Probe #aa52528043 of Packard Bell EasyNote TE11HC

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..59GSXP (AF) Device Model: TOSHIBA MK5059GSXP Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: GN003J User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jan 12 22:23:31 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 139) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 2150 4 Start_Stop_Count -O--CK 100 100 000 - 8567 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 112 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 058 058 000 - 16801 10 Spin_Retry_Count PO--CK 253 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 8178 191 G-Sense_Error_Rate -O--CK 100 100 000 - 28 192 Power-Off_Retract_Count -O--CK 100 100 000 - 211 193 Load_Cycle_Count -O--CK 086 086 000 - 147929 194 Temperature_Celsius -O---K 100 100 000 - 35 (Min/Max 13/47) 196 Reallocated_Event_Count -O--CK 100 100 000 - 8 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 220 Disk_Shift -O---- 100 100 000 - 79 222 Loaded_Hours -O--CK 064 064 000 - 14559 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 223 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 14851 - # 2 Short offline Completed without error 00% 12738 - # 3 Short offline Completed without error 00% 10754 - # 4 Short offline Completed without error 00% 10752 - # 5 Short offline Completed without error 00% 9526 - # 6 Short offline Completed without error 00% 273 - # 7 Short offline Completed without error 00% 9 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 27/35 Celsius Lifetime Min/Max Temperature: 13/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (58) Index Estimated Time Temperature Celsius 59 2020-01-12 14:26 32 ************* ... ..( 39 skipped). .. ************* 99 2020-01-12 15:06 32 ************* 100 2020-01-12 15:07 33 ************** ... ..( 53 skipped). .. ************** 154 2020-01-12 16:01 33 ************** 155 2020-01-12 16:02 34 *************** ... ..( 24 skipped). .. *************** 180 2020-01-12 16:27 34 *************** 181 2020-01-12 16:28 35 **************** 182 2020-01-12 16:29 35 **************** 183 2020-01-12 16:30 35 **************** 184 2020-01-12 16:31 34 *************** ... ..( 60 skipped). .. *************** 245 2020-01-12 17:32 34 *************** 246 2020-01-12 17:33 33 ************** ... ..( 15 skipped). .. ************** 262 2020-01-12 17:49 33 ************** 263 2020-01-12 17:50 34 *************** ... ..(107 skipped). .. *************** 371 2020-01-12 19:38 34 *************** 372 2020-01-12 19:39 33 ************** ... ..( 77 skipped). .. ************** 450 2020-01-12 20:57 33 ************** 451 2020-01-12 20:58 34 *************** 452 2020-01-12 20:59 33 ************** 453 2020-01-12 21:00 34 *************** 454 2020-01-12 21:01 33 ************** 455 2020-01-12 21:02 34 *************** ... ..( 38 skipped). .. *************** 16 2020-01-12 21:41 34 *************** 17 2020-01-12 21:42 35 **************** ... ..( 40 skipped). .. **************** 58 2020-01-12 22:23 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 162859 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub