/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.9-113-tkg-upds] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST500LM012 HN-M500MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30010 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jan 23 20:24:35 2021 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6660) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 111) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 51481 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 089 075 025 - 3565 4 Start_Stop_Count -O--CK 095 095 000 - 5737 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 7252 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 099 099 000 - 1830 12 Power_Cycle_Count -O--CK 097 097 000 - 3421 191 G-Sense_Error_Rate -O---K 100 100 000 - 35 192 Power-Off_Retract_Count -O---K 099 099 000 - 1012 194 Temperature_Celsius -O---- 064 051 000 - 36 (Min/Max 8/52) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 4 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 95836 223 Load_Retry_Count -O--CK 099 099 000 - 1830 225 Load_Cycle_Count -O--CK 080 080 000 - 207814 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 47 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 47 [6] occurred at disk power-on lifetime: 1489 hours (62 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 ff c1 00 00 01 97 53 47 40 00 Error: ICRC, ABRT at LBA = 0x01975347 = 26694471 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 60 00 00 01 97 53 48 40 00 00:00:24.694 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 01 97 52 a8 40 00 00:00:24.748 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 01 7d b2 10 40 00 00:00:24.748 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 01 91 98 60 40 00 00:00:24.748 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 01 7a b8 d0 40 00 00:00:24.748 WRITE FPDMA QUEUED Error 46 [5] occurred at disk power-on lifetime: 1489 hours (62 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 ff 41 00 00 07 7a ec bf 40 00 Error: ICRC, ABRT at LBA = 0x077aecbf = 125496511 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 20 00 00 07 7a ec c0 40 00 00:00:23.606 WRITE FPDMA QUEUED 61 00 00 00 50 00 00 07 7a ec e0 40 00 00:00:23.607 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 07 7a eb e0 40 00 00:00:23.607 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 07 7a ea e0 40 00 00:00:23.607 WRITE FPDMA QUEUED 61 00 00 00 20 00 00 38 7f 1d 80 40 00 00:00:23.607 WRITE FPDMA QUEUED Error 45 [4] occurred at disk power-on lifetime: 1488 hours (62 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 01 81 00 00 30 ef 9f 4f 40 00 Error: ICRC, ABRT at LBA = 0x30ef9f4f = 821010255 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 01 00 00 00 30 ef 9f d0 40 00 00:00:21.610 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 30 ef b9 d0 40 00 00:00:21.610 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 30 ef b8 d0 40 00 00:00:21.610 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 30 ef b7 d0 40 00 00:00:21.610 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 30 ef b6 d0 40 00 00:00:21.610 WRITE FPDMA QUEUED Error 44 [3] occurred at disk power-on lifetime: 1485 hours (61 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 e1 00 00 1d 9d 05 0f 40 00 Error: ICRC, ABRT at LBA = 0x1d9d050f = 496829711 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 f0 00 00 1d 9d 05 10 40 00 00:00:10.062 WRITE FPDMA QUEUED 61 00 00 00 20 00 00 12 02 ec a0 40 00 00:00:10.063 WRITE FPDMA QUEUED 61 00 00 00 e0 00 00 1d 9d 0b 00 40 00 00:00:10.063 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 1d 9d 0a 00 40 00 00:00:10.063 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 1d 9d 09 00 40 00 00:00:10.063 WRITE FPDMA QUEUED Error 43 [2] occurred at disk power-on lifetime: 1076 hours (44 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 04 00 00 00 06 b7 88 40 00 Error: UNC 4 sectors at LBA = 0x0006b788 = 440200 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 00 06 b7 4c 40 00 00:00:00.014 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 0c 40 00 00:00:00.014 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 4c 40 00 00:00:00.012 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 0c 40 00 00:00:00.012 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 4c 40 00 00:00:00.009 READ DMA EXT Error 42 [1] occurred at disk power-on lifetime: 1076 hours (44 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 04 00 00 00 06 b7 88 40 00 Error: UNC 4 sectors at LBA = 0x0006b788 = 440200 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 00 06 b7 4c 40 00 00:00:00.012 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 0c 40 00 00:00:00.012 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 4c 40 00 00:00:00.009 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 0c 40 00 00:00:00.009 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 4c 40 00 00:00:00.007 READ DMA EXT Error 41 [0] occurred at disk power-on lifetime: 1076 hours (44 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 04 00 00 00 06 b7 88 40 00 Error: UNC 4 sectors at LBA = 0x0006b788 = 440200 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 00 06 b7 4c 40 00 00:00:00.009 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 0c 40 00 00:00:00.009 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 4c 40 00 00:00:00.007 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 0c 40 00 00:00:00.007 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 4c 40 00 00:00:00.005 READ DMA EXT Error 40 [7] occurred at disk power-on lifetime: 1076 hours (44 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 04 00 00 00 06 b7 88 40 00 Error: UNC 4 sectors at LBA = 0x0006b788 = 440200 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 00 06 b7 4c 40 00 00:00:00.007 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 0c 40 00 00:00:00.007 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 4c 40 00 00:00:00.005 READ DMA EXT 25 00 00 00 40 00 00 00 06 b7 0c 40 00 00:00:00.005 READ DMA EXT 25 00 00 00 40 00 00 00 06 b6 cc 40 00 00:00:00.005 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5085 - # 2 Short offline Completed without error 00% 4458 - # 3 Short offline Completed without error 00% 3388 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 31/39 Celsius Lifetime Min/Max Temperature: 9/52 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (4) Index Estimated Time Temperature Celsius 5 2021-01-23 09:45 36 ***************** 6 2021-01-23 09:50 35 **************** ... ..( 2 skipped). .. **************** 9 2021-01-23 10:05 35 **************** 10 2021-01-23 10:10 34 *************** ... ..( 4 skipped). .. *************** 15 2021-01-23 10:35 34 *************** 16 2021-01-23 10:40 35 **************** 17 2021-01-23 10:45 35 **************** 18 2021-01-23 10:50 35 **************** 19 2021-01-23 10:55 34 *************** ... ..( 6 skipped). .. *************** 26 2021-01-23 11:30 34 *************** 27 2021-01-23 11:35 33 ************** 28 2021-01-23 11:40 33 ************** 29 2021-01-23 11:45 33 ************** 30 2021-01-23 11:50 34 *************** 31 2021-01-23 11:55 33 ************** ... ..( 9 skipped). .. ************** 41 2021-01-23 12:45 33 ************** 42 2021-01-23 12:50 32 ************* 43 2021-01-23 12:55 32 ************* 44 2021-01-23 13:00 32 ************* 45 2021-01-23 13:05 33 ************** 46 2021-01-23 13:10 33 ************** 47 2021-01-23 13:15 32 ************* 48 2021-01-23 13:20 32 ************* 49 2021-01-23 13:25 28 ********* 50 2021-01-23 13:30 30 *********** 51 2021-01-23 13:35 31 ************ 52 2021-01-23 13:40 32 ************* 53 2021-01-23 13:45 32 ************* 54 2021-01-23 13:50 32 ************* 55 2021-01-23 13:55 33 ************** 56 2021-01-23 14:00 34 *************** 57 2021-01-23 14:05 35 **************** 58 2021-01-23 14:10 35 **************** 59 2021-01-23 14:15 35 **************** 60 2021-01-23 14:20 36 ***************** ... ..( 3 skipped). .. ***************** 64 2021-01-23 14:40 36 ***************** 65 2021-01-23 14:45 37 ****************** 66 2021-01-23 14:50 37 ****************** 67 2021-01-23 14:55 37 ****************** 68 2021-01-23 15:00 38 ******************* 69 2021-01-23 15:05 39 ******************** 70 2021-01-23 15:10 40 ********************* 71 2021-01-23 15:15 39 ******************** 72 2021-01-23 15:20 39 ******************** 73 2021-01-23 15:25 39 ******************** 74 2021-01-23 15:30 40 ********************* 75 2021-01-23 15:35 40 ********************* 76 2021-01-23 15:40 40 ********************* 77 2021-01-23 15:45 35 **************** 78 2021-01-23 15:50 36 ***************** 79 2021-01-23 15:55 37 ****************** 80 2021-01-23 16:00 37 ****************** 81 2021-01-23 16:05 38 ******************* ... ..( 7 skipped). .. ******************* 89 2021-01-23 16:45 38 ******************* 90 2021-01-23 16:50 39 ******************** 91 2021-01-23 16:55 39 ******************** 92 2021-01-23 17:00 38 ******************* ... ..( 9 skipped). .. ******************* 102 2021-01-23 17:50 38 ******************* 103 2021-01-23 17:55 37 ****************** 104 2021-01-23 18:00 37 ****************** 105 2021-01-23 18:05 38 ******************* 106 2021-01-23 18:10 37 ****************** 107 2021-01-23 18:15 37 ****************** 108 2021-01-23 18:20 37 ****************** 109 2021-01-23 18:25 38 ******************* 110 2021-01-23 18:30 37 ****************** 111 2021-01-23 18:35 37 ****************** 112 2021-01-23 18:40 37 ****************** 113 2021-01-23 18:45 36 ***************** ... ..( 3 skipped). .. ***************** 117 2021-01-23 19:05 36 ***************** 118 2021-01-23 19:10 35 **************** 119 2021-01-23 19:15 35 **************** 120 2021-01-23 19:20 36 ***************** 121 2021-01-23 19:25 37 ****************** 122 2021-01-23 19:30 36 ***************** ... ..( 9 skipped). .. ***************** 4 2021-01-23 20:20 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 9 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.9-113-tkg-upds] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z5K500 Device Model: HGST HTS545050A7E380 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GG2OAC90 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Jan 23 20:24:35 2021 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 112) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 209 209 033 - 1 4 Start_Stop_Count -O--C- 063 063 000 - 59327 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 079 079 000 - 9628 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 2728 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 099 099 000 - 279 193 Load_Cycle_Count -O--C- 085 085 000 - 157077 194 Temperature_Celsius -O---- 153 153 000 - 39 (Min/Max 11/49) 196 Reallocated_Event_Count -O--CK 100 100 000 - 80 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 371 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 371 [2] occurred at disk power-on lifetime: 3772 hours (157 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 10 00 00 02 aa 22 38 02 00 Error: WP at LBA = 0x02aa2238 = 44704312 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 80 00 58 00 00 0f 3a 24 98 40 00 1d+00:14:12.708 WRITE FPDMA QUEUED 61 00 08 00 50 00 00 00 6b 64 88 40 00 1d+00:14:12.708 WRITE FPDMA QUEUED 61 00 08 00 40 00 00 04 1c b6 88 40 00 1d+00:14:12.708 WRITE FPDMA QUEUED 61 00 80 00 38 00 00 10 99 86 80 40 00 1d+00:14:12.708 WRITE FPDMA QUEUED 61 00 80 00 30 00 00 10 99 85 00 40 00 1d+00:14:12.707 WRITE FPDMA QUEUED Error 370 [1] occurred at disk power-on lifetime: 3772 hours (157 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 10 00 00 02 aa 22 38 02 00 Error: WP at LBA = 0x02aa2238 = 44704312 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 68 00 00 04 1c 9d 60 40 00 1d+00:14:09.145 WRITE FPDMA QUEUED 61 00 80 00 60 00 00 0f 3a 22 98 40 00 1d+00:14:09.145 WRITE FPDMA QUEUED 61 00 80 00 58 00 00 0f 3a 22 18 40 00 1d+00:14:09.144 WRITE FPDMA QUEUED 61 00 80 00 48 00 00 0f 3a 21 98 40 00 1d+00:14:09.144 WRITE FPDMA QUEUED 61 00 08 00 40 00 00 00 6c 4a 60 40 00 1d+00:14:09.144 WRITE FPDMA QUEUED Error 369 [0] occurred at disk power-on lifetime: 3772 hours (157 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 10 00 00 02 aa 22 38 02 00 Error: WP at LBA = 0x02aa2238 = 44704312 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 80 00 50 00 00 0e e7 0f 58 40 00 1d+00:14:05.613 WRITE FPDMA QUEUED 61 00 08 00 58 00 00 04 1c 91 d8 40 00 1d+00:14:05.613 WRITE FPDMA QUEUED 61 00 80 00 38 00 00 0e e7 58 a0 40 00 1d+00:14:05.613 WRITE FPDMA QUEUED 61 00 68 00 30 00 00 00 6c 49 f0 40 00 1d+00:14:05.612 WRITE FPDMA QUEUED 60 00 38 00 28 00 00 0f a9 ce 98 40 00 1d+00:14:05.612 READ FPDMA QUEUED Error 368 [3] occurred at disk power-on lifetime: 3772 hours (157 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 10 00 00 02 aa 22 38 02 00 Error: WP at LBA = 0x02aa2238 = 44704312 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 20 00 00 00 6b 64 80 40 00 1d+00:14:02.050 WRITE FPDMA QUEUED 61 00 80 00 18 00 00 0e e7 56 20 40 00 1d+00:14:02.050 WRITE FPDMA QUEUED 61 00 80 00 10 00 00 0e e7 0b 18 40 00 1d+00:14:02.049 WRITE FPDMA QUEUED 60 00 40 00 60 00 00 02 53 4b c8 40 00 1d+00:14:02.049 READ FPDMA QUEUED 60 00 40 00 58 00 00 1f ac 20 f0 40 00 1d+00:14:02.049 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7356 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 30/42 Celsius Lifetime Min/Max Temperature: 11/49 Celsius Specified Max Operating Temperature: 33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (115) Index Estimated Time Temperature Celsius 116 2021-01-23 18:17 40 ********************* ... ..( 47 skipped). .. ********************* 36 2021-01-23 19:05 40 ********************* 37 2021-01-23 19:06 39 ******************** 38 2021-01-23 19:07 39 ******************** 39 2021-01-23 19:08 40 ********************* ... ..( 10 skipped). .. ********************* 50 2021-01-23 19:19 40 ********************* 51 2021-01-23 19:20 39 ******************** ... ..( 5 skipped). .. ******************** 57 2021-01-23 19:26 39 ******************** 58 2021-01-23 19:27 40 ********************* 59 2021-01-23 19:28 39 ******************** ... ..( 26 skipped). .. ******************** 86 2021-01-23 19:55 39 ******************** 87 2021-01-23 19:56 40 ********************* ... ..( 5 skipped). .. ********************* 93 2021-01-23 20:02 40 ********************* 94 2021-01-23 20:03 39 ******************** 95 2021-01-23 20:04 40 ********************* ... ..( 17 skipped). .. ********************* 113 2021-01-23 20:22 40 ********************* 114 2021-01-23 20:23 39 ******************** 115 2021-01-23 20:24 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.9-113-tkg-upds] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AR20003 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jan 23 20:24:37 2021 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13020) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 217) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 103 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 086 086 025 - 4462 4 Start_Stop_Count -O--CK 094 094 000 - 6106 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 10392 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 26 12 Power_Cycle_Count -O--CK 097 097 000 - 3417 191 G-Sense_Error_Rate -O---K 100 100 000 - 473 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 055 000 - 36 (Min/Max 11/51) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 741 223 Load_Retry_Count -O--CK 100 100 000 - 26 225 Load_Cycle_Count -O--CK 076 076 000 - 252024 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 4 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 [3] occurred at disk power-on lifetime: 2162 hours (90 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 4e 07 c4 80 40 00 Error: UNC 8 sectors at LBA = 0x4e07c480 = 1309131904 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d5 00 58 00 00 4e 07 c4 30 40 00 00:00:14.245 READ DMA EXT b0 00 d5 00 01 00 00 00 c2 4f c0 00 00 00:00:14.245 SMART READ LOG b0 00 d5 00 01 00 00 00 c2 4f 00 00 00 00:00:14.245 SMART READ LOG ef 00 03 00 46 00 00 00 08 cf 60 00 00 00:00:14.245 SET FEATURES [Set transfer mode] ef 00 03 00 46 00 00 00 08 cf 60 00 00 00:00:14.245 SET FEATURES [Set transfer mode] Error 3 [2] occurred at disk power-on lifetime: 2162 hours (90 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 4e 07 c4 80 40 00 Error: UNC at LBA = 0x4e07c480 = 1309131904 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 58 00 00 4e 07 c4 30 40 00 00:00:14.004 READ FPDMA QUEUED 61 00 01 00 20 00 00 4c 66 41 98 40 00 00:00:14.170 WRITE FPDMA QUEUED 60 00 01 00 08 00 00 4d b4 d5 f8 40 00 00:00:14.170 READ FPDMA QUEUED 61 00 01 01 30 00 00 4e a5 4f 00 40 00 00:00:14.170 WRITE FPDMA QUEUED 60 00 01 00 58 00 00 4e 07 c4 30 40 00 00:00:14.170 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 2162 hours (90 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 4e 07 c4 80 40 00 Error: UNC at LBA = 0x4e07c480 = 1309131904 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 58 00 00 4e 07 c4 30 40 00 00:00:14.004 READ FPDMA QUEUED 61 00 01 01 30 00 00 4e a5 4f 00 40 00 00:00:14.095 WRITE FPDMA QUEUED 60 00 01 00 08 00 00 4d b4 d5 f8 40 00 00:00:14.095 READ FPDMA QUEUED 61 00 01 00 20 00 00 4c 66 41 98 40 00 00:00:14.095 WRITE FPDMA QUEUED 61 00 01 00 08 00 00 4d 03 c6 48 40 00 00:00:14.095 WRITE FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 2162 hours (90 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 4e 07 c4 80 40 00 Error: UNC at LBA = 0x4e07c480 = 1309131904 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 58 00 00 4e 07 c4 30 40 00 00:00:14.004 READ FPDMA QUEUED 60 00 01 00 58 00 00 4e 07 c4 30 40 00 00:00:14.005 READ FPDMA QUEUED 60 00 01 00 08 00 00 4e 0a 67 e8 40 00 00:00:14.005 READ FPDMA QUEUED 60 00 01 00 08 00 00 4d de 68 70 40 00 00:00:14.005 READ FPDMA QUEUED 60 00 01 00 80 00 00 4d 4a 56 90 40 00 00:00:14.005 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 8336 - # 2 Short offline Completed without error 00% 7720 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 32/37 Celsius Lifetime Min/Max Temperature: 11/52 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (116) Index Estimated Time Temperature Celsius 117 2021-01-23 09:45 36 ***************** 118 2021-01-23 09:50 31 ************ 119 2021-01-23 09:55 32 ************* 120 2021-01-23 10:00 32 ************* 121 2021-01-23 10:05 33 ************** ... ..( 2 skipped). .. ************** 124 2021-01-23 10:20 33 ************** 125 2021-01-23 10:25 32 ************* 126 2021-01-23 10:30 31 ************ 127 2021-01-23 10:35 32 ************* 0 2021-01-23 10:40 33 ************** 1 2021-01-23 10:45 33 ************** 2 2021-01-23 10:50 35 **************** 3 2021-01-23 10:55 36 ***************** 4 2021-01-23 11:00 34 *************** 5 2021-01-23 11:05 33 ************** 6 2021-01-23 11:10 27 ******** 7 2021-01-23 11:15 29 ********** 8 2021-01-23 11:20 30 *********** 9 2021-01-23 11:25 34 *************** 10 2021-01-23 11:30 33 ************** 11 2021-01-23 11:35 31 ************ 12 2021-01-23 11:40 31 ************ 13 2021-01-23 11:45 32 ************* 14 2021-01-23 11:50 35 **************** 15 2021-01-23 11:55 36 ***************** 16 2021-01-23 12:00 32 ************* 17 2021-01-23 12:05 33 ************** 18 2021-01-23 12:10 34 *************** 19 2021-01-23 12:15 35 **************** 20 2021-01-23 12:20 36 ***************** 21 2021-01-23 12:25 37 ****************** 22 2021-01-23 12:30 37 ****************** 23 2021-01-23 12:35 33 ************** 24 2021-01-23 12:40 34 *************** 25 2021-01-23 12:45 36 ***************** ... ..( 2 skipped). .. ***************** 28 2021-01-23 13:00 36 ***************** 29 2021-01-23 13:05 37 ****************** 30 2021-01-23 13:10 37 ****************** 31 2021-01-23 13:15 37 ****************** 32 2021-01-23 13:20 36 ***************** ... ..( 4 skipped). .. ***************** 37 2021-01-23 13:45 36 ***************** 38 2021-01-23 13:50 37 ****************** 39 2021-01-23 13:55 36 ***************** ... ..( 2 skipped). .. ***************** 42 2021-01-23 14:10 36 ***************** 43 2021-01-23 14:15 35 **************** ... ..( 7 skipped). .. **************** 51 2021-01-23 14:55 35 **************** 52 2021-01-23 15:00 34 *************** ... ..( 4 skipped). .. *************** 57 2021-01-23 15:25 34 *************** 58 2021-01-23 15:30 33 ************** 59 2021-01-23 15:35 33 ************** 60 2021-01-23 15:40 34 *************** ... ..( 4 skipped). .. *************** 65 2021-01-23 16:05 34 *************** 66 2021-01-23 16:10 33 ************** ... ..( 7 skipped). .. ************** 74 2021-01-23 16:50 33 ************** 75 2021-01-23 16:55 31 ************ 76 2021-01-23 17:00 32 ************* 77 2021-01-23 17:05 34 *************** 78 2021-01-23 17:10 35 **************** 79 2021-01-23 17:15 36 ***************** ... ..( 2 skipped). .. ***************** 82 2021-01-23 17:30 36 ***************** 83 2021-01-23 17:35 37 ****************** ... ..( 2 skipped). .. ****************** 86 2021-01-23 17:50 37 ****************** 87 2021-01-23 17:55 35 **************** 88 2021-01-23 18:00 36 ***************** 89 2021-01-23 18:05 37 ****************** ... ..( 12 skipped). .. ****************** 102 2021-01-23 19:10 37 ****************** 103 2021-01-23 19:15 36 ***************** 104 2021-01-23 19:20 37 ****************** 105 2021-01-23 19:25 37 ****************** 106 2021-01-23 19:30 35 **************** 107 2021-01-23 19:35 34 *************** 108 2021-01-23 19:40 35 **************** 109 2021-01-23 19:45 35 **************** 110 2021-01-23 19:50 35 **************** 111 2021-01-23 19:55 36 ***************** 112 2021-01-23 20:00 37 ****************** ... ..( 2 skipped). .. ****************** 115 2021-01-23 20:15 37 ****************** 116 2021-01-23 20:20 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 28 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 11 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdd smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.9-113-tkg-upds] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST3500630NS Q Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 3.BTJ User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sat Jan 23 20:24:37 2021 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0xffff (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 60) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 163) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -OSR-- 100 253 006 - 0 3 Spin_Up_Time PO---- 093 093 000 - 0 4 Start_Stop_Count -O--CK 097 097 020 - 3325 5 Reallocated_Sector_Ct PO--CK 043 043 036 - 2282 7 Seek_Error_Rate POSR-- 061 054 030 - 528454264365 9 Power_On_Hours -O--CK 095 095 000 - 4825 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 098 098 020 - 2369 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 055 032 045 Past 45 (Min/Max 34/47 #224) 194 Temperature_Celsius -O---K 045 068 000 - 45 (0 14 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 064 044 000 - 70676992 197 Current_Pending_Sector -O--C- 001 001 000 - 4294967271 198 Offline_Uncorrectable ----C- 001 001 000 - 4294967271 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 90 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 90 [9] occurred at disk power-on lifetime: 1608 hours (67 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 34 54 c8 20 c8 40 00 Error: UNC at LBA = 0x3454c820c8 = 224760701128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.220 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.139 READ DMA EXT ef 00 02 01 00 00 00 00 00 00 00 40 00 00:08:56.108 SET FEATURES [Enable write cache] ef 00 aa 01 00 00 00 00 00 00 00 40 00 00:08:56.103 SET FEATURES [Enable read look-ahead] c6 00 00 00 10 00 00 00 00 00 00 40 00 00:08:56.097 SET MULTIPLE MODE Error 89 [8] occurred at disk power-on lifetime: 1608 hours (67 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 34 54 c8 20 c8 40 00 Error: UNC at LBA = 0x3454c820c8 = 224760701128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.220 READ DMA EXT ef 00 02 01 00 00 00 00 00 00 00 40 00 00:08:56.139 SET FEATURES [Enable write cache] ef 00 aa 01 00 00 00 00 00 00 00 40 00 00:08:56.108 SET FEATURES [Enable read look-ahead] c6 00 00 00 10 00 00 00 00 00 00 40 00 00:08:56.103 SET MULTIPLE MODE ef 00 10 00 03 00 00 00 00 00 00 40 00 00:08:56.097 SET FEATURES [Enable SATA feature] Error 88 [7] occurred at disk power-on lifetime: 1609 hours (67 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 34 54 c8 20 c8 40 00 Error: UNC at LBA = 0x3454c820c8 = 224760701128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.220 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.139 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.108 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.103 READ DMA EXT ef 00 02 01 00 00 00 00 00 00 00 40 00 00:08:56.097 SET FEATURES [Enable write cache] Error 87 [6] occurred at disk power-on lifetime: 1609 hours (67 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 34 54 c8 20 c8 40 00 Error: UNC at LBA = 0x3454c820c8 = 224760701128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.220 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.139 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.108 READ DMA EXT ef 00 02 01 00 00 00 00 00 00 00 40 00 00:08:56.103 SET FEATURES [Enable write cache] ef 00 aa 01 00 00 00 00 00 00 00 40 00 00:08:56.097 SET FEATURES [Enable read look-ahead] Error 86 [5] occurred at disk power-on lifetime: 1608 hours (67 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 34 54 c8 20 c8 40 00 Error: UNC at LBA = 0x3454c820c8 = 224760701128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.220 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.139 READ DMA EXT ef 00 02 01 00 00 00 00 00 00 00 40 00 00:08:56.108 SET FEATURES [Enable write cache] ef 00 aa 01 00 00 00 00 00 00 00 40 00 00:08:56.103 SET FEATURES [Enable read look-ahead] c6 00 00 00 10 00 00 00 00 00 00 40 00 00:08:56.097 SET MULTIPLE MODE Error 85 [4] occurred at disk power-on lifetime: 1608 hours (67 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 34 54 c8 20 c8 40 00 Error: UNC at LBA = 0x3454c820c8 = 224760701128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.220 READ DMA EXT ef 00 02 01 00 00 00 00 00 00 00 40 00 00:08:56.139 SET FEATURES [Enable write cache] ef 00 aa 01 00 00 00 00 00 00 00 40 00 00:08:56.108 SET FEATURES [Enable read look-ahead] c6 00 00 00 10 00 00 00 00 00 00 40 00 00:08:56.103 SET MULTIPLE MODE ef 00 10 00 03 00 00 00 00 00 00 40 00 00:08:56.097 SET FEATURES [Enable SATA feature] Error 84 [3] occurred at disk power-on lifetime: 1609 hours (67 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 34 54 c8 20 c8 40 00 Error: UNC at LBA = 0x3454c820c8 = 224760701128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.220 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.139 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.108 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.103 READ DMA EXT ef 00 02 01 00 00 00 00 00 00 00 40 00 00:08:56.097 SET FEATURES [Enable write cache] Error 83 [2] occurred at disk power-on lifetime: 1609 hours (67 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 34 54 c8 20 c8 40 00 Error: UNC at LBA = 0x3454c820c8 = 224760701128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.220 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.139 READ DMA EXT 25 00 00 01 00 00 34 54 00 20 c8 40 00 00:08:56.108 READ DMA EXT ef 00 02 01 00 00 00 00 00 00 00 40 00 00:08:56.103 SET FEATURES [Enable write cache] ef 00 aa 01 00 00 00 00 00 00 00 40 00 00:08:56.097 SET FEATURES [Enable read look-ahead] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3047 - # 2 Short offline Completed without error 00% 3047 - # 3 Short offline Completed without error 00% 2779 - # 4 Short offline Completed without error 00% 2061 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 521 (0x0209) Device State: Active (0) Current Temperature: 45 Celsius Power Cycle Min/Max Temperature: --/47 Celsius Lifetime Min/Max Temperature: --/68 Celsius Another SCT command is executing, abort Read Data Table (SCT ext_status_code 0xffff, action_code=4, function_code=2) Read SCT Temperature History failed Another SCT command is executing, abort Error Recovery Control (SCT ext_status_code 0xffff, action_code=4, function_code=2) SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 12 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS