/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.6-zen1-2-zen] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 980 PRO 1TB Serial Number: -- Firmware Version: 5B2QGXA7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 6 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Utilization: 428,855,193,600 [428 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Wed Jan 18 21:22:28 2023 EST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.49W - - 0 0 0 0 0 0 1 + 4.48W - - 1 1 1 1 0 200 2 + 3.18W - - 2 2 2 2 0 1000 3 - 0.0400W - - 3 3 3 3 2000 1200 4 - 0.0050W - - 4 4 4 4 500 9500 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 50 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 2% Data Units Read: 21,317,249 [10.9 TB] Data Units Written: 30,871,020 [15.8 TB] Host Read Commands: 128,671,667 Host Write Commands: 178,089,318 Controller Busy Time: 827 Power Cycles: 482 Power On Hours: 194 Unsafe Shutdowns: 162 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 21 Critical Comp. Temperature Time: 5 Temperature Sensor 1: 50 Celsius Temperature Sensor 2: 53 Celsius Thermal Temp. 1 Transition Count: 20 Thermal Temp. 2 Transition Count: 8 Thermal Temp. 1 Total Time: 1021 Thermal Temp. 2 Total Time: 1234 Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.6-zen1-2-zen] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Travelstar 7K1000 Device Model: HGST HTS721010A9E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JB0OA3J0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jan 18 21:22:28 2023 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 179) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 119 119 033 - 2 4 Start_Stop_Count -O--C- 091 091 000 - 14359 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 064 064 000 - 16043 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 093 093 000 - 11676 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 18612401 193 Load_Cycle_Count -O--C- 001 001 000 - 1022290 194 Temperature_Celsius -O---- 146 146 000 - 41 (Min/Max 14/57) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 7071 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 7085 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7085 [0] occurred at disk power-on lifetime: 4679 hours (194 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:01.347 IDENTIFY DEVICE 00 6f ba 00 01 00 00 00 00 00 01 a0 ff 2d+23:27:59.495 NOP [Reserved subcommand] [OBS-ACS-2] 00 6f ba 00 01 00 00 00 00 00 01 a0 ff 2d+23:27:59.104 NOP [Reserved subcommand] [OBS-ACS-2] 00 6f ba 00 01 00 00 00 00 00 01 a0 ff 2d+23:27:58.544 NOP [Reserved subcommand] [OBS-ACS-2] Error 7084 [3] occurred at disk power-on lifetime: 4679 hours (194 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:01.115 IDENTIFY DEVICE 00 6f ba 00 01 00 00 00 00 00 01 a0 ff 2d+23:28:06.581 NOP [Reserved subcommand] [OBS-ACS-2] 00 6f ba 00 01 00 00 00 00 00 01 a0 ff 2d+23:28:06.190 NOP [Reserved subcommand] [OBS-ACS-2] 00 6f ba 00 01 00 00 00 00 00 01 a0 ff 2d+23:28:05.631 NOP [Reserved subcommand] [OBS-ACS-2] Error 7083 [2] occurred at disk power-on lifetime: 4679 hours (194 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:00.437 IDENTIFY DEVICE 00 7c 9a 00 01 00 00 00 00 00 01 a0 ff 00:00:00.393 NOP [Reserved subcommand] [OBS-ACS-2] 00 7c 9a 00 01 00 00 00 00 00 01 a0 ff 2d+23:28:12.977 NOP [Reserved subcommand] [OBS-ACS-2] 00 7c 9a 00 01 00 00 00 00 00 01 a0 ff 2d+23:28:12.586 NOP [Reserved subcommand] [OBS-ACS-2] 00 7c 9a 00 01 00 00 00 00 00 01 a0 ff 2d+23:28:12.026 NOP [Reserved subcommand] [OBS-ACS-2] Error 7082 [1] occurred at disk power-on lifetime: 4679 hours (194 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 06 40 97 00 00 Error: ICRC, ABRT at LBA = 0x00064097 = 409751 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 b0 00 00 00 06 40 90 40 00 00:00:25.752 READ FPDMA QUEUED 60 00 08 00 a8 00 00 00 06 40 88 40 00 00:00:25.752 READ FPDMA QUEUED 60 00 08 00 a0 00 00 00 06 40 80 40 00 00:00:25.752 READ FPDMA QUEUED 60 00 08 00 98 00 00 00 06 40 78 40 00 00:00:25.752 READ FPDMA QUEUED 60 00 08 00 90 00 00 00 06 40 70 40 00 00:00:25.752 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15314 - # 2 Short offline Completed without error 00% 15300 - # 3 Short offline Completed without error 00% 15288 - # 4 Short offline Completed without error 00% 14675 - # 5 Short offline Completed without error 00% 14665 - # 6 Short offline Completed without error 00% 14658 - # 7 Short offline Completed without error 00% 14650 - # 8 Short offline Completed without error 00% 14642 - # 9 Short offline Completed without error 00% 10472 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 21/48 Celsius Lifetime Min/Max Temperature: 14/57 Celsius Specified Max Operating Temperature: 33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (10) Index Estimated Time Temperature Celsius 11 2023-01-18 19:15 46 *************************** ... ..( 3 skipped). .. *************************** 15 2023-01-18 19:19 46 *************************** 16 2023-01-18 19:20 45 ************************** ... ..( 4 skipped). .. ************************** 21 2023-01-18 19:25 45 ************************** 22 2023-01-18 19:26 44 ************************* ... ..( 5 skipped). .. ************************* 28 2023-01-18 19:32 44 ************************* 29 2023-01-18 19:33 43 ************************ ... ..( 11 skipped). .. ************************ 41 2023-01-18 19:45 43 ************************ 42 2023-01-18 19:46 42 *********************** ... ..( 38 skipped). .. *********************** 81 2023-01-18 20:25 42 *********************** 82 2023-01-18 20:26 43 ************************ 83 2023-01-18 20:27 43 ************************ 84 2023-01-18 20:28 44 ************************* ... ..( 9 skipped). .. ************************* 94 2023-01-18 20:38 44 ************************* 95 2023-01-18 20:39 43 ************************ ... ..( 6 skipped). .. ************************ 102 2023-01-18 20:46 43 ************************ 103 2023-01-18 20:47 42 *********************** ... ..( 6 skipped). .. *********************** 110 2023-01-18 20:54 42 *********************** 111 2023-01-18 20:55 41 ********************** ... ..( 13 skipped). .. ********************** 125 2023-01-18 21:09 41 ********************** 126 2023-01-18 21:10 40 ********************* 127 2023-01-18 21:11 40 ********************* 0 2023-01-18 21:12 41 ********************** 1 2023-01-18 21:13 40 ********************* 2 2023-01-18 21:14 40 ********************* 3 2023-01-18 21:15 41 ********************** ... ..( 6 skipped). .. ********************** 10 2023-01-18 21:22 41 ********************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.6-zen1-2-zen] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT04B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jan 18 21:22:29 2023 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 8871 12 Power_Cycle_Count -O--CK 098 098 000 - 1335 177 Wear_Leveling_Count PO--C- 093 093 000 - 94 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 068 037 000 - 32 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 452 241 Total_LBAs_Written -O--CK 099 099 000 - 59072862949 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 8444 - # 2 Short offline Completed without error 00% 8154 - # 3 Short offline Completed without error 00% 8141 - # 4 Short offline Completed without error 00% 8128 - # 5 Short offline Completed without error 00% 7513 - # 6 Short offline Completed without error 00% 7503 - # 7 Short offline Completed without error 00% 7496 - # 8 Short offline Completed without error 00% 7488 - # 9 Short offline Completed without error 00% 7480 - #10 Short offline Completed without error 00% 3299 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 26/40 Celsius Lifetime Min/Max Temperature: 21/63 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (99) Index Estimated Time Temperature Celsius 100 2023-01-18 00:10 28 ********* ... ..( 3 skipped). .. ********* 104 2023-01-18 00:50 28 ********* 105 2023-01-18 01:00 29 ********** 106 2023-01-18 01:10 29 ********** 107 2023-01-18 01:20 29 ********** 108 2023-01-18 01:30 28 ********* 109 2023-01-18 01:40 28 ********* 110 2023-01-18 01:50 29 ********** ... ..( 5 skipped). .. ********** 116 2023-01-18 02:50 29 ********** 117 2023-01-18 03:00 ? - 118 2023-01-18 03:10 ? - 119 2023-01-18 03:20 30 *********** ... ..( 11 skipped). .. *********** 3 2023-01-18 05:20 30 *********** 4 2023-01-18 05:30 ? - 5 2023-01-18 05:40 ? - 6 2023-01-18 05:50 31 ************ 7 2023-01-18 06:00 ? - 8 2023-01-18 06:10 30 *********** ... ..( 6 skipped). .. *********** 15 2023-01-18 07:20 30 *********** 16 2023-01-18 07:30 31 ************ 17 2023-01-18 07:40 31 ************ 18 2023-01-18 07:50 ? - 19 2023-01-18 08:00 ? - 20 2023-01-18 08:10 31 ************ 21 2023-01-18 08:20 31 ************ 22 2023-01-18 08:30 31 ************ 23 2023-01-18 08:40 30 *********** 24 2023-01-18 08:50 31 ************ 25 2023-01-18 09:00 ? - 26 2023-01-18 09:10 29 ********** 27 2023-01-18 09:20 30 *********** 28 2023-01-18 09:30 31 ************ 29 2023-01-18 09:40 31 ************ 30 2023-01-18 09:50 ? - 31 2023-01-18 10:00 ? - 32 2023-01-18 10:10 ? - 33 2023-01-18 10:20 25 ****** 34 2023-01-18 10:30 27 ******** 35 2023-01-18 10:40 28 ********* 36 2023-01-18 10:50 29 ********** 37 2023-01-18 11:00 29 ********** 38 2023-01-18 11:10 29 ********** 39 2023-01-18 11:20 30 *********** 40 2023-01-18 11:30 30 *********** 41 2023-01-18 11:40 29 ********** 42 2023-01-18 11:50 30 *********** 43 2023-01-18 12:00 30 *********** 44 2023-01-18 12:10 31 ************ 45 2023-01-18 12:20 30 *********** 46 2023-01-18 12:30 ? - 47 2023-01-18 12:40 30 *********** 48 2023-01-18 12:50 30 *********** 49 2023-01-18 13:00 ? - 50 2023-01-18 13:10 28 ********* 51 2023-01-18 13:20 29 ********** 52 2023-01-18 13:30 30 *********** ... ..( 3 skipped). .. *********** 56 2023-01-18 14:10 30 *********** 57 2023-01-18 14:20 31 ************ 58 2023-01-18 14:30 31 ************ 59 2023-01-18 14:40 31 ************ 60 2023-01-18 14:50 30 *********** 61 2023-01-18 15:00 30 *********** 62 2023-01-18 15:10 31 ************ 63 2023-01-18 15:20 30 *********** 64 2023-01-18 15:30 30 *********** 65 2023-01-18 15:40 31 ************ ... ..( 2 skipped). .. ************ 68 2023-01-18 16:10 31 ************ 69 2023-01-18 16:20 32 ************* 70 2023-01-18 16:30 ? - 71 2023-01-18 16:40 ? - 72 2023-01-18 16:50 26 ******* 73 2023-01-18 17:00 27 ******** 74 2023-01-18 17:10 28 ********* 75 2023-01-18 17:20 29 ********** 76 2023-01-18 17:30 30 *********** 77 2023-01-18 17:40 30 *********** 78 2023-01-18 17:50 30 *********** 79 2023-01-18 18:00 29 ********** 80 2023-01-18 18:10 29 ********** 81 2023-01-18 18:20 30 *********** 82 2023-01-18 18:30 32 ************* ... ..( 2 skipped). .. ************* 85 2023-01-18 19:00 32 ************* 86 2023-01-18 19:10 33 ************** 87 2023-01-18 19:20 31 ************ 88 2023-01-18 19:30 31 ************ 89 2023-01-18 19:40 31 ************ 90 2023-01-18 19:50 30 *********** ... ..( 2 skipped). .. *********** 93 2023-01-18 20:20 30 *********** 94 2023-01-18 20:30 31 ************ 95 2023-01-18 20:40 31 ************ 96 2023-01-18 20:50 32 ************* ... ..( 2 skipped). .. ************* 99 2023-01-18 21:20 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1335 --- Lifetime Power-On Resets 0x01 0x010 4 8871 --- Power-on Hours 0x01 0x018 6 59072862949 --- Logical Sectors Written 0x01 0x020 6 526927110 --- Number of Write Commands 0x01 0x028 6 44050585754 --- Logical Sectors Read 0x01 0x030 6 624919746 --- Number of Read Commands 0x01 0x038 6 3274000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 649 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x020 1 63 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 12135 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 6 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.6-zen1-2-zen] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: APPLE HDD ST2000DM001 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: AP54 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Jan 18 21:22:29 2023 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 592) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 220) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 084 006 - 81873176 3 Spin_Up_Time PO---- 095 094 000 - 0 4 Start_Stop_Count -O--CK 051 051 020 - 50909 5 Reallocated_Sector_Ct PO--CK 096 096 036 - 5568 7 Seek_Error_Rate POSR-- 084 060 030 - 4548571345 9 Power_On_Hours -O--CK 065 065 000 - 31470 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 093 093 020 - 7404 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 001 001 000 - 619 188 Command_Timeout -O--CK 100 099 000 - 55835492366 189 High_Fly_Writes -O-RCK 090 090 000 - 10 190 Airflow_Temperature_Cel -O---K 060 040 045 Past 40 (Min/Max 21/48 #8196) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 097 097 000 - 7185 193 Load_Cycle_Count -O--CK 075 075 000 - 51996 194 Temperature_Celsius -O---K 040 060 000 - 40 (128 0 0 0 0) 197 Current_Pending_Sector -O--C- 098 074 000 - 392 198 Offline_Uncorrectable ----C- 098 074 000 - 392 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 28362 (46 8 0) 241 Total_LBAs_Written ------ 100 253 000 - 47270899097 242 Total_LBAs_Read ------ 100 253 000 - 69027236817 254 Free_Fall_Sensor -O--CK 001 001 000 - 118 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 132 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa5 GPL,SL VS 132 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5288 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 619 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 619 [18] occurred at disk power-on lifetime: 31398 hours (1308 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 a5 99 b4 28 00 00 Error: UNC at LBA = 0xa599b428 = 2778313768 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 a5 99 b4 28 40 00 10:45:07.606 READ FPDMA QUEUED 27 00 00 00 00 00 00 00 00 00 00 e0 00 10:45:07.606 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 10:45:07.606 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 10:45:07.606 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 00 10:45:07.605 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 618 [17] occurred at disk power-on lifetime: 31398 hours (1308 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 a5 99 b4 28 00 00 Error: UNC at LBA = 0xa599b428 = 2778313768 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 a5 99 b4 28 40 00 10:45:02.741 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b4 20 40 00 10:45:02.741 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b4 18 40 00 10:45:02.740 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b4 10 40 00 10:45:02.740 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b4 08 40 00 10:45:02.740 READ FPDMA QUEUED Error 617 [16] occurred at disk power-on lifetime: 31398 hours (1308 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 a5 99 b3 18 00 00 Error: UNC at LBA = 0xa599b318 = 2778313496 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 a5 99 b3 18 40 00 10:44:57.513 READ FPDMA QUEUED 27 00 00 00 00 00 00 00 00 00 00 e0 00 10:44:57.512 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 10:44:57.512 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 10:44:57.512 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 00 10:44:57.512 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 616 [15] occurred at disk power-on lifetime: 31398 hours (1308 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 a5 99 b3 18 00 00 Error: UNC at LBA = 0xa599b318 = 2778313496 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 a5 99 b3 18 40 00 10:44:52.374 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b3 10 40 00 10:44:52.374 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b3 08 40 00 10:44:52.374 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b3 00 40 00 10:44:52.374 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b2 f8 40 00 10:44:52.374 READ FPDMA QUEUED Error 615 [14] occurred at disk power-on lifetime: 31398 hours (1308 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 a5 99 b0 68 00 00 Error: UNC at LBA = 0xa599b068 = 2778312808 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 a5 99 b0 68 40 00 10:44:47.519 READ FPDMA QUEUED 27 00 00 00 00 00 00 00 00 00 00 e0 00 10:44:47.519 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 10:44:47.518 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 10:44:47.518 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 00 10:44:47.518 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 614 [13] occurred at disk power-on lifetime: 31398 hours (1308 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 a5 99 b0 68 00 00 Error: UNC at LBA = 0xa599b068 = 2778312808 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 a5 99 b0 68 40 00 10:44:42.501 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b0 60 40 00 10:44:42.501 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b0 58 40 00 10:44:42.501 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b0 50 40 00 10:44:42.501 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 b0 48 40 00 10:44:42.500 READ FPDMA QUEUED Error 613 [12] occurred at disk power-on lifetime: 31398 hours (1308 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 a5 99 a0 e0 00 00 Error: UNC at LBA = 0xa599a0e0 = 2778308832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 a5 99 a0 e0 40 00 10:44:37.268 READ FPDMA QUEUED 27 00 00 00 00 00 00 00 00 00 00 e0 00 10:44:37.262 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 10:44:37.261 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 10:44:37.261 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 00 10:44:37.261 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 612 [11] occurred at disk power-on lifetime: 31398 hours (1308 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 a5 99 a0 e0 00 00 Error: UNC at LBA = 0xa599a0e0 = 2778308832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 a5 99 a0 e0 40 00 10:44:31.989 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 a0 d8 40 00 10:44:31.988 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 a0 d0 40 00 10:44:31.988 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 a0 c8 40 00 10:44:31.988 READ FPDMA QUEUED 60 00 00 00 08 00 00 a5 99 a0 c0 40 00 10:44:31.988 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 30955 - # 2 Short offline Completed without error 00% 30743 - # 3 Short offline Completed: read failure 90% 30730 2775567248 # 4 Short offline Completed: read failure 90% 30717 2775567248 # 5 Short offline Completed without error 00% 30101 - # 6 Short offline Completed without error 00% 30091 - # 7 Short offline Completed without error 00% 30084 - # 8 Short offline Completed without error 00% 30076 - # 9 Short offline Completed without error 00% 30069 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 21/48 Celsius Lifetime Min/Max Temperature: 17/60 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 3/62 Celsius Min/Max Temperature Limit: 0/65 Celsius Temperature History Size (Index): 128 (64) Index Estimated Time Temperature Celsius 65 2023-01-13 16:19 44 ************************* 66 2023-01-13 17:18 48 ***************************** 67 2023-01-13 18:17 ? - 68 2023-01-13 19:16 21 ** 69 2023-01-13 20:15 ? - 70 2023-01-13 21:14 22 *** 71 2023-01-13 22:13 ? - 72 2023-01-13 23:12 36 ***************** 73 2023-01-14 00:11 37 ****************** 74 2023-01-14 01:10 38 ******************* 75 2023-01-14 02:09 ? - 76 2023-01-14 03:08 21 ** 77 2023-01-14 04:07 ? - 78 2023-01-14 05:06 32 ************* 79 2023-01-14 06:05 ? - 80 2023-01-14 07:04 35 **************** 81 2023-01-14 08:03 ? - 82 2023-01-14 09:02 38 ******************* 83 2023-01-14 10:01 40 ********************* 84 2023-01-14 11:00 ? - 85 2023-01-14 11:59 39 ******************** 86 2023-01-14 12:58 ? - 87 2023-01-14 13:57 38 ******************* 88 2023-01-14 14:56 38 ******************* 89 2023-01-14 15:55 ? - 90 2023-01-14 16:54 38 ******************* 91 2023-01-14 17:53 ? - 92 2023-01-14 18:52 38 ******************* 93 2023-01-14 19:51 ? - 94 2023-01-14 20:50 38 ******************* 95 2023-01-14 21:49 40 ********************* 96 2023-01-14 22:48 39 ******************** 97 2023-01-14 23:47 ? - 98 2023-01-15 00:46 20 * 99 2023-01-15 01:45 ? - 100 2023-01-15 02:44 23 **** 101 2023-01-15 03:43 ? - 102 2023-01-15 04:42 31 ************ 103 2023-01-15 05:41 ? - 104 2023-01-15 06:40 38 ******************* 105 2023-01-15 07:39 41 ********************** 106 2023-01-15 08:38 ? - 107 2023-01-15 09:37 41 ********************** 108 2023-01-15 10:36 42 *********************** 109 2023-01-15 11:35 42 *********************** 110 2023-01-15 12:34 40 ********************* 111 2023-01-15 13:33 ? - 112 2023-01-15 14:32 38 ******************* 113 2023-01-15 15:31 37 ****************** ... ..( 5 skipped). .. ****************** 119 2023-01-15 21:25 37 ****************** 120 2023-01-15 22:24 ? - 121 2023-01-15 23:23 36 ***************** 122 2023-01-16 00:22 ? - 123 2023-01-16 01:21 19 - 124 2023-01-16 02:20 ? - 125 2023-01-16 03:19 20 * 126 2023-01-16 04:18 ? - 127 2023-01-16 05:17 29 ********** 0 2023-01-16 06:16 ? - 1 2023-01-16 07:15 36 ***************** 2 2023-01-16 08:14 ? - 3 2023-01-16 09:13 36 ***************** 4 2023-01-16 10:12 37 ****************** 5 2023-01-16 11:11 ? - 6 2023-01-16 12:10 37 ****************** 7 2023-01-16 13:09 ? - 8 2023-01-16 14:08 37 ****************** 9 2023-01-16 15:07 ? - 10 2023-01-16 16:06 37 ****************** 11 2023-01-16 17:05 37 ****************** 12 2023-01-16 18:04 ? - 13 2023-01-16 19:03 37 ****************** 14 2023-01-16 20:02 38 ******************* 15 2023-01-16 21:01 ? - 16 2023-01-16 22:00 38 ******************* 17 2023-01-16 22:59 40 ********************* 18 2023-01-16 23:58 ? - 19 2023-01-17 00:57 19 - 20 2023-01-17 01:56 ? - 21 2023-01-17 02:55 28 ********* 22 2023-01-17 03:54 38 ******************* 23 2023-01-17 04:53 ? - 24 2023-01-17 05:52 38 ******************* 25 2023-01-17 06:51 ? - 26 2023-01-17 07:50 38 ******************* 27 2023-01-17 08:49 39 ******************** 28 2023-01-17 09:48 39 ******************** 29 2023-01-17 10:47 38 ******************* 30 2023-01-17 11:46 39 ******************** 31 2023-01-17 12:45 ? - 32 2023-01-17 13:44 39 ******************** 33 2023-01-17 14:43 41 ********************** 34 2023-01-17 15:42 42 *********************** 35 2023-01-17 16:41 ? - 36 2023-01-17 17:40 42 *********************** 37 2023-01-17 18:39 ? - 38 2023-01-17 19:38 42 *********************** 39 2023-01-17 20:37 40 ********************* 40 2023-01-17 21:36 ? - 41 2023-01-17 22:35 41 ********************** 42 2023-01-17 23:34 ? - 43 2023-01-18 00:33 41 ********************** 44 2023-01-18 01:32 ? - 45 2023-01-18 02:31 42 *********************** 46 2023-01-18 03:30 ? - 47 2023-01-18 04:29 41 ********************** 48 2023-01-18 05:28 ? - 49 2023-01-18 06:27 21 ** 50 2023-01-18 07:26 39 ******************** 51 2023-01-18 08:25 42 *********************** 52 2023-01-18 09:24 ? - 53 2023-01-18 10:23 39 ******************** 54 2023-01-18 11:22 ? - 55 2023-01-18 12:21 29 ********** 56 2023-01-18 13:20 41 ********************** 57 2023-01-18 14:19 41 ********************** 58 2023-01-18 15:18 42 *********************** 59 2023-01-18 16:17 ? - 60 2023-01-18 17:16 21 ** 61 2023-01-18 18:15 40 ********************* 62 2023-01-18 19:14 46 *************************** 63 2023-01-18 20:13 45 ************************** 64 2023-01-18 21:12 43 ************************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS