[ 7.214] X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 [ 7.214] Current Operating System: Linux XXX 6.8.0-57-generic #59-Ubuntu SMP PREEMPT_DYNAMIC Sat Mar 15 17:40:59 UTC 2025 x86_64 [ 7.214] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-57-generic root=UUID=HASH_00D-EBE6-49E5-2627-8F0E67F1F2D0 ro quiet splash [ 7.214] xorg-server 2:21.1.12-1ubuntu1.3 (For technical support please see http://www.ubuntu.com/support) [ 7.214] Current version of pixman: 0.42.2 [ 7.214] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 7.214] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7.214] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 20 18:17:57 2025 [ 7.216] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 7.216] (==) No Layout section. Using the first Screen section. [ 7.216] (==) No screen section available. Using defaults. [ 7.216] (**) |-->Screen "Default Screen Section" (0) [ 7.216] (**) | |-->Monitor "<default monitor>" [ 7.218] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 7.218] (**) Allowing byte-swapped clients [ 7.218] (==) Automatically adding devices [ 7.218] (==) Automatically enabling devices [ 7.218] (==) Automatically adding GPU devices [ 7.218] (==) Automatically binding GPU devices [ 7.218] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 7.218] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 7.218] Entry deleted from font path. [ 7.218] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 7.218] Entry deleted from font path. [ 7.218] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 7.218] Entry deleted from font path. [ 7.218] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 7.218] Entry deleted from font path. [ 7.218] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 7.218] Entry deleted from font path. [ 7.218] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 7.218] (==) ModulePath set to "/usr/lib/xorg/modules" [ 7.218] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 7.218] (II) Loader magic: 0x5678b76e2020 [ 7.218] (II) Module ABI versions: [ 7.218] X.Org ANSI C Emulation: 0.4 [ 7.218] X.Org Video Driver: 25.2 [ 7.218] X.Org XInput driver : 24.4 [ 7.218] X.Org Server Extension : 10.0 [ 7.220] (++) using VT number 7 [ 7.220] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 7.220] (II) xfree86: Adding drm device (/dev/dri/card1) [ 7.220] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1 [ 7.273] (--) PCI:*(0@0:2:0) 8086:9a49:8086:3002 rev 1, Mem @ 0x603c000000/16777216, 0x4000000000/1073741824, I/O @ 0x00003000/64, BIOS @ 0x????????/131072 [ 7.273] (II) LoadModule: "glx" [ 7.274] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 7.283] (II) Module glx: vendor="X.Org Foundation" [ 7.283] compiled for 1.21.1.11, module version = 1.0.0 [ 7.283] ABI class: X.Org Server Extension, version 10.0 [ 7.283] (==) Matched modesetting as autoconfigured driver 0 [ 7.283] (==) Matched fbdev as autoconfigured driver 1 [ 7.283] (==) Matched vesa as autoconfigured driver 2 [ 7.283] (==) Assigned the driver to the xf86ConfigLayout [ 7.283] (II) LoadModule: "modesetting" [ 7.283] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 7.285] (II) Module modesetting: vendor="X.Org Foundation" [ 7.285] compiled for 1.21.1.11, module version = 1.21.1 [ 7.285] Module class: X.Org Video Driver [ 7.285] ABI class: X.Org Video Driver, version 25.2 [ 7.285] (II) LoadModule: "fbdev" [ 7.285] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 7.285] (II) Module fbdev: vendor="X.Org Foundation" [ 7.285] compiled for 1.21.1.11, module version = 0.5.0 [ 7.285] Module class: X.Org Video Driver [ 7.285] ABI class: X.Org Video Driver, version 25.2 [ 7.285] (II) LoadModule: "vesa" [ 7.285] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 7.285] (II) Module vesa: vendor="X.Org Foundation" [ 7.286] compiled for 1.21.1.7, module version = 2.6.0 [ 7.286] Module class: X.Org Video Driver [ 7.286] ABI class: X.Org Video Driver, version 25.2 [ 7.286] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 7.286] (II) FBDEV: driver for framebuffer: fbdev [ 7.286] (II) VESA: driver for VESA chipsets: vesa [ 7.319] (II) modeset(0): using drv /dev/dri/card1 [ 7.319] (WW) Falling back to old probe method for fbdev [ 7.319] (II) Loading sub module "fbdevhw" [ 7.319] (II) LoadModule: "fbdevhw" [ 7.319] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 7.320] (II) Module fbdevhw: vendor="X.Org Foundation" [ 7.320] compiled for 1.21.1.11, module version = 0.0.2 [ 7.320] ABI class: X.Org Video Driver, version 25.2 [ 7.321] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 7.321] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 7.321] (==) modeset(0): RGB weight 888 [ 7.321] (==) modeset(0): Default visual is TrueColor [ 7.321] (II) Loading sub module "glamoregl" [ 7.321] (II) LoadModule: "glamoregl" [ 7.321] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 7.422] (II) Module glamoregl: vendor="X.Org Foundation" [ 7.422] compiled for 1.21.1.11, module version = 1.0.1 [ 7.422] ABI class: X.Org ANSI C Emulation, version 0.4 [ 7.453] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Xe Graphics (TGL GT2) [ 7.453] (II) modeset(0): glamor initialized [ 7.453] (==) modeset(0): VariableRefresh: disabled [ 7.453] (==) modeset(0): AsyncFlipSecondaries: disabled [ 7.453] (II) modeset(0): Output HDMI-1 has no monitor section [ 7.487] (II) modeset(0): Output DP-1 has no monitor section [ 7.487] (II) modeset(0): Output DP-2 has no monitor section [ 7.487] (II) modeset(0): Output DP-3 has no monitor section [ 7.487] (II) modeset(0): Output DP-4 has no monitor section [ 7.488] (II) modeset(0): EDID for output HDMI-1 [ 7.522] (II) modeset(0): EDID for output DP-1 [ 7.522] (II) modeset(0): Manufacturer: DEL Model: 407e Serial#: ... [ 7.522] (II) modeset(0): Year: 2012 Week: 45 [ 7.522] (II) modeset(0): EDID Version: 1.3 [ 7.522] (II) modeset(0): Digital Display Input [ 7.522] (II) modeset(0): Max Image Size [cm]: horiz.: 60 vert.: 34 [ 7.522] (II) modeset(0): Gamma: 2.20 [ 7.522] (II) modeset(0): DPMS capabilities: StandBy Suspend Off [ 7.522] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 7.522] (II) modeset(0): First detailed timing is preferred mode [ 7.522] (II) modeset(0): redX: 0.653 redY: 0.336 greenX: 0.295 greenY: 0.640 [ 7.522] (II) modeset(0): blueX: 0.146 blueY: 0.042 whiteX: 0.313 whiteY: 0.329 [ 7.522] (II) modeset(0): Supported established timings: [ 7.522] (II) modeset(0): 720x400@70Hz [ 7.522] (II) modeset(0): 640x480@60Hz [ 7.522] (II) modeset(0): 640x480@75Hz [ 7.522] (II) modeset(0): 800x600@60Hz [ 7.522] (II) modeset(0): 800x600@75Hz [ 7.522] (II) modeset(0): 1024x768@60Hz [ 7.522] (II) modeset(0): 1024x768@75Hz [ 7.522] (II) modeset(0): 1280x1024@75Hz [ 7.522] (II) modeset(0): Manufacturer's mask: 0 [ 7.522] (II) modeset(0): Supported standard timings: [ 7.522] (II) modeset(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 7.522] (II) modeset(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 7.522] (II) modeset(0): #2: hsize: 1920 vsize 1200 refresh: 60 vid: 209 [ 7.522] (II) modeset(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 7.522] (II) modeset(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 7.522] (II) modeset(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 7.522] (II) modeset(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 7.522] (II) modeset(0): Supported detailed timing: [ 7.522] (II) modeset(0): clock: 241.5 MHz Image Size: 597 x 336 mm [ 7.522] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 7.522] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0 [ 7.522] (II) modeset(0): Serial No: GK0KD2B5137L [ 7.522] (II) modeset(0): Monitor name: DELL U2713HM [ 7.522] (II) modeset(0): Ranges: V min: 49 V max: 86 Hz, H min: 29 H max: 113 kHz, PixClock max 285 MHz [ 7.522] (II) modeset(0): EDID (in hex): [ 7.522] (II) modeset(0): 00ffffffffffff0010ac7e404c373331 [ 7.522] (II) modeset(0): 2d160103803c2278ea4bb5a7564ba325 [ 7.522] (II) modeset(0): 0a5054a54b008100b300d100714fa940 [ 7.522] (II) modeset(0): 8180d1c00101565e00a0a0a029503020 [ 7.522] (II) modeset(0): 350055502100001a000000ff00474b30 [ 7.522] (II) modeset(0): 4b443242353133374c0a000000fc0044 [ 7.522] (II) modeset(0): 454c4c205532373133484d0a000000fd [ 7.522] (II) modeset(0): 0031561d711c000a20202020202000dc [ 7.522] (II) modeset(0): Printing probed modes for output DP-1 [ 7.522] (II) modeset(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP) [ 7.522] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e) [ 7.522] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 7.522] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 7.522] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 7.522] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 7.522] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 7.522] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 7.522] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 7.522] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 7.522] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 7.522] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 7.522] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 7.522] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 7.522] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 7.522] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 7.522] (II) modeset(0): EDID for output DP-2 [ 7.522] (II) modeset(0): EDID for output DP-3 [ 7.522] (II) modeset(0): EDID for output DP-4 [ 7.522] (II) modeset(0): Output HDMI-1 disconnected [ 7.522] (II) modeset(0): Output DP-1 connected [ 7.522] (II) modeset(0): Output DP-2 disconnected [ 7.522] (II) modeset(0): Output DP-3 disconnected [ 7.522] (II) modeset(0): Output DP-4 disconnected [ 7.522] (II) modeset(0): Using exact sizes for initial modes [ 7.522] (II) modeset(0): Output DP-1 using initial mode 2560x1440 +0+0 [ 7.522] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 7.522] (==) modeset(0): DPI set to (96, 96) [ 7.522] (II) Loading sub module "fb" [ 7.522] (II) LoadModule: "fb" [ 7.522] (II) Module "fb" already built-in [ 7.522] (II) UnloadModule: "fbdev" [ 7.522] (II) Unloading fbdev [ 7.522] (II) UnloadSubModule: "fbdevhw" [ 7.523] (II) Unloading fbdevhw [ 7.523] (II) UnloadModule: "vesa" [ 7.523] (II) Unloading vesa [ 7.546] (==) modeset(0): Backing store enabled [ 7.546] (==) modeset(0): Silken mouse enabled [ 7.654] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 7.654] (==) modeset(0): DPMS enabled [ 7.654] (II) modeset(0): [DRI2] Setup complete [ 7.654] (II) modeset(0): [DRI2] DRI driver: iris [ 7.654] (II) modeset(0): [DRI2] VDPAU driver: va_gl [ 7.654] (II) Initializing extension Generic Event Extension [ 7.654] (II) Initializing extension SHAPE [ 7.655] (II) Initializing extension MIT-SHM [ 7.655] (II) Initializing extension XInputExtension [ 7.657] (II) Initializing extension XTEST [ 7.657] (II) Initializing extension BIG-REQUESTS [ 7.658] (II) Initializing extension SYNC [ 7.658] (II) Initializing extension XKEYBOARD [ 7.658] (II) Initializing extension XC-MISC [ 7.658] (II) Initializing extension SECURITY [ 7.659] (II) Initializing extension XFIXES [ 7.659] (II) Initializing extension RENDER [ 7.659] (II) Initializing extension RANDR [ 7.659] (II) Initializing extension COMPOSITE [ 7.660] (II) Initializing extension DAMAGE [ 7.660] (II) Initializing extension MIT-SCREEN-SAVER [ 7.660] (II) Initializing extension DOUBLE-BUFFER [ 7.660] (II) Initializing extension RECORD [ 7.660] (II) Initializing extension DPMS [ 7.661] (II) Initializing extension Present [ 7.661] (II) Initializing extension DRI3 [ 7.661] (II) Initializing extension X-Resource [ 7.661] (II) Initializing extension XVideo [ 7.661] (II) Initializing extension XVideo-MotionCompensation [ 7.661] (II) Initializing extension SELinux [ 7.661] (II) SELinux: Disabled on system [ 7.662] (II) Initializing extension GLX [ 7.678] (II) AIGLX: Loaded and initialized iris [ 7.678] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 7.678] (II) Initializing extension XFree86-VidModeExtension [ 7.678] (II) Initializing extension XFree86-DGA [ 7.678] (II) Initializing extension XFree86-DRI [ 7.678] (II) Initializing extension DRI2 [ 7.678] (II) modeset(0): Damage tracking initialized [ 7.678] (II) modeset(0): Setting screen physical size to 677 x 381 [ 7.737] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 7.737] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 7.737] (II) LoadModule: "libinput" [ 7.737] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 7.741] (II) Module libinput: vendor="X.Org Foundation" [ 7.741] compiled for 1.21.1.11, module version = 1.4.0 [ 7.741] Module class: X.Org XInput Driver [ 7.741] ABI class: X.Org XInput driver, version 24.4 [ 7.741] (II) Using input driver 'libinput' for 'Power Button' [ 7.741] (**) Power Button: always reports core events [ 7.741] (**) Option "Device" "/dev/input/event2" [ 7.741] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 7.741] (II) event2 - Power Button: device is a keyboard [ 7.741] (II) event2 - Power Button: device removed [ 7.755] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 7.755] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 7.755] (**) Option "xkb_model" "pc105" [ 7.755] (**) Option "xkb_layout" "fr" [ 7.755] (**) Option "xkb_variant" "latin9" [ 7.780] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 7.780] (II) event2 - Power Button: device is a keyboard [ 7.780] (II) config/udev: Adding input device Video Bus (/dev/input/event3) [ 7.780] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 7.780] (II) Using input driver 'libinput' for 'Video Bus' [ 7.780] (**) Video Bus: always reports core events [ 7.780] (**) Option "Device" "/dev/input/event3" [ 7.780] (II) event3 - Video Bus: is tagged by udev as: Keyboard [ 7.780] (II) event3 - Video Bus: device is a keyboard [ 7.780] (II) event3 - Video Bus: device removed [ 7.786] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3" [ 7.786] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 7.786] (**) Option "xkb_model" "pc105" [ 7.786] (**) Option "xkb_layout" "fr" [ 7.786] (**) Option "xkb_variant" "latin9" [ 7.787] (II) event3 - Video Bus: is tagged by udev as: Keyboard [ 7.787] (II) event3 - Video Bus: device is a keyboard [ 7.789] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 7.789] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 7.789] (II) Using input driver 'libinput' for 'Power Button' [ 7.789] (**) Power Button: always reports core events [ 7.789] (**) Option "Device" "/dev/input/event1" [ 7.790] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 7.790] (II) event1 - Power Button: device is a keyboard [ 7.790] (II) event1 - Power Button: device removed [ 7.801] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 7.801] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 7.801] (**) Option "xkb_model" "pc105" [ 7.801] (**) Option "xkb_layout" "fr" [ 7.801] (**) Option "xkb_variant" "latin9" [ 7.801] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 7.801] (II) event1 - Power Button: device is a keyboard [ 7.802] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 7.802] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 7.802] (II) Using input driver 'libinput' for 'Sleep Button' [ 7.802] (**) Sleep Button: always reports core events [ 7.802] (**) Option "Device" "/dev/input/event0" [ 7.803] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 7.803] (II) event0 - Sleep Button: device is a keyboard [ 7.804] (II) event0 - Sleep Button: device removed [ 7.811] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 7.811] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 7.811] (**) Option "xkb_model" "pc105" [ 7.811] (**) Option "xkb_layout" "fr" [ 7.811] (**) Option "xkb_variant" "latin9" [ 7.812] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 7.812] (II) event0 - Sleep Button: device is a keyboard [ 7.814] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4) [ 7.814] (II) No input driver specified, ignoring this device. [ 7.814] (II) This device may have been added with another device file. [ 7.814] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event5) [ 7.814] (II) No input driver specified, ignoring this device. [ 7.814] (II) This device may have been added with another device file. [ 7.815] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event6) [ 7.815] (II) No input driver specified, ignoring this device. [ 7.815] (II) This device may have been added with another device file. [ 7.815] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event7) [ 7.815] (II) No input driver specified, ignoring this device. [ 7.815] (II) This device may have been added with another device file. [ 9.325] (II) modeset(0): EDID vendor "DEL", prod id 16510 [ 9.325] (II) modeset(0): Using EDID range info for horizontal sync [ 9.325] (II) modeset(0): Using EDID range info for vertical refresh [ 9.325] (II) modeset(0): Printing DDC gathered Modelines: [ 9.325] (II) modeset(0): Modeline "2560x1440"x0.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP) [ 9.326] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 9.326] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 9.326] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 9.326] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 9.326] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 9.326] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 9.326] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 9.326] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 9.326] (II) modeset(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 9.326] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 9.326] (II) modeset(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e) [ 9.326] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 9.326] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 9.326] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 9.326] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ 9.978] (II) modeset(0): EDID vendor "DEL", prod id 16510 [ 9.978] (II) modeset(0): Using hsync ranges from config file [ 9.978] (II) modeset(0): Using vrefresh ranges from config file [ 9.978] (II) modeset(0): Printing DDC gathered Modelines: [ 9.978] (II) modeset(0): Modeline "2560x1440"x0.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP) [ 9.978] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 9.978] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 9.978] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 9.978] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 9.978] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 9.978] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 9.978] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 9.978] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 9.978] (II) modeset(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 9.978] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 9.978] (II) modeset(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e) [ 9.978] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 9.978] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 9.978] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 9.978] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ 43.060] (II) config/udev: Adding input device MOSART Semi. 2.4G RF Keyboard & Mouse (/dev/input/mouse0) [ 43.060] (II) No input driver specified, ignoring this device. [ 43.060] (II) This device may have been added with another device file. [ 43.080] (II) config/udev: Adding input device MOSART Semi. 2.4G RF Keyboard & Mouse System Control (/dev/input/event11) [ 43.080] (**) MOSART Semi. 2.4G RF Keyboard & Mouse System Control: Applying InputClass "libinput keyboard catchall" [ 43.080] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G RF Keyboard & Mouse System Control' [ 43.080] (**) MOSART Semi. 2.4G RF Keyboard & Mouse System Control: always reports core events [ 43.080] (**) Option "Device" "/dev/input/event11" [ 43.081] (II) event11 - MOSART Semi. 2.4G RF Keyboard & Mouse System Control: is tagged by udev as: Keyboard [ 43.082] (II) event11 - MOSART Semi. 2.4G RF Keyboard & Mouse System Control: device is a keyboard [ 43.082] (II) event11 - MOSART Semi. 2.4G RF Keyboard & Mouse System Control: device removed [ 43.090] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.1/3-7.1:1.1/0003:3938:1032.0002/input/input11/event11" [ 43.090] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G RF Keyboard & Mouse System Control" (type: KEYBOARD, id 10) [ 43.090] (**) Option "xkb_model" "pc105" [ 43.090] (**) Option "xkb_layout" "fr" [ 43.090] (**) Option "xkb_variant" "latin9" [ 43.090] (WW) Option "xkb_options" requires a string value [ 43.091] (II) event11 - MOSART Semi. 2.4G RF Keyboard & Mouse System Control: is tagged by udev as: Keyboard [ 43.091] (II) event11 - MOSART Semi. 2.4G RF Keyboard & Mouse System Control: device is a keyboard [ 43.091] (II) config/udev: Adding input device MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control (/dev/input/event10) [ 43.091] (**) MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: Applying InputClass "libinput keyboard catchall" [ 43.091] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control' [ 43.091] (**) MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: always reports core events [ 43.091] (**) Option "Device" "/dev/input/event10" [ 43.092] (II) event10 - MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: is tagged by udev as: Keyboard [ 43.092] (II) event10 - MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: device is a keyboard [ 43.092] (II) event10 - MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: device removed [ 43.103] (II) libinput: MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: needs a virtual subdevice [ 43.103] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.1/3-7.1:1.1/0003:3938:1032.0002/input/input10/event10" [ 43.103] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control" (type: MOUSE, id 11) [ 43.103] (**) Option "AccelerationScheme" "none" [ 43.103] (**) MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: (accel) selected scheme none/0 [ 43.103] (**) MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: (accel) acceleration factor: 2.000 [ 43.103] (**) MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: (accel) acceleration threshold: 4 [ 43.104] (II) event10 - MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: is tagged by udev as: Keyboard [ 43.104] (II) event10 - MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: device is a keyboard [ 43.104] (**) MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: Applying InputClass "libinput keyboard catchall" [ 43.104] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control' [ 43.104] (**) MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: always reports core events [ 43.104] (**) Option "Device" "/dev/input/event10" [ 43.104] (II) libinput: MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: is a virtual subdevice [ 43.104] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.1/3-7.1:1.1/0003:3938:1032.0002/input/input10/event10" [ 43.104] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control" (type: KEYBOARD, id 12) [ 43.104] (**) Option "xkb_model" "pc105" [ 43.104] (**) Option "xkb_layout" "fr" [ 43.104] (**) Option "xkb_variant" "latin9" [ 43.104] (WW) Option "xkb_options" requires a string value [ 43.105] (II) config/udev: Adding input device MOSART Semi. 2.4G RF Keyboard & Mouse (/dev/input/event9) [ 43.105] (**) MOSART Semi. 2.4G RF Keyboard & Mouse: Applying InputClass "libinput pointer catchall" [ 43.105] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G RF Keyboard & Mouse' [ 43.105] (**) MOSART Semi. 2.4G RF Keyboard & Mouse: always reports core events [ 43.105] (**) Option "Device" "/dev/input/event9" [ 43.106] (II) event9 - MOSART Semi. 2.4G RF Keyboard & Mouse: is tagged by udev as: Mouse [ 43.106] (II) event9 - MOSART Semi. 2.4G RF Keyboard & Mouse: device is a pointer [ 43.106] (II) event9 - MOSART Semi. 2.4G RF Keyboard & Mouse: device removed [ 43.114] (II) libinput: MOSART Semi. 2.4G RF Keyboard & Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 43.114] (II) libinput: MOSART Semi. 2.4G RF Keyboard & Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 43.114] (II) libinput: MOSART Semi. 2.4G RF Keyboard & Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 43.114] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.1/3-7.1:1.1/0003:3938:1032.0002/input/input9/event9" [ 43.114] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G RF Keyboard & Mouse" (type: MOUSE, id 13) [ 43.114] (**) Option "AccelerationScheme" "none" [ 43.114] (**) MOSART Semi. 2.4G RF Keyboard & Mouse: (accel) selected scheme none/0 [ 43.114] (**) MOSART Semi. 2.4G RF Keyboard & Mouse: (accel) acceleration factor: 2.000 [ 43.114] (**) MOSART Semi. 2.4G RF Keyboard & Mouse: (accel) acceleration threshold: 4 [ 43.115] (II) event9 - MOSART Semi. 2.4G RF Keyboard & Mouse: is tagged by udev as: Mouse [ 43.115] (II) event9 - MOSART Semi. 2.4G RF Keyboard & Mouse: device is a pointer [ 43.116] (II) config/udev: Adding input device MOSART Semi. 2.4G RF Keyboard & Mouse (/dev/input/event12) [ 43.116] (II) No input driver specified, ignoring this device. [ 43.116] (II) This device may have been added with another device file. [ 43.118] (II) config/udev: Adding input device MOSART Semi. 2.4G RF Keyboard & Mouse (/dev/input/event8) [ 43.118] (**) MOSART Semi. 2.4G RF Keyboard & Mouse: Applying InputClass "libinput keyboard catchall" [ 43.118] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G RF Keyboard & Mouse' [ 43.118] (**) MOSART Semi. 2.4G RF Keyboard & Mouse: always reports core events [ 43.118] (**) Option "Device" "/dev/input/event8" [ 43.119] (II) event8 - MOSART Semi. 2.4G RF Keyboard & Mouse: is tagged by udev as: Keyboard [ 43.119] (II) event8 - MOSART Semi. 2.4G RF Keyboard & Mouse: device is a keyboard [ 43.119] (II) event8 - MOSART Semi. 2.4G RF Keyboard & Mouse: device removed [ 43.131] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.1/3-7.1:1.0/0003:3938:1032.0001/input/input8/event8" [ 43.131] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G RF Keyboard & Mouse" (type: KEYBOARD, id 14) [ 43.131] (**) Option "xkb_model" "pc105" [ 43.131] (**) Option "xkb_layout" "fr" [ 43.131] (**) Option "xkb_variant" "latin9" [ 43.131] (WW) Option "xkb_options" requires a string value [ 43.132] (II) event8 - MOSART Semi. 2.4G RF Keyboard & Mouse: is tagged by udev as: Keyboard [ 43.132] (II) event8 - MOSART Semi. 2.4G RF Keyboard & Mouse: device is a keyboard [ 1925.233] (II) config/udev: Adding input device USB Keyboard (/dev/input/event13) [ 1925.233] (**) USB Keyboard: Applying InputClass "libinput keyboard catchall" [ 1925.233] (II) Using input driver 'libinput' for ' USB Keyboard' [ 1925.233] (**) USB Keyboard: always reports core events [ 1925.233] (**) Option "Device" "/dev/input/event13" [ 1925.234] (II) event13 - USB Keyboard: is tagged by udev as: Keyboard [ 1925.234] (II) event13 - USB Keyboard: device is a keyboard [ 1925.234] (II) event13 - USB Keyboard: device removed [ 1925.243] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.2/3-7.2:1.0/0003:04D9:1603.0003/input/input14/event13" [ 1925.243] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 15) [ 1925.243] (**) Option "xkb_model" "pc105" [ 1925.243] (**) Option "xkb_layout" "fr" [ 1925.243] (**) Option "xkb_variant" "latin9" [ 1925.243] (WW) Option "xkb_options" requires a string value [ 1925.244] (II) event13 - USB Keyboard: is tagged by udev as: Keyboard [ 1925.244] (II) event13 - USB Keyboard: device is a keyboard [ 1925.245] (II) config/udev: Adding input device USB Keyboard Consumer Control (/dev/input/event15) [ 1925.245] (**) USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall" [ 1925.245] (II) Using input driver 'libinput' for ' USB Keyboard Consumer Control' [ 1925.245] (**) USB Keyboard Consumer Control: always reports core events [ 1925.245] (**) Option "Device" "/dev/input/event15" [ 1925.245] (II) event15 - USB Keyboard Consumer Control: is tagged by udev as: Keyboard [ 1925.245] (II) event15 - USB Keyboard Consumer Control: device is a keyboard [ 1925.245] (II) event15 - USB Keyboard Consumer Control: device removed [ 1925.254] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.2/3-7.2:1.1/0003:04D9:1603.0004/input/input16/event15" [ 1925.254] (II) XINPUT: Adding extended input device " USB Keyboard Consumer Control" (type: KEYBOARD, id 16) [ 1925.254] (**) Option "xkb_model" "pc105" [ 1925.254] (**) Option "xkb_layout" "fr" [ 1925.254] (**) Option "xkb_variant" "latin9" [ 1925.254] (WW) Option "xkb_options" requires a string value [ 1925.255] (II) event15 - USB Keyboard Consumer Control: is tagged by udev as: Keyboard [ 1925.255] (II) event15 - USB Keyboard Consumer Control: device is a keyboard [ 1925.255] (II) config/udev: Adding input device USB Keyboard System Control (/dev/input/event14) [ 1925.255] (**) USB Keyboard System Control: Applying InputClass "libinput keyboard catchall" [ 1925.255] (II) Using input driver 'libinput' for ' USB Keyboard System Control' [ 1925.255] (**) USB Keyboard System Control: always reports core events [ 1925.255] (**) Option "Device" "/dev/input/event14" [ 1925.256] (II) event14 - USB Keyboard System Control: is tagged by udev as: Keyboard [ 1925.256] (II) event14 - USB Keyboard System Control: device is a keyboard [ 1925.256] (II) event14 - USB Keyboard System Control: device removed [ 1925.265] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.2/3-7.2:1.1/0003:04D9:1603.0004/input/input15/event14" [ 1925.265] (II) XINPUT: Adding extended input device " USB Keyboard System Control" (type: KEYBOARD, id 17) [ 1925.265] (**) Option "xkb_model" "pc105" [ 1925.265] (**) Option "xkb_layout" "fr" [ 1925.265] (**) Option "xkb_variant" "latin9" [ 1925.265] (WW) Option "xkb_options" requires a string value [ 1925.266] (II) event14 - USB Keyboard System Control: is tagged by udev as: Keyboard [ 1925.266] (II) event14 - USB Keyboard System Control: device is a keyboard [ 2556.414] (II) event2 - Power Button: device removed [ 2556.419] (II) event3 - Video Bus: device removed [ 2556.429] (II) event1 - Power Button: device removed [ 2556.435] (II) event0 - Sleep Button: device removed [ 2556.441] (II) event11 - MOSART Semi. 2.4G RF Keyboard & Mouse System Control: device removed [ 2556.450] (II) event10 - MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control: device removed [ 2556.460] (II) event9 - MOSART Semi. 2.4G RF Keyboard & Mouse: device removed [ 2556.487] (II) event8 - MOSART Semi. 2.4G RF Keyboard & Mouse: device removed [ 2556.507] (II) event13 - USB Keyboard: device removed [ 2556.517] (II) event15 - USB Keyboard Consumer Control: device removed [ 2556.536] (II) event14 - USB Keyboard System Control: device removed [ 2556.547] (II) UnloadModule: "libinput" [ 2556.547] (II) UnloadModule: "libinput" [ 2556.547] (II) UnloadModule: "libinput" [ 2556.548] (II) UnloadModule: "libinput" [ 2556.548] (II) UnloadModule: "libinput" [ 2556.548] (II) UnloadModule: "libinput" [ 2556.548] (II) UnloadModule: "libinput" [ 2556.548] (II) UnloadModule: "libinput" [ 2556.548] (II) UnloadModule: "libinput" [ 2556.548] (II) UnloadModule: "libinput" [ 2556.548] (II) UnloadModule: "libinput" [ 2556.548] (II) UnloadModule: "libinput" [ 2556.636] (II) Server terminated successfully (0). Closing log file.