/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.75-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 EVO Plus 1TB Serial Number: -- Firmware Version: 4B2QEXM7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 6 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Utilization: 9,984,598,016 [9.98 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Sun Nov 20 18:09:37 2022 MSK Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.54W - - 0 0 0 0 0 0 1 + 7.54W - - 1 1 1 1 0 200 2 + 7.54W - - 2 2 2 2 0 1000 3 - 0.0500W - - 3 3 3 3 2000 1200 4 - 0.0050W - - 4 4 4 4 500 9500 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 40 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 2% Data Units Read: 22,064,177 [11.2 TB] Data Units Written: 30,153,540 [15.4 TB] Host Read Commands: 236,043,459 Host Write Commands: 354,794,199 Controller Busy Time: 3,525 Power Cycles: 141 Power On Hours: 1,669 Unsafe Shutdowns: 18 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 40 Celsius Temperature Sensor 2: 44 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.75-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: KINGSTON SH103S390G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: 526ABBF0 User Capacity: 90,028,302,336 bytes [90.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Nov 20 18:09:37 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 36) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO--CK 120 120 050 - 0/0 5 Retired_Block_Count PO--CK 100 100 003 - 0 9 Power_On_Hours_and_Msec -O--CK 050 050 000 - 44053h+25m+00.280s 12 Power_Cycle_Count -O--CK 099 099 000 - 1186 171 Program_Fail_Count -O-R-- 000 000 000 - 0 172 Erase_Fail_Count -O--CK 000 000 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 801 177 Wear_Range_Delta ------ 000 000 000 - 4 181 Program_Fail_Count -O-R-- 000 000 000 - 0 182 Erase_Fail_Count -O--CK 000 000 000 - 0 187 Reported_Uncorrect -O--C- 100 100 000 - 0 194 Temperature_Celsius -O---K 029 081 000 - 29 (Min/Max -22/81) 195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/0 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/0 204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/0 230 Life_Curve_Status PO--C- 100 100 000 - 100 231 SSD_Life_Left PO--C- 092 092 010 - 0 233 SandForce_Internal -O--CK 000 000 000 - 29438 234 SandForce_Internal -O--CK 000 000 000 - 43397 241 Lifetime_Writes_GiB -O--CK 000 000 000 - 43397 242 Lifetime_Reads_GiB -O--CK 000 000 000 - 244595 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 1 Device Statistics log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 44050 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 127/-127 Celsius Lifetime Min/Max Temperature: -22/-127 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/85 Celsius Temperature History Size (Index): 478 (20) Index Estimated Time Temperature Celsius 21 2022-11-17 10:30 ? - ... ..(457 skipped). .. - 1 2022-11-20 14:50 ? - 2 2022-11-20 15:00 22 *** 3 2022-11-20 15:10 21 ** 4 2022-11-20 15:20 22 *** ... ..( 7 skipped). .. *** 12 2022-11-20 16:40 22 *** 13 2022-11-20 16:50 24 ***** 14 2022-11-20 17:00 25 ****** 15 2022-11-20 17:10 26 ******* 16 2022-11-20 17:20 27 ******** 17 2022-11-20 17:30 27 ******** 18 2022-11-20 17:40 28 ********* 19 2022-11-20 17:50 29 ********** 20 2022-11-20 18:00 29 ********** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 1189 --- Lifetime Power-On Resets 0x01 0x018 6 91015991094 --- Logical Sectors Written 0x01 0x028 6 512953222918 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 73512 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 28 --- Current Temperature 0x05 0x010 1 - --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 29 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x030 1 - --- Highest Average Short Term Temperature 0x05 0x038 1 - --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 0 --- Number of Hardware Resets 0x06 0x010 4 39595 --- Number of ASR Events 0x06 0x018 4 2272 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 10 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 37 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 28 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.75-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.B Device Model: Hitachi HDT721010SLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ST6OA31B User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Nov 20 18:09:38 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 128 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14090) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 235) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 131 131 054 - 116 3 Spin_Up_Time POS--- 152 152 024 - 310 (Average 442) 4 Start_Stop_Count -O--C- 098 098 000 - 8520 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 20 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 123 123 020 - 34 9 Power_On_Hours -O--C- 090 090 000 - 74138 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1816 192 Power-Off_Retract_Count -O--CK 090 090 000 - 13159 193 Load_Cycle_Count -O--C- 090 090 000 - 13159 194 Temperature_Celsius -O---- 133 133 000 - 45 (Min/Max 9/56) 196 Reallocated_Event_Count -O--CK 100 100 000 - 33 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 29 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 29 [0] occurred at disk power-on lifetime: 37657 hours (1569 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 59 00 2a 00 00 02 b8 07 dd e2 00 Error: UNC at LBA = 0x02b807dd = 45615069 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 da d0 00 80 00 00 02 b8 07 87 e0 00 21d+05:30:30.000 READ MULTIPLE EXT 39 da d0 00 08 00 00 02 8e a8 ef e0 00 21d+05:30:30.000 WRITE MULTIPLE EXT 39 da d0 00 08 00 00 01 d2 1e 6f e0 00 21d+05:30:30.000 WRITE MULTIPLE EXT 29 da d0 00 80 00 00 02 b8 07 87 e0 00 21d+05:30:25.400 READ MULTIPLE EXT 29 da d0 00 80 00 00 01 9c 20 bf e0 00 21d+05:30:25.400 READ MULTIPLE EXT Error 28 [3] occurred at disk power-on lifetime: 37657 hours (1569 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 59 00 2a 00 00 02 b8 07 dd e2 00 Error: UNC at LBA = 0x02b807dd = 45615069 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 da d0 00 80 00 00 02 b8 07 87 e0 00 21d+05:30:25.400 READ MULTIPLE EXT 29 da d0 00 80 00 00 01 9c 20 bf e0 00 21d+05:30:25.400 READ MULTIPLE EXT 29 da d0 00 80 00 00 03 f8 27 8f e0 00 21d+05:30:25.300 READ MULTIPLE EXT 39 da d0 00 08 00 00 00 1b 6b af e0 00 21d+05:30:23.700 WRITE MULTIPLE EXT 39 da d0 00 08 00 00 00 5e 00 47 e0 00 21d+05:30:23.700 WRITE MULTIPLE EXT Error 27 [2] occurred at disk power-on lifetime: 37514 hours (1563 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 59 00 2a 00 00 02 b8 07 dd e2 00 Error: UNC at LBA = 0x02b807dd = 45615069 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 da d0 00 80 00 00 02 b8 07 87 e0 00 15d+06:34:17.000 READ MULTIPLE EXT 39 da d0 00 08 00 00 02 79 1a b7 e0 00 15d+06:34:17.000 WRITE MULTIPLE EXT 29 da d0 00 80 00 00 02 b8 07 87 e0 00 15d+06:34:12.400 READ MULTIPLE EXT 29 da d0 00 80 00 00 01 9c 20 bf e0 00 15d+06:34:12.400 READ MULTIPLE EXT 29 da d0 00 80 00 00 03 f8 27 8f e0 00 15d+06:34:12.300 READ MULTIPLE EXT Error 26 [1] occurred at disk power-on lifetime: 37514 hours (1563 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 59 00 2a 00 00 02 b8 07 dd e2 00 Error: UNC at LBA = 0x02b807dd = 45615069 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 da d0 00 80 00 00 02 b8 07 87 e0 00 15d+06:34:12.400 READ MULTIPLE EXT 29 da d0 00 80 00 00 01 9c 20 bf e0 00 15d+06:34:12.400 READ MULTIPLE EXT 29 da d0 00 80 00 00 03 f8 27 8f e0 00 15d+06:34:12.300 READ MULTIPLE EXT 29 da d0 00 08 00 00 00 68 09 0f e0 00 15d+06:34:12.300 READ MULTIPLE EXT 29 da d0 00 08 00 00 00 68 08 9f e0 00 15d+06:34:12.300 READ MULTIPLE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5445 - # 2 Short offline Completed without error 00% 5421 - # 3 Short offline Completed without error 00% 5398 - # 4 Short offline Completed without error 00% 5373 - # 5 Short offline Completed without error 00% 5349 - # 6 Short offline Completed without error 00% 5325 - # 7 Extended offline Completed without error 00% 5302 - # 8 Short offline Completed without error 00% 3293 - # 9 Short offline Completed without error 00% 3276 - #10 Short offline Completed without error 00% 3263 - #11 Short offline Completed without error 00% 3251 - #12 Short offline Completed without error 00% 3237 - #13 Short offline Completed without error 00% 3221 - #14 Short offline Completed without error 00% 3208 - #15 Short offline Completed without error 00% 3195 - #16 Short offline Completed without error 00% 65284 - #17 Short offline Completed without error 00% 65136 - #18 Short offline Completed without error 00% 65130 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 46 Celsius Power Cycle Min/Max Temperature: 40/46 Celsius Lifetime Min/Max Temperature: 9/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (5) Index Estimated Time Temperature Celsius 6 2022-11-20 16:02 41 ********************** ... ..( 61 skipped). .. ********************** 68 2022-11-20 17:04 41 ********************** 69 2022-11-20 17:05 42 *********************** 70 2022-11-20 17:06 41 ********************** 71 2022-11-20 17:07 42 *********************** ... ..( 12 skipped). .. *********************** 84 2022-11-20 17:20 42 *********************** 85 2022-11-20 17:21 43 ************************ 86 2022-11-20 17:22 42 *********************** 87 2022-11-20 17:23 43 ************************ ... ..( 8 skipped). .. ************************ 96 2022-11-20 17:32 43 ************************ 97 2022-11-20 17:33 44 ************************* ... ..( 19 skipped). .. ************************* 117 2022-11-20 17:53 44 ************************* 118 2022-11-20 17:54 45 ************************** 119 2022-11-20 17:55 45 ************************** 120 2022-11-20 17:56 44 ************************* 121 2022-11-20 17:57 44 ************************* 122 2022-11-20 17:58 45 ************************** ... ..( 7 skipped). .. ************************** 2 2022-11-20 18:06 45 ************************** 3 2022-11-20 18:07 46 *************************** 4 2022-11-20 18:08 45 ************************** 5 2022-11-20 18:09 45 ************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 38 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 39 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.75-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue (SMR) Device Model: WDC WD20EZAZ-00L9GB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Nov 20 18:09:39 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (44220) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 97) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 164 155 021 - 2775 4 Start_Stop_Count -O--CK 096 096 000 - 4718 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 088 088 000 - 9335 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 454 192 Power-Off_Retract_Count -O--CK 200 200 000 - 88 193 Load_Cycle_Count -O--CK 195 195 000 - 15814 194 Temperature_Celsius -O---K 107 095 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 294 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xb9 GPL,SL VS 4 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 12 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 12 [11] occurred at disk power-on lifetime: 4769 hours (198 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 10 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 04:11:23.314 SMART WRITE LOG 60 01 00 00 38 00 00 51 55 db 28 40 00 04:11:23.311 READ FPDMA QUEUED 60 01 00 00 30 00 00 51 55 da 28 40 00 04:11:23.311 READ FPDMA QUEUED 60 01 00 00 28 00 00 51 55 d9 28 40 00 04:11:23.311 READ FPDMA QUEUED 60 01 00 00 20 00 00 51 55 d8 28 40 00 04:11:23.311 READ FPDMA QUEUED Error 11 [10] occurred at disk power-on lifetime: 4769 hours (198 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 10 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 04:11:23.222 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 04:11:23.221 SMART WRITE LOG 60 01 00 00 a0 00 00 51 55 cb 28 40 00 04:11:23.145 READ FPDMA QUEUED 60 01 00 00 98 00 00 51 55 ca 28 40 00 04:11:23.145 READ FPDMA QUEUED 60 01 00 00 90 00 00 51 55 c9 28 40 00 04:11:23.145 READ FPDMA QUEUED Error 10 [9] occurred at disk power-on lifetime: 4769 hours (198 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 10 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 04:11:23.221 SMART WRITE LOG 60 01 00 00 a0 00 00 51 55 cb 28 40 00 04:11:23.145 READ FPDMA QUEUED 60 01 00 00 98 00 00 51 55 ca 28 40 00 04:11:23.145 READ FPDMA QUEUED 60 01 00 00 90 00 00 51 55 c9 28 40 00 04:11:23.145 READ FPDMA QUEUED 60 01 00 00 88 00 00 51 55 c8 28 40 00 04:11:23.145 READ FPDMA QUEUED Error 9 [8] occurred at disk power-on lifetime: 4765 hours (198 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 10 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:05:22.668 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:05:22.575 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:05:22.574 SMART WRITE LOG 61 00 08 00 d0 00 00 00 51 87 00 40 00 00:05:18.330 WRITE FPDMA QUEUED 61 00 08 00 c8 00 00 00 5c 36 38 40 00 00:05:12.761 WRITE FPDMA QUEUED Error 8 [7] occurred at disk power-on lifetime: 4765 hours (198 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 10 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:05:22.575 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:05:22.574 SMART WRITE LOG 61 00 08 00 d0 00 00 00 51 87 00 40 00 00:05:18.330 WRITE FPDMA QUEUED 61 00 08 00 c8 00 00 00 5c 36 38 40 00 00:05:12.761 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:05:12.744 FLUSH CACHE EXT Error 7 [6] occurred at disk power-on lifetime: 4765 hours (198 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 10 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:05:22.574 SMART WRITE LOG 61 00 08 00 d0 00 00 00 51 87 00 40 00 00:05:18.330 WRITE FPDMA QUEUED 61 00 08 00 c8 00 00 00 5c 36 38 40 00 00:05:12.761 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:05:12.744 FLUSH CACHE EXT 61 00 08 00 b8 00 00 00 5c 36 40 40 00 00:05:12.743 WRITE FPDMA QUEUED Error 6 [5] occurred at disk power-on lifetime: 4765 hours (198 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 10 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:04:47.046 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:04:46.967 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:04:46.967 SMART WRITE LOG 61 00 08 00 f0 00 00 01 d7 d4 b8 40 00 00:04:44.605 WRITE FPDMA QUEUED 61 00 08 00 e8 00 00 00 5c 36 30 40 00 00:04:39.027 WRITE FPDMA QUEUED Error 5 [4] occurred at disk power-on lifetime: 4765 hours (198 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 10 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:04:46.967 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:04:46.967 SMART WRITE LOG 61 00 08 00 f0 00 00 01 d7 d4 b8 40 00 00:04:44.605 WRITE FPDMA QUEUED 61 00 08 00 e8 00 00 00 5c 36 30 40 00 00:04:39.027 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:04:39.006 FLUSH CACHE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6220 - # 2 Short offline Completed without error 00% 6196 - # 3 Short offline Completed without error 00% 6173 - # 4 Short offline Completed without error 00% 6149 - # 5 Short offline Completed without error 00% 6125 - # 6 Short offline Completed without error 00% 6101 - # 7 Short offline Completed without error 00% 6077 - # 8 Extended offline Completed without error 00% 6076 - # 9 Short offline Completed without error 00% 4013 - #10 Short offline Completed without error 00% 3997 - #11 Short offline Completed without error 00% 3983 - #12 Short offline Completed without error 00% 3971 - #13 Short offline Completed without error 00% 3958 - #14 Short offline Completed without error 00% 3942 - #15 Short offline Completed without error 00% 3928 - #16 Short offline Completed without error 00% 3915 - #17 Short offline Completed without error 00% 1099 - #18 Short offline Completed without error 00% 335 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 29/36 Celsius Lifetime Min/Max Temperature: 14/48 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (418) Index Estimated Time Temperature Celsius 419 2022-11-20 10:12 36 ***************** ... ..( 23 skipped). .. ***************** 443 2022-11-20 10:36 36 ***************** 444 2022-11-20 10:37 35 **************** ... ..( 5 skipped). .. **************** 450 2022-11-20 10:43 35 **************** 451 2022-11-20 10:44 34 *************** ... ..( 3 skipped). .. *************** 455 2022-11-20 10:48 34 *************** 456 2022-11-20 10:49 33 ************** ... ..( 4 skipped). .. ************** 461 2022-11-20 10:54 33 ************** 462 2022-11-20 10:55 32 ************* ... ..( 5 skipped). .. ************* 468 2022-11-20 11:01 32 ************* 469 2022-11-20 11:02 31 ************ ... ..( 10 skipped). .. ************ 2 2022-11-20 11:13 31 ************ 3 2022-11-20 11:14 30 *********** ... ..( 14 skipped). .. *********** 18 2022-11-20 11:29 30 *********** 19 2022-11-20 11:30 29 ********** ... ..( 32 skipped). .. ********** 52 2022-11-20 12:03 29 ********** 53 2022-11-20 12:04 30 *********** ... ..( 5 skipped). .. *********** 59 2022-11-20 12:10 30 *********** 60 2022-11-20 12:11 31 ************ ... ..( 6 skipped). .. ************ 67 2022-11-20 12:18 31 ************ 68 2022-11-20 12:19 32 ************* ... ..( 8 skipped). .. ************* 77 2022-11-20 12:28 32 ************* 78 2022-11-20 12:29 33 ************** ... ..( 23 skipped). .. ************** 102 2022-11-20 12:53 33 ************** 103 2022-11-20 12:54 32 ************* 104 2022-11-20 12:55 32 ************* 105 2022-11-20 12:56 33 ************** ... ..( 3 skipped). .. ************** 109 2022-11-20 13:00 33 ************** 110 2022-11-20 13:01 32 ************* ... ..( 4 skipped). .. ************* 115 2022-11-20 13:06 32 ************* 116 2022-11-20 13:07 31 ************ ... ..( 5 skipped). .. ************ 122 2022-11-20 13:13 31 ************ 123 2022-11-20 13:14 30 *********** ... ..( 9 skipped). .. *********** 133 2022-11-20 13:24 30 *********** 134 2022-11-20 13:25 29 ********** ... ..( 12 skipped). .. ********** 147 2022-11-20 13:38 29 ********** 148 2022-11-20 13:39 ? - 149 2022-11-20 13:40 29 ********** 150 2022-11-20 13:41 ? - 151 2022-11-20 13:42 29 ********** 152 2022-11-20 13:43 ? - 153 2022-11-20 13:44 29 ********** 154 2022-11-20 13:45 ? - 155 2022-11-20 13:46 30 *********** 156 2022-11-20 13:47 29 ********** 157 2022-11-20 13:48 30 *********** ... ..( 7 skipped). .. *********** 165 2022-11-20 13:56 30 *********** 166 2022-11-20 13:57 31 ************ ... ..( 12 skipped). .. ************ 179 2022-11-20 14:10 31 ************ 180 2022-11-20 14:11 32 ************* 181 2022-11-20 14:12 32 ************* 182 2022-11-20 14:13 32 ************* 183 2022-11-20 14:14 31 ************ ... ..( 10 skipped). .. ************ 194 2022-11-20 14:25 31 ************ 195 2022-11-20 14:26 32 ************* ... ..( 4 skipped). .. ************* 200 2022-11-20 14:31 32 ************* 201 2022-11-20 14:32 31 ************ ... ..( 9 skipped). .. ************ 211 2022-11-20 14:42 31 ************ 212 2022-11-20 14:43 30 *********** ... ..( 8 skipped). .. *********** 221 2022-11-20 14:52 30 *********** 222 2022-11-20 14:53 31 ************ ... ..( 3 skipped). .. ************ 226 2022-11-20 14:57 31 ************ 227 2022-11-20 14:58 30 *********** ... ..( 26 skipped). .. *********** 254 2022-11-20 15:25 30 *********** 255 2022-11-20 15:26 29 ********** 256 2022-11-20 15:27 30 *********** ... ..( 11 skipped). .. *********** 268 2022-11-20 15:39 30 *********** 269 2022-11-20 15:40 31 ************ ... ..( 4 skipped). .. ************ 274 2022-11-20 15:45 31 ************ 275 2022-11-20 15:46 32 ************* ... ..( 3 skipped). .. ************* 279 2022-11-20 15:50 32 ************* 280 2022-11-20 15:51 33 ************** ... ..( 18 skipped). .. ************** 299 2022-11-20 16:10 33 ************** 300 2022-11-20 16:11 34 *************** ... ..( 5 skipped). .. *************** 306 2022-11-20 16:17 34 *************** 307 2022-11-20 16:18 35 **************** ... ..( 5 skipped). .. **************** 313 2022-11-20 16:24 35 **************** 314 2022-11-20 16:25 36 ***************** ... ..( 3 skipped). .. ***************** 318 2022-11-20 16:29 36 ***************** 319 2022-11-20 16:30 35 **************** ... ..( 12 skipped). .. **************** 332 2022-11-20 16:43 35 **************** 333 2022-11-20 16:44 36 ***************** ... ..( 6 skipped). .. ***************** 340 2022-11-20 16:51 36 ***************** 341 2022-11-20 16:52 34 *************** ... ..( 36 skipped). .. *************** 378 2022-11-20 17:29 34 *************** 379 2022-11-20 17:30 35 **************** ... ..( 10 skipped). .. **************** 390 2022-11-20 17:41 35 **************** 391 2022-11-20 17:42 36 ***************** ... ..( 17 skipped). .. ***************** 409 2022-11-20 18:00 36 ***************** 410 2022-11-20 18:01 35 **************** 411 2022-11-20 18:02 36 ***************** 412 2022-11-20 18:03 35 **************** 413 2022-11-20 18:04 36 ***************** ... ..( 4 skipped). .. ***************** 418 2022-11-20 18:09 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 454 --- Lifetime Power-On Resets 0x01 0x010 4 9335 --- Power-on Hours 0x01 0x018 6 37122158461 --- Logical Sectors Written 0x01 0x020 6 198609088 --- Number of Write Commands 0x01 0x028 6 26806308271 --- Logical Sectors Read 0x01 0x030 6 121214665 --- Number of Read Commands 0x01 0x038 6 3541228928 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 6394 --- Spindle Motor Power-on Hours 0x03 0x010 4 2161 --- Head Flying Hours 0x03 0x018 4 15903 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 1 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 88 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1106 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 36 --- Current Temperature 0x05 0x010 1 34 --- Average Short Term Temperature 0x05 0x018 1 28 --- Average Long Term Temperature 0x05 0x020 1 48 --- Highest Temperature 0x05 0x028 1 15 --- Lowest Temperature 0x05 0x030 1 43 --- Highest Average Short Term Temperature 0x05 0x038 1 20 --- Lowest Average Short Term Temperature 0x05 0x040 1 38 --- Highest Average Long Term Temperature 0x05 0x048 1 25 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 8361 --- Number of Hardware Resets 0x06 0x010 4 3210 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0xff ===== = = === == Vendor Specific Statistics (rev 1) == 0xff 0x008 7 0 --- Vendor Specific 0xff 0x010 7 0 --- Vendor Specific 0xff 0x018 7 0 --- Vendor Specific |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 38 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 40 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 11762 Vendor specific /dev/sdd smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.75-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3250310AS Serial Number: -- Firmware Version: 3.AAA User Capacity: 250,058,268,160 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sun Nov 20 18:09:39 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 92) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 110 078 006 - 109309355 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 090 090 020 - 10722 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 081 060 030 - 122855999 9 Power_On_Hours -O--CK 048 048 000 - 45849 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 094 094 020 - 7013 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 063 042 045 Past 37 (0 23 38 30 0) 194 Temperature_Celsius -O---K 037 058 000 - 37 (0 11 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 067 056 000 - 11821127 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 147 000 - 2850 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 2941 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2941 [0] occurred at disk power-on lifetime: 19241 hours (801 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:08:37.500 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 51 00 1c 2e e0 00 00:08:37.500 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 51 00 1c 2e ed 00 00:08:35.393 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 1d 51 00 1c 2e e0 00 00:08:35.393 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:08:35.269 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 2940 [19] occurred at disk power-on lifetime: 15571 hours (648 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 0f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 15 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 02 65 00 01 90 e0 00 00:10:29.550 READ DMA EXT 25 00 00 00 40 00 02 64 00 01 f0 e0 00 00:10:27.690 READ DMA EXT 25 00 00 00 40 00 02 62 00 01 f0 e0 00 00:10:27.689 READ DMA EXT 35 00 00 01 00 00 01 e5 00 d5 70 e0 00 00:10:27.689 WRITE DMA EXT 35 00 00 01 00 00 01 e4 00 d5 70 e0 00 00:10:27.688 WRITE DMA EXT Error 2939 [18] occurred at disk power-on lifetime: 15571 hours (648 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 01 5a 00 f7 f0 e0 00 00:10:09.654 READ DMA EXT 25 00 00 00 40 00 01 58 00 f7 f0 e0 00 00:10:09.805 READ DMA EXT 25 00 00 00 40 00 01 56 00 f7 f0 e0 00 00:10:09.803 READ DMA EXT 25 00 00 00 40 00 01 54 00 f7 f0 e0 00 00:10:09.801 READ DMA EXT 25 00 00 00 40 00 01 52 00 f7 f0 e0 00 00:10:09.798 READ DMA EXT Error 2938 [17] occurred at disk power-on lifetime: 15571 hours (648 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 0f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 15 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 02 aa 00 01 f0 e0 00 00:09:35.828 READ DMA EXT 25 00 00 00 08 00 02 ac 00 01 f0 e0 00 00:09:35.824 READ DMA EXT 25 00 00 00 40 00 02 92 00 01 f0 e0 00 00:09:35.597 READ DMA EXT 25 00 00 00 40 00 02 70 00 03 b0 e0 00 00:09:35.596 READ DMA EXT 25 00 00 00 40 00 02 6e 00 03 f0 e0 00 00:09:36.337 READ DMA EXT Error 2937 [16] occurred at disk power-on lifetime: 19241 hours (801 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:08:37.500 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 51 00 1c 2e e0 00 00:08:37.500 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 51 00 1c 2e ed 00 00:08:35.393 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 1d 51 00 1c 2e e0 00 00:08:35.393 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:08:35.269 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 2936 [15] occurred at disk power-on lifetime: 15571 hours (648 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 0f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 15 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 02 65 00 01 90 e0 00 00:10:29.550 READ DMA EXT 25 00 00 00 40 00 02 64 00 01 f0 e0 00 00:10:27.690 READ DMA EXT 25 00 00 00 40 00 02 62 00 01 f0 e0 00 00:10:27.689 READ DMA EXT 35 00 00 01 00 00 01 e5 00 d5 70 e0 00 00:10:27.689 WRITE DMA EXT 35 00 00 01 00 00 01 e4 00 d5 70 e0 00 00:10:27.688 WRITE DMA EXT Error 2935 [14] occurred at disk power-on lifetime: 15571 hours (648 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 01 5a 00 f7 f0 e0 00 00:10:09.654 READ DMA EXT 25 00 00 00 40 00 01 58 00 f7 f0 e0 00 00:10:09.805 READ DMA EXT 25 00 00 00 40 00 01 56 00 f7 f0 e0 00 00:10:09.803 READ DMA EXT 25 00 00 00 40 00 01 54 00 f7 f0 e0 00 00:10:09.801 READ DMA EXT 25 00 00 00 40 00 01 52 00 f7 f0 e0 00 00:10:09.798 READ DMA EXT Error 2934 [13] occurred at disk power-on lifetime: 15571 hours (648 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 0f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 15 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 02 aa 00 01 f0 e0 00 00:09:35.828 READ DMA EXT 25 00 00 00 08 00 02 ac 00 01 f0 e0 00 00:09:35.824 READ DMA EXT 25 00 00 00 40 00 02 92 00 01 f0 e0 00 00:09:35.597 READ DMA EXT 25 00 00 00 40 00 02 70 00 03 b0 e0 00 00:09:35.596 READ DMA EXT 25 00 00 00 40 00 02 6e 00 03 f0 e0 00 00:09:36.337 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 43985 - # 2 Short offline Completed without error 00% 43961 - # 3 Short offline Completed without error 00% 43938 - # 4 Short offline Completed without error 00% 43914 - # 5 Short offline Completed without error 00% 43890 - # 6 Short offline Completed without error 00% 43866 - # 7 Short offline Completed without error 00% 43842 - # 8 Extended offline Completed without error 00% 43840 - # 9 Short offline Completed without error 00% 42158 - #10 Short offline Completed without error 00% 42141 - #11 Short offline Completed without error 00% 42128 - #12 Short offline Completed without error 00% 42116 - #13 Short offline Completed without error 00% 42103 - #14 Short offline Completed without error 00% 42086 - #15 Short offline Completed without error 00% 42073 - #16 Short offline Completed without error 00% 42060 - #17 Short offline Completed without error 00% 38632 - #18 Short offline Completed without error 00% 38483 - #19 Short offline Interrupted (host reset) 80% 38478 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 39 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 38 Transition from drive PhyRdy to drive PhyNRdy 0x8002 2 0 Vendor specific 0x8003 2 23 Vendor specific 0x8004 2 0 Vendor specific