Probe #7b52c47055 of ASUSTek G10DK Desktop Computer (ROG STRIX G10DK_G10DK)

Log: smartctl

/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.13.5-desktop-1omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 990 EVO 1TB Serial Number: -- Firmware Version: 0B2QKXJ7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 2.0 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Utilization: 61,037,674,496 [61.0 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Thu Mar 6 01:02:35 2025 EST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x00df): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Verify Log Page Attributes (0x2f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Log0_FISE_MI Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.47W - - 0 0 0 0 0 0 1 + 7.47W - - 1 1 1 1 500 500 2 + 7.47W - - 2 2 2 2 1100 3600 3 - 0.0800W - - 3 3 3 3 3700 2400 4 - 0.0070W - - 4 4 4 4 3700 45000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 35 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 79,827 [40.8 GB] Data Units Written: 527,127 [269 GB] Host Read Commands: 1,176,303 Host Write Commands: 9,837,777 Controller Busy Time: 40 Power Cycles: 5 Power On Hours: 87 Unsafe Shutdowns: 3 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 43 Celsius Temperature Sensor 2: 35 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.13.5-desktop-1omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TEAM T253512GB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: HP3414B5 User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Mar 6 01:02:35 2025 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 8) minutes. Extended self-test routine recommended polling time: ( 16) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 670 12 Power_Cycle_Count -O--CK 100 100 050 - 17 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 366 164 Unknown_Attribute -O--CK 100 100 050 - 4 165 Unknown_Attribute -O--CK 100 100 050 - 10 166 Unknown_Attribute -O--CK 100 100 050 - 2 167 Unknown_Attribute -O--CK 100 100 050 - 3 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 33554432 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 1507 177 Wear_Leveling_Count -O--CK 100 100 050 - 50481353 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 7 194 Temperature_Celsius -O--CK 100 100 050 - 28 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written -O--CK 100 100 050 - 23623 242 Total_LBAs_Read -O--CK 100 100 050 - 1617 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 17 --- Lifetime Power-On Resets 0x01 0x010 4 670 --- Power-on Hours 0x01 0x018 6 1548156928 --- Logical Sectors Written 0x01 0x020 6 9146445 --- Number of Write Commands 0x01 0x028 6 105971712 --- Logical Sectors Read 0x01 0x030 6 2677774 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 17 --- Lifetime Power-On Resets 0x01 0x010 4 670 --- Power-on Hours 0x01 0x018 6 1548156928 --- Logical Sectors Written 0x01 0x020 6 9146445 --- Number of Write Commands 0x01 0x028 6 105971712 --- Logical Sectors Read 0x01 0x030 6 2677774 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 17 --- Lifetime Power-On Resets 0x01 0x010 4 670 --- Power-on Hours 0x01 0x018 6 1548156928 --- Logical Sectors Written 0x01 0x020 6 9146445 --- Number of Write Commands 0x01 0x028 6 105971712 --- Logical Sectors Read 0x01 0x030 6 2677774 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 17 --- Lifetime Power-On Resets 0x01 0x010 4 670 --- Power-on Hours 0x01 0x018 6 1548156928 --- Logical Sectors Written 0x01 0x020 6 9146445 --- Number of Write Commands 0x01 0x028 6 105971712 --- Logical Sectors Read 0x01 0x030 6 2677774 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 17 --- Lifetime Power-On Resets 0x01 0x010 4 670 --- Power-on Hours 0x01 0x018 6 1548156928 --- Logical Sectors Written 0x01 0x020 6 9146445 --- Number of Write Commands 0x01 0x028 6 105971712 --- Logical Sectors Read 0x01 0x030 6 2677774 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 17 --- Lifetime Power-On Resets 0x01 0x010 4 670 --- Power-on Hours 0x01 0x018 6 1548156928 --- Logical Sectors Written 0x01 0x020 6 9146445 --- Number of Write Commands 0x01 0x028 6 105971712 --- Logical Sectors Read 0x01 0x030 6 2677774 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 17 --- Lifetime Power-On Resets 0x01 0x010 4 670 --- Power-on Hours 0x01 0x018 6 1548156928 --- Logical Sectors Written 0x01 0x020 6 9146445 --- Number of Write Commands 0x01 0x028 6 105971712 --- Logical Sectors Read 0x01 0x030 6 2677774 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 17 --- Lifetime Power-On Resets 0x01 0x010 4 670 --- Power-on Hours 0x01 0x018 6 1548156928 --- Logical Sectors Written 0x01 0x020 6 9146445 --- Number of Write Commands 0x01 0x028 6 105971712 --- Logical Sectors Read 0x01 0x030 6 2677774 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 106 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 882 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS


Hardware for Linux and BSD

GitHub