/dev/sda === START OF INFORMATION SECTION === Device Model: PLEXTOR PX-128M6Pro Serial Number: -- LU WWN Device Id: 5 002303 ... Add. Product Id: NC7020H0 Firmware Version: 1.05 User Capacity: 128 035 676 160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Feb 1 23:15:13 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 10) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0 9 Power_On_Hours -O---- 100 100 000 - 1615 12 Power_Cycle_Count PO---- 100 100 000 - 786 170 Unknown_Attribute -O--CK 100 100 000 - 0 171 Unknown_Attribute PO---- 100 100 000 - 0 172 Unknown_Attribute PO---- 100 100 000 - 0 173 Unknown_Attribute PO---- 100 100 000 - 189 174 Unknown_Attribute PO---- 100 100 000 - 112 175 Program_Fail_Count_Chip PO---- 100 100 000 - 0 176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0 177 Wear_Leveling_Count PO---- 100 100 000 - 193461 178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0 179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 592 181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0 182 Erase_Fail_Count_Total PO---- 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 000 - 0 187 Reported_Uncorrect PO---- 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 12 192 Power-Off_Retract_Count PO---- 100 100 000 - 112 195 Hardware_ECC_Recovered PO---- 100 100 000 - 0 196 Reallocated_Event_Count PO---- 100 100 000 - 0 198 Offline_Uncorrectable PO---- 100 100 000 - 0 199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0 232 Available_Reservd_Space PO---- 100 100 010 - 0 233 Media_Wearout_Indicator PO---- 100 100 000 - 24182 241 Total_LBAs_Written PO---- 100 100 000 - 688333 242 Total_LBAs_Read PO---- 100 100 000 - 1312560 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 0 SMART Log Directory Version 0 Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 2 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 1 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 0 No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (0) Index Estimated Time Temperature Celsius 1 2017-02-01 21:08 ? - ... ..(126 skipped). .. - 0 2017-02-01 23:15 ? - SCT Error Recovery Control: Read: 2 (0,2 seconds) Write: 2 (0,2 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 43 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb === START OF INFORMATION SECTION === Device Model: TOSHIBA HDWD130 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX6OACF0 User Capacity: 3 000 592 982 016 bytes [3,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Feb 1 23:15:13 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (21361) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 356) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 141 141 054 - 66 3 Spin_Up_Time POS--- 132 132 024 - 433 (Average 433) 4 Start_Stop_Count -O--C- 100 100 000 - 1327 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 100 100 000 - 3535 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 395 192 Power-Off_Retract_Count -O--CK 099 099 000 - 1327 193 Load_Cycle_Count -O--C- 099 099 000 - 1327 194 Temperature_Celsius -O---- 120 120 000 - 50 (Min/Max 22/51) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 50 Celsius Power Cycle Min/Max Temperature: 46/50 Celsius Lifetime Min/Max Temperature: 22/51 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (19) Index Estimated Time Temperature Celsius 20 2017-02-01 21:08 47 **************************** ... ..( 7 skipped). .. **************************** 28 2017-02-01 21:16 47 **************************** 29 2017-02-01 21:17 46 *************************** 30 2017-02-01 21:18 47 **************************** 31 2017-02-01 21:19 46 *************************** 32 2017-02-01 21:20 46 *************************** 33 2017-02-01 21:21 47 **************************** 34 2017-02-01 21:22 46 *************************** 35 2017-02-01 21:23 46 *************************** 36 2017-02-01 21:24 47 **************************** ... ..( 15 skipped). .. **************************** 52 2017-02-01 21:40 47 **************************** 53 2017-02-01 21:41 48 ***************************** ... ..( 19 skipped). .. ***************************** 73 2017-02-01 22:01 48 ***************************** 74 2017-02-01 22:02 47 **************************** 75 2017-02-01 22:03 47 **************************** 76 2017-02-01 22:04 48 ***************************** ... ..( 3 skipped). .. ***************************** 80 2017-02-01 22:08 48 ***************************** 81 2017-02-01 22:09 47 **************************** ... ..( 26 skipped). .. **************************** 108 2017-02-01 22:36 47 **************************** 109 2017-02-01 22:37 48 ***************************** ... ..( 3 skipped). .. ***************************** 113 2017-02-01 22:41 48 ***************************** 114 2017-02-01 22:42 47 **************************** 115 2017-02-01 22:43 48 ***************************** ... ..( 8 skipped). .. ***************************** 124 2017-02-01 22:52 48 ***************************** 125 2017-02-01 22:53 47 **************************** ... ..( 7 skipped). .. **************************** 5 2017-02-01 23:01 47 **************************** 6 2017-02-01 23:02 48 ***************************** ... ..( 5 skipped). .. ***************************** 12 2017-02-01 23:08 48 ***************************** 13 2017-02-01 23:09 49 ****************************** ... ..( 3 skipped). .. ****************************** 17 2017-02-01 23:13 49 ****************************** 18 2017-02-01 23:14 50 ******************************* 19 2017-02-01 23:15 50 ******************************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 395 --- Lifetime Power-On Resets 0x01 0x010 4 3535 --- Power-on Hours 0x01 0x018 6 15686411499 --- Logical Sectors Written 0x01 0x020 6 43946325 --- Number of Write Commands 0x01 0x028 6 16538625789 --- Logical Sectors Read 0x01 0x030 6 66273473 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 3324 --- Spindle Motor Power-on Hours 0x03 0x010 4 3324 --- Head Flying Hours 0x03 0x018 4 1327 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 1 --- Read Recovery Attempts 0x03 0x030 4 11 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 50 --- Current Temperature 0x05 0x010 1 44 N-- Average Short Term Temperature 0x05 0x018 1 42 N-- Average Long Term Temperature 0x05 0x020 1 51 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x05 0x030 1 46 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 44 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1164 --- Number of Hardware Resets 0x06 0x010 4 446 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 42 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 30 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS