/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue EIDE Device Model: WDC WD1600AAJB-00PVA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 00.07H00 User Capacity: 160 041 885 696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Fri Dec 18 16:41:55 2015 YEKT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 58) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SCT capabilities: (0x203f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 740 3 Spin_Up_Time PO---- 160 157 021 - 2966 4 Start_Stop_Count -O--CK 096 096 000 - 4912 5 Reallocated_Sector_Ct PO--CK 188 188 140 - 91 7 Seek_Error_Rate -OSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 079 079 000 - 15459 10 Spin_Retry_Count -O--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4743 192 Power-Off_Retract_Count -O--CK 194 194 000 - 4939 193 Load_Cycle_Count -O--CK 197 197 000 - 9115 194 Temperature_Celsius -O---K 118 099 000 - 25 196 Reallocated_Event_Count -O--CK 187 187 000 - 13 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 9 200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 12 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 907 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 907 [18] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 00 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 b6 25 2f d1 00 00 00 00 00 01 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 00 00 00 fc 2f b4 02 d1 35 00 01 00 00:00:15.360 NOP [Abort queued commands] 02 b1 35 2f d1 00 00 00 fc 00 01 00 02 05:31:51.091 [RESERVED] 00 00 00 00 fc 2f 93 02 d1 35 00 01 00 00:01:04.512 NOP [Abort queued commands] Error 906 [17] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 00 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 6e 25 2f c8 00 00 00 00 00 01 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 80 00 00 04 2f 6d 00 c8 25 00 01 00 00:00:15.360 NOP [Abort queued commands] 02 6a 35 2f c8 00 00 00 cc 00 01 00 02 05:31:48.716 [RESERVED] 00 00 00 00 cc 2f 69 02 c8 35 00 01 00 00:00:52.224 NOP [Abort queued commands] Error 905 [16] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 98 25 38 74 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 80 00 00 fd 38 8e 01 74 25 00 00 00 00:00:38.152 NOP [Abort queued commands] 00 86 25 38 74 00 08 00 35 00 00 00 00 01:01:39.853 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 25 38 86 02 74 25 00 00 00 00:00:48.392 NOP [Abort queued commands] Error 904 [15] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 2d 25 38 6d 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 c5 38 2d 00 6d 35 00 00 00 00:00:38.152 NOP [Abort queued commands] 02 21 25 38 6d 00 40 00 e5 00 00 00 01 01:01:37.964 [RESERVED] 00 08 00 00 bd 38 20 01 6d 25 00 00 00 00:00:27.984 NOP [Abort queued commands] Error 903 [14] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 cc 25 38 65 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 18 00 00 05 38 cc 01 65 25 00 00 00 00:00:38.152 NOP [Abort queued commands] 01 cb 25 38 65 00 08 00 8d 00 00 00 01 01:01:36.076 [RESERVED] 00 40 00 00 a5 38 bd 02 65 25 00 00 00 00:00:32.008 NOP [Abort queued commands] Error 902 [13] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 93 25 38 4b 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 d5 38 8a 01 4b 25 00 00 00 00:00:38.152 NOP [Abort queued commands] 01 82 35 38 4b 00 08 00 7d 00 00 00 00 01:01:29.346 [RESERVED] 00 08 00 00 4d 38 82 00 4b 35 00 00 00 00:00:13.576 NOP [Abort queued commands] Error 901 [12] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 10 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 fe 25 38 43 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 40 00 00 25 38 f3 02 43 25 00 00 00 00:00:36.112 NOP [Abort queued commands] 01 e2 25 38 43 00 08 00 1d 00 00 00 02 01:01:27.405 [RESERVED] 00 08 00 00 4d 38 dc 01 43 25 00 00 00 00:00:58.688 NOP [Abort queued commands] Error 900 [11] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 78 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 29 25 20 88 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 e5 20 29 01 88 25 00 00 00 00:01:00.792 NOP [Abort queued commands] 10 14 25 20 88 00 08 00 af 00 00 00 0e 00:35:32.009 RECALIBRATE [OBS-4] 00 30 00 00 3f 20 13 0c 88 35 00 00 00 00:00:16.136 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 80% 4329 - # 2 Short offline Completed without error 00% 4207 - # 3 Extended offline Completed without error 00% 4100 - # 4 Short offline Completed without error 00% 4099 - # 5 Short offline Completed without error 00% 4099 - # 6 Short offline Completed without error 00% 4082 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 15/25 Celsius Lifetime Min/Max Temperature: 16/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (7) Index Estimated Time Temperature Celsius 8 2015-12-18 14:34 36 ***************** ... ..( 6 skipped). .. ***************** 15 2015-12-18 14:41 36 ***************** 16 2015-12-18 14:42 35 **************** ... ..( 18 skipped). .. **************** 35 2015-12-18 15:01 35 **************** 36 2015-12-18 15:02 34 *************** 37 2015-12-18 15:03 34 *************** 38 2015-12-18 15:04 34 *************** 39 2015-12-18 15:05 35 **************** ... ..( 3 skipped). .. **************** 43 2015-12-18 15:09 35 **************** 44 2015-12-18 15:10 34 *************** ... ..( 30 skipped). .. *************** 75 2015-12-18 15:41 34 *************** 76 2015-12-18 15:42 35 **************** ... ..( 37 skipped). .. **************** 114 2015-12-18 16:20 35 **************** 115 2015-12-18 16:21 36 ***************** 116 2015-12-18 16:22 ? - 117 2015-12-18 16:23 15 - 118 2015-12-18 16:24 16 - 119 2015-12-18 16:25 17 - 120 2015-12-18 16:26 18 - 121 2015-12-18 16:27 18 - 122 2015-12-18 16:28 19 - 123 2015-12-18 16:29 20 * 124 2015-12-18 16:30 20 * 125 2015-12-18 16:31 21 ** 126 2015-12-18 16:32 21 ** 127 2015-12-18 16:33 22 *** 0 2015-12-18 16:34 22 *** 1 2015-12-18 16:35 23 **** 2 2015-12-18 16:36 23 **** 3 2015-12-18 16:37 23 **** 4 2015-12-18 16:38 24 ***** 5 2015-12-18 16:39 24 ***** 6 2015-12-18 16:40 25 ****** 7 2015-12-18 16:41 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD2500AAJS-00L7A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.03E01 User Capacity: 250 059 350 016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Fri Dec 18 16:41:55 2015 YEKT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 68) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 198 051 - 285 3 Spin_Up_Time POS--K 135 132 021 - 4225 4 Start_Stop_Count -O--CK 096 096 000 - 4720 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 087 087 000 - 10019 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3810 192 Power-Off_Retract_Count -O--CK 198 198 000 - 1529 193 Load_Cycle_Count -O--CK 199 199 000 - 4720 194 Temperature_Celsius -O---K 117 087 000 - 26 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 15750 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 5886 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5886 [5] occurred at disk power-on lifetime: 1303 hours (54 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 0f 05 00 5c 30 e0 00 Error: UNC 8 sectors at LBA = 0xf05005c30 = 64508419120 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 0f 05 00 5c 30 e0 00 00:01:45.615 READ DMA EXT 25 00 00 00 08 00 0f 05 00 5c 30 e0 00 00:01:43.283 READ DMA EXT 25 00 00 00 08 00 0f 05 00 5c 20 e0 00 00:01:43.282 READ DMA EXT 25 00 00 00 08 00 0f 05 00 5c 18 e0 00 00:01:43.268 READ DMA EXT 25 00 00 00 08 00 0f 14 00 00 40 e0 00 00:01:43.267 READ DMA EXT Error 5885 [4] occurred at disk power-on lifetime: 1303 hours (54 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 0f 05 00 5c 30 e0 00 Error: UNC 8 sectors at LBA = 0xf05005c30 = 64508419120 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 0f 05 00 5c 30 e0 00 00:01:43.283 READ DMA EXT 25 00 00 00 08 00 0f 05 00 5c 20 e0 00 00:01:43.282 READ DMA EXT 25 00 00 00 08 00 0f 05 00 5c 18 e0 00 00:01:43.268 READ DMA EXT 25 00 00 00 08 00 0f 14 00 00 40 e0 00 00:01:43.267 READ DMA EXT 25 00 00 00 08 00 0f 14 00 60 30 e0 00 00:01:43.257 READ DMA EXT Error 5884 [3] occurred at disk power-on lifetime: 836 hours (34 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 7f 00 07 21 00 b1 af e0 00 Error: UNC 127 sectors at LBA = 0x72100b1af = 30618464687 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 7f 00 07 21 00 b1 af e0 00 05:53:49.490 READ DMA EXT 25 00 00 00 7f 00 07 21 00 b1 30 e0 00 05:53:49.489 READ DMA EXT 25 00 00 00 7f 00 07 20 00 b1 b1 e0 00 05:53:49.488 READ DMA EXT 25 00 00 00 7f 00 07 20 00 b1 32 e0 00 05:53:49.488 READ DMA EXT 25 00 00 00 7f 00 07 1f 00 b1 b3 e0 00 05:53:49.487 READ DMA EXT Error 5883 [2] occurred at disk power-on lifetime: 829 hours (34 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 01 1a 00 e4 ce e0 00 Error: UNC at LBA = 0x11a00e4ce = 4731233486 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da d8 00 01 00 01 1a 00 e4 ce e0 00 13:06:53.473 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 06 79 00 1a 66 e0 00 13:06:53.472 READ DMA EXT 42 da d8 00 01 00 01 1a 00 e4 cd e0 00 13:06:53.472 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 13:06:53.472 READ DMA EXT 42 da d8 00 02 00 01 1a 00 e4 cd e0 00 13:06:51.291 READ VERIFY SECTOR(S) EXT Error 5882 [1] occurred at disk power-on lifetime: 829 hours (34 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 01 1a 00 e4 cd e0 00 Error: UNC at LBA = 0x11a00e4cd = 4731233485 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da d8 00 02 00 01 1a 00 e4 cd e0 00 13:06:51.291 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 13:06:51.291 READ DMA EXT 42 da d8 00 02 00 01 1a 00 e4 cb e0 00 13:06:51.291 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 13:06:51.291 READ DMA EXT 42 da d8 00 04 00 01 1a 00 e4 cb e0 00 13:06:48.967 READ VERIFY SECTOR(S) EXT Error 5881 [0] occurred at disk power-on lifetime: 829 hours (34 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 04 00 01 1a 00 e4 cb e0 00 Error: UNC at LBA = 0x11a00e4cb = 4731233483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da d8 00 04 00 01 1a 00 e4 cb e0 00 13:06:48.967 READ VERIFY SECTOR(S) EXT 42 da d8 00 04 00 01 1a 00 e4 c7 e0 00 13:06:48.967 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 06 79 00 1a 66 e0 00 13:06:48.967 READ DMA EXT 42 da d8 00 08 00 01 1a 00 e4 c7 e0 00 13:06:46.640 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 13:06:46.640 READ DMA EXT Error 5880 [23] occurred at disk power-on lifetime: 829 hours (34 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 01 1a 00 e4 c7 e0 00 Error: UNC at LBA = 0x11a00e4c7 = 4731233479 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da d8 00 08 00 01 1a 00 e4 c7 e0 00 13:06:46.640 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 13:06:46.640 READ DMA EXT 42 da d8 00 08 00 01 1a 00 e4 bf e0 00 13:06:46.640 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 13:06:46.640 READ DMA EXT 42 da d8 00 10 00 01 1a 00 e4 cf e0 00 13:06:46.629 READ VERIFY SECTOR(S) EXT Error 5879 [22] occurred at disk power-on lifetime: 829 hours (34 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 01 1a 00 e4 3f e0 00 Error: UNC at LBA = 0x11a00e43f = 4731233343 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da d8 01 00 00 01 1a 00 e4 3f e0 00 13:06:35.066 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 13:06:35.056 READ DMA EXT 42 da d8 02 00 00 01 1a 00 e4 3f e0 00 13:06:32.578 READ VERIFY SECTOR(S) EXT 42 da d8 02 00 00 01 18 00 e4 3f e0 00 13:06:32.575 READ VERIFY SECTOR(S) EXT 42 da d8 02 00 00 01 16 00 e4 3f e0 00 13:06:32.572 READ VERIFY SECTOR(S) EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 15/26 Celsius Lifetime Min/Max Temperature: 16/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (285) Index Estimated Time Temperature Celsius 286 2015-12-18 08:44 35 **************** 287 2015-12-18 08:45 35 **************** 288 2015-12-18 08:46 ? - 289 2015-12-18 08:47 34 *************** 290 2015-12-18 08:48 ? - 291 2015-12-18 08:49 17 - 292 2015-12-18 08:50 17 - 293 2015-12-18 08:51 19 - 294 2015-12-18 08:52 19 - 295 2015-12-18 08:53 20 * 296 2015-12-18 08:54 21 ** 297 2015-12-18 08:55 21 ** 298 2015-12-18 08:56 22 *** 299 2015-12-18 08:57 23 **** 300 2015-12-18 08:58 23 **** 301 2015-12-18 08:59 25 ****** 302 2015-12-18 09:00 25 ****** 303 2015-12-18 09:01 25 ****** 304 2015-12-18 09:02 26 ******* 305 2015-12-18 09:03 26 ******* 306 2015-12-18 09:04 26 ******* 307 2015-12-18 09:05 27 ******** 308 2015-12-18 09:06 27 ******** 309 2015-12-18 09:07 28 ********* 310 2015-12-18 09:08 29 ********** ... ..( 3 skipped). .. ********** 314 2015-12-18 09:12 29 ********** 315 2015-12-18 09:13 30 *********** ... ..( 3 skipped). .. *********** 319 2015-12-18 09:17 30 *********** 320 2015-12-18 09:18 31 ************ ... ..( 2 skipped). .. ************ 323 2015-12-18 09:21 31 ************ 324 2015-12-18 09:22 32 ************* ... ..( 2 skipped). .. ************* 327 2015-12-18 09:25 32 ************* 328 2015-12-18 09:26 33 ************** ... ..( 8 skipped). .. ************** 337 2015-12-18 09:35 33 ************** 338 2015-12-18 09:36 34 *************** ... ..( 31 skipped). .. *************** 370 2015-12-18 10:08 34 *************** 371 2015-12-18 10:09 35 **************** ... ..( 3 skipped). .. **************** 375 2015-12-18 10:13 35 **************** 376 2015-12-18 10:14 37 ****************** 377 2015-12-18 10:15 36 ***************** 378 2015-12-18 10:16 35 **************** 379 2015-12-18 10:17 35 **************** 380 2015-12-18 10:18 34 *************** ... ..( 2 skipped). .. *************** 383 2015-12-18 10:21 34 *************** 384 2015-12-18 10:22 33 ************** 385 2015-12-18 10:23 33 ************** 386 2015-12-18 10:24 32 ************* 387 2015-12-18 10:25 32 ************* 388 2015-12-18 10:26 32 ************* 389 2015-12-18 10:27 31 ************ ... ..( 6 skipped). .. ************ 396 2015-12-18 10:34 31 ************ 397 2015-12-18 10:35 30 *********** ... ..( 67 skipped). .. *********** 465 2015-12-18 11:43 30 *********** 466 2015-12-18 11:44 ? - 467 2015-12-18 11:45 30 *********** 468 2015-12-18 11:46 30 *********** 469 2015-12-18 11:47 30 *********** 470 2015-12-18 11:48 31 ************ 471 2015-12-18 11:49 32 ************* 472 2015-12-18 11:50 33 ************** 473 2015-12-18 11:51 33 ************** 474 2015-12-18 11:52 33 ************** 475 2015-12-18 11:53 34 *************** ... ..( 2 skipped). .. *************** 0 2015-12-18 11:56 34 *************** 1 2015-12-18 11:57 35 **************** 2 2015-12-18 11:58 35 **************** 3 2015-12-18 11:59 35 **************** 4 2015-12-18 12:00 36 ***************** ... ..( 3 skipped). .. ***************** 8 2015-12-18 12:04 36 ***************** 9 2015-12-18 12:05 37 ****************** ... ..( 6 skipped). .. ****************** 16 2015-12-18 12:12 37 ****************** 17 2015-12-18 12:13 38 ******************* ... ..( 25 skipped). .. ******************* 43 2015-12-18 12:39 38 ******************* 44 2015-12-18 12:40 39 ******************** 45 2015-12-18 12:41 38 ******************* ... ..( 3 skipped). .. ******************* 49 2015-12-18 12:45 38 ******************* 50 2015-12-18 12:46 39 ******************** 51 2015-12-18 12:47 39 ******************** 52 2015-12-18 12:48 38 ******************* ... ..( 52 skipped). .. ******************* 105 2015-12-18 13:41 38 ******************* 106 2015-12-18 13:42 37 ****************** ... ..( 29 skipped). .. ****************** 136 2015-12-18 14:12 37 ****************** 137 2015-12-18 14:13 36 ***************** ... ..( 75 skipped). .. ***************** 213 2015-12-18 15:29 36 ***************** 214 2015-12-18 15:30 37 ****************** ... ..( 24 skipped). .. ****************** 239 2015-12-18 15:55 37 ****************** 240 2015-12-18 15:56 ? - 241 2015-12-18 15:57 15 - 242 2015-12-18 15:58 16 - 243 2015-12-18 15:59 17 - 244 2015-12-18 16:00 18 - 245 2015-12-18 16:01 19 - 246 2015-12-18 16:02 20 * 247 2015-12-18 16:03 20 * 248 2015-12-18 16:04 21 ** 249 2015-12-18 16:05 21 ** 250 2015-12-18 16:06 22 *** 251 2015-12-18 16:07 22 *** 252 2015-12-18 16:08 23 **** 253 2015-12-18 16:09 24 ***** 254 2015-12-18 16:10 24 ***** 255 2015-12-18 16:11 25 ****** 256 2015-12-18 16:12 25 ****** 257 2015-12-18 16:13 26 ******* 258 2015-12-18 16:14 26 ******* 259 2015-12-18 16:15 30 *********** 260 2015-12-18 16:16 ? - 261 2015-12-18 16:17 30 *********** 262 2015-12-18 16:18 30 *********** 263 2015-12-18 16:19 30 *********** 264 2015-12-18 16:20 31 ************ 265 2015-12-18 16:21 32 ************* 266 2015-12-18 16:22 32 ************* 267 2015-12-18 16:23 33 ************** 268 2015-12-18 16:24 33 ************** 269 2015-12-18 16:25 34 *************** ... ..( 4 skipped). .. *************** 274 2015-12-18 16:30 34 *************** 275 2015-12-18 16:31 35 **************** 276 2015-12-18 16:32 35 **************** 277 2015-12-18 16:33 35 **************** 278 2015-12-18 16:34 36 ***************** ... ..( 2 skipped). .. ***************** 281 2015-12-18 16:37 36 ***************** 282 2015-12-18 16:38 38 ******************* 283 2015-12-18 16:39 37 ****************** 284 2015-12-18 16:40 36 ***************** 285 2015-12-18 16:41 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x8000 4 1080 Vendor specific