/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-272-tkg-pds] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WDS500G1X0E-00AFY0 Serial Number: -- Firmware Version: 613200WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 8224 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Sun Dec 18 15:01:33 2022 MSK Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 88 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W 9.00W - 0 0 0 0 0 0 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 47 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 10,559,780 [5.40 TB] Data Units Written: 9,204,328 [4.71 TB] Host Read Commands: 105,678,367 Host Write Commands: 135,996,666 Controller Busy Time: 166 Power Cycles: 424 Power On Hours: 1,584 Unsafe Shutdowns: 171 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/nvme1n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-272-tkg-pds] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 980 PRO 250GB Serial Number: -- Firmware Version: 5B2QGXA7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 250,059,350,016 [250 GB] Unallocated NVM Capacity: 0 Controller ID: 6 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 250,059,350,016 [250 GB] Namespace 1 Utilization: 92,974,395,392 [92.9 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Sun Dec 18 15:01:33 2022 MSK Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.49W - - 0 0 0 0 0 0 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 36 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 1% Data Units Read: 4,795,500 [2.45 TB] Data Units Written: 5,610,540 [2.87 TB] Host Read Commands: 63,032,120 Host Write Commands: 80,142,323 Controller Busy Time: 357 Power Cycles: 706 Power On Hours: 933 Unsafe Shutdowns: 304 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 36 Celsius Temperature Sensor 2: 47 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-272-tkg-pds] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-75WN4A1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 13057113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Dec 18 15:01:33 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11220) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 116) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 174 167 021 - 2300 4 Start_Stop_Count -O--CK 100 100 000 - 732 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 079 079 000 - 15662 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 696 192 Power-Off_Retract_Count -O--CK 200 200 000 - 152 193 Load_Cycle_Count -O--CK 133 133 000 - 202634 194 Temperature_Celsius -O---K 116 095 000 - 27 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 240 Head_Flying_Hours -O--CK 080 080 000 - 14690 241 Total_LBAs_Written -O--CK 200 200 000 - 30052510124 242 Total_LBAs_Read -O--CK 200 200 000 - 27917769022 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 25/30 Celsius Lifetime Min/Max Temperature: 14/48 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (137) Index Estimated Time Temperature Celsius 138 2022-12-18 07:04 31 ************ ... ..( 11 skipped). .. ************ 150 2022-12-18 07:16 31 ************ 151 2022-12-18 07:17 32 ************* ... ..( 37 skipped). .. ************* 189 2022-12-18 07:55 32 ************* 190 2022-12-18 07:56 31 ************ ... ..( 31 skipped). .. ************ 222 2022-12-18 08:28 31 ************ 223 2022-12-18 08:29 32 ************* ... ..( 18 skipped). .. ************* 242 2022-12-18 08:48 32 ************* 243 2022-12-18 08:49 33 ************** ... ..( 15 skipped). .. ************** 259 2022-12-18 09:05 33 ************** 260 2022-12-18 09:06 32 ************* 261 2022-12-18 09:07 32 ************* 262 2022-12-18 09:08 32 ************* 263 2022-12-18 09:09 31 ************ ... ..( 2 skipped). .. ************ 266 2022-12-18 09:12 31 ************ 267 2022-12-18 09:13 30 *********** ... ..( 6 skipped). .. *********** 274 2022-12-18 09:20 30 *********** 275 2022-12-18 09:21 29 ********** ... ..( 9 skipped). .. ********** 285 2022-12-18 09:31 29 ********** 286 2022-12-18 09:32 30 *********** 287 2022-12-18 09:33 29 ********** 288 2022-12-18 09:34 30 *********** 289 2022-12-18 09:35 30 *********** 290 2022-12-18 09:36 30 *********** 291 2022-12-18 09:37 31 ************ ... ..( 5 skipped). .. ************ 297 2022-12-18 09:43 31 ************ 298 2022-12-18 09:44 32 ************* ... ..( 2 skipped). .. ************* 301 2022-12-18 09:47 32 ************* 302 2022-12-18 09:48 ? - 303 2022-12-18 09:49 21 ** 304 2022-12-18 09:50 21 ** 305 2022-12-18 09:51 22 *** 306 2022-12-18 09:52 22 *** 307 2022-12-18 09:53 23 **** 308 2022-12-18 09:54 23 **** 309 2022-12-18 09:55 23 **** 310 2022-12-18 09:56 24 ***** 311 2022-12-18 09:57 24 ***** 312 2022-12-18 09:58 ? - 313 2022-12-18 09:59 24 ***** 314 2022-12-18 10:00 24 ***** 315 2022-12-18 10:01 ? - 316 2022-12-18 10:02 24 ***** 317 2022-12-18 10:03 24 ***** 318 2022-12-18 10:04 25 ****** 319 2022-12-18 10:05 ? - 320 2022-12-18 10:06 26 ******* 321 2022-12-18 10:07 25 ****** 322 2022-12-18 10:08 26 ******* 323 2022-12-18 10:09 27 ******** ... ..( 6 skipped). .. ******** 330 2022-12-18 10:16 27 ******** 331 2022-12-18 10:17 28 ********* ... ..( 6 skipped). .. ********* 338 2022-12-18 10:24 28 ********* 339 2022-12-18 10:25 29 ********** ... ..( 12 skipped). .. ********** 352 2022-12-18 10:38 29 ********** 353 2022-12-18 10:39 30 *********** ... ..( 27 skipped). .. *********** 381 2022-12-18 11:07 30 *********** 382 2022-12-18 11:08 29 ********** ... ..( 3 skipped). .. ********** 386 2022-12-18 11:12 29 ********** 387 2022-12-18 11:13 28 ********* ... ..( 7 skipped). .. ********* 395 2022-12-18 11:21 28 ********* 396 2022-12-18 11:22 27 ******** ... ..( 5 skipped). .. ******** 402 2022-12-18 11:28 27 ******** 403 2022-12-18 11:29 26 ******* ... ..( 4 skipped). .. ******* 408 2022-12-18 11:34 26 ******* 409 2022-12-18 11:35 27 ******** ... ..( 17 skipped). .. ******** 427 2022-12-18 11:53 27 ******** 428 2022-12-18 11:54 26 ******* 429 2022-12-18 11:55 26 ******* 430 2022-12-18 11:56 27 ******** 431 2022-12-18 11:57 26 ******* ... ..( 3 skipped). .. ******* 435 2022-12-18 12:01 26 ******* 436 2022-12-18 12:02 27 ******** ... ..( 4 skipped). .. ******** 441 2022-12-18 12:07 27 ******** 442 2022-12-18 12:08 28 ********* 443 2022-12-18 12:09 28 ********* 444 2022-12-18 12:10 29 ********** ... ..( 8 skipped). .. ********** 453 2022-12-18 12:19 29 ********** 454 2022-12-18 12:20 30 *********** ... ..( 35 skipped). .. *********** 12 2022-12-18 12:56 30 *********** 13 2022-12-18 12:57 31 ************ 14 2022-12-18 12:58 30 *********** 15 2022-12-18 12:59 30 *********** 16 2022-12-18 13:00 31 ************ ... ..( 79 skipped). .. ************ 96 2022-12-18 14:20 31 ************ 97 2022-12-18 14:21 30 *********** ... ..( 7 skipped). .. *********** 105 2022-12-18 14:29 30 *********** 106 2022-12-18 14:30 31 ************ ... ..( 16 skipped). .. ************ 123 2022-12-18 14:47 31 ************ 124 2022-12-18 14:48 30 *********** ... ..( 6 skipped). .. *********** 131 2022-12-18 14:55 30 *********** 132 2022-12-18 14:56 31 ************ ... ..( 4 skipped). .. ************ 137 2022-12-18 15:01 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 5403 Vendor specific /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-272-tkg-pds] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-08WN4A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.01A02 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Dec 18 15:01:33 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11280) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 117) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 176 169 021 - 2191 4 Start_Stop_Count -O--CK 097 097 000 - 3495 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 083 083 000 - 12722 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2832 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1000 193 Load_Cycle_Count -O--CK 196 196 000 - 12302 194 Temperature_Celsius -O---K 118 100 000 - 25 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 33 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 33 [8] occurred at disk power-on lifetime: 11270 hours (469 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 40 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 38 00 00 00 5d 75 78 40 00 00:06:46.336 WRITE FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:06:46.211 SET FEATURES [Enable write cache] 61 00 08 00 30 00 00 00 5d 75 78 40 00 00:05:56.229 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:05:26.847 FLUSH CACHE EXT 60 00 08 00 20 00 00 00 5f 75 70 40 00 00:05:26.843 READ FPDMA QUEUED Error 32 [7] occurred at disk power-on lifetime: 11270 hours (469 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:06:46.211 SET FEATURES [Enable write cache] 61 00 08 00 30 00 00 00 5d 75 78 40 00 00:05:56.229 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:05:26.847 FLUSH CACHE EXT 60 00 08 00 20 00 00 00 5f 75 70 40 00 00:05:26.843 READ FPDMA QUEUED 61 00 08 00 18 00 00 00 5d 75 b8 40 00 00:05:26.843 WRITE FPDMA QUEUED Error 31 [6] occurred at disk power-on lifetime: 11270 hours (469 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 5d 75 b8 40 00 Device Fault; Error: ABRT at LBA = 0x005d75b8 = 6124984 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 30 00 00 00 5d 75 78 40 00 00:05:56.229 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:05:26.847 FLUSH CACHE EXT 60 00 08 00 20 00 00 00 5f 75 70 40 00 00:05:26.843 READ FPDMA QUEUED 61 00 08 00 18 00 00 00 5d 75 b8 40 00 00:05:26.843 WRITE FPDMA QUEUED 60 00 08 00 10 00 00 00 5d 75 c0 40 00 00:05:26.842 READ FPDMA QUEUED Error 30 [5] occurred at disk power-on lifetime: 11270 hours (469 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 5d 75 b8 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:05:26.847 FLUSH CACHE EXT 60 00 08 00 20 00 00 00 5f 75 70 40 00 00:05:26.843 READ FPDMA QUEUED 61 00 08 00 18 00 00 00 5d 75 b8 40 00 00:05:26.843 WRITE FPDMA QUEUED 60 00 08 00 10 00 00 00 5d 75 c0 40 00 00:05:26.842 READ FPDMA QUEUED 60 00 08 00 08 00 00 00 5d 75 b8 40 00 00:05:26.842 READ FPDMA QUEUED Error 29 [4] occurred at disk power-on lifetime: 11269 hours (469 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 03 00 00 00 00 00 00 40 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 98 00 00 00 5d 75 78 40 00 00:03:10.080 WRITE FPDMA QUEUED ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:03:09.238 SET FEATURES [Disable SATA feature] ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:03:09.237 SET FEATURES [Enable write cache] 61 00 08 00 90 00 00 00 5d 75 78 40 00 00:02:40.107 WRITE FPDMA QUEUED ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:02:39.264 SET FEATURES [Disable SATA feature] Error 28 [3] occurred at disk power-on lifetime: 11269 hours (469 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 03 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:03:09.238 SET FEATURES [Disable SATA feature] ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:03:09.237 SET FEATURES [Enable write cache] 61 00 08 00 90 00 00 00 5d 75 78 40 00 00:02:40.107 WRITE FPDMA QUEUED ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:02:39.264 SET FEATURES [Disable SATA feature] ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:02:39.264 SET FEATURES [Enable write cache] Error 27 [2] occurred at disk power-on lifetime: 11269 hours (469 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:03:09.237 SET FEATURES [Enable write cache] 61 00 08 00 90 00 00 00 5d 75 78 40 00 00:02:40.107 WRITE FPDMA QUEUED ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:02:39.264 SET FEATURES [Disable SATA feature] ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:02:39.264 SET FEATURES [Enable write cache] 61 00 08 00 88 00 00 00 5d 75 78 40 00 00:02:10.634 WRITE FPDMA QUEUED Error 26 [1] occurred at disk power-on lifetime: 11269 hours (469 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 03 00 00 00 00 00 00 40 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 90 00 00 00 5d 75 78 40 00 00:02:40.107 WRITE FPDMA QUEUED ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:02:39.264 SET FEATURES [Disable SATA feature] ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:02:39.264 SET FEATURES [Enable write cache] 61 00 08 00 88 00 00 00 5d 75 78 40 00 00:02:10.634 WRITE FPDMA QUEUED ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:02:10.146 SET FEATURES [Disable SATA feature] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 25/29 Celsius Lifetime Min/Max Temperature: 14/43 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (349) Index Estimated Time Temperature Celsius 350 2022-12-18 07:04 28 ********* ... ..( 6 skipped). .. ********* 357 2022-12-18 07:11 28 ********* 358 2022-12-18 07:12 29 ********** ... ..( 35 skipped). .. ********** 394 2022-12-18 07:48 29 ********** 395 2022-12-18 07:49 28 ********* ... ..( 6 skipped). .. ********* 402 2022-12-18 07:56 28 ********* 403 2022-12-18 07:57 27 ******** ... ..( 6 skipped). .. ******** 410 2022-12-18 08:04 27 ******** 411 2022-12-18 08:05 26 ******* ... ..( 6 skipped). .. ******* 418 2022-12-18 08:12 26 ******* 419 2022-12-18 08:13 25 ****** 420 2022-12-18 08:14 25 ****** 421 2022-12-18 08:15 25 ****** 422 2022-12-18 08:16 26 ******* ... ..( 4 skipped). .. ******* 427 2022-12-18 08:21 26 ******* 428 2022-12-18 08:22 27 ******** ... ..( 7 skipped). .. ******** 436 2022-12-18 08:30 27 ******** 437 2022-12-18 08:31 26 ******* ... ..( 4 skipped). .. ******* 442 2022-12-18 08:36 26 ******* 443 2022-12-18 08:37 25 ****** ... ..( 4 skipped). .. ****** 448 2022-12-18 08:42 25 ****** 449 2022-12-18 08:43 26 ******* ... ..( 2 skipped). .. ******* 452 2022-12-18 08:46 26 ******* 453 2022-12-18 08:47 27 ******** 454 2022-12-18 08:48 28 ********* ... ..( 2 skipped). .. ********* 457 2022-12-18 08:51 28 ********* 458 2022-12-18 08:52 27 ******** ... ..( 2 skipped). .. ******** 461 2022-12-18 08:55 27 ******** 462 2022-12-18 08:56 28 ********* 463 2022-12-18 08:57 28 ********* 464 2022-12-18 08:58 29 ********** ... ..( 19 skipped). .. ********** 6 2022-12-18 09:18 29 ********** 7 2022-12-18 09:19 30 *********** ... ..( 18 skipped). .. *********** 26 2022-12-18 09:38 30 *********** 27 2022-12-18 09:39 29 ********** ... ..( 2 skipped). .. ********** 30 2022-12-18 09:42 29 ********** 31 2022-12-18 09:43 30 *********** ... ..( 3 skipped). .. *********** 35 2022-12-18 09:47 30 *********** 36 2022-12-18 09:48 31 ************ ... ..( 17 skipped). .. ************ 54 2022-12-18 10:06 31 ************ 55 2022-12-18 10:07 30 *********** ... ..( 54 skipped). .. *********** 110 2022-12-18 11:02 30 *********** 111 2022-12-18 11:03 29 ********** ... ..( 6 skipped). .. ********** 118 2022-12-18 11:10 29 ********** 119 2022-12-18 11:11 30 *********** ... ..( 3 skipped). .. *********** 123 2022-12-18 11:15 30 *********** 124 2022-12-18 11:16 31 ************ ... ..( 8 skipped). .. ************ 133 2022-12-18 11:25 31 ************ 134 2022-12-18 11:26 30 *********** ... ..( 5 skipped). .. *********** 140 2022-12-18 11:32 30 *********** 141 2022-12-18 11:33 29 ********** ... ..( 3 skipped). .. ********** 145 2022-12-18 11:37 29 ********** 146 2022-12-18 11:38 30 *********** 147 2022-12-18 11:39 31 ************ ... ..( 54 skipped). .. ************ 202 2022-12-18 12:34 31 ************ 203 2022-12-18 12:35 30 *********** ... ..( 22 skipped). .. *********** 226 2022-12-18 12:58 30 *********** 227 2022-12-18 12:59 31 ************ ... ..( 23 skipped). .. ************ 251 2022-12-18 13:23 31 ************ 252 2022-12-18 13:24 32 ************* 253 2022-12-18 13:25 31 ************ ... ..( 3 skipped). .. ************ 257 2022-12-18 13:29 31 ************ 258 2022-12-18 13:30 32 ************* ... ..( 13 skipped). .. ************* 272 2022-12-18 13:44 32 ************* 273 2022-12-18 13:45 31 ************ ... ..( 2 skipped). .. ************ 276 2022-12-18 13:48 31 ************ 277 2022-12-18 13:49 30 *********** ... ..( 5 skipped). .. *********** 283 2022-12-18 13:55 30 *********** 284 2022-12-18 13:56 29 ********** ... ..( 17 skipped). .. ********** 302 2022-12-18 14:14 29 ********** 303 2022-12-18 14:15 30 *********** 304 2022-12-18 14:16 30 *********** 305 2022-12-18 14:17 30 *********** 306 2022-12-18 14:18 31 ************ 307 2022-12-18 14:19 31 ************ 308 2022-12-18 14:20 31 ************ 309 2022-12-18 14:21 32 ************* ... ..( 3 skipped). .. ************* 313 2022-12-18 14:25 32 ************* 314 2022-12-18 14:26 ? - 315 2022-12-18 14:27 21 ** ... ..( 2 skipped). .. ** 318 2022-12-18 14:30 21 ** 319 2022-12-18 14:31 22 *** 320 2022-12-18 14:32 22 *** 321 2022-12-18 14:33 23 **** 322 2022-12-18 14:34 24 ***** 323 2022-12-18 14:35 24 ***** 324 2022-12-18 14:36 ? - 325 2022-12-18 14:37 24 ***** 326 2022-12-18 14:38 24 ***** 327 2022-12-18 14:39 ? - 328 2022-12-18 14:40 24 ***** 329 2022-12-18 14:41 24 ***** 330 2022-12-18 14:42 24 ***** 331 2022-12-18 14:43 ? - 332 2022-12-18 14:44 26 ******* ... ..( 5 skipped). .. ******* 338 2022-12-18 14:50 26 ******* 339 2022-12-18 14:51 27 ******** 340 2022-12-18 14:52 27 ******** 341 2022-12-18 14:53 28 ********* ... ..( 7 skipped). .. ********* 349 2022-12-18 15:01 28 ********* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 5403 Vendor specific