/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.14-desktop-1omv4002] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M7E Device Model: ST160LM000 HM161GI Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AJ10001 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Feb 13 19:58:44 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 0 (vendor specific), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2280) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 38) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 2 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 089 089 025 - 3412 4 Start_Stop_Count -O--CK 099 099 000 - 1738 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 3118 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 84 12 Power_Cycle_Count -O--CK 099 099 000 - 1115 191 G-Sense_Error_Rate -O---K 100 100 000 - 2240 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 053 000 - 24 (Min/Max 15/48) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 36 223 Load_Retry_Count -O--CK 100 100 000 - 84 225 Load_Cycle_Count -O--CK 098 098 000 - 28096 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 3070 hours (127 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 f0 00 00 00 db df 20 40 00 Error: ICRC, ABRT at LBA = 0x00dbdf20 = 14409504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 f0 00 00 00 db df 30 40 08 00:00:04.121 READ FPDMA QUEUED 60 00 00 00 88 00 00 00 cc 84 d8 40 08 00:00:04.122 READ FPDMA QUEUED 61 00 00 02 00 00 00 09 54 09 20 40 08 00:00:04.122 WRITE FPDMA QUEUED 60 00 00 01 00 00 00 00 dc 6e d0 40 08 00:00:04.122 READ FPDMA QUEUED 60 00 00 01 00 00 00 00 dc 6d d0 40 08 00:00:04.122 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1731 - # 2 Short offline Completed without error 00% 1662 - # 3 Extended offline Aborted by host 50% 1579 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 19/24 Celsius Lifetime Min/Max Temperature: 16/58 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (92) Index Estimated Time Temperature Celsius 93 2021-02-13 09:20 24 ***** 94 2021-02-13 09:25 25 ****** 95 2021-02-13 09:30 27 ******** 96 2021-02-13 09:35 28 ********* 97 2021-02-13 09:40 28 ********* 98 2021-02-13 09:45 28 ********* 99 2021-02-13 09:50 29 ********** 100 2021-02-13 09:55 29 ********** 101 2021-02-13 10:00 29 ********** 102 2021-02-13 10:05 30 *********** 103 2021-02-13 10:10 31 ************ 104 2021-02-13 10:15 28 ********* 105 2021-02-13 10:20 28 ********* 106 2021-02-13 10:25 28 ********* 107 2021-02-13 10:30 27 ******** 108 2021-02-13 10:35 27 ******** 109 2021-02-13 10:40 24 ***** 110 2021-02-13 10:45 27 ******** 111 2021-02-13 10:50 28 ********* ... ..( 2 skipped). .. ********* 114 2021-02-13 11:05 28 ********* 115 2021-02-13 11:10 29 ********** ... ..( 2 skipped). .. ********** 118 2021-02-13 11:25 29 ********** 119 2021-02-13 11:30 30 *********** 120 2021-02-13 11:35 29 ********** 121 2021-02-13 11:40 31 ************ 122 2021-02-13 11:45 32 ************* 123 2021-02-13 11:50 31 ************ 124 2021-02-13 11:55 31 ************ 125 2021-02-13 12:00 30 *********** ... ..( 3 skipped). .. *********** 1 2021-02-13 12:20 30 *********** 2 2021-02-13 12:25 29 ********** ... ..( 9 skipped). .. ********** 12 2021-02-13 13:15 29 ********** 13 2021-02-13 13:20 30 *********** 14 2021-02-13 13:25 30 *********** 15 2021-02-13 13:30 30 *********** 16 2021-02-13 13:35 26 ******* 17 2021-02-13 13:40 28 ********* 18 2021-02-13 13:45 28 ********* 19 2021-02-13 13:50 29 ********** 20 2021-02-13 13:55 29 ********** 21 2021-02-13 14:00 29 ********** 22 2021-02-13 14:05 28 ********* 23 2021-02-13 14:10 28 ********* 24 2021-02-13 14:15 27 ******** ... ..( 3 skipped). .. ******** 28 2021-02-13 14:35 27 ******** 29 2021-02-13 14:40 26 ******* 30 2021-02-13 14:45 26 ******* 31 2021-02-13 14:50 26 ******* 32 2021-02-13 14:55 24 ***** 33 2021-02-13 15:00 25 ****** 34 2021-02-13 15:05 25 ****** 35 2021-02-13 15:10 25 ****** 36 2021-02-13 15:15 26 ******* 37 2021-02-13 15:20 23 **** 38 2021-02-13 15:25 24 ***** 39 2021-02-13 15:30 26 ******* 40 2021-02-13 15:35 27 ******** 41 2021-02-13 15:40 27 ******** 42 2021-02-13 15:45 28 ********* 43 2021-02-13 15:50 28 ********* 44 2021-02-13 15:55 29 ********** 45 2021-02-13 16:00 30 *********** 46 2021-02-13 16:05 30 *********** 47 2021-02-13 16:10 30 *********** 48 2021-02-13 16:15 23 **** 49 2021-02-13 16:20 25 ****** 50 2021-02-13 16:25 27 ******** 51 2021-02-13 16:30 28 ********* 52 2021-02-13 16:35 28 ********* 53 2021-02-13 16:40 27 ******** 54 2021-02-13 16:45 28 ********* 55 2021-02-13 16:50 28 ********* 56 2021-02-13 16:55 29 ********** 57 2021-02-13 17:00 29 ********** 58 2021-02-13 17:05 30 *********** ... ..( 3 skipped). .. *********** 62 2021-02-13 17:25 30 *********** 63 2021-02-13 17:30 31 ************ 64 2021-02-13 17:35 31 ************ 65 2021-02-13 17:40 31 ************ 66 2021-02-13 17:45 32 ************* 67 2021-02-13 17:50 33 ************** 68 2021-02-13 17:55 33 ************** 69 2021-02-13 18:00 32 ************* ... ..( 2 skipped). .. ************* 72 2021-02-13 18:15 32 ************* 73 2021-02-13 18:20 31 ************ 74 2021-02-13 18:25 30 *********** 75 2021-02-13 18:30 29 ********** 76 2021-02-13 18:35 27 ******** 77 2021-02-13 18:40 27 ******** 78 2021-02-13 18:45 28 ********* 79 2021-02-13 18:50 28 ********* 80 2021-02-13 18:55 28 ********* 81 2021-02-13 19:00 23 **** 82 2021-02-13 19:05 26 ******* 83 2021-02-13 19:10 28 ********* 84 2021-02-13 19:15 28 ********* 85 2021-02-13 19:20 29 ********** 86 2021-02-13 19:25 30 *********** 87 2021-02-13 19:30 30 *********** 88 2021-02-13 19:35 31 ************ 89 2021-02-13 19:40 32 ************* 90 2021-02-13 19:45 32 ************* 91 2021-02-13 19:50 31 ************ 92 2021-02-13 19:55 23 **** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 8076 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 11 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.14-desktop-1omv4002] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M8 (AF) Device Model: SAMSUNG HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AR10001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Feb 13 19:58:45 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Disabled AAM level is: 128 (quiet), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled SMART Disabled. Use option -s with argument 'on' to enable it. (override with '-T permissive' option) /dev/sdd smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.14-desktop-1omv4002] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD5000BEVT-26A0RT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Feb 13 19:58:46 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Disabled AAM level is: 128 (quiet), recommended: 128 APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled SMART Disabled. Use option -s with argument 'on' to enable it. (override with '-T permissive' option)