/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.9-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SK hynix BC711 HFM256GD3JX013N Serial Number: -- Firmware Version: HPS1 PCI Vendor/Subsystem ID: 0x1c5c IEEE OUI Identifier: 0xace42e Total NVM Capacity: 256,060,514,304 [256 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: ace42e ... Local Time is: Fri May 3 17:22:15 2024 -04 Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x001f): Security Format Frmw_DL NS_Mngmt Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.3000W - - 0 0 0 0 5 5 1 + 2.4000W - - 1 1 1 1 30 30 2 + 1.9000W - - 2 2 2 2 100 100 3 - 0.0500W - - 3 3 3 3 1000 1000 4 - 0.0040W - - 3 3 3 3 1000 9000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 32 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 1% Data Units Read: 48,773,228 [24.9 TB] Data Units Written: 28,886,308 [14.7 TB] Host Read Commands: 563,139,776 Host Write Commands: 407,679,121 Controller Busy Time: 966 Power Cycles: 769 Power On Hours: 5,262 Unsafe Shutdowns: 238 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 32 Celsius Temperature Sensor 2: 39 Celsius Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/nvme1n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.9-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WD_BLACK SN770 1TB Serial Number: -- Firmware Version: 731100WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Fri May 3 17:22:15 2024 -04 Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x00df): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Verify Log Page Attributes (0x7e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Log0_FISE_MI Telmtry_Ar_4 Maximum Data Transfer Size: 256 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 88 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.00W 5.00W - 0 0 0 0 0 0 1 + 3.30W 3.00W - 0 0 0 0 0 0 2 + 2.20W 2.00W - 0 0 0 0 0 0 3 - 0.0150W - - 3 3 3 3 1500 2500 4 - 0.0050W - - 4 4 4 4 10000 6000 5 - 0.0033W - - 5 5 5 5 176000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 30 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 3% Data Units Read: 116,023,627 [59.4 TB] Data Units Written: 119,043,365 [60.9 TB] Host Read Commands: 968,577,563 Host Write Commands: 2,026,070,478 Controller Busy Time: 2,210 Power Cycles: 418 Power On Hours: 11,005 Unsafe Shutdowns: 230 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 48 Celsius Temperature Sensor 2: 30 Celsius Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x4002) /dev/nvme2n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.9-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: CT1000P3PSSD8 Serial Number: -- Firmware Version: P9CR413 PCI Vendor/Subsystem ID: 0x1344 IEEE OUI Identifier: 0x00a075 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 00a075 ... Local Time is: Fri May 3 17:22:15 2024 -04 Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x00d7): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Verify Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 83 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x08): No_ID_Reuse Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.50W - - 0 0 0 0 0 0 1 + 3.00W - - 1 1 1 1 0 0 2 + 1.50W - - 2 2 2 2 0 0 3 - 0.0300W - - 3 3 3 3 5000 2500 4 - 0.0025W - - 4 4 4 4 8000 40000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 1 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 30 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 0% Data Units Read: 6,679 [3.41 GB] Data Units Written: 179,130 [91.7 GB] Host Read Commands: 15,746 Host Write Commands: 1,588,937 Controller Busy Time: 0 Power Cycles: 6 Power On Hours: 0 Unsafe Shutdowns: 5 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 30 Celsius Error Information (NVMe Log 0x01, 16 of 255 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/nvme3n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.9-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: CT1000P3PSSD8 Serial Number: -- Firmware Version: P9CR413 PCI Vendor/Subsystem ID: 0x1344 IEEE OUI Identifier: 0x00a075 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 00a075 ... Local Time is: Fri May 3 17:22:15 2024 -04 Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x00d7): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Verify Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 83 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x08): No_ID_Reuse Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.50W - - 0 0 0 0 0 0 1 + 3.00W - - 1 1 1 1 0 0 2 + 1.50W - - 2 2 2 2 0 0 3 - 0.0300W - - 3 3 3 3 5000 2500 4 - 0.0025W - - 4 4 4 4 8000 40000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 1 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 31 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 0% Data Units Read: 7,823 [4.00 GB] Data Units Written: 154,095 [78.8 GB] Host Read Commands: 17,167 Host Write Commands: 589,746 Controller Busy Time: 0 Power Cycles: 6 Power On Hours: 0 Unsafe Shutdowns: 5 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 31 Celsius Error Information (NVMe Log 0x01, 16 of 255 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.9-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: APPLE HDD HTS541010A9E662 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JA0AB5D0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: Not in smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri May 3 17:22:15 2024 -04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 212) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 208 208 033 - 1 4 Start_Stop_Count -O--C- 093 093 000 - 11983 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 26 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 048 048 000 - 23030 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 2038 160 Unknown_Attribute -O--CK 100 100 000 - 0 191 G-Sense_Error_Rate -O-R-- 095 095 000 - 11 192 Power-Off_Retract_Count -O--CK 099 099 000 - 371 193 Load_Cycle_Count -O--C- 067 067 000 - 334234 194 Temperature_Celsius -O---- 240 240 000 - 25 (Min/Max 13/49) 195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 100 100 000 - 27 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 2 223 Load_Retry_Count -O-R-- 100 100 000 - 0 254 Free_Fall_Sensor -O--CK 100 100 000 - 47 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 7 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 [2] occurred at disk power-on lifetime: 21882 hours (911 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:01:26.697 IDENTIFY DEVICE ec 00 00 00 01 00 00 00 00 00 01 a0 ff 00:01:26.386 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 ff 00:01:26.385 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:01:21.224 IDENTIFY DEVICE ec 00 00 00 01 00 00 00 00 00 01 a0 ff 00:01:20.914 IDENTIFY DEVICE Error 6 [1] occurred at disk power-on lifetime: 21882 hours (911 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:01:21.224 IDENTIFY DEVICE ec 00 00 00 01 00 00 00 00 00 01 a0 ff 00:01:20.914 IDENTIFY DEVICE ec 00 00 00 01 00 00 00 00 00 01 00 ff 00:01:20.913 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:20.861 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 ff 00:01:20.860 IDENTIFY DEVICE Error 5 [0] occurred at disk power-on lifetime: 1729 hours (72 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 4c de b0 00 00 Error: UNC 8 sectors at LBA = 0x004cdeb0 = 5037744 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 10 00 00 00 4c de a8 40 00 00:00:40.016 READ DMA EXT 25 00 00 00 10 00 00 00 4c de a8 40 00 00:00:36.183 READ DMA EXT 25 00 00 00 10 00 00 00 4c de a8 40 00 00:00:32.372 READ DMA EXT 25 00 00 00 10 00 00 00 4c de a8 40 00 00:00:28.483 READ DMA EXT 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:00:28.483 READ LOG EXT Error 4 [3] occurred at disk power-on lifetime: 1729 hours (72 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 4c de b0 00 00 Error: UNC 8 sectors at LBA = 0x004cdeb0 = 5037744 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 10 00 00 00 4c de a8 40 00 00:00:36.183 READ DMA EXT 25 00 00 00 10 00 00 00 4c de a8 40 00 00:00:32.372 READ DMA EXT 25 00 00 00 10 00 00 00 4c de a8 40 00 00:00:28.483 READ DMA EXT 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:00:28.483 READ LOG EXT 60 00 10 00 80 00 00 00 4c de a8 40 00 00:00:24.631 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 13679 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 20/26 Celsius Lifetime Min/Max Temperature: 13/49 Celsius Specified Max Operating Temperature: 27 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (49) Index Estimated Time Temperature Celsius 50 2024-05-03 15:15 27 ******** ... ..( 7 skipped). .. ******** 58 2024-05-03 15:23 27 ******** 59 2024-05-03 15:24 26 ******* 60 2024-05-03 15:25 26 ******* 61 2024-05-03 15:26 24 ***** 62 2024-05-03 15:27 25 ****** 63 2024-05-03 15:28 25 ****** 64 2024-05-03 15:29 26 ******* ... ..( 3 skipped). .. ******* 68 2024-05-03 15:33 26 ******* 69 2024-05-03 15:34 27 ******** 70 2024-05-03 15:35 26 ******* ... ..( 5 skipped). .. ******* 76 2024-05-03 15:41 26 ******* 77 2024-05-03 15:42 27 ******** 78 2024-05-03 15:43 26 ******* ... ..( 6 skipped). .. ******* 85 2024-05-03 15:50 26 ******* 86 2024-05-03 15:51 27 ******** 87 2024-05-03 15:52 26 ******* 88 2024-05-03 15:53 25 ****** 89 2024-05-03 15:54 24 ***** ... ..( 2 skipped). .. ***** 92 2024-05-03 15:57 24 ***** 93 2024-05-03 15:58 25 ****** 94 2024-05-03 15:59 24 ***** ... ..( 2 skipped). .. ***** 97 2024-05-03 16:02 24 ***** 98 2024-05-03 16:03 23 **** ... ..( 3 skipped). .. **** 102 2024-05-03 16:07 23 **** 103 2024-05-03 16:08 24 ***** 104 2024-05-03 16:09 24 ***** 105 2024-05-03 16:10 25 ****** ... ..( 2 skipped). .. ****** 108 2024-05-03 16:13 25 ****** 109 2024-05-03 16:14 26 ******* ... ..( 10 skipped). .. ******* 120 2024-05-03 16:25 26 ******* 121 2024-05-03 16:26 27 ******** 122 2024-05-03 16:27 26 ******* ... ..( 4 skipped). .. ******* 127 2024-05-03 16:32 26 ******* 0 2024-05-03 16:33 25 ****** 1 2024-05-03 16:34 25 ****** 2 2024-05-03 16:35 24 ***** 3 2024-05-03 16:36 23 **** 4 2024-05-03 16:37 24 ***** 5 2024-05-03 16:38 24 ***** 6 2024-05-03 16:39 25 ****** ... ..( 3 skipped). .. ****** 10 2024-05-03 16:43 25 ****** 11 2024-05-03 16:44 26 ******* ... ..( 19 skipped). .. ******* 31 2024-05-03 17:04 26 ******* 32 2024-05-03 17:05 25 ****** 33 2024-05-03 17:06 ? - 34 2024-05-03 17:07 20 * 35 2024-05-03 17:08 21 ** 36 2024-05-03 17:09 22 *** 37 2024-05-03 17:10 23 **** 38 2024-05-03 17:11 23 **** 39 2024-05-03 17:12 24 ***** 40 2024-05-03 17:13 25 ****** 41 2024-05-03 17:14 25 ****** 42 2024-05-03 17:15 25 ****** 43 2024-05-03 17:16 26 ******* 44 2024-05-03 17:17 25 ****** 45 2024-05-03 17:18 26 ******* 46 2024-05-03 17:19 26 ******* 47 2024-05-03 17:20 26 ******* 48 2024-05-03 17:21 25 ****** 49 2024-05-03 17:22 24 ***** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS