/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-08M2NA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Feb 10 08:34:01 2022 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11520) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 119) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 168 166 021 - 2591 4 Start_Stop_Count -O--CK 094 094 000 - 6775 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 083 083 000 - 12955 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6645 192 Power-Off_Retract_Count -O--CK 198 198 000 - 1634 193 Load_Cycle_Count -O--CK 199 199 000 - 5145 194 Temperature_Celsius -O---K 113 094 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 072 000 - 113493 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 12 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 12 [11] occurred at disk power-on lifetime: 2715 hours (113 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 45 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 45 00 00 00 00 00 00 e0 00 04:04:35.951 SET FEATURES [Set transfer mode] ef 00 03 00 0c 00 00 00 00 00 00 e0 00 04:04:25.904 SET FEATURES [Set transfer mode] ec 00 ff 00 01 00 00 00 00 00 01 e0 00 04:04:24.762 IDENTIFY DEVICE a1 00 ff 00 01 00 00 00 00 00 01 e0 00 04:04:24.426 IDENTIFY PACKET DEVICE ef 00 03 00 45 00 00 00 00 00 00 e0 00 04:03:52.492 SET FEATURES [Set transfer mode] Error 11 [10] occurred at disk power-on lifetime: 2715 hours (113 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 0c 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 0c 00 00 00 00 00 00 e0 00 04:04:25.904 SET FEATURES [Set transfer mode] ec 00 ff 00 01 00 00 00 00 00 01 e0 00 04:04:24.762 IDENTIFY DEVICE a1 00 ff 00 01 00 00 00 00 00 01 e0 00 04:04:24.426 IDENTIFY PACKET DEVICE ef 00 03 00 45 00 00 00 00 00 00 e0 00 04:03:52.492 SET FEATURES [Set transfer mode] ef 00 03 00 0c 00 00 00 00 00 00 e0 00 04:03:42.445 SET FEATURES [Set transfer mode] Error 10 [9] occurred at disk power-on lifetime: 2715 hours (113 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 45 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 45 00 00 00 00 00 00 e0 00 04:03:52.492 SET FEATURES [Set transfer mode] ef 00 03 00 0c 00 00 00 00 00 00 e0 00 04:03:42.445 SET FEATURES [Set transfer mode] ec 00 ff 00 01 00 00 00 00 00 01 e0 00 04:03:41.303 IDENTIFY DEVICE a1 00 ff 00 01 00 00 00 00 00 01 e0 00 04:03:40.967 IDENTIFY PACKET DEVICE 61 00 01 00 00 00 00 00 33 41 08 40 00 03:02:52.015 WRITE FPDMA QUEUED Error 9 [8] occurred at disk power-on lifetime: 2715 hours (113 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 0c 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 0c 00 00 00 00 00 00 e0 00 04:03:42.445 SET FEATURES [Set transfer mode] ec 00 ff 00 01 00 00 00 00 00 01 e0 00 04:03:41.303 IDENTIFY DEVICE a1 00 ff 00 01 00 00 00 00 00 01 e0 00 04:03:40.967 IDENTIFY PACKET DEVICE 61 00 01 00 00 00 00 00 33 41 08 40 00 03:02:52.015 WRITE FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 00 02 03:02:52.014 IDENTIFY DEVICE Error 8 [7] occurred at disk power-on lifetime: 2714 hours (113 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 45 00 00 00 00 00 00 40 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 01 00 00 00 00 00 33 41 08 40 00 03:02:52.015 WRITE FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 00 02 03:02:52.014 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 00 02 03:02:52.014 SET FEATURES [Set transfer mode] ef 00 03 00 0c 00 00 00 00 00 00 00 02 03:02:52.014 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 00 00 00 00 00 02 03:02:52.014 IDENTIFY DEVICE Error 7 [6] occurred at disk power-on lifetime: 2714 hours (113 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 45 00 00 00 00 00 00 00 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 45 00 00 00 00 00 00 00 02 03:02:52.014 SET FEATURES [Set transfer mode] ef 00 03 00 0c 00 00 00 00 00 00 00 02 03:02:52.014 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 00 00 00 00 00 02 03:02:52.014 IDENTIFY DEVICE 61 00 08 00 00 00 00 1f c6 8c 80 40 00 02:45:32.189 WRITE FPDMA QUEUED 61 00 08 00 00 00 00 1f c6 8c 78 40 00 02:45:32.189 WRITE FPDMA QUEUED Error 6 [5] occurred at disk power-on lifetime: 2714 hours (113 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 0c 00 00 00 00 00 00 00 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 0c 00 00 00 00 00 00 00 02 03:02:52.014 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 00 00 00 00 00 02 03:02:52.014 IDENTIFY DEVICE 61 00 08 00 00 00 00 1f c6 8c 80 40 00 02:45:32.189 WRITE FPDMA QUEUED 61 00 08 00 00 00 00 1f c6 8c 78 40 00 02:45:32.189 WRITE FPDMA QUEUED 61 00 08 00 00 00 00 1f c6 8c 70 40 00 02:45:32.189 WRITE FPDMA QUEUED Error 5 [4] occurred at disk power-on lifetime: 2705 hours (112 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 45 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 45 00 00 00 00 00 00 e0 00 00:51:02.796 SET FEATURES [Set transfer mode] ef 00 03 00 0c 00 00 00 00 00 00 e0 00 00:50:52.749 SET FEATURES [Set transfer mode] ec 00 ff 00 01 00 00 00 00 00 01 e0 00 00:50:51.607 IDENTIFY DEVICE a1 00 ff 00 01 00 00 00 00 00 01 e0 00 00:50:51.271 IDENTIFY PACKET DEVICE 61 00 70 00 00 00 00 00 5e b2 a0 40 00 00:39:14.505 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 12061 - # 2 Short offline Completed without error 00% 10598 - # 3 Short offline Completed without error 00% 9547 - # 4 Short offline Completed without error 00% 6902 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 16/30 Celsius Lifetime Min/Max Temperature: 0/49 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (366) Index Estimated Time Temperature Celsius 367 2022-02-10 00:37 24 ***** 368 2022-02-10 00:38 24 ***** 369 2022-02-10 00:39 25 ****** 370 2022-02-10 00:40 25 ****** 371 2022-02-10 00:41 26 ******* ... ..( 2 skipped). .. ******* 374 2022-02-10 00:44 26 ******* 375 2022-02-10 00:45 27 ******** ... ..( 2 skipped). .. ******** 378 2022-02-10 00:48 27 ******** 379 2022-02-10 00:49 28 ********* 380 2022-02-10 00:50 28 ********* 381 2022-02-10 00:51 ? - 382 2022-02-10 00:52 16 - 383 2022-02-10 00:53 16 - 384 2022-02-10 00:54 17 - 385 2022-02-10 00:55 17 - 386 2022-02-10 00:56 18 - 387 2022-02-10 00:57 19 - 388 2022-02-10 00:58 19 - 389 2022-02-10 00:59 20 * 390 2022-02-10 01:00 21 ** 391 2022-02-10 01:01 21 ** 392 2022-02-10 01:02 22 *** 393 2022-02-10 01:03 22 *** 394 2022-02-10 01:04 23 **** 395 2022-02-10 01:05 23 **** 396 2022-02-10 01:06 23 **** 397 2022-02-10 01:07 24 ***** 398 2022-02-10 01:08 24 ***** 399 2022-02-10 01:09 24 ***** 400 2022-02-10 01:10 25 ****** ... ..( 2 skipped). .. ****** 403 2022-02-10 01:13 25 ****** 404 2022-02-10 01:14 26 ******* ... ..( 3 skipped). .. ******* 408 2022-02-10 01:18 26 ******* 409 2022-02-10 01:19 27 ******** ... ..( 4 skipped). .. ******** 414 2022-02-10 01:24 27 ******** 415 2022-02-10 01:25 28 ********* ... ..( 4 skipped). .. ********* 420 2022-02-10 01:30 28 ********* 421 2022-02-10 01:31 29 ********** ... ..( 7 skipped). .. ********** 429 2022-02-10 01:39 29 ********** 430 2022-02-10 01:40 30 *********** ... ..( 7 skipped). .. *********** 438 2022-02-10 01:48 30 *********** 439 2022-02-10 01:49 31 ************ ... ..(113 skipped). .. ************ 75 2022-02-10 03:43 31 ************ 76 2022-02-10 03:44 32 ************* ... ..( 36 skipped). .. ************* 113 2022-02-10 04:21 32 ************* 114 2022-02-10 04:22 33 ************** ... ..(162 skipped). .. ************** 277 2022-02-10 07:05 33 ************** 278 2022-02-10 07:06 32 ************* ... ..( 58 skipped). .. ************* 337 2022-02-10 08:05 32 ************* 338 2022-02-10 08:06 ? - 339 2022-02-10 08:07 19 - 340 2022-02-10 08:08 19 - 341 2022-02-10 08:09 19 - 342 2022-02-10 08:10 20 * 343 2022-02-10 08:11 21 ** 344 2022-02-10 08:12 21 ** 345 2022-02-10 08:13 22 *** 346 2022-02-10 08:14 22 *** 347 2022-02-10 08:15 23 **** 348 2022-02-10 08:16 23 **** 349 2022-02-10 08:17 24 ***** 350 2022-02-10 08:18 24 ***** 351 2022-02-10 08:19 25 ****** ... ..( 2 skipped). .. ****** 354 2022-02-10 08:22 25 ****** 355 2022-02-10 08:23 ? - 356 2022-02-10 08:24 18 - 357 2022-02-10 08:25 18 - 358 2022-02-10 08:26 19 - 359 2022-02-10 08:27 20 * 360 2022-02-10 08:28 20 * 361 2022-02-10 08:29 21 ** 362 2022-02-10 08:30 21 ** 363 2022-02-10 08:31 22 *** 364 2022-02-10 08:32 23 **** 365 2022-02-10 08:33 23 **** 366 2022-02-10 08:34 24 ***** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 6 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 6 R_ERR response for host-to-device data FIS 0x0005 2 8 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 8 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 12 Device-to-host register FISes sent due to a COMRESET 0x000b 2 13 CRC errors within host-to-device FIS 0x000f 2 6 R_ERR response for host-to-device data FIS, CRC 0x0012 2 7 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 3511 Vendor specific