/dev/sda === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax Plus 9 Device Model: Maxtor 6Y080P0 Serial Number: -- Firmware Version: YAR41BW0 User Capacity: 81 963 220 480 bytes [81,9 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Wed Mar 8 23:10:04 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 241) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time POS--K 225 224 063 - 8071 4 Start_Stop_Count -O--CK 250 250 000 - 5968 5 Reallocated_Sector_Ct PO--CK 253 253 063 - 0 6 Read_Channel_Margin P----- 253 253 100 - 0 7 Seek_Error_Rate -O-R-- 253 252 000 - 0 8 Seek_Time_Performance POS--K 251 234 187 - 60024 9 Power_On_Minutes -O--CK 199 199 000 - 404h+10m 10 Spin_Retry_Count PO-R-K 253 252 157 - 0 11 Calibration_Retry_Count PO-R-K 253 252 223 - 0 12 Power_Cycle_Count -O--CK 231 231 000 - 8756 192 Power-Off_Retract_Count -O--CK 253 253 000 - 0 193 Load_Cycle_Count -O--CK 253 253 000 - 0 194 Temperature_Celsius -O--CK 253 253 000 - 42 195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 865 196 Reallocated_Event_Count ---R-- 253 253 000 - 0 197 Current_Pending_Sector ---R-- 253 253 000 - 0 198 Offline_Uncorrectable ---R-- 253 253 000 - 0 199 UDMA_CRC_Error_Count ---R-- 115 001 000 - 4283 200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 221 000 - 0 202 Data_Address_Mark_Errs -O-R-- 253 252 000 - 0 203 Run_Out_Cancel PO-R-- 253 252 180 - 0 204 Soft_ECC_Correction -O-R-- 253 252 000 - 0 205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0 207 Spin_High_Current -O-R-K 253 252 000 - 0 208 Spin_Buzz -O-R-K 253 252 000 - 0 209 Offline_Seek_Performnce --S--K 194 188 000 - 0 99 Unknown_Attribute --S--- 253 253 000 - 0 100 Unknown_Attribute --S--- 253 253 000 - 0 101 Unknown_Attribute --S--- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error badly formed scsi parameters ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters Read GP Log Directory failed SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 Warning: ATA error count 4343 inconsistent with error log pointer 5 ATA Error Count: 4343 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4343 occurred at disk power-on lifetime: 13301 hours (554 days + 5 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 02 44 f6 5b f0 Error: UNC at LBA = 0x005bf644 = 6026820 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 08 3f f6 5b f0 00 00:02:15.760 READ SECTOR(S) c6 00 00 45 f6 5b b0 00 00:02:15.744 SET MULTIPLE MODE 20 00 08 3f f6 5b f0 00 00:02:14.672 READ SECTOR(S) 20 00 08 2f f6 5b f0 00 00:02:14.672 READ SECTOR(S) 20 00 08 27 f6 5b f0 00 00:02:14.672 READ SECTOR(S) Error 4342 occurred at disk power-on lifetime: 13301 hours (554 days + 5 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 02 44 f6 5b f0 Error: UNC at LBA = 0x005bf644 = 6026820 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 08 3f f6 5b f0 00 00:02:14.672 READ SECTOR(S) 20 00 08 2f f6 5b f0 00 00:02:14.672 READ SECTOR(S) 20 00 08 27 f6 5b f0 00 00:02:14.672 READ SECTOR(S) 20 00 08 4f 00 00 f0 00 00:02:14.656 READ SECTOR(S) 20 00 08 3f 00 60 f0 00 00:02:14.640 READ SECTOR(S) Error 4341 occurred at disk power-on lifetime: 12833 hours (534 days + 17 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 20 01 00 00 00 f0 08 00:07:26.032 READ DMA c6 20 10 01 00 00 ff 08 00:07:26.032 SET MULTIPLE MODE 91 20 3f 01 00 00 ff 08 00:07:26.032 INITIALIZE DEVICE PARAMETERS [OBS-6] f5 20 00 3e c5 fa f0 04 00:07:26.016 SECURITY FREEZE LOCK f5 20 00 3e c5 fa f0 08 00:07:25.872 SECURITY FREEZE LOCK Error 4340 occurred at disk power-on lifetime: 12817 hours (534 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 01 00 00 b0 Error: ICRC, ABRT at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 20 01 01 00 00 b0 08 00:55:03.168 READ DMA ef 03 45 01 4f c2 b0 08 00:55:03.136 SET FEATURES [Set transfer mode] ef 03 0c 01 4f c2 b0 08 00:55:03.136 SET FEATURES [Set transfer mode] c6 da 10 01 4f c2 b0 08 00:55:03.136 SET MULTIPLE MODE b0 da 00 01 4f c2 b0 08 00:55:03.120 SMART RETURN STATUS Error 4339 occurred at disk power-on lifetime: 12817 hours (534 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 7f 16 cb f3 Error: ICRC, ABRT at LBA = 0x03cb167f = 63641215 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 38 7f 16 cb f3 00 00:52:36.720 READ DMA c8 00 08 77 16 cb f3 00 00:52:36.624 READ DMA c8 00 05 47 d8 ee f3 00 00:52:36.576 READ DMA ca 00 10 bf a8 80 f2 00 00:52:36.192 WRITE DMA ca 00 08 07 89 5e f0 00 00:52:36.128 WRITE DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3160815A Serial Number: -- Firmware Version: 3.AAD User Capacity: 152 058 396 672 bytes [152 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Wed Mar 8 23:10:05 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 115 086 006 - 90498997 3 Spin_Up_Time PO---- 098 097 000 - 0 4 Start_Stop_Count -O--CK 096 096 020 - 4723 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 088 060 030 - 793414915 9 Power_On_Hours -O--CK 072 072 000 - 24723 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 096 096 020 - 4421 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 062 042 045 Past 38 (0 88 38 34 0) 194 Temperature_Celsius -O---K 038 058 000 - 38 (0 15 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 080 057 000 - 36267873 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 199 000 - 35 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23552 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 54 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 54 [13] occurred at disk power-on lifetime: 21900 hours (912 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 40 00 14 00 00 00 00 00 e0 00 Error: ICRC, ABRT 16384 sectors at LBA = 0x140000000000 = 21990232555520 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 40 00 00 66 00 14 77 e0 00 00:00:40.841 READ DMA ca 00 00 00 08 00 00 5b 00 08 bf e0 00 00:00:40.841 WRITE DMA ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:00:09.765 IDENTIFY DEVICE ef 00 03 00 45 00 00 3f 00 00 00 a0 00 00:00:04.297 SET FEATURES [Set transfer mode] ef 00 03 00 0c 00 00 3f 00 00 00 a0 00 09:10:38.209 SET FEATURES [Set transfer mode] Error 53 [12] occurred at disk power-on lifetime: 20812 hours (867 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 08 c7 00 d9 9f e0 00 00:05:14.136 READ DMA EXT 25 00 d8 00 08 00 08 c7 00 d9 97 e0 00 00:05:14.136 READ DMA EXT 25 00 d8 00 08 00 08 c7 00 d9 8f e0 00 00:05:14.136 READ DMA EXT 25 00 d8 00 08 00 08 c7 00 d9 87 e0 00 00:05:14.136 READ DMA EXT 25 00 d8 00 08 00 08 c7 00 d9 7f e0 00 00:05:14.136 READ DMA EXT Error 52 [11] occurred at disk power-on lifetime: 20812 hours (867 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 08 c7 00 d9 3f e0 00 00:05:13.176 READ DMA EXT 25 00 d8 00 08 00 08 c7 00 d9 37 e0 00 00:05:13.176 READ DMA EXT 25 00 d8 00 08 00 08 c7 00 d9 2f e0 00 00:05:13.176 READ DMA EXT 25 00 d8 00 08 00 08 c7 00 d9 27 e0 00 00:05:13.176 READ DMA EXT 25 00 d8 00 08 00 08 c7 00 d9 1f e0 00 00:05:13.176 READ DMA EXT Error 51 [10] occurred at disk power-on lifetime: 20812 hours (867 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 00 00 00 00 3f e0 00 00:05:12.112 READ DMA EXT 25 00 d8 00 01 00 00 00 00 00 00 e0 00 00:05:12.102 READ DMA EXT 25 00 d8 00 01 00 00 00 00 00 00 e0 00 00:05:12.102 READ DMA EXT 25 00 d8 00 01 00 00 00 00 00 00 e0 00 00:05:12.102 READ DMA EXT 35 00 d8 00 01 00 00 00 00 00 00 e0 00 00:05:12.102 WRITE DMA EXT Error 50 [9] occurred at disk power-on lifetime: 20812 hours (867 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 f6 00 5b 27 e0 00 00:01:50.718 READ DMA EXT 25 00 00 00 08 00 00 00 00 00 4f e0 00 00:01:50.718 READ DMA EXT 25 00 00 00 08 00 00 00 00 60 3f e0 00 00:01:50.717 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 3f e0 00 00:01:45.283 READ DMA EXT ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:45.270 IDENTIFY DEVICE Error 49 [8] occurred at disk power-on lifetime: 20812 hours (867 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 20 00 01 00 00 00 00 00 3f e0 00 00:00:23.647 READ DMA EXT 25 00 20 00 01 00 00 00 00 00 00 e0 00 00:00:23.647 READ DMA EXT c6 00 20 00 10 00 0f 00 00 00 01 ef 00 00:00:23.639 SET MULTIPLE MODE 91 00 20 00 3f 00 0f 00 00 00 01 ef 00 00:00:15.859 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 01 00 00 00 01 e1 00 00:00:15.468 RECALIBRATE [OBS-4] Error 48 [7] occurred at disk power-on lifetime: 20791 hours (866 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 20 00 01 00 00 00 00 00 3f e0 00 00:00:23.384 READ DMA EXT 25 00 20 00 01 00 00 00 00 00 00 e0 00 00:00:23.384 READ DMA EXT c6 00 20 00 10 00 0f 00 00 00 01 ef 00 00:00:23.377 SET MULTIPLE MODE 91 00 20 00 3f 00 0f 00 00 00 01 ef 00 00:00:15.593 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 01 00 00 00 01 e1 00 00:00:15.190 RECALIBRATE [OBS-4] Error 47 [6] occurred at disk power-on lifetime: 20790 hours (866 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 20 00 01 00 00 00 00 00 3f e0 00 00:00:23.018 READ DMA EXT 25 00 20 00 01 00 00 00 00 00 00 e0 00 00:00:23.018 READ DMA EXT c6 00 20 00 10 00 0f 00 00 00 01 ef 00 00:00:23.010 SET MULTIPLE MODE 91 00 20 00 3f 00 0f 00 00 00 01 ef 00 00:00:15.234 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 01 00 00 00 01 e1 00 00:00:14.846 RECALIBRATE [OBS-4] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported