/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-122.124.1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda SpinPoint F3 Device Model: ST500DM005 HD502HJ Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 1AJ10001 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Apr 14 17:33:13 2021 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 4620) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 77) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 4388 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 083 047 025 - 5368 4 Start_Stop_Count -O--CK 093 093 000 - 7755 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 29077 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 1 12 Power_Cycle_Count -O--CK 094 094 000 - 6245 191 G-Sense_Error_Rate -O---K 100 100 000 - 29 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 062 054 000 - 38 (Min/Max 13/46) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 100 096 000 - 16 198 Offline_Uncorrectable ----CK 100 097 000 - 1 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 3 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 9565 223 Load_Retry_Count -O--CK 100 100 000 - 1 225 Load_Cycle_Count -O--CK 100 100 000 - 7965 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 894 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 894 [5] occurred at disk power-on lifetime: 29069 hours (1211 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 3b 00 00 04 06 02 4d 40 00 Error: UNC 315 sectors at LBA = 0x0406024d = 67502669 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 40 00 00 04 06 00 48 40 00 00:00:24.494 READ DMA EXT 25 00 00 01 a0 00 00 04 05 fe a8 40 00 00:00:24.494 READ DMA EXT 25 00 00 00 d0 00 00 04 05 fd d8 40 00 00:00:24.494 READ DMA EXT 25 00 00 00 68 00 00 04 05 fd 70 40 00 00:00:24.494 READ DMA EXT 25 00 00 00 68 00 00 04 05 fd 08 40 00 00:00:24.494 READ DMA EXT Error 893 [4] occurred at disk power-on lifetime: 27945 hours (1164 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 31 00 00 04 01 97 07 40 00 Error: UNC 49 sectors at LBA = 0x04019707 = 67213063 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 48 00 00 04 01 95 f0 40 00 00:00:06.778 READ DMA EXT 25 00 00 00 08 00 00 03 cd 21 98 40 00 00:00:06.778 READ DMA EXT 25 00 00 00 08 00 00 03 cd 23 10 40 00 00:00:06.778 READ DMA EXT 25 00 00 01 28 00 00 04 01 94 c8 40 00 00:00:06.778 READ DMA EXT 25 00 00 00 08 00 00 03 cd 0b 60 40 00 00:00:06.778 READ DMA EXT Error 892 [3] occurred at disk power-on lifetime: 27737 hours (1155 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 30 00 00 04 00 a6 30 40 00 Error: UNC 48 sectors at LBA = 0x0400a630 = 67151408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 04 00 a5 60 40 00 00:00:01.410 READ DMA EXT 25 00 00 00 10 00 00 00 59 ee 78 40 00 00:00:01.410 READ DMA EXT 25 00 00 00 58 00 00 01 71 ef 30 40 00 00:00:01.410 READ DMA EXT 25 00 00 00 40 00 00 04 00 a9 00 40 00 00:00:01.410 READ DMA EXT 25 00 00 00 40 00 00 09 ca 45 18 40 00 00:00:01.410 READ DMA EXT Error 891 [2] occurred at disk power-on lifetime: 27727 hours (1155 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 30 00 00 04 00 a6 30 40 00 Error: UNC 48 sectors at LBA = 0x0400a630 = 67151408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 04 00 a5 60 40 00 00:00:01.508 READ DMA EXT 25 00 00 00 c8 00 00 04 00 a9 d8 40 00 00:00:01.508 READ DMA EXT 25 00 00 01 60 00 00 04 00 aa a0 40 00 00:00:01.508 READ DMA EXT 25 00 00 00 08 00 00 04 00 ac 00 40 00 00:00:01.508 READ DMA EXT 25 00 00 00 10 00 00 00 51 4c 08 40 00 00:00:01.508 READ DMA EXT Error 890 [1] occurred at disk power-on lifetime: 27186 hours (1132 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 05 65 00 00 02 62 67 83 40 00 Error: UNC 1381 sectors at LBA = 0x02626783 = 40003459 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.872 READ DMA EXT 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.871 READ DMA EXT 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.870 READ DMA EXT 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.869 READ DMA EXT 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.868 READ DMA EXT Error 889 [0] occurred at disk power-on lifetime: 27186 hours (1132 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 05 65 00 00 02 62 67 83 40 00 Error: UNC 1381 sectors at LBA = 0x02626783 = 40003459 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.871 READ DMA EXT 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.870 READ DMA EXT 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.869 READ DMA EXT 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.868 READ DMA EXT 25 00 00 00 10 00 00 09 d2 cf 80 40 00 00:00:15.868 READ DMA EXT Error 888 [7] occurred at disk power-on lifetime: 27186 hours (1132 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 05 65 00 00 02 62 67 83 40 00 Error: UNC 1381 sectors at LBA = 0x02626783 = 40003459 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.870 READ DMA EXT 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.869 READ DMA EXT 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.868 READ DMA EXT 25 00 00 00 10 00 00 09 d2 cf 80 40 00 00:00:15.868 READ DMA EXT 25 00 00 00 10 00 00 09 d2 cf 08 40 00 00:00:15.868 READ DMA EXT Error 887 [6] occurred at disk power-on lifetime: 27186 hours (1132 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 05 65 00 00 02 62 67 83 40 00 Error: UNC 1381 sectors at LBA = 0x02626783 = 40003459 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.869 READ DMA EXT 25 00 00 06 f0 00 00 02 62 65 f8 40 00 00:00:15.868 READ DMA EXT 25 00 00 00 10 00 00 09 d2 cf 80 40 00 00:00:15.868 READ DMA EXT 25 00 00 00 10 00 00 09 d2 cf 08 40 00 00:00:15.868 READ DMA EXT 25 00 00 00 10 00 00 09 d2 ce e0 40 00 00:00:15.868 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 28583 439191677 # 2 Extended offline Completed: read failure 90% 27967 67698378 SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed_read_failure [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 25/38 Celsius Lifetime Min/Max Temperature: 15/69 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (80) Index Estimated Time Temperature Celsius 81 2021-04-14 06:55 37 ****************** ... ..( 49 skipped). .. ****************** 3 2021-04-14 11:05 37 ****************** 4 2021-04-14 11:10 25 ****** 5 2021-04-14 11:15 28 ********* 6 2021-04-14 11:20 30 *********** 7 2021-04-14 11:25 31 ************ 8 2021-04-14 11:30 32 ************* 9 2021-04-14 11:35 33 ************** 10 2021-04-14 11:40 34 *************** 11 2021-04-14 11:45 35 **************** 12 2021-04-14 11:50 35 **************** 13 2021-04-14 11:55 35 **************** 14 2021-04-14 12:00 36 ***************** ... ..( 2 skipped). .. ***************** 17 2021-04-14 12:15 36 ***************** 18 2021-04-14 12:20 37 ****************** ... ..( 7 skipped). .. ****************** 26 2021-04-14 13:00 37 ****************** 27 2021-04-14 13:05 38 ******************* ... ..( 52 skipped). .. ******************* 80 2021-04-14 17:30 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-122.124.1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD3200AAJS-22B4A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.03A01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Wed Apr 14 17:33:13 2021 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5760) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 70) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 155 153 021 - 3250 4 Start_Stop_Count -O--CK 096 096 000 - 4117 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 058 058 000 - 30883 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3811 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1134 193 Load_Cycle_Count -O--CK 199 199 000 - 4117 194 Temperature_Celsius -O---K 099 083 000 - 44 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 641 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 641 [16] occurred at disk power-on lifetime: 17470 hours (727 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 01 00 00 01 7c 00 58 20 e0 00 Error: AMNF 256 sectors at LBA = 0x17c005820 = 6375364640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 01 58 7c 20 e0 00 05:04:31.472 READ DMA EXT 25 00 00 01 00 00 00 01 58 7b 20 e0 00 05:04:31.457 READ DMA EXT 35 00 00 01 00 00 00 01 64 06 d0 e0 00 05:04:31.456 WRITE DMA EXT 35 00 00 01 00 00 00 01 64 05 d0 e0 00 05:04:31.454 WRITE DMA EXT 35 00 00 01 00 00 00 01 64 04 d0 e0 00 05:04:31.453 WRITE DMA EXT Error 640 [15] occurred at disk power-on lifetime: 17470 hours (727 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 01 00 00 01 7c 00 58 20 e0 00 Error: AMNF 256 sectors at LBA = 0x17c005820 = 6375364640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 01 58 7c 20 e0 00 05:04:26.234 READ DMA EXT 25 00 00 01 00 00 00 01 58 7b 20 e0 00 05:04:26.234 READ DMA EXT 35 00 00 00 08 00 00 01 9a da 78 e0 00 05:04:26.199 WRITE DMA EXT 35 00 00 00 08 00 00 01 9a d6 40 e0 00 05:04:26.199 WRITE DMA EXT 35 00 00 00 08 00 00 01 9a d6 08 e0 00 05:04:26.199 WRITE DMA EXT Error 639 [14] occurred at disk power-on lifetime: 17470 hours (727 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 01 7c 00 58 c0 e0 00 Error: UNC 32 sectors at LBA = 0x17c0058c0 = 6375364800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 01 58 7c c0 e0 00 05:04:23.292 READ DMA EXT 35 00 00 00 20 00 00 01 65 d5 40 e0 00 05:04:23.292 WRITE DMA EXT 25 00 00 00 20 00 00 01 58 7c a0 e0 00 05:04:23.292 READ DMA EXT 35 00 00 00 20 00 00 01 65 d5 20 e0 00 05:04:23.292 WRITE DMA EXT 25 00 00 00 20 00 00 01 58 7c 80 e0 00 05:04:23.292 READ DMA EXT Error 638 [13] occurred at disk power-on lifetime: 17466 hours (727 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 01 00 00 01 7c 00 58 20 e0 00 Error: AMNF 256 sectors at LBA = 0x17c005820 = 6375364640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 01 58 7c 20 e0 00 01:00:53.189 READ DMA EXT 25 00 00 01 00 00 00 01 58 7b 20 e0 00 01:00:53.188 READ DMA EXT 35 00 00 00 08 00 00 05 15 4a 08 e0 00 01:00:53.140 WRITE DMA EXT 35 00 00 00 08 00 00 05 15 44 e8 e0 00 01:00:53.140 WRITE DMA EXT 35 00 00 00 08 00 00 05 15 41 a8 e0 00 01:00:53.140 WRITE DMA EXT Error 637 [12] occurred at disk power-on lifetime: 17466 hours (727 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 00 20 00 01 7c 00 58 c0 e0 00 Error: AMNF 32 sectors at LBA = 0x17c0058c0 = 6375364800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 01 58 7c c0 e0 00 01:00:50.080 READ DMA EXT 35 00 00 00 20 00 00 01 64 09 60 e0 00 01:00:50.080 WRITE DMA EXT 25 00 00 00 20 00 00 01 58 7c a0 e0 00 01:00:50.080 READ DMA EXT 35 00 00 00 20 00 00 01 64 09 40 e0 00 01:00:50.079 WRITE DMA EXT 25 00 00 00 20 00 00 01 58 7c 80 e0 00 01:00:50.079 READ DMA EXT Error 636 [11] occurred at disk power-on lifetime: 17466 hours (727 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 01 00 00 01 7c 00 58 20 e0 00 Error: AMNF 256 sectors at LBA = 0x17c005820 = 6375364640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 01 58 7c 20 e0 00 01:00:39.271 READ DMA EXT 25 00 00 01 00 00 00 01 58 7b 20 e0 00 01:00:39.261 READ DMA EXT 35 00 00 00 18 00 00 01 5d 4e 80 e0 00 01:00:39.260 WRITE DMA EXT 25 00 00 00 18 00 00 01 5c 85 a0 e0 00 01:00:39.260 READ DMA EXT 35 00 00 00 20 00 00 01 5d 4e 60 e0 00 01:00:39.260 WRITE DMA EXT Error 635 [10] occurred at disk power-on lifetime: 17466 hours (727 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 01 00 00 01 7c 00 58 20 e0 00 Error: AMNF 256 sectors at LBA = 0x17c005820 = 6375364640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 01 58 7c 20 e0 00 00:29:36.931 READ DMA EXT 25 00 00 01 00 00 00 01 58 7b 20 e0 00 00:29:36.912 READ DMA EXT 35 00 00 00 20 00 00 0a f2 5c 20 e0 00 00:29:36.849 WRITE DMA EXT 25 00 00 00 04 00 00 01 39 2e 38 e0 00 00:29:36.792 READ DMA EXT 35 00 00 01 00 00 00 0a f3 3a 60 e0 00 00:29:36.790 WRITE DMA EXT Error 634 [9] occurred at disk power-on lifetime: 17450 hours (727 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 01 00 00 01 7c 00 58 20 e0 00 Error: AMNF 256 sectors at LBA = 0x17c005820 = 6375364640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 01 58 7c 20 e0 00 00:25:35.454 READ DMA EXT 25 00 00 01 00 00 00 01 58 7b 20 e0 00 00:25:35.431 READ DMA EXT 35 00 00 00 18 00 00 04 f4 65 20 e0 00 00:25:35.431 WRITE DMA EXT 25 00 00 00 18 00 00 01 63 8a 80 e0 00 00:25:35.431 READ DMA EXT 35 00 00 00 20 00 00 04 f4 65 00 e0 00 00:25:35.431 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 30427 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 44 Celsius Power Cycle Min/Max Temperature: 26/44 Celsius Lifetime Min/Max Temperature: 27/60 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (84) Index Estimated Time Temperature Celsius 85 2021-04-14 15:26 44 ************************* ... ..(126 skipped). .. ************************* 84 2021-04-14 17:33 44 ************************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x8000 4 23247 Vendor specific /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-122.124.1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: scsi error unsupported field in scsi command A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.