31 ************
... ..( 79 skipped). .. ************
400 2024-05-31 10:07 31 ************
401 2024-05-31 10:08 32 *************
... ..(129 skipped). .. *************
53 2024-05-31 12:18 32 *************
54 2024-05-31 12:19 31 ************
... ..( 57 skipped). .. ************
112 2024-05-31 13:17 31 ************
113 2024-05-31 13:18 32 *************
... ..( 69 skipped). .. *************
183 2024-05-31 14:28 32 *************
184 2024-05-31 14:29 31 ************
... ..(107 skipped). .. ************
292 2024-05-31 16:17 31 ************
293 2024-05-31 16:18 ? -
294 2024-05-31 16:19 21 **
295 2024-05-31 16:20 21 **
296 2024-05-31 16:21 ? -
297 2024-05-31 16:22 21 **
298 2024-05-31 16:23 21 **
299 2024-05-31 16:24 21 **
300 2024-05-31 16:25 22 ***
301 2024-05-31 16:26 ? -
302 2024-05-31 16:27 21 **
303 2024-05-31 16:28 21 **
304 2024-05-31 16:29 21 **
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 21 -D- Lifetime Power-On Resets
0x01 0x010 4 56083 -D- Power-on Hours
0x01 0x018 6 5434065879655 -D- Logical Sectors Written
0x01 0x020 6 16184407264 -D- Number of Write Commands
0x01 0x028 6 235587206388 -D- Logical Sectors Read
0x01 0x030 6 1420730096 -D- Number of Read Commands
0x01 0x038 6 35337088 -D- Date and Time TimeStamp
0x01 0x048 2 10555 ND- Workload Utilization
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 56083 -D- Spindle Motor Power-on Hours
0x03 0x010 4 56077 -D- Head Flying Hours
0x03 0x018 4 50 -D- Head Load Events
0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors
0x03 0x028 4 16 -D- Read Recovery Attempts
0x03 0x030 4 0 -D- Number of Mechanical Start Failures
0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 2 -D- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 -D- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 21 -D- Current Temperature
0x05 0x010 1 30 -D- Average Short Term Temperature
0x05 0x018 1 29 -D- Average Long Term Temperature
0x05 0x020 1 34 -D- Highest Temperature
0x05 0x028 1 20 -D- Lowest Temperature
0x05 0x030 1 33 -D- Highest Average Short Term Temperature
0x05 0x038 1 26 -D- Lowest Average Short Term Temperature
0x05 0x040 1 31 -D- Highest Average Long Term Temperature
0x05 0x048 1 27 -D- Lowest Average Long Term Temperature
0x05 0x050 4 0 -D- Time in Over-Temperature
0x05 0x058 1 60 -D- Specified Maximum Operating Temperature
0x05 0x060 4 0 -D- Time in Under-Temperature
0x05 0x068 1 0 -D- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 108 -D- Number of Hardware Resets
0x06 0x010 4 63 -D- Number of ASR Events
0x06 0x018 4 0 -D- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 0 Vendor specific