/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.13-200.fc39.x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: PLEXTOR PX-256M8PeG Serial Number: -- Firmware Version: 1.05 PCI Vendor ID: 0x14a4 PCI Vendor Subsystem ID: 0x1b4b IEEE OUI Identifier: 0x002303 Total NVM Capacity: 256,060,514,304 [256 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.2 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Utilization: 0 Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002303 ... Local Time is: Sun Jan 28 12:44:22 2024 CET Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x001f): Security Format Frmw_DL NS_Mngmt Self_Test Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 32 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 95 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.00W - - 0 0 0 0 0 0 1 + 4.00W - - 1 1 1 1 5 5 2 + 2.10W - - 2 2 2 2 5 5 3 - 0.1000W - - 3 3 3 3 5000 5000 4 - 0.0100W - - 4 4 4 4 50000 100000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 - 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 50 Celsius Available Spare: 100% Available Spare Threshold: 0% Percentage Used: 3% Data Units Read: 12,890,142 [6.59 TB] Data Units Written: 11,699,630 [5.99 TB] Host Read Commands: 199,547,950 Host Write Commands: 218,343,776 Controller Busy Time: 96,357 Power Cycles: 532 Power On Hours: 2,164 Unsafe Shutdowns: 61 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 50 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged Self-test Log (NVMe Log 0x06) Self-test status: No self-test in progress Num Test_Description Status Power_on_Hours Failing_LBA NSID Seg SCT Code 0 Short Completed without error 2164 - - - - - /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.13-200.fc39.x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT02B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 28 12:44:22 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 3236 12 Power_Cycle_Count -O--CK 099 099 000 - 535 177 Wear_Leveling_Count PO--C- 099 099 000 - 2 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 075 064 000 - 25 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 55 241 Total_LBAs_Written -O--CK 099 099 000 - 976576654 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 25/25 Celsius Lifetime Min/Max Temperature: 15/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (94) Index Estimated Time Temperature Celsius 95 2024-01-27 15:30 ? - 96 2024-01-27 15:40 25 ****** ... ..( 2 skipped). .. ****** 99 2024-01-27 16:10 25 ****** 100 2024-01-27 16:20 ? - 101 2024-01-27 16:30 25 ****** ... ..( 6 skipped). .. ****** 108 2024-01-27 17:40 25 ****** 109 2024-01-27 17:50 ? - 110 2024-01-27 18:00 ? - 111 2024-01-27 18:10 25 ****** 112 2024-01-27 18:20 ? - 113 2024-01-27 18:30 22 *** 114 2024-01-27 18:40 22 *** 115 2024-01-27 18:50 23 **** 116 2024-01-27 19:00 24 ***** 117 2024-01-27 19:10 ? - 118 2024-01-27 19:20 25 ****** ... ..( 14 skipped). .. ****** 5 2024-01-27 21:50 25 ****** 6 2024-01-27 22:00 ? - 7 2024-01-27 22:10 25 ****** ... ..( 10 skipped). .. ****** 18 2024-01-28 00:00 25 ****** 19 2024-01-28 00:10 ? - 20 2024-01-28 00:20 24 ***** 21 2024-01-28 00:30 25 ****** ... ..( 11 skipped). .. ****** 33 2024-01-28 02:30 25 ****** 34 2024-01-28 02:40 ? - 35 2024-01-28 02:50 24 ***** ... ..( 2 skipped). .. ***** 38 2024-01-28 03:20 24 ***** 39 2024-01-28 03:30 25 ****** ... ..( 4 skipped). .. ****** 44 2024-01-28 04:20 25 ****** 45 2024-01-28 04:30 ? - 46 2024-01-28 04:40 24 ***** ... ..( 2 skipped). .. ***** 49 2024-01-28 05:10 24 ***** 50 2024-01-28 05:20 ? - 51 2024-01-28 05:30 19 - 52 2024-01-28 05:40 21 ** 53 2024-01-28 05:50 22 *** 54 2024-01-28 06:00 ? - 55 2024-01-28 06:10 23 **** ... ..( 2 skipped). .. **** 58 2024-01-28 06:40 23 **** 59 2024-01-28 06:50 24 ***** 60 2024-01-28 07:00 24 ***** 61 2024-01-28 07:10 24 ***** 62 2024-01-28 07:20 ? - 63 2024-01-28 07:30 21 ** 64 2024-01-28 07:40 22 *** 65 2024-01-28 07:50 23 **** ... ..( 2 skipped). .. **** 68 2024-01-28 08:20 23 **** 69 2024-01-28 08:30 24 ***** 70 2024-01-28 08:40 24 ***** 71 2024-01-28 08:50 24 ***** 72 2024-01-28 09:00 25 ****** 73 2024-01-28 09:10 24 ***** 74 2024-01-28 09:20 24 ***** 75 2024-01-28 09:30 24 ***** 76 2024-01-28 09:40 ? - 77 2024-01-28 09:50 21 ** 78 2024-01-28 10:00 23 **** 79 2024-01-28 10:10 24 ***** 80 2024-01-28 10:20 24 ***** 81 2024-01-28 10:30 24 ***** 82 2024-01-28 10:40 25 ****** ... ..( 9 skipped). .. ****** 92 2024-01-28 12:20 25 ****** 93 2024-01-28 12:30 ? - 94 2024-01-28 12:40 25 ****** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC