/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3320620AS Serial Number: -- Firmware Version: 3.AAK User Capacity: 320 072 933 376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Tue Jul 4 21:38:26 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 22) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 115) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 097 006 - 61430008 3 Spin_Up_Time PO---- 095 095 000 - 0 4 Start_Stop_Count -O--CK 095 095 020 - 5996 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 19 7 Seek_Error_Rate POSR-- 089 060 030 - 812403423 9 Power_On_Hours -O--CK 085 085 000 - 13784 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5918 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 063 054 045 - 37 (Min/Max 23/38) 194 Temperature_Celsius -O---K 037 046 000 - 37 (0 17 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 064 056 000 - 184258478 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 066 000 - 1461 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 693 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 693 [12] occurred at disk power-on lifetime: 12574 hours (523 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 00 77 00 c3 30 e0 00 01:02:45.091 READ DMA EXT 25 00 d8 00 08 00 00 77 00 c3 28 e0 00 01:02:45.090 READ DMA EXT 25 00 d8 00 08 00 00 77 00 c3 20 e0 00 01:02:45.090 READ DMA EXT 25 00 d8 00 08 00 00 77 00 c3 18 e0 00 01:02:45.090 READ DMA EXT 25 00 d8 00 08 00 00 77 00 c3 10 e0 00 01:02:45.090 READ DMA EXT Error 692 [11] occurred at disk power-on lifetime: 12574 hours (523 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 00 7a 00 c3 b0 e0 00 01:02:47.417 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 a8 e0 00 01:02:46.988 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 a0 e0 00 01:02:46.987 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 98 e0 00 01:02:46.987 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 90 e0 00 01:02:46.987 READ DMA EXT Error 691 [10] occurred at disk power-on lifetime: 12574 hours (523 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 00 7a 00 c3 90 e0 00 01:02:46.983 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 88 e0 00 01:02:46.988 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 80 e0 00 01:02:46.987 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 78 e0 00 01:02:46.987 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 70 e0 00 01:02:46.987 READ DMA EXT Error 690 [9] occurred at disk power-on lifetime: 12574 hours (523 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 00 79 00 c3 60 e0 00 01:02:46.043 READ DMA EXT 25 00 d8 00 08 00 00 79 00 c3 58 e0 00 01:02:46.043 READ DMA EXT 25 00 d8 00 08 00 00 79 00 c3 50 e0 00 01:02:46.042 READ DMA EXT 25 00 d8 00 08 00 00 79 00 c3 48 e0 00 01:02:46.042 READ DMA EXT 25 00 d8 00 08 00 00 79 00 c3 40 e0 00 01:02:46.042 READ DMA EXT Error 689 [8] occurred at disk power-on lifetime: 12574 hours (523 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 00 77 00 c3 30 e0 00 01:02:45.091 READ DMA EXT 25 00 d8 00 08 00 00 77 00 c3 28 e0 00 01:02:45.090 READ DMA EXT 25 00 d8 00 08 00 00 77 00 c3 20 e0 00 01:02:45.090 READ DMA EXT 25 00 d8 00 08 00 00 77 00 c3 18 e0 00 01:02:45.090 READ DMA EXT 25 00 d8 00 08 00 00 77 00 c3 10 e0 00 01:02:45.090 READ DMA EXT Error 688 [7] occurred at disk power-on lifetime: 12574 hours (523 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 00 7a 00 c3 b0 e0 00 01:02:47.417 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 a8 e0 00 01:02:46.988 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 a0 e0 00 01:02:46.987 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 98 e0 00 01:02:46.987 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 90 e0 00 01:02:46.987 READ DMA EXT Error 687 [6] occurred at disk power-on lifetime: 12574 hours (523 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 00 7a 00 c3 90 e0 00 01:02:46.983 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 88 e0 00 01:02:46.988 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 80 e0 00 01:02:46.987 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 78 e0 00 01:02:46.987 READ DMA EXT 25 00 d8 00 08 00 00 7a 00 c3 70 e0 00 01:02:46.987 READ DMA EXT Error 686 [5] occurred at disk power-on lifetime: 12574 hours (523 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 00 79 00 c3 60 e0 00 01:02:46.043 READ DMA EXT 25 00 d8 00 08 00 00 79 00 c3 58 e0 00 01:02:46.043 READ DMA EXT 25 00 d8 00 08 00 00 79 00 c3 50 e0 00 01:02:46.042 READ DMA EXT 25 00 d8 00 08 00 00 79 00 c3 48 e0 00 01:02:46.042 READ DMA EXT 25 00 d8 00 08 00 00 79 00 c3 40 e0 00 01:02:46.042 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 60% 12814 - # 2 Extended offline Completed without error 00% 12627 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3250620AS Serial Number: -- Firmware Version: 3.AAJ User Capacity: 250 058 268 160 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Tue Jul 4 21:38:27 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 92) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 120 089 006 - 241657606 3 Spin_Up_Time PO---- 096 095 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 1018 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 7 Seek_Error_Rate POSR-- 087 060 030 - 533455311 9 Power_On_Hours -O--CK 076 076 000 - 21272 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1321 187 Reported_Uncorrect -O--CK 097 097 000 - 3 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 059 040 045 Past 41 (Min/Max 25/41) 194 Temperature_Celsius -O---K 041 060 000 - 41 (0 19 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 069 055 000 - 157733188 197 Current_Pending_Sector -O--C- 001 001 000 - 4294967295 198 Offline_Uncorrectable ----C- 001 001 000 - 4294967295 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 304 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 304 [3] occurred at disk power-on lifetime: 21199 hours (883 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:09:04.160 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 51 00 1c 2e e0 00 00:09:04.159 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 51 00 1c 2e ed 00 00:09:04.159 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 1d 51 00 1c 2e e0 00 00:09:11.144 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:09:11.085 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 303 [2] occurred at disk power-on lifetime: 21199 hours (883 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:09:04.160 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 51 00 1c 2e e0 00 00:09:04.159 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 51 00 1c 2e ed 00 00:09:04.159 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:09:04.159 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:09:03.849 READ MULTIPLE EXT Error 302 [1] occurred at disk power-on lifetime: 21199 hours (883 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:06:25.605 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 51 00 1c 2e e0 00 00:06:25.389 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 51 00 1c 2e ed 00 00:06:25.324 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 1d 51 00 1c 2e e0 00 00:06:23.245 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:06:23.185 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 301 [0] occurred at disk power-on lifetime: 21199 hours (883 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:06:18.346 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 51 00 1c 2e e0 00 00:06:18.346 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 51 00 1c 2e ed 00 00:06:18.346 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:06:23.245 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:06:23.185 READ MULTIPLE EXT Error 300 [19] occurred at disk power-on lifetime: 21199 hours (883 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:09:04.160 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 51 00 1c 2e e0 00 00:09:04.159 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 51 00 1c 2e ed 00 00:09:04.159 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 1d 51 00 1c 2e e0 00 00:09:11.144 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:09:11.085 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 299 [18] occurred at disk power-on lifetime: 21199 hours (883 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:09:04.160 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 51 00 1c 2e e0 00 00:09:04.159 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 51 00 1c 2e ed 00 00:09:04.159 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:09:04.159 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:09:03.849 READ MULTIPLE EXT Error 298 [17] occurred at disk power-on lifetime: 21199 hours (883 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:06:25.605 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 51 00 1c 2e e0 00 00:06:25.389 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 51 00 1c 2e ed 00 00:06:25.324 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 1d 51 00 1c 2e e0 00 00:06:23.245 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:06:23.185 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 297 [16] occurred at disk power-on lifetime: 21199 hours (883 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 51 00 1c 2e ed 00 00:06:18.346 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 51 00 1c 2e e0 00 00:06:18.346 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 51 00 1c 2e ed 00 00:06:18.346 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:06:23.245 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:06:23.185 READ MULTIPLE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 20592 - # 2 Short offline Completed without error 00% 20549 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS