/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.2-desktop-3omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus Thin Device Model: ST320LT007-9ZV142 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0005DEM1 User Capacity: 320,072,933,376 bytes [320 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Jul 14 09:38:30 2025 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2], Master PW ID: 0x1d3b Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 63) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 110 090 006 - 88857585 3 Spin_Up_Time PO---- 098 098 085 - 0 4 Start_Stop_Count -O--CK 089 089 020 - 11419 5 Reallocated_Sector_Ct PO--CK 097 097 036 - 76 7 Seek_Error_Rate POSR-- 079 060 030 - 13137609596 9 Power_On_Hours -O--CK 065 065 000 - 30996 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 091 091 020 - 10098 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 001 001 000 - 976 188 Command_Timeout -O--CK 100 098 000 - 6237 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 069 042 045 Past 31 (0 8 31 26 0) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 651 192 Power-Off_Retract_Count -O--CK 099 099 000 - 3546 193 Load_Cycle_Count -O--CK 001 001 000 - 974816 194 Temperature_Celsius -O---K 031 058 000 - 31 (0 10 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 048 030 000 - 88857585 197 Current_Pending_Sector -O--C- 100 087 000 - 0 198 Offline_Uncorrectable ----C- 100 087 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 6 240 Head_Flying_Hours ------ 100 253 000 - 25408 (232 133 0) 241 Total_LBAs_Written ------ 100 253 000 - 3423026599 242 Total_LBAs_Read ------ 100 253 000 - 949806968 250 Read_Error_Retry_Rate ------ 100 001 000 - 1050 251 Unknown_Attribute ------ 100 001 000 - 11 252 Unknown_Attribute ------ 100 001 000 - 0 254 Free_Fall_Sensor -O--CK 001 001 000 - 179 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbd GPL VS 1 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 870 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 870 [9] occurred at disk power-on lifetime: 30938 hours (1289 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 20 b1 d8 00 00 00 Error: UNC at LBA = 0x20b1d800 = 548526080 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 20 b1 d8 00 40 00 00:00:45.820 READ FPDMA QUEUED 60 00 00 00 08 00 00 20 71 d8 00 40 00 00:00:45.809 READ FPDMA QUEUED 60 00 00 00 20 00 00 20 31 d8 10 40 00 00:00:45.808 READ FPDMA QUEUED 60 00 00 00 08 00 00 20 31 d8 08 40 00 00:00:45.807 READ FPDMA QUEUED 60 00 00 00 08 00 00 20 31 d8 80 40 00 00:00:45.806 READ FPDMA QUEUED Error 869 [8] occurred at disk power-on lifetime: 26541 hours (1105 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 18 4f 4e 68 00 00 Error: UNC at LBA = 0x184f4e68 = 407850600 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 20 00 00 18 4f 4d 90 40 00 02:28:24.080 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4d 70 40 00 02:28:24.076 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4d 50 40 00 02:28:24.076 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4d 30 40 00 02:28:24.075 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4d 10 40 00 02:28:24.075 READ FPDMA QUEUED Error 868 [7] occurred at disk power-on lifetime: 26541 hours (1105 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 18 4f 4e 68 00 00 Error: UNC at LBA = 0x184f4e68 = 407850600 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 20 00 00 18 4f 4e 50 40 00 02:28:18.385 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e 70 40 00 02:28:18.377 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e 90 40 00 02:28:18.369 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e b0 40 00 02:28:18.361 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e d0 40 00 02:28:18.353 READ FPDMA QUEUED Error 867 [6] occurred at disk power-on lifetime: 26509 hours (1104 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 18 4f 4e 68 00 00 Error: UNC at LBA = 0x184f4e68 = 407850600 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 13 7b b6 b8 40 00 00:02:29.626 READ FPDMA QUEUED 60 00 00 00 08 00 00 17 f1 9e 90 40 00 00:02:29.616 READ FPDMA QUEUED 61 00 00 00 08 00 00 19 31 9c 10 40 00 00:02:29.616 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 19 30 a3 38 40 00 00:02:29.600 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 19 30 9f 18 40 00 00:02:29.600 WRITE FPDMA QUEUED Error 866 [5] occurred at disk power-on lifetime: 26509 hours (1104 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 18 4f 4e 68 00 00 Error: WP at LBA = 0x184f4e68 = 407850600 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 10 00 00 19 47 69 48 40 00 00:02:10.477 WRITE FPDMA QUEUED 61 00 00 00 10 00 00 19 47 69 38 40 00 00:02:10.476 WRITE FPDMA QUEUED 60 00 00 00 08 00 00 19 47 78 f8 40 00 00:02:10.465 READ FPDMA QUEUED 60 00 00 00 08 00 00 17 f1 9f a8 40 00 00:02:10.456 READ FPDMA QUEUED 60 00 00 00 08 00 00 19 34 a1 20 40 00 00:02:10.452 READ FPDMA QUEUED Error 865 [4] occurred at disk power-on lifetime: 26509 hours (1104 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 18 4f 4e 68 00 00 Error: UNC at LBA = 0x184f4e68 = 407850600 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 20 00 00 18 4f 4e 50 40 00 00:02:02.305 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e 70 40 00 00:02:02.297 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e 90 40 00 00:02:02.288 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e b0 40 00 00:02:02.280 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e d0 40 00 00:02:02.272 READ FPDMA QUEUED Error 864 [3] occurred at disk power-on lifetime: 26496 hours (1104 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 18 4f 4e 68 00 00 Error: UNC at LBA = 0x184f4e68 = 407850600 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 20 00 00 18 4f 4e 50 40 00 00:02:21.753 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e 30 40 00 00:02:21.752 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4d f0 40 00 00:02:21.752 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4d d0 40 00 00:02:21.751 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4d b0 40 00 00:02:21.747 READ FPDMA QUEUED Error 863 [2] occurred at disk power-on lifetime: 26496 hours (1104 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 18 4f 4e 68 00 00 Error: UNC at LBA = 0x184f4e68 = 407850600 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 20 00 00 18 4f 4e 50 40 00 00:02:16.247 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e 70 40 00 00:02:16.239 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e 90 40 00 00:02:16.231 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e b0 40 00 00:02:16.223 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 4f 4e d0 40 00 00:02:16.215 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 28495 - # 2 Short offline Completed without error 00% 28480 - # 3 Short offline Completed without error 00% 28454 - # 4 Short offline Completed without error 00% 28444 - # 5 Short offline Completed without error 00% 28434 - # 6 Short offline Completed without error 00% 28362 - # 7 Short offline Completed without error 00% 28326 - # 8 Short offline Completed without error 00% 28310 - # 9 Short offline Completed without error 00% 28297 - #10 Short offline Completed without error 00% 28284 - #11 Short offline Completed without error 00% 28270 - #12 Short offline Completed without error 00% 28258 - #13 Short offline Completed without error 00% 28243 - #14 Short offline Completed without error 00% 28230 - #15 Short offline Completed without error 00% 28218 - #16 Short offline Completed without error 00% 28207 - #17 Extended offline Completed: read failure 50% 28197 407850600 #18 Short offline Completed without error 00% 28180 - #19 Short offline Completed without error 00% 28169 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 26/31 Celsius Lifetime Min/Max Temperature: 10/58 Celsius Specified Max Operating Temperature: 36 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 30 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (77) Index Estimated Time Temperature Celsius 78 2025-07-11 18:00 37 ****************** ... ..( 4 skipped). .. ****************** 83 2025-07-11 20:30 37 ****************** 84 2025-07-11 21:00 38 ******************* 85 2025-07-11 21:30 38 ******************* 86 2025-07-11 22:00 38 ******************* 87 2025-07-11 22:30 37 ****************** 88 2025-07-11 23:00 37 ****************** 89 2025-07-11 23:30 38 ******************* ... ..( 9 skipped). .. ******************* 99 2025-07-12 04:30 38 ******************* 100 2025-07-12 05:00 ? - 101 2025-07-12 05:30 25 ****** 102 2025-07-12 06:00 ? - 103 2025-07-12 06:30 25 ****** 104 2025-07-12 07:00 ? - 105 2025-07-12 07:30 25 ****** 106 2025-07-12 08:00 33 ************** 107 2025-07-12 08:30 35 **************** 108 2025-07-12 09:00 37 ****************** 109 2025-07-12 09:30 37 ****************** 110 2025-07-12 10:00 37 ****************** 111 2025-07-12 10:30 38 ******************* ... ..( 22 skipped). .. ******************* 6 2025-07-12 22:00 38 ******************* 7 2025-07-12 22:30 ? - 8 2025-07-12 23:00 25 ****** 9 2025-07-12 23:30 ? - 10 2025-07-13 00:00 25 ****** 11 2025-07-13 00:30 ? - 12 2025-07-13 01:00 25 ****** 13 2025-07-13 01:30 34 *************** 14 2025-07-13 02:00 36 ***************** 15 2025-07-13 02:30 36 ***************** 16 2025-07-13 03:00 37 ****************** 17 2025-07-13 03:30 37 ****************** 18 2025-07-13 04:00 38 ******************* 19 2025-07-13 04:30 37 ****************** 20 2025-07-13 05:00 38 ******************* ... ..( 6 skipped). .. ******************* 27 2025-07-13 08:30 38 ******************* 28 2025-07-13 09:00 39 ******************** ... ..( 5 skipped). .. ******************** 34 2025-07-13 12:00 39 ******************** 35 2025-07-13 12:30 38 ******************* 36 2025-07-13 13:00 39 ******************** 37 2025-07-13 13:30 38 ******************* 38 2025-07-13 14:00 38 ******************* 39 2025-07-13 14:30 ? - 40 2025-07-13 15:00 26 ******* 41 2025-07-13 15:30 ? - 42 2025-07-13 16:00 26 ******* 43 2025-07-13 16:30 ? - 44 2025-07-13 17:00 26 ******* 45 2025-07-13 17:30 34 *************** 46 2025-07-13 18:00 36 ***************** 47 2025-07-13 18:30 36 ***************** 48 2025-07-13 19:00 37 ****************** 49 2025-07-13 19:30 37 ****************** 50 2025-07-13 20:00 37 ****************** 51 2025-07-13 20:30 38 ******************* ... ..( 5 skipped). .. ******************* 57 2025-07-13 23:30 38 ******************* 58 2025-07-14 00:00 37 ****************** 59 2025-07-14 00:30 37 ****************** 60 2025-07-14 01:00 37 ****************** 61 2025-07-14 01:30 38 ******************* ... ..( 4 skipped). .. ******************* 66 2025-07-14 04:00 38 ******************* 67 2025-07-14 04:30 37 ****************** 68 2025-07-14 05:00 37 ****************** 69 2025-07-14 05:30 38 ******************* 70 2025-07-14 06:00 38 ******************* 71 2025-07-14 06:30 37 ****************** 72 2025-07-14 07:00 ? - 73 2025-07-14 07:30 25 ****** 74 2025-07-14 08:00 ? - 75 2025-07-14 08:30 26 ******* 76 2025-07-14 09:00 ? - 77 2025-07-14 09:30 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS