/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.0.6-76060006-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SPCC M.2 PCIe SSD Serial Number: -- Firmware Version: ECFM12.2 PCI Vendor/Subsystem ID: 0x1987 IEEE OUI Identifier: 0x6479a7 Total NVM Capacity: 256,060,514,304 [256 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 ... Local Time is: Sat Dec 10 11:19:51 2022 CET Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0007): Security Format Frmw_DL Optional NVM Commands (0x0054): DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0c): Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 70 Celsius Critical Comp. Temp. Threshold: 90 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.80W - - 0 0 0 0 0 0 1 + 5.74W - - 1 1 1 1 0 0 2 + 5.21W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 20 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 5% Data Units Read: 32,345,490 [16.5 TB] Data Units Written: 26,570,581 [13.6 TB] Host Read Commands: 1,020,926,743 Host Write Commands: 527,950,538 Controller Busy Time: 2,267 Power Cycles: 1,707 Power On Hours: 14,118 Unsafe Shutdowns: 146 Media and Data Integrity Errors: 0 Error Information Log Entries: 3,926 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 63 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 3926 0 0x0008 0x4004 0x028 0 0 - 1 3925 0 0x0019 0x4004 - 0 0 - 2 3924 0 0x000c 0x4004 0x028 0 0 - 3 3923 0 0x0019 0x4004 - 0 0 - 4 3922 0 0x5002 0x4004 0x028 0 0 - 5 3921 0 0x0019 0x4004 - 0 0 - 6 3920 0 0x0000 0x4004 0x028 0 0 - 7 3919 0 0x0019 0x4004 - 0 0 - 8 3918 0 0x0008 0x4004 0x028 0 0 - 9 3917 0 0x0019 0x4004 - 0 0 - 10 3916 0 0x4011 0x4004 0x028 0 0 - 11 3915 0 0x0019 0x4004 - 0 0 - 12 3914 0 0x5013 0x4004 0x028 0 0 - 13 3913 0 0x0019 0x4004 - 0 0 - 14 3912 0 0x0018 0x4004 0x028 0 0 - 15 3911 0 0x0019 0x4004 - 0 0 - ... (47 entries not read) /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.0.6-76060006-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: CT1000P1SSD8 Serial Number: -- Firmware Version: P3CR010 PCI Vendor/Subsystem ID: 0xc0a9 IEEE OUI Identifier: 0x000000 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Local Time is: Sat Dec 10 11:19:51 2022 CET Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0016): Format Frmw_DL Self_Test Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 32 Pages Warning Comp. Temp. Threshold: 70 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W - - 0 0 0 0 5 5 1 + 4.60W - - 1 1 1 1 30 30 2 + 3.80W - - 2 2 2 2 30 30 3 - 0.0500W - - 3 3 3 3 1000 1000 4 - 0.0040W - - 4 4 4 4 6000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 34 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 18,022,530 [9.22 TB] Data Units Written: 10,912,039 [5.58 TB] Host Read Commands: 131,207,874 Host Write Commands: 69,472,446 Controller Busy Time: 2,273 Power Cycles: 1,636 Power On Hours: 14,058 Unsafe Shutdowns: 70 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 17 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 34 Celsius Temperature Sensor 2: 35 Celsius Temperature Sensor 5: 52 Celsius Thermal Temp. 1 Transition Count: 489 Thermal Temp. 2 Transition Count: 85 Thermal Temp. 1 Total Time: 1133570 Thermal Temp. 2 Total Time: 311256 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.0.6-76060006-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD20EFRX-68AX9N0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Dec 10 11:19:51 2022 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (28560) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 288) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 171 169 021 - 4450 4 Start_Stop_Count -O--CK 096 096 000 - 4857 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 055 055 000 - 33514 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4545 192 Power-Off_Retract_Count -O--CK 200 200 000 - 207 193 Load_Cycle_Count -O--CK 199 199 000 - 4649 194 Temperature_Celsius -O---K 122 077 000 - 25 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 13991 hours (582 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 22 9a 08 48 40 00 Error: UNC at LBA = 0x229a0848 = 580520008 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 ce a3 09 78 40 00 00:04:51.706 READ FPDMA QUEUED 60 00 08 00 f8 00 00 c6 cb 1d 80 40 00 00:04:51.706 READ FPDMA QUEUED 60 00 40 00 f0 00 00 22 9a 08 48 40 00 00:04:51.665 READ FPDMA QUEUED 60 00 08 00 e8 00 00 ce a3 09 70 40 00 00:04:51.640 READ FPDMA QUEUED 60 00 08 00 e0 00 00 c6 cb 83 80 40 00 00:04:51.639 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 18/25 Celsius Lifetime Min/Max Temperature: 15/70 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (121) Index Estimated Time Temperature Celsius 122 2022-12-10 03:22 38 ******************* ... ..( 28 skipped). .. ******************* 151 2022-12-10 03:51 38 ******************* 152 2022-12-10 03:52 37 ****************** ... ..( 16 skipped). .. ****************** 169 2022-12-10 04:09 37 ****************** 170 2022-12-10 04:10 ? - 171 2022-12-10 04:11 18 - 172 2022-12-10 04:12 18 - 173 2022-12-10 04:13 18 - 174 2022-12-10 04:14 19 - 175 2022-12-10 04:15 19 - 176 2022-12-10 04:16 20 * 177 2022-12-10 04:17 20 * 178 2022-12-10 04:18 21 ** 179 2022-12-10 04:19 21 ** 180 2022-12-10 04:20 22 *** 181 2022-12-10 04:21 22 *** 182 2022-12-10 04:22 23 **** 183 2022-12-10 04:23 23 **** 184 2022-12-10 04:24 24 ***** 185 2022-12-10 04:25 24 ***** 186 2022-12-10 04:26 24 ***** 187 2022-12-10 04:27 25 ****** 188 2022-12-10 04:28 37 ****************** ... ..( 26 skipped). .. ****************** 215 2022-12-10 04:55 37 ****************** 216 2022-12-10 04:56 38 ******************* ... ..( 12 skipped). .. ******************* 229 2022-12-10 05:09 38 ******************* 230 2022-12-10 05:10 ? - 231 2022-12-10 05:11 19 - 232 2022-12-10 05:12 18 - 233 2022-12-10 05:13 19 - 234 2022-12-10 05:14 19 - 235 2022-12-10 05:15 20 * 236 2022-12-10 05:16 21 ** ... ..( 2 skipped). .. ** 239 2022-12-10 05:19 21 ** 240 2022-12-10 05:20 22 *** 241 2022-12-10 05:21 23 **** 242 2022-12-10 05:22 23 **** 243 2022-12-10 05:23 24 ***** 244 2022-12-10 05:24 24 ***** 245 2022-12-10 05:25 24 ***** 246 2022-12-10 05:26 25 ****** 247 2022-12-10 05:27 25 ****** 248 2022-12-10 05:28 26 ******* 249 2022-12-10 05:29 26 ******* 250 2022-12-10 05:30 27 ******** ... ..( 3 skipped). .. ******** 254 2022-12-10 05:34 27 ******** 255 2022-12-10 05:35 28 ********* ... ..( 3 skipped). .. ********* 259 2022-12-10 05:39 28 ********* 260 2022-12-10 05:40 29 ********** ... ..( 2 skipped). .. ********** 263 2022-12-10 05:43 29 ********** 264 2022-12-10 05:44 30 *********** ... ..( 2 skipped). .. *********** 267 2022-12-10 05:47 30 *********** 268 2022-12-10 05:48 31 ************ ... ..( 7 skipped). .. ************ 276 2022-12-10 05:56 31 ************ 277 2022-12-10 05:57 32 ************* ... ..( 5 skipped). .. ************* 283 2022-12-10 06:03 32 ************* 284 2022-12-10 06:04 33 ************** ... ..( 7 skipped). .. ************** 292 2022-12-10 06:12 33 ************** 293 2022-12-10 06:13 34 *************** ... ..( 11 skipped). .. *************** 305 2022-12-10 06:25 34 *************** 306 2022-12-10 06:26 35 **************** ... ..( 19 skipped). .. **************** 326 2022-12-10 06:46 35 **************** 327 2022-12-10 06:47 36 ***************** ... ..( 29 skipped). .. ***************** 357 2022-12-10 07:17 36 ***************** 358 2022-12-10 07:18 37 ****************** ... ..( 24 skipped). .. ****************** 383 2022-12-10 07:43 37 ****************** 384 2022-12-10 07:44 38 ******************* ... ..( 28 skipped). .. ******************* 413 2022-12-10 08:13 38 ******************* 414 2022-12-10 08:14 39 ******************** ... ..( 18 skipped). .. ******************** 433 2022-12-10 08:33 39 ******************** 434 2022-12-10 08:34 40 ********************* ... ..( 54 skipped). .. ********************* 11 2022-12-10 09:29 40 ********************* 12 2022-12-10 09:30 39 ******************** ... ..( 27 skipped). .. ******************** 40 2022-12-10 09:58 39 ******************** 41 2022-12-10 09:59 38 ******************* ... ..( 79 skipped). .. ******************* 121 2022-12-10 11:19 38 ******************* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 242 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1031 Vendor specific