/dev/sda === START OF INFORMATION SECTION === Device Model: INTEL SSDSC2BW180A3H Serial Number: -- LU WWN Device Id: 5 001517 ... Firmware Version: LCSi User Capacity: 180,045,766,656 bytes [180 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Oct 7 15:31:15 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4395) seconds. Offline data collection capabilities: (0x77) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 8121 (228 34 0) 12 Power_Cycle_Count -O--CK 100 100 000 - 2831 170 Unknown_Attribute PO--CK 100 100 010 - 0 171 Unknown_Attribute -O--CK 100 100 000 - 0 172 Unknown_Attribute -O--CK 100 100 000 - 0 174 Unknown_Attribute -O--CK 100 100 000 - 328 183 Runtime_Bad_Block -O--CK 100 100 010 - 16 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 328 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 225 Unknown_SSD_Attribute -O--CK 100 100 000 - 345919 226 Unknown_SSD_Attribute -O--CK 100 100 000 - 65535 227 Unknown_SSD_Attribute -O--CK 100 100 000 - 58 228 Power-off_Retract_Count -O--CK 100 100 000 - 65535 232 Available_Reservd_Space PO--CK 100 100 010 - 0 233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 241 Total_LBAs_Written -O--CK 100 100 000 - 345919 242 Total_LBAs_Read -O--CK 100 100 000 - 479671 249 Unknown_Attribute PO--C- 100 100 000 - 11068 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 1 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6677 - # 2 Short offline Completed without error 00% 6619 - # 3 Short offline Completed without error 00% 6588 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: 127/-127 Celsius Lifetime Min/Max Temperature: 0/ 0 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 10 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 356 (322) Index Estimated Time Temperature Celsius 323 2020-10-05 04:20 0 - ... ..( 5 skipped). .. - 329 2020-10-05 05:20 0 - 330 2020-10-05 05:30 43 ************************ 331 2020-10-05 05:40 17 - 332 2020-10-05 05:50 0 - 333 2020-10-05 06:00 119 ***************************************+ 334 2020-10-05 06:10 3 - 335 2020-10-05 06:20 0 - 336 2020-10-05 06:30 1 - 337 2020-10-05 06:40 0 - 338 2020-10-05 06:50 1 - 339 2020-10-05 07:00 48 ***************************** 340 2020-10-05 07:10 2 - 341 2020-10-05 07:20 0 - ... ..( 7 skipped). .. - 349 2020-10-05 08:40 0 - 350 2020-10-05 08:50 28 ********* 351 2020-10-05 09:00 0 - ... ..( 7 skipped). .. - 3 2020-10-05 10:20 0 - 4 2020-10-05 10:30 -86 - 5 2020-10-05 10:40 51 ******************************** 6 2020-10-05 10:50 0 - 7 2020-10-05 11:00 100 ***************************************+ 8 2020-10-05 11:10 100 ***************************************+ 9 2020-10-05 11:20 0 - 10 2020-10-05 11:30 0 - 11 2020-10-05 11:40 ? - ... ..(309 skipped). .. - 321 2020-10-07 15:20 ? - 322 2020-10-07 15:30 0 - SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 2835 --- Lifetime Power-On Resets 0x01 0x010 4 8134 --- Power-on Hours 0x01 0x018 6 22874516556 --- Logical Sectors Written 0x01 0x028 6 31620508582 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 12522 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 12522 --- Number of Hardware Resets 0x06 0x010 4 11056 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 255 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD (30-60 GB) Device Model: TOSHIBA MK4025GAS Serial Number: -- Firmware Version: KA101A User Capacity: 40,007,761,920 bytes [40.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 (minor revision not indicated) Local Time is: Wed Oct 7 15:31:15 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 189) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 956 4 Start_Stop_Count -O--CK 100 100 000 - 13160 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 15 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 084 084 000 - 6615 10 Spin_Retry_Count PO--CK 253 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 7004 192 Power-Off_Retract_Count -O--CK 100 100 000 - 327 193 Load_Cycle_Count -O--CK 082 082 000 - 185099 194 Temperature_Celsius -O---K 100 100 000 - 36 (Min/Max 6/53) 196 Reallocated_Event_Count -O--CK 100 100 000 - 15 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 220 Disk_Shift -O---- 100 100 000 - 92 222 Loaded_Hours -O--CK 089 089 000 - 4629 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 215 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error medium or hardware error (serious) General Purpose Log Directory not supported SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 143 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 143 occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 da 8a 9e e2 Error: UNC 5 sectors at LBA = 0x029e8ada = 43944666 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 5f 8a 9e e2 00 00:41:31.832 READ DMA c8 00 10 b7 77 b9 e0 00 00:41:30.699 READ DMA c8 00 08 af 77 b9 e0 00 00:41:30.590 READ DMA c8 00 10 17 04 b9 e0 00 00:41:30.556 READ DMA c8 00 18 97 77 b9 e0 00 00:41:30.532 READ DMA Error 142 occurred at disk power-on lifetime: 2087 hours (86 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 1f 1e 9c e2 Error: UNC at LBA = 0x029c1e1f = 43785759 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 01 1f 1e 9c e2 00 01:26:31.334 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 01:26:31.319 READ DMA 40 00 02 21 1e 9c e2 00 01:26:31.293 READ VERIFY SECTOR(S) 40 00 02 1f 1e 9c e2 00 01:26:23.005 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 01:26:22.990 READ DMA Error 141 occurred at disk power-on lifetime: 2087 hours (86 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 1f 1e 9c e2 Error: UNC at LBA = 0x029c1e1f = 43785759 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 02 1f 1e 9c e2 00 01:26:23.005 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 01:26:22.990 READ DMA 40 00 04 23 1e 9c e2 00 01:26:22.963 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 01:26:22.950 READ DMA 40 00 04 1f 1e 9c e2 00 01:26:14.648 READ VERIFY SECTOR(S) Error 140 occurred at disk power-on lifetime: 2087 hours (86 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 1f 1e 9c e2 Error: UNC at LBA = 0x029c1e1f = 43785759 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 04 1f 1e 9c e2 00 01:26:14.648 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 01:26:14.633 READ DMA 40 00 08 27 1e 9c e2 00 01:26:14.607 READ VERIFY SECTOR(S) 40 00 08 1f 1e 9c e2 00 01:26:06.320 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 01:26:06.291 READ DMA Error 139 occurred at disk power-on lifetime: 2087 hours (86 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 1f 1e 9c e2 Error: UNC at LBA = 0x029c1e1f = 43785759 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 08 1f 1e 9c e2 00 01:26:06.320 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 01:26:06.291 READ DMA 40 00 10 2f 1e 9c e2 00 01:26:06.264 READ VERIFY SECTOR(S) 40 00 10 1f 1e 9c e2 00 01:25:57.977 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 01:25:57.964 READ DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 2868 - # 2 Short offline Completed without error 00% 2867 - # 3 Short offline Completed without error 00% 3 - # 4 Short offline Completed without error 00% 2 - # 5 Short offline Completed without error 00% 1 - # 6 Short offline Completed without error 00% 1 - # 7 Short offline Completed without error 00% 0 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported