/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.2 Device Model: ST9120821AS Serial Number: -- Firmware Version: 7.24 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Wed Mar 1 22:33:01 2017 WET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 25) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 426) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 68) minutes. SCT capabilities: (0x0001) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 102 100 006 - 4840268 3 Spin_Up_Time -O---- 095 094 000 - 0 4 Start_Stop_Count PO--CK 096 096 020 - 5070 5 Reallocated_Sector_Ct PO--CK 099 099 036 - 41 7 Seek_Error_Rate POSR-- 083 060 030 - 9011995479 9 Power_On_Hours -O--CK 092 092 000 - 7098 10 Spin_Retry_Count PO--C- 100 100 034 - 0 12 Power_Cycle_Count PO--CK 095 095 020 - 5378 187 Reported_Uncorrect -O--CK 001 001 000 - 13013 189 High_Fly_Writes -O-RCK 098 098 000 - 2 190 Airflow_Temperature_Cel -O---K 070 035 045 Past 30 (Min/Max 29/30) 192 Power-Off_Retract_Count -O--CK 100 100 000 - 906 193 Load_Cycle_Count -O--CK 049 049 000 - 102673 194 Temperature_Celsius -O---K 030 065 000 - 30 (0 8 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 085 048 000 - 231345648 197 Current_Pending_Sector -O--C- 001 001 000 - 4294967295 198 Offline_Uncorrectable ----C- 001 001 000 - 4294967295 199 UDMA_CRC_Error_Count -OSRCK 200 190 000 - 3218 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 SL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 SL R/O 1 SATA NCQ Queued Error log 0x11 SL R/O 1 SATA Phy Event Counters log 0x20 SL R/O 1 Streaming performance log [OBS-8] 0x21 SL R/O 1 Write stream error log 0x22 SL R/O 1 Read stream error log 0x23 SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f SL R/W 16 Host vendor specific log 0xa0 SL VS 1 Device vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa2 SL VS 101 Device vendor specific log 0xa8 SL VS 20 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log 0xe0 SL R/W 1 SCT Command/Status 0xe1 SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 9334 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9334 occurred at disk power-on lifetime: 7090 hours (295 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 1c e9 3c 00 e0 Error: ICRC, ABRT 28 sectors at LBA = 0x00003ce9 = 15593 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 7d 88 3c 00 e0 00 00:02:52.044 READ DMA c8 00 08 58 3e 05 e0 00 00:02:52.043 READ DMA c8 00 97 78 3e 00 e0 00 00:02:52.035 READ DMA c8 00 59 c0 f0 00 e0 00 00:02:52.033 READ DMA c8 00 93 10 3f 00 e0 00 00:02:52.032 READ DMA Error 9333 occurred at disk power-on lifetime: 7090 hours (295 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 15 99 36 00 e0 Error: ICRC, ABRT 21 sectors at LBA = 0x00003699 = 13977 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 96 18 36 00 e0 00 00:02:51.455 READ DMA c8 00 97 80 35 00 e0 00 00:02:51.446 READ DMA c8 00 08 38 3e 05 e0 00 00:02:51.434 READ DMA c8 00 58 28 35 00 e0 00 00:02:51.424 READ DMA c8 00 97 90 34 00 e0 00 00:02:51.410 READ DMA Error 9332 occurred at disk power-on lifetime: 7090 hours (295 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 66 d9 b6 00 e0 Error: ICRC, ABRT 102 sectors at LBA = 0x0000b6d9 = 46809 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 97 a8 b6 00 e0 00 00:02:50.133 READ DMA c8 00 5a 18 ed 00 e0 00 00:02:50.123 READ DMA c8 00 9a 40 b7 00 e0 00 00:02:50.108 READ DMA c8 00 08 e8 3d 05 e0 00 00:02:50.083 READ DMA c4 00 96 b0 e0 00 e0 00 00:02:49.584 READ MULTIPLE Error 9331 occurred at disk power-on lifetime: 7090 hours (295 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 05 41 e1 00 e0 Error: ICRC, ABRT 5 sectors at LBA = 0x0000e141 = 57665 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 96 b0 e0 00 e0 00 00:02:50.133 READ DMA c8 00 5a b8 ec 00 e0 00 00:02:50.123 READ DMA c8 00 08 e0 3d 05 e0 00 00:02:50.108 READ DMA c4 00 9b a0 e2 00 e0 00 00:02:50.083 READ MULTIPLE c8 00 9b a0 e2 00 e0 00 00:02:49.584 READ DMA Error 9330 occurred at disk power-on lifetime: 7090 hours (295 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 3a 01 e3 00 e0 Error: ICRC, ABRT 58 sectors at LBA = 0x0000e301 = 58113 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 9b a0 e2 00 e0 00 00:02:49.494 READ DMA c8 00 9b 40 e3 00 e0 00 00:02:49.493 READ DMA c8 00 08 d8 3d 05 e0 00 00:02:49.491 READ DMA c8 00 60 e0 37 00 e0 00 00:02:49.482 READ DMA c8 00 a9 c8 2c 00 e0 00 00:02:49.584 READ DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 7078 - # 2 Short offline Aborted by host 90% 7078 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 521 (0x0209) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Max Temperature: 0 Celsius Lifetime Max Temperature: 0 Celsius SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Maxtor DiamondMax 21 Device Model: MAXTOR STM3250820AS Serial Number: -- Firmware Version: 3.AAE User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Wed Mar 1 22:33:01 2017 WET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 25) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 92) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 104 082 006 - 222197015 3 Spin_Up_Time PO---- 095 095 000 - 0 4 Start_Stop_Count -O--CK 093 093 020 - 7936 5 Reallocated_Sector_Ct PO--CK 099 099 036 - 48 7 Seek_Error_Rate POSR-- 075 060 030 - 39275326 9 Power_On_Hours -O--CK 075 075 000 - 22599 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5273 187 Reported_Uncorrect -O--CK 001 001 000 - 797 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 059 032 045 Past 41 (255 255 41 28 0) 194 Temperature_Celsius -O---K 041 068 000 - 41 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 057 046 000 - 87783270 197 Current_Pending_Sector -O--C- 081 080 000 - 407 198 Offline_Uncorrectable ----C- 081 080 000 - 407 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 308 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 308 [7] occurred at disk power-on lifetime: 21904 hours (912 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 0c ef 29 d7 29 e0 00 Error: UNC at LBA = 0xcef29d729 = 55552104233 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 30 00 0c ef 00 d7 20 e0 00 01:11:30.916 READ DMA EXT 25 00 00 00 08 00 0c ef 00 d7 18 e0 00 01:11:30.916 READ DMA EXT 25 00 00 00 08 00 0c ef 00 d7 10 e0 00 01:11:30.915 READ DMA EXT 25 00 00 00 08 00 0c ef 00 d7 08 e0 00 01:11:30.915 READ DMA EXT 25 00 00 00 08 00 0c ef 00 d7 08 e0 00 01:11:30.915 READ DMA EXT Error 307 [6] occurred at disk power-on lifetime: 21904 hours (912 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 0c ef 29 d7 29 e0 00 Error: UNC at LBA = 0xcef29d729 = 55552104233 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 0c ee 00 d7 d0 e0 00 01:11:27.021 READ DMA EXT 25 00 00 00 08 00 17 ed 00 df f0 e0 00 01:11:27.012 READ DMA EXT 25 00 00 01 00 00 17 ec 00 df f0 e0 00 01:11:27.006 READ DMA EXT 25 00 00 01 00 00 0c ee 00 d7 d0 e0 00 01:11:26.980 READ DMA EXT 25 00 00 01 00 00 0c ed 00 d7 d0 e0 00 01:11:26.975 READ DMA EXT Error 306 [5] occurred at disk power-on lifetime: 21904 hours (912 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 0c ef 29 d7 29 e0 00 Error: UNC at LBA = 0xcef29d729 = 55552104233 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 0c ee 00 d7 d0 e0 00 01:11:27.021 READ DMA EXT 25 00 00 01 00 00 0c ed 00 d7 d0 e0 00 01:11:27.012 READ DMA EXT 25 00 00 01 00 00 0c ec 00 d7 d0 e0 00 01:11:27.006 READ DMA EXT 25 00 00 01 00 00 0c eb 00 d7 d0 e0 00 01:11:26.980 READ DMA EXT 25 00 00 01 00 00 0c ea 00 d7 d0 e0 00 01:11:26.975 READ DMA EXT Error 305 [4] occurred at disk power-on lifetime: 21904 hours (912 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 0c 46 74 b5 74 e0 00 Error: UNC at LBA = 0xc4674b574 = 52721661300 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 0c 46 00 b5 70 e0 00 01:10:00.291 READ DMA EXT 25 00 00 00 08 00 0c 46 00 b5 68 e0 00 01:10:00.272 READ DMA EXT 25 00 00 00 08 00 0c 46 00 b5 60 e0 00 01:10:00.272 READ DMA EXT 25 00 00 01 00 00 17 b8 00 e9 f8 e0 00 01:10:00.272 READ DMA EXT 25 00 00 00 08 00 0c 46 00 b5 58 e0 00 01:10:00.257 READ DMA EXT Error 304 [3] occurred at disk power-on lifetime: 21904 hours (912 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 0c ef 29 d7 29 e0 00 Error: UNC at LBA = 0xcef29d729 = 55552104233 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 30 00 0c ef 00 d7 20 e0 00 01:11:30.916 READ DMA EXT 25 00 00 00 08 00 0c ef 00 d7 18 e0 00 01:11:30.916 READ DMA EXT 25 00 00 00 08 00 0c ef 00 d7 10 e0 00 01:11:30.915 READ DMA EXT 25 00 00 00 08 00 0c ef 00 d7 08 e0 00 01:11:30.915 READ DMA EXT 25 00 00 00 08 00 0c ef 00 d7 08 e0 00 01:11:30.915 READ DMA EXT Error 303 [2] occurred at disk power-on lifetime: 21904 hours (912 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 0c ef 29 d7 29 e0 00 Error: UNC at LBA = 0xcef29d729 = 55552104233 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 0c ee 00 d7 d0 e0 00 01:11:27.021 READ DMA EXT 25 00 00 00 08 00 17 ed 00 df f0 e0 00 01:11:27.012 READ DMA EXT 25 00 00 01 00 00 17 ec 00 df f0 e0 00 01:11:27.006 READ DMA EXT 25 00 00 01 00 00 0c ee 00 d7 d0 e0 00 01:11:26.980 READ DMA EXT 25 00 00 01 00 00 0c ed 00 d7 d0 e0 00 01:11:26.975 READ DMA EXT Error 302 [1] occurred at disk power-on lifetime: 21904 hours (912 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 0c ef 29 d7 29 e0 00 Error: UNC at LBA = 0xcef29d729 = 55552104233 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 0c ee 00 d7 d0 e0 00 01:11:27.021 READ DMA EXT 25 00 00 01 00 00 0c ed 00 d7 d0 e0 00 01:11:27.012 READ DMA EXT 25 00 00 01 00 00 0c ec 00 d7 d0 e0 00 01:11:27.006 READ DMA EXT 25 00 00 01 00 00 0c eb 00 d7 d0 e0 00 01:11:26.980 READ DMA EXT 25 00 00 01 00 00 0c ea 00 d7 d0 e0 00 01:11:26.975 READ DMA EXT Error 301 [0] occurred at disk power-on lifetime: 21904 hours (912 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 0c 46 74 b5 74 e0 00 Error: UNC at LBA = 0xc4674b574 = 52721661300 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 0c 46 00 b5 70 e0 00 01:10:00.291 READ DMA EXT 25 00 00 00 08 00 0c 46 00 b5 68 e0 00 01:10:00.272 READ DMA EXT 25 00 00 00 08 00 0c 46 00 b5 60 e0 00 01:10:00.272 READ DMA EXT 25 00 00 01 00 00 17 b8 00 e9 f8 e0 00 01:10:00.272 READ DMA EXT 25 00 00 00 08 00 0c 46 00 b5 58 e0 00 01:10:00.257 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 22574 - # 2 Short offline Aborted by host 90% 22574 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS