Probe #ae9f25c32f of ASUSTek P5G41T-M LX2 Desktop Computer

Log: smartctl

/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-94-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.C Device Model: Hitachi HDS721010CLA332 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP4OA3MA User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Jan 13 22:09:25 2022 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9988) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 167) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 094 094 016 - 1376256 2 Throughput_Performance P-S--- 134 134 054 - 103 3 Spin_Up_Time POS--- 189 189 024 - 218 (Average 184) 4 Start_Stop_Count -O--C- 100 100 000 - 744 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 140 140 020 - 30 9 Power_On_Hours -O--C- 092 092 000 - 58364 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 744 192 Power-Off_Retract_Count -O--CK 100 100 000 - 790 193 Load_Cycle_Count -O--C- 100 100 000 - 790 194 Temperature_Celsius -O---- 206 206 000 - 29 (Min/Max 16/64) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 58308 - # 2 Short offline Completed without error 00% 57767 - # 3 Short offline Completed without error 00% 53220 - # 4 Short offline Completed without error 00% 19071 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 26/29 Celsius Lifetime Min/Max Temperature: 16/64 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (13) Index Estimated Time Temperature Celsius 14 2022-01-13 20:02 49 ****************************** 15 2022-01-13 20:03 49 ****************************** 16 2022-01-13 20:04 49 ****************************** 17 2022-01-13 20:05 50 ******************************* ... ..( 4 skipped). .. ******************************* 22 2022-01-13 20:10 50 ******************************* 23 2022-01-13 20:11 49 ****************************** 24 2022-01-13 20:12 50 ******************************* ... ..( 3 skipped). .. ******************************* 28 2022-01-13 20:16 50 ******************************* 29 2022-01-13 20:17 49 ****************************** 30 2022-01-13 20:18 49 ****************************** 31 2022-01-13 20:19 50 ******************************* ... ..( 2 skipped). .. ******************************* 34 2022-01-13 20:22 50 ******************************* 35 2022-01-13 20:23 49 ****************************** ... ..( 13 skipped). .. ****************************** 49 2022-01-13 20:37 49 ****************************** 50 2022-01-13 20:38 50 ******************************* 51 2022-01-13 20:39 49 ****************************** 52 2022-01-13 20:40 50 ******************************* 53 2022-01-13 20:41 50 ******************************* 54 2022-01-13 20:42 50 ******************************* 55 2022-01-13 20:43 49 ****************************** ... ..( 15 skipped). .. ****************************** 71 2022-01-13 20:59 49 ****************************** 72 2022-01-13 21:00 48 ***************************** 73 2022-01-13 21:01 48 ***************************** 74 2022-01-13 21:02 49 ****************************** 75 2022-01-13 21:03 49 ****************************** 76 2022-01-13 21:04 49 ****************************** 77 2022-01-13 21:05 48 ***************************** ... ..( 53 skipped). .. ***************************** 3 2022-01-13 21:59 48 ***************************** 4 2022-01-13 22:00 49 ****************************** 5 2022-01-13 22:01 49 ****************************** 6 2022-01-13 22:02 48 ***************************** ... ..( 2 skipped). .. ***************************** 9 2022-01-13 22:05 48 ***************************** 10 2022-01-13 22:06 ? - 11 2022-01-13 22:07 27 ******** 12 2022-01-13 22:08 28 ********* 13 2022-01-13 22:09 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 744 --- Lifetime Power-On Resets 0x01 0x010 4 58364 --- Power-on Hours 0x01 0x018 6 54951804310 --- Logical Sectors Written 0x01 0x020 6 629289671 --- Number of Write Commands 0x01 0x028 6 1297884257310 --- Logical Sectors Read 0x01 0x030 6 490439043 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 58351 --- Spindle Motor Power-on Hours 0x03 0x010 4 58351 --- Head Flying Hours 0x03 0x018 4 790 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 733 --- Read Recovery Attempts 0x03 0x030 4 2 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 704 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 29 --- Current Temperature 0x05 0x010 1 48 N-- Average Short Term Temperature 0x05 0x018 1 47 N-- Average Long Term Temperature 0x05 0x020 1 64 --- Highest Temperature 0x05 0x028 1 16 --- Lowest Temperature 0x05 0x030 1 55 N-- Highest Average Short Term Temperature 0x05 0x038 1 0 N-- Lowest Average Short Term Temperature 0x05 0x040 1 50 N-- Highest Average Long Term Temperature 0x05 0x048 1 0 N-- Lowest Average Long Term Temperature 0x05 0x050 4 90 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2323 --- Number of Hardware Resets 0x06 0x010 4 1586 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-94-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.B Device Model: Hitachi HDT721010SLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ST6OA31B User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Jan 13 22:09:27 2022 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14090) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 235) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 1 2 Throughput_Performance P-S--- 130 130 054 - 121 3 Spin_Up_Time POS--- 180 180 024 - 319 (Average 319) 4 Start_Stop_Count -O--C- 100 100 000 - 852 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 125 125 020 - 33 9 Power_On_Hours -O--C- 090 090 000 - 73432 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 852 192 Power-Off_Retract_Count -O--CK 097 097 000 - 3662 193 Load_Cycle_Count -O--C- 097 097 000 - 3662 194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 18/63) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7840 - # 2 Short offline Completed without error 00% 7840 - # 3 Short offline Completed without error 00% 7299 - # 4 Short offline Completed without error 00% 2752 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 28/31 Celsius Lifetime Min/Max Temperature: 18/63 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (117) Index Estimated Time Temperature Celsius 118 2022-01-13 20:02 54 *********************************** 119 2022-01-13 20:03 54 *********************************** 120 2022-01-13 20:04 55 ************************************ ... ..( 6 skipped). .. ************************************ 127 2022-01-13 20:11 55 ************************************ 0 2022-01-13 20:12 54 *********************************** 1 2022-01-13 20:13 54 *********************************** 2 2022-01-13 20:14 55 ************************************ 3 2022-01-13 20:15 55 ************************************ 4 2022-01-13 20:16 54 *********************************** ... ..( 7 skipped). .. *********************************** 12 2022-01-13 20:24 54 *********************************** 13 2022-01-13 20:25 55 ************************************ ... ..( 2 skipped). .. ************************************ 16 2022-01-13 20:28 55 ************************************ 17 2022-01-13 20:29 54 *********************************** 18 2022-01-13 20:30 55 ************************************ 19 2022-01-13 20:31 54 *********************************** ... ..( 92 skipped). .. *********************************** 112 2022-01-13 22:04 54 *********************************** 113 2022-01-13 22:05 ? - 114 2022-01-13 22:06 28 ********* 115 2022-01-13 22:07 29 ********** 116 2022-01-13 22:08 30 *********** 117 2022-01-13 22:09 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-94-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.B Device Model: Hitachi HDT721010SLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ST6OA31B User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Jan 13 22:09:28 2022 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14090) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 235) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 132 132 054 - 114 3 Spin_Up_Time POS--- 179 179 024 - 304 (Average 337) 4 Start_Stop_Count -O--C- 100 100 000 - 851 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 125 125 020 - 33 9 Power_On_Hours -O--C- 090 090 000 - 73426 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 851 192 Power-Off_Retract_Count -O--CK 097 097 000 - 3640 193 Load_Cycle_Count -O--C- 097 097 000 - 3640 194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 18/60) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7834 - # 2 Short offline Completed without error 00% 7293 - # 3 Short offline Completed without error 00% 2746 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 28/31 Celsius Lifetime Min/Max Temperature: 18/60 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (32) Index Estimated Time Temperature Celsius 33 2022-01-13 20:02 54 *********************************** ... ..( 8 skipped). .. *********************************** 42 2022-01-13 20:11 54 *********************************** 43 2022-01-13 20:12 53 ********************************** 44 2022-01-13 20:13 53 ********************************** 45 2022-01-13 20:14 54 *********************************** 46 2022-01-13 20:15 53 ********************************** ... ..( 8 skipped). .. ********************************** 55 2022-01-13 20:24 53 ********************************** 56 2022-01-13 20:25 54 *********************************** ... ..( 3 skipped). .. *********************************** 60 2022-01-13 20:29 54 *********************************** 61 2022-01-13 20:30 53 ********************************** ... ..( 22 skipped). .. ********************************** 84 2022-01-13 20:53 53 ********************************** 85 2022-01-13 20:54 52 ********************************* 86 2022-01-13 20:55 52 ********************************* 87 2022-01-13 20:56 53 ********************************** 88 2022-01-13 20:57 52 ********************************* ... ..( 2 skipped). .. ********************************* 91 2022-01-13 21:00 52 ********************************* 92 2022-01-13 21:01 53 ********************************** ... ..( 15 skipped). .. ********************************** 108 2022-01-13 21:17 53 ********************************** 109 2022-01-13 21:18 52 ********************************* 110 2022-01-13 21:19 52 ********************************* 111 2022-01-13 21:20 53 ********************************** 112 2022-01-13 21:21 52 ********************************* 113 2022-01-13 21:22 52 ********************************* 114 2022-01-13 21:23 53 ********************************** ... ..( 8 skipped). .. ********************************** 123 2022-01-13 21:32 53 ********************************** 124 2022-01-13 21:33 52 ********************************* 125 2022-01-13 21:34 52 ********************************* 126 2022-01-13 21:35 53 ********************************** 127 2022-01-13 21:36 52 ********************************* ... ..( 26 skipped). .. ********************************* 26 2022-01-13 22:03 52 ********************************* 27 2022-01-13 22:04 53 ********************************** 28 2022-01-13 22:05 ? - 29 2022-01-13 22:06 29 ********** 30 2022-01-13 22:07 29 ********** 31 2022-01-13 22:08 30 *********** 32 2022-01-13 22:09 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS


Hardware for Linux and BSD

GitHub